Commission Regulation (EEC) No 2472/90 of 31 July 1990 amending Annex I to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the common customs tariff

CHAPTER 79ZINC AND ARTICLES THEREOFNote1. In this chapter the following expressions have the meanings hereby assigned to them : (a) Bars and rods : Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including 'flattened circles' and 'modified rectangles', of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including 'modified rectangular') cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (b) Profiles : Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c) Wire : Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including 'flattened circles' and 'modified rectangles', of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including 'modified rectangular') cross-section exceeds one-tenth of the width. (d) Plates, sheets, strip and foil : Flat-surfaced products (other than the unwrought products of heading No 7901), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including 'modified rectangles' of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are : - of rectangular (including square) shape with a thickness not exceeding one-tenth of the width, - of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Heading No 7905 applies inter alia to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings. (e) Tubes and pipes : Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.Subheading note1. In this chapter the following expressions have the meanings hereby assigned to them : (a) Zinc, not alloyed : Metal containing by weight at least 97,5 % of zinc. (b) Zinc alloys : Metallic substances in which zinc predominates by weight over each of the other elements, provided that the total content by weight of such other elements exceeds 2,5 %. (c) Zinc dust : Dust obtained by condensation of zinc vapour, consisting of spherical particles which are finer than zinc powders. At least 80 % by weight of the particles pass through a sieve with 63 mm (microns) mesh. It must contain at least 85 % by weight of metallic zinc.

CHAPTER 80TIN AND ARTICLES THEREOFNote1. In this chapter the following expressions have the meanings hereby assigned to them : (a) Bars and rods : Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including 'flattened circles' and 'modified rectangles', of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including 'modified rectangular') cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (b) Profiles : Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c) Wire : Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including 'flattened circles' and 'modified rectangles', of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including 'modified rectangular') cross-section exceeds one-tenth of the width. (d) Plates, sheets, strip and foil : Flat-surfaced products (other than the unwrought products of heading No 8001), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including 'modified rectangles' of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are : - of rectangular (including square) shape with a thickness not exceeding one-tenth of the width, - of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Heading Nos 8004 and 8005 apply inter alia to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings. (e) Tubes and pipes : Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.Subheading note1. In this chapter the following expressions have the meanings hereby assigned to them : (a) Tin, not alloyed : Metal containing by weight at least 99 % of tin, provided that the content by weight of any bismuth or copper is less than the limit specified in the following table : Other elements Element Limiting content % by weight

Bi Bismuth Cu Copper 0,1 0,4

(b) Tin alloys : Metallic substances in which tin predominates by weight over each of the other elements, provided that : (i) the total content by weight of such other elements exceeds 1 %, or (ii) the content by weight of either bismuth or copper is equal to or greater than the limit specified in the foregoing table.

CHAPTER 81OTHER BASE METALS; CERMETS; ARTICLES THEREOFSubheading note1. Note 1 to Chapter 74, defining 'bars and rods', 'profiles', 'wire' and 'plates, sheets, strip and foil' applies mutatis mutandis to this chapter.

(0022)()

CHAPTER 82TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METALNotes1. Apart from blowlamps, portable forges, grinding wheels with frameworks, manicure and pedicure sets, and goods of heading No 8209, this chapter covers only articles with a blade, working edge, working surface or other working part of : (a) base metal; (b) metal carbides or cermets; (c) precious or semi-precious stones (natural, synthetic or reconstructed) on a support of base metal, metal carbide or cermet; or (d) abrasive materials on a support of base metal, provided that the articles have cutting teeth, flutes, grooves, or the like, of base metal, which retain their identity and function after the application of the abrasive.2. Parts of base metal of the articles of this chapter are to be classified with the articles of which they are parts, except parts separately specified as such and tool-holders for hand tools (heading No 8466). However, parts of general use as defined in note 2 to Section XV are in all cases excluded from this chapter. Heads, blades and cutting plates for electric shavers or electric hair clippers are to be classified in heading No 8510.3. Sets consisting of one or more knives of heading No 8211 and at least an equal number of articles of heading No 8215 are to be classified in heading No 8215.

(0599)()(0599)()(0599)()(0599)()

CHAPTER 83MISCELLANEOUS ARTICLES OF BASE METALNotes1. For the purposes of this chapter, parts of base metal are to be classified with their parent articles. However, articles of iron or steel of heading No 7312, 7315, 7317, 7318 or 7320, or similar articles of other base metal (Chapters 74 to 76 and 78 to 81) are not to be taken as parts of articles of this chapter.2. For the purposes of heading No 8302 the word 'castors' means those having a diameter (including, where appropriate, tyres) not exceeding 75 mm, or those having a diameter (including, where appropriate, tyres) exceeding 75 mm provided that the width of the wheels or tyre fitted thereto is less than 30 mm.

(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()

SECTION XVIMACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES

Notes1. This section does not cover : (a) transmission or conveyor belts or belting, of plastics of Chapter 39, or of vulcanized rubber (heading No 4010); or other articles of a kind used in machinery or mechanical or electrical appliances or for other technical uses, of vulcanized rubber other than hard rubber (heading No 4016); (b) articles of leather or of composition leather (heading No 4204) or of furskin (heading No 4303), of a kind used in machinery or mechanical appliances or for other technical uses; (c) bobbins, spools, cops, cones, cores, reels or similar supports, of any material (for example, Chapter 39, 40, 44 or 48 or Section XV); (d) perforated cards for Jacquard or similar machines (for example, Chapter 39 or 48 or Section XV); (e) transmission or conveyor belts of textile material (heading No 5910) or other articles of textile material for technical uses (heading No 5911); (f) precious or semi-precious stones (natural, synthetic or reconstructed) of heading Nos 7102 to 7104, or articles wholly of such stones of heading No 7116, except unmounted worked sapphires and diamonds for styli (heading No 8522); (g) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (h) drill pipe (heading No 7304); (ij) endless belts of metal wire or strip (Section XV); (k) articles of Chapter 82 or 83; (l) articles of Section XVII; (m) articles of Chapter 90; (n) clocks, watches or other articles of Chapter 91; (o) interchangeable tools of heading No 8207 or brushes of a kind used as parts of machines of heading No 9603; similar interchangeable tools are to be classified according to the constituent material of their working part (for example, in Chapter 40, 42, 43, 45 or 59 or heading No 6804 or 6909); or (p) articles of Chapter 95.2. Subject to note 1 to this section, note 1 to Chapter 84 and to note 1 to Chapter 85, parts of machines (not being parts of the articles of heading No 8484, 8544, 8545, 8546 or 8547) are to be classified according to the following rules : (a) Parts which are goods included in any of the headings of Chapters 84 or 85 (other than heading Nos 8485 and 8548) are in all cases to be classified within their respective headings. (b) Other parts, if suitable for use solely or principally with a particular kind of machine, or with a number of machines of the same heading (including a machine of heading No 8479 or 8543) are to be classified with the machines of that kind. However, parts which are equally suitable for use principally with the goods of heading Nos 8517 and 8525 to 8528 are to be classified within heading No 8517. (c) All other parts are to be classified within heading No 8485 or 8548.3. Unless the context otherwise requires, composite machines consisting of two or more machines fitted together to form a whole and other machines adapted for the purpose of performing two or more complementary or alternative functions are to be classified as if consisting only of that component or as being that machine which performs the principal function.4. Where a machine (including a combination of machines) consists of individual components (whether separate or interconnected by piping, by transmission devices, by electric cables or by other devices) intented to contribute together to a clearly defined function covered by one of the headings in Chapter 84 or 85, then the whole falls to be classified within the heading appropriate to that function.5. For the purposes of these notes, the expression 'machine' means any machine, machinery, plant, equipment, apparatus or appliance cited in the headings of Chapter 84 or 85.Additional notes1. Tools necessary for the assembly or maintenance of machines are to be classified with those machines if imported with them. Interchangeable tools imported with machines are also to be classified therewith if they form part of the normal equipment of the machines and are normally sold with them.2. Should the customs so require, the declarant shall produce, in support of his declaration, an illustrated document (for example, instructions, prospectus, a page from a catalogue, a photograph) giving the normal description of the machine, its uses and essential characteristics and, in respect of an unassembled or disassembled machine, an assembly plan and a list of the contents of the various packages.3. The provisions of general rule 2 (a) are also applicable, at the request of the declarant and subject to conditions stipulated by the competent authorities, to machines imported in split consignments.4. Tractors coupled, even by means of special devices, to machines and mechanical appliances of this section are in all cases to be classified separately (heading No 8701).CHAPTER 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOFNotes1. This chapter does not cover : (a) millstones, grindstones or other articles of Chapter 68; (b) appliances or machinery (for example, pumps) or parts thereof, of ceramic material (Chapter 69); (c) laboratory glassware (heading No 7017); machinery, appliances or other articles for technical uses or parts thereof, of glass (heading No 7019 or 7020); (d) articles of heading No 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81); (e) electro-mechanical tools for working in the hand, of heading No 8508 or electro-mechanical domestic appliances of heading No 8509; or (f) hand-operated mechanical floor sweepers, not motorized (heading No 9603).2. Subject to the operation of note 3 to Section XVI, a machine or appliance which answers to a description within one or more of the heading Nos 8401 to 8424 and at the same time to a description within one or other of the heading Nos 8425 to 8480 is to be classified under the appropriate heading of the former group and not the latter.Heading No 8419 does not, however, cover ; (a) germination plant, incubators or brooders (heading No 8436); (b) grain dampening machines (heading No 8437); (c) diffusing apparatus for sugar juice extraction (heading No 8438); (d) machinery for the heat-treatment of textile yarns, fabrics or made up textile articles (heading No 8451); or (e) machinery or plant, designed for mechanical operation, in which a change of temperature, even if necessary, is subsidiary. Heading No 8422 does not cover : (a) sewing machines for closing bags or similar containers (heading No 8452); or (b) office machinery of heading No 8472.3. A machine-tool for working any material which answers to a description within heading No 8456 and at the same time to a description in heading No 8457, 8458, 8459, 8460, 8461, 8464 or 8465 is to be classified within heading No 8456.4. Heading No 8457 applies only to machine-tools for working metal (other than lathes) which can carry out different types of machining operations either : (a) by automatic tool change from a magazine or the like in conformity with a machining programme (machining centres); (b) by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station); or (c) by the automatic transfer of the workpiece to different unit heads (multi-station transfer machines).5. (A) For the purposes of heading No 8471, the expression 'automatic data-processing machines' means : (a) digital machines, capable of (1) storing the processing program or programs and at least the data immediately necessary for the execution of the program; (2) being freely programmed in accordance with the requirements of the user; (3) performing arithmetical computations specified by the user; and (4) executing, without human intervention, a processing program which requires them to modify their execution, by logical decision during the processing run; (b) analogue machines capable of simulating mathematical models and comprising at least : analogue elements, control elements and programming elements; (c) hybrid machines consisting of either a digital machine with analogue elements or an analogue machine with digital elements. (B) Automatic data-processing machines may be in the form of systems consisting of a variable number of separately housed units. A unit is to be regarded as being a part of the complete system if it meets all the following conditions : (a) it is connectable to the central processing unit either directly or through one or more other units; (b) it is specifically designed as part of such a system (it must, in particular, unless it is a power supply unit, be able to accept or deliver data in a form (code or signals) which can be used by the system). Such units presented separately are also to be classified within heading No 8471. Heading No 8471 does not cover machines incorporating or working in conjunction with an automatic data-processing machine and performing a specific function. Such machines are classified in the headings appropriate to their respective functions or, failing that, in residual headings.6. Heading No 8482 applies inter alia to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1 % or by more than 0,05 mm, whichever is less.Other steel balls are to be classified within heading No 7326.7. A machine which is used for more than one purpose is, for the purposes of classification, to be treated as if its principal purpose were its sole purpose. Subject to note 2 to this chapter and note 3 to Section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in heading No 8479. Heading No 8479 also covers machines for making rope or cable (for example, stranding, twisting or cabling machines) from metal wire, textile yarn or any other material or from a combination of such materials.Subheading note1. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.Additional note1. For the purposes of subheadings 8407 10 and 8409 10, the expression 'aircraft engines' shall apply only to engines designed for fitting with an airscrew or rotor.

(0022)()(0543)()(0543)()(0001)()(0001)()(0001)()(0001)()(0599)()(0599)()(0599)()(0599)()(0599)()(0599)()(0599)()(0599)()(0599)()(0599)()(0001)()(0022)()(0022)()(0543)()(0543)()(0022)()(0543)()(0543)()(0022)()(0543)()(0543)()(0543)()(0543)()(0022)()( 0543)()(0543)()(0022)()(0543)()(0543)()(0543)()(0022)()(0022)()(0022)()(0543)()(0022)()(0022)()(0543)()(0543)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0543)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)( )(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022 )()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()

CHAPTER 85ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERSAND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS ANDACCESSORIES OF SUCH ARTICLESNotes1. This chapter does not cover : (a) electrically warmed blankets, bed pads, foot-muffs or the like; electrically warmed clothing, footwear or ear pads or other electrically warmed articles worn on or about the person; (b) articles of glass of heading No 7011; or (c) electrically heated furniture of Chapter 94.2. Heading Nos 8501 to 8504 do not apply to goods described in heading No 8511, 8512, 8540, 8541 or 8542. However, metal tank mercury arc rectifiers remain classified within heading No 8504.3. Heading No 8509 covers only the following electro-mechanical machines of the kind commonly used for domestic purposes : (a) vacuum cleaners, floor polishers, food grinders and mixers, and fruit or vegetable juice extractors, of any weight; (b) other machines provided the weight of such machines does not exceed 20 kg.The heading does not, however, apply to fans or ventilating or recycling hoods incorporating a fan, whether or not fitted with filters (heading No 8414), centrifugal clothes-dryers (heading No 8421), dish washing machines (heading No 8422), household washing machines (heading No 8450), roller or other ironing machines (heading No 8420 or 8451), sewing machines (heading No 8452), electric scissors (heading No 8508) or to electro-thermic appliances (heading No 8516).4. For the purposes of heading No 8534, 'printed circuits' are circuits obtained by forming on an insulating base, by any printing process (for example, embossing, plating-up, etching) or by the 'film circuit' technique, conductor elements, contacts or other printed components (for example, inductances, resistors, capacitors) alone or interconnected according to a pre-established pattern, other than elements which can produce, rectify, modulate or amplify an electrical signal (for example, semiconductor elements). The term 'printed circuits' does not cover circuits combined with elements other than those obtained during the printing process. Printed circuits may, however, be fitted with non-printed connecting elements. Thin or thick-film circuits comprising passive and active elements obtained during the same technological process are to be classified within heading No 8542.5. For the purposes of heading Nos 8541 and 8542 : (A) 'Diodes, transistors and similar semiconductor devices' are semiconductor devices the operation of which depends on variations in resistivity on the application of an electric field; (B) 'Electronic integrated circuits and microassemblies' are : (a) monolithic integrated circuits in which the circuit elements (diodes, transistors, resistors, capacitors, interconnections, etc.) are created in the mass (essentially) and on the surface of a semiconductor material (doped silicon, for example) and are inseparably associated; (b) hybrid integrated circuits in which passive elements (resistors, capacitors, interconnections, etc.), obtained by thin- or thick-film technology, and active elements (diodes, transistors, monolithic integrated circuits, etc.), obtained by semiconductor technology, are combined to all intents and purposes indivisibly, on a single insulating substrate (glass, ceramic, etc.). These circuits may also include discrete components; (c) microassemblies of the moulded module, micromodule or similar types, consisting of discrete, active or both active and passive, components which are combined and interconnected. For the classification of the articles defined in this note, heading Nos 8541 and 8542 shall take precedence over any other heading in the nomenclature which might cover them by reference to, in particular, their function.6. Records, tapes and other media of heading No 8523 or 8524 remain classified within those headings, whether or not they are presented with the apparatus for which they are intended.Additional notes1. Subheadings 8519 10, 8519 21, 8519 29, 8519 31 and 8519 39 are to be taken not to apply to sound reproducing apparatus with laser optical reading system, which fall within subheading 8519 99 10.2. Subheading 8524 10 is to be taken not to apply to 'compact discs', which fall within subheading 8524 90 10.3. Heading No 8521 is to be taken not to apply to video recording or reproducing apparatus incorporating a video tuner, which fall within subheading 8528 10 11, 8528 10 19 or 8528 10 30.

(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()( 0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()

< /CORPUS>

SECTION XVIIVEHICLES, AIRCRAFT, VESSELS AND ASSOCIATED TRANSPORT EQUIPMENT

Notes1. This section does not cover articles of heading No 9501, 9503 or 9508, or bobsleighs, toboggans or the like of heading No 9506.2. The expressions 'parts' and 'parts and accessories' do not apply to the following articles, whether or not they are identifiable as for the goods of this section : (a) joints, washers and the like of any material (classified according to their constituent material or in heading No 8484) or other articles of vulcanized rubber other than hard rubber (heading No 4016); (b) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (c) articles of Chapter 82 (tools); (d) articles of heading No 8306; (e) machines or apparatus of heading Nos 8401 to 8479, or parts thereof; articles of heading No 8481 or 8482 or, provided they constitute integral parts of engines or motors, articles of heading No 8483; (f) electrical machinery or equipment (Chapter 85); (g) articles of Chapter 90; (h) articles of Chapter 91; (ij) arms (Chapter 93); (k) lamps or lighting fittings of heading No 9405; (l) brushes of a kind used as parts of vehicles (heading No 9603).3. References in Chapters 86 to 88 to 'parts' or 'accessories' do not apply to parts or accessories which are not suitable for use solely or principally with the articles of those chapters. A part or accessory which answers to a description in two or more of the headings of those chapters is to be classified within that heading which corresponds to the principal use of that part or accessory.4. Aircraft specially constructed so that they can also be used as road vehicles are classified as aircraft. Amphibious motor vehicles are classified as motor vehicles.5. Air-cushion vehicles are to be classified within this section with the vehicles to which they are most akin as follows : (a) in Chapter 86 if designed to travel on a guide-track (hovertrains); (b) in Chapter 87 if designed to travel over land or over both land and water; (c) in Chapter 89 if designed to travel over water, whether or not able to land on beaches or landing-stages or also able to travel over ice. Parts and accessories of air-cushion vehicles are to be classified in the same way as those of vehicles of the heading in which the air-cushion vehicles are classified under the above provisions. Hovertrain track fixtures and fittings are to be classified as railway track fixtures and fittings, and signalling, safety or traffic control equipment for hovertrain transport systems as signalling, safety or traffic control equipment for railways.Additional notes1. Subject to the provisions of additional note 3 to Chapter 89, tools and articles necessary for the maintenance or repair of vehicles, aircraft or vessels are to be classified with those vehicles, aircraft or vessels if presented with them. Other accessories presented with vehicles, aircraft or vessels are also to be classified therewith if they form part of the normal equipment of the vehicles, aircraft or vessels and are normally sold with them.2. The provisions of general rule 2 (a) are also applicable, at the request of the declarant and subject to conditions stipulated by the competent authorities, to goods falling within heading Nos 8608, 8805, 8905 and 8907 imported in split consignments.CHAPTER 86RAILWAY OR TRAMWAY LOCOMOTIVES, ROLLING-STOCK AND PARTS THEREOF; RAILWAY OR TRAMWAY TRACK FIXTURES AND FITTINGS AND PARTS THEREOF; MECHANICAL (INCLUDING ELECTRO-MECHANICAL) TRAFFIC SIGNALLING EQUIPMENT OF ALL KINDSNotes1. This chapter does not cover : (a) railway or tramway sleepers of wood or of concrete, or concrete guide-track sections for hovertrains (heading No 4406 or 6810); (b) railway or tramway track construction material of iron or steel of heading No 7302; or (c) electrical signalling, safety or traffic control equipment of heading No 8530.2. Heading No 8607 applies inter alia to : (a) axles, wheels, wheel sets (running gear), metal tyres, hoops and hubs and other parts of wheels; (b) frames, underframes, bogies and bissel-bogies; (c) axle boxes; brake gear; (d) buffers for rolling-stock; hooks and other coupling gear and corridor connections; (e) coachwork.3. Subject to the provisions of note 1 above, heading No 8608 applies inter alia to : (a) assembled track, turntables, platform buffers, loading gauges; (b) semaphores, mechanical signal discs, level-crossing control gear, signal and point controls, and other mechanical (including electro-mechanical) signalling, safety or traffic control equipment, whether or not fitted for electric lighting, for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields.

CHAPTER 87VEHICLES OTHER THAN RAILWAY OR TRAMWAY ROLLING-STOCK,AND PARTS AND ACCESSORIES THEREOFNotes1. This chapter does not cover railway or tramway rolling-stock designed solely for running on rails.2. For the purposes of this chapter, 'tractors' means vehicles constructed essentially for hauling or pushing another vehicle, appliance or load, whether or not they contain subsidiary provision for the transport, in connection with the main use of the tractor, of tools, seeds, fertilizers or other goods.3. Motor chassis fitted with cabs fall within heading Nos 8702 to 8704, and not within heading No 8706.4. Heading No 8712 includes all children's bicycles. Other children's cycles fall within heading No 9501.

(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()(0001)()

CHAPTER 88AIRCRAFT, SPACECRAFT, AND PARTS THEREOFAdditional note1. For the purposes of heading No 8802, the expression 'unladen weight' shall mean the weight of the machine in normal flying order, excluding the weight of the crew and of fuel and equipment except permanently fitted items of equipment.

(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0543)()(0543)()(0022)()(0543)()(0543)()(0022)()(0543)()(0543)()(0022)()(0543)()(0543)()(0022)()

CHAPTER 89SHIPS, BOATS AND FLOATING STRUCTURESNote1. A hull, an unfinished or incomplete vessel, assembled, unassembled or disassembled, or a complete vessel unassembled or disassembled, is to be classified within heading No 8906 if it does not have the essential character of a vessel of a particular kind.Additional notes1. Subheadings 8901 10 10, 8901 20 10, 8901 30 10, 8901 90 10, 8902 00 11, 8902 00 19, 8903 91 10, 8903 92 10, 8904 00 91 and 8906 00 91 are to be taken to apply only to vessels, designed as sea-going, having a hull of an overall length (excluding any projecting parts) of not less than 12 m. However, fishing boats and lifeboats, designed as sea-going, shall be considered as sea-going vessels regardless of their length.2. Subheadings 8905 10 10 and 8905 90 10 are to be taken to apply only to vessels, floating docks and floating or submersible drilling or production platforms, designed as sea-going.3. For the purpose of heading No 8908, the expression 'vessels and other floating structures for breaking up' includes the following articles when presented for breaking up, on condition that they have formed part of their normal equipment : - spare parts (such as propellers), whether or not in a new condition, - movable articles (furniture, kitchen equipment, tableware, etc.) showing clear evidence of use.

(0001)()

SECTION XVIIIOPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; CLOCKS AND WATCHES; MUSICAL INSTRUMENTS; PARTS AND ACCESSORIES THEREOF

CHAPTER 90OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOFNotes1. This chapter does not cover : (a) articles of a kind used in machines, appliances or for other technical uses, of vulcanized rubber other than hard rubber (heading No 4016), of leather or of composition leather (heading No 4204) or of textile material (heading No 5911); (b) refractory goods of heading No 6903; ceramic wares for laboratory, chemical or other technical uses, of heading No 6909; (c) glass mirrors, not optically worked, of heading No 7009, or mirrors of base metal or of precious metal, not being optical elements (heading No 8306 or Chapter 71); (d) goods of heading No 7007, 7008, 7011, 7014, 7015 or 7017; (e) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV) or similar goods of plastics (Chapter 39); (f) pumps incorporating measuring devices, of heading No 8413; weight-operated counting and checking machinery, or separately presented weights for balances (heading No 8423); lifting or handling machinery (heading Nos 8425 to 8428); paper or paperboard cutting machines of all kinds (heading No 8441); fittings for adjusting work or tools on machine-tools, of heading No 8466, including fittings with optical devices for reading the scale (for example, 'optical' dividing heads) but not those which are in themselves essentially optical instruments (for example, alignment telescopes); calculating machines (heading No 8470); valves and other appliances (heading No 8481); (g) searchlights or spotlights of a kind used for cycles or motor vehicles (heading No 8512); portable electric lamps of heading No 8513; cinematographic sound recording, reproducing or re-recording apparatus (heading No 8519 or 8520); sound-heads (heading No 8522); radar apparatus, radio navigational aid apparatus or radio remote-control apparatus (heading No 8526); sealed beam lamp units of heading No 8539; optical fibre cables of heading No 8544; (h) searchlights or spotlights of heading No 9405; (ij) articles of Chapter 95; (k) capacity measures, which are to be classified according to their constituent material; or (l) spools, reels or similar supports (which are to be classified according to their constituent material, for example, in heading No 3923 or Section XV).2. Subject to note 1 above, parts and accessories for machines, apparatus, instruments or articles of this chapter are to be classified according to the following rules : (a) Parts and accessories which are goods included within any of the headings of this chapter or of Chapter 84, 85 or 91 (other than heading No 8485, 8548 or 9033) are in all cases to be classified within their respective headings. (b) Other parts and accessories, if suitable for use solely or principally with a particular kind of machine, instrument or apparatus, or with a number of machines, instruments or apparatus of the same heading (including a machine, instrument or apparatus of heading No 9010, 9013 or 9031) are to be classified with the machines, instruments or apparatus of that kind. (c) All other parts and accessories are to be classified within heading No 9033.3. The provisions of note 4 to Section XVI apply also to this chapter.4. Heading No 9005 does not apply to telescopic sights for fitting to arms, periscopic telescopes for fitting to submarines or tanks, or to telescopes for machines, appliances, instruments or apparatus of this chapter or Section XVI; such telescopic sights and telescopes are to be classified within heading No 9013.5. Measuring or checking optical instruments, appliances or machines which, but for this note, could be classified both within heading No 9013 and within heading No 9031 are to be classified within heading No 9031.6. Heading No 9032 applies only to : (a) instruments and apparatus for automatically controlling the flow, level, pressure or other variables of liquids or gases, or for automatically controlling temperature, whether or not their operation depends on an electrical phenomenon which varies according to the factor to be automatically controlled; and (b) automatic regulators of electrical quantities, and instruments or apparatus for automatically controlling non-electrical quantities the operation of which depends on an electrical phenomenon varying according to the factor to be controlled.Additional note1. For the purposes of subheadings 9015 10 10, 9015 20 10, 9015 30 10, 9015 40 10, 9015 80 11, 9015 80 19, 9024 10 10, 9024 80 10, 9025 19 91, 9025 80 91, 9026 10 51, 9026 10 59, 9026 20 30, 9026 80 91, 9027 10 10, 9027 80 11, 9027 80 19, 9030 39 30, 9030 89 91, 9031 80 31, 9031 80 39 and 9032 10 30, the expression 'electronic' means instruments and apparatus which incorporate one or more articles of heading No 8540, 8541 or 8542 but for the purposes of the foregoing, no account shall be taken of articles of heading No 8540, 8541 or 8542 which have solely the function of rectifying current or which are included in the power pack of instruments or apparatus.

(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()( 0022)()(0022)()

CHAPTER 91CLOCKS AND WATCHES AND PARTS THEREOFNotes1. This chapter does not cover : (a) clock or watch glasses or weights (classified according to their constituent material); (b) watch chains (heading No 7113 or 7117, as the case may be); (c) parts of general use defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39) or of precious metal or metal clad with precious metal (generally heading No 7115); clock or watch springs are, however, to be classified as clock or watch parts (heading No 9114); (d) bearing balls (heading No 7326 or 8482, as the case may be); (e) articles of heading No 8412 constructed to work without an escapement; (f) ball bearings (heading No 8482); or (g) articles of Chapter 85, not yet assembled together or with other components into watch or clock movements or into articles suitable for use solely or principally as parts of such movements (Chapter 85).2. Heading No 9101 covers only watches with case wholly of precious metal or of metal clad with precious metal, or of the same materials combined with natural or cultured pearls, or precious or semi-precious stones (natural, synthetic or reconstructed) of heading Nos 7101 to 7104. Watches with case of base metal inlaid with precious metal fall within heading No 9102.3. For the purposes of this chapter, the expression 'watch movements' means devices regulated by a balance-wheel and hairspring, quartz crystal or any other system capable of determining intervals of time, with a display or a system to which a mechanical display can be incorporated. Such watch movements shall not exceed 12 mm in thickness and 50 mm in width, length or diameter.4. Except as provided in note 1, movements and other parts suitable for use both in clocks or watches and in other articles (for example, precision instruments) are to be classified within this chapter.

(0022)()(0022)()(0022)()

CHAPTER 92MUSICAL INSTRUMENTS; PARTS AND ACCESSORIES OF SUCH ARTICLESNotes1. This chapter does not cover : (a) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (b) microphones, amplifiers, loudspeakers, headphones, switches, stroboscopes and other accessory instruments, apparatus or equipment of Chapter 85 or 90, for use with but not incorporated in or housed in the same cabinet as instruments of this chapter; (c) toy instruments and apparatus (heading No 9503); (d) brushes for cleaning musical instruments (heading No 9603); (e) collectors' pieces or antiques (heading No 9705 or 9706); or (f) spools, reels or similar supports (which are to be classified according to their constituent material : for example, heading No 3924, Section XV).2. Bows and sticks and similar devices used in playing the musical instruments of heading Nos 9202 or 9206 presented with such instruments in numbers normal thereto and clearly intended for use therewith, are to be classified within the same heading as the relative instruments. Cards, discs and rolls of heading No 9209 presented with an instrument are to be treated as separate articles and not as forming a part of such instrument.

SECTION XIXARMS AND AMMUNITION; PARTS AND ACCESSORIES THEREOF

CHAPTER 93ARMS AND AMMUNITION; PARTS AND ACCESSORIES THEREOFNotes1. This chapter does not cover : (a) goods of Chapter 36 (for example, percussion caps, detonators, signalling flares); (b) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (c) armoured fighting vehicles (heading No 8710); (d) telescopic sights or other optical devices suitable for use with arms, unless mounted on a firearm or presented with the firearm on which they are designed to be mounted (Chapter 90); (e) bows, arrows, fencing foils or toys (Chapter 95); or (f) collectors' pieces or antiques (heading No 9705 or 9706).2. In heading No 9306, the reference to 'parts thereof' does not include radio or radar apparatus of heading No 8526.

SECTION XXMISCELLANEOUS MANUFACTURED ARTICLES

CHAPTER 94FURNITURE; BEDDING, MATTRESSES, MATTRESS SUPPORTS, CUSHIONS AND SIMILAR STUFFED FURNISHINGS; LAMPS AND LIGHTING FITTINGS, NOT ELSEWHERE SPECIFIED OR INCLUDED; ILLUMINATED SIGNS, ILLUMINATED NAME-PLATES AND THE LIKE; PREFABRICATED BUILDINGSNotes1. This chapter does not cover : (a) pneumatic or water mattresses, pillows or cushions, of Chapter 39, 40 or 63; (b) mirrors designed for placing on the floor or ground (for example, cheval-glasses (swing-mirrors)) of heading No 7009; (c) articles of Chapter 71; (d) parts of general use as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39), or safes of heading No 8303; (e) furniture specially designed as parts of refrigerating or freezing equipment of heading No 8418; furniture specially designed for sewing machines (heading No 8452); (f) lamps or lighting fittings of Chapter 85; (g) furniture specially designed as parts of apparatus of heading No 8518 (heading No 8518), of heading Nos 8519 to 8521 (heading No 8522) or of heading Nos 8525 to 8528 (heading No 8529); (h) articles of heading No 8714; (ij) dentists' chairs incorporating dental appliances of heading No 9018 or dentists' spittoons (heading No 9018); (k) articles of Chapter 91 (for example, clocks and clock cases); or (l) toy furniture or toy lamps or lighting fittings (heading No 9503), billiard tables or other furniture specially constructed for games (heading No 9504), furniture for conjuring tricks or decorations (other than electric garlands) such as Chinese lanterns (heading No 9505).2. The articles (other than parts) referred to in heading Nos 9401 to 9403 are to be classified in those headings only if they are designed for placing on the floor or ground. The following are, however, to be classified in the abovementioned headings even if they are designed to be hung, to be fixed to the wall or to stand one on the other : (a) cupboards, bookcases, other shelved furniture and unit furniture; (b) seats and beds.3. (a) In heading Nos 9401 to 9403 references to parts of goods do not include references to sheets or slabs (whether or not cut to shape but not combined with other parts) of glass (including mirrors), marble or other stone or of any other material referred to in Chapter 68 or 69. (b) Goods described within heading No 9404, presented separately, are not to be classified within heading No 9401, 9402 or 9403 as parts of goods.4. For the purposes of heading No 9406, the expression 'prefabricated buildings' means buildings which are finished in the factory or put up as elements, presented together, to be assembled on site, such as housing or worksite accommodation, offices, schools, shops, sheds, garages or similar buildings.

(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()(0022)()

CHAPTER 95TOYS, GAMES AND SPORTS REQUISITES; PARTS AND ACCESSORIES THEREOFNotes1. This chapter does not cover : (a) Christmas tree candles (heading No 3406); (b) fireworks or other pyrotechnic articles of heading No 3604; (c) yarns, monofilament, cords or gut or the like for fishing, cut to length but not made up into fishing lines, of Chapter 39, heading No 4206 or Section XI; (d) sports bags or other containers of heading No 4202, 4303 or 4304; (e) sports clothing or fancy dress, of textiles, of Chapter 61 or 62; (f) textile flags or bunting, or sails for boats, sailboards or land craft, of Chapter 63; (g) sports footwear (other than skating boots with ice or roller skates attached) of Chapter 64, or sports headgear of Chapter 65; (h) walking-sticks, whips, riding-crops or the like (heading No 6602), or parts thereof (heading No 6603); (ij) unmounted glass eyes for dolls or other toys, of heading No 7018; (k) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (l) bells, gongs or the like of heading No 8306; (m) electric motors (heading No 8501), electric transformers (heading No 8504) or radio remote control apparatus (heading No 8526); (n) sports vehicles (other than bobsleighs, toboggans and the like) of Section XVII; (o) children's bicycles (heading No 8712); (p) sports craft such as canoes and skiffs (Chapter 89), or their means of propulsion (Chapter 44 for such articles made of wood); (q) spectacles, goggles or the like, for sports or outdoor games (heading No 9004); (r) decoy calls or whistles (heading No 9208); (s) arms or other articles of Chapter 93; (t) electric garlands of all kinds (heading No 9405); or (u) racket strings, tents or other camping goods, or gloves (classified according to their constituent material).2. This chapter includes articles in which natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed), precious metal or metal clad with precious metal constitute only minor constituents.3. Subject to note 1 above, parts and accessories which are suitable for use solely or principally with articles of this chapter are to be classified with those articles.

(0600)()

CHAPTER 96MISCELLANEOUS MANUFACTURED ARTICLESNotes1. This chapter does not cover : (a) pencils for cosmetic or toilet uses (Chapter 33); (b) articles of Chapter 66 (for example, parts of umbrellas or walking-sticks); (c) imitation jewellery (heading No 7117); (d) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (e) cutlery or other articles of Chapter 82 with handles or other parts of carving or moulding materials; heading No 9601 or 9602 applies, however, to separately presented handles or other parts of such articles; (f) articles of Chapter 90 (for example, spectacle frames (heading No 9003), mathematical drawing pens (heading No 9017), brushes of a kind specialized for use in dentistry or for medical, surgical or veterinary purposes (heading No 9018)); (g) articles of Chapter 91 (for example, clock or watch cases); (h) musical instruments or parts or accessories thereof (Chapter 92); (ij) articles of Chapter 93 (arms and parts thereof); (k) articles of Chapter 94 (for example, furniture, lamps and lighting fittings); (l) articles of Chapter 95 (toys, games, sports requisites); or (m) works of art, collectors' pieces or antiques (Chapter 97).2. In heading No 9602, the expression 'vegetable or mineral carving material' means : (a) hard seeds, pips, hulls and nuts and similar vegetable materials of a kind used for carving (for example, corozo and dom); (b) amber, meerschaum, agglomerated amber and agglomerated meerschaum, jet and mineral substitutes for jet.3. In heading No 9603, the expression 'prepared knots and tufts for broom or brush making' applies only to unmounted knots and tufts of animal hair, vegetable fibre or other material, which are ready for incorporation without division in brooms or brushes, or which require only such further minor processes as trimming to shape at the top, to render them ready for such incorporation.4. Articles of this chapter, other than those of heading Nos 9601 to 9606 or 9615, remain classified within the chapter whether or not composed wholly or partly of precious metal or metal clad with precious metal, of natural or cultured pearls, or precious or semi-precious stones (natural, synthetic or reconstructed). However, heading Nos 9601 to 9606 and 9615 include articles in which natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed), precious metal or metal clad with precious metal constitute only minor constituents.

SECTION XXIWORKS OF ART, COLLECTORS' PIECES AND ANTIQUES

CHAPTER 97WORKS OF ART, COLLECTORS' PIECES AND ANTIQUESNotes1. This chapter does not cover : (a) unused postage or revenue stamps, postal stationery (stamped paper) and the like, of current or new issue in the country to which they are destined (Chapter 49); (b) theatrical scenery, studio backcloths or the like, of painted canvas (heading No 5907) except if they may be classified within heading No 9706; or (c) pearls, natural or cultured, or precious or semi-precious stones (heading Nos 7101 to 7103).2. For the purposes of heading No 9702, the expression 'original engravings, prints and lithographs' means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by him, but not including any mechanical or photomechanical process.3. Heading No 9703 does not apply to mass-produced reproductions or works of conventional craftsmanship of a commercial character.4. (a) Subject to notes 1 to 3 above, articles of this chapter are to be classified in this chapter and not in any other chapter of the nomenclature. (b) Heading No 9706 does not apply to articles of the preceding headings of this chapter.5. Frames around paintings, drawings, pastels, collages or similar decorative plaques, engravings, prints or lighographs are to be treated as forming part of those articles, provided they are of a kind and of a value normal to those articles.

CHAPTER 98 COMPLETE INDUSTRIAL PLANT EXPORTED IN ACCORDANCE WITH COMMISSION REGULATION (EEC) No 518/79 Note

Commission Regulation (EEC) No 518/79 of 19 March 1979 (01)() set up a simplified declaration procedure for recording exports of complete industrial plant in the external trade statistics of the Community and in the statistics of trade between Member States. To make use of this procedure, the parties responsible for supplying statistical information must have obtained the necessary prior authorization from the competent department, as listed in the following table.

Member State Name and address of the competent department

Belgium Institut national de statistique Rue de Louvain 44 B - 1000 Bruxelles Nationaal Instituut voor de Statistiek Leuvenseweg 44 B - 1000 Brussel

Denmark Skatteministeriet Told- og Skattestyrelsen Amaliegade 44 DK - 1256 Koebenhavn K

Germany (FR) Statistisches Bundesamt Gruppe VI C Aussenhandel Gustav-Stresemann-Ring 11 Postfach 5528 D - 6200 Wiesbaden 1

Ellada Ethniki Statistiki Ypiresia tis Ellados (ESYE) Odos Lykoyrgoy 14-16 GR - Athina

Spain Dirección general de aduanas e impuestos especiales Subdirección general de planificación informática aduanera C/Guzmán el Bueno, 137 E - 28071 Madrid

France Direction générale des douanes et droits indirects Division de la statistique et de l'informatique Bureau C 1 8, rue de la Tour-des-Dames F - 75436 Paris Cedex 09

Italy Ministero delle finanze Direzione generale delle dogane e delle imposte indirette I - 00100 Roma-EUR

Ireland Central Statistics Office Earlsfort Terrace IRL - Dublin 2 Office of the Revenue Commissioners Dublin Castle IRL - Dublin 2

Luxembourg Institut national de statistique Rue de Louvain 44 B - 1000 Bruxelles

Netherlands Inspecteur des Invoerrechten en Accijnzen, in wiens ambtsgebied belanghebbende woont of is gevestigd

Portugal Direcçao-Geral das Alfândegas Direcçao de Serviços de Nomenclatura Política Pautal Origens e Relações Externas Rua da Alfândega, 2 P - 1194 Lisboa CODEX

United Kingdom The Controller HM Customs and Excise Statistical Office Portcullis House 27 Victoria Avenue UK - Southend-on-Sea SS2 6AL

CN codes Description

Component parts of complete industrial plant :

9880 63 00 to 9889 63 10 Classified in Chapter 63

9880 68 00 to 9889 68 15 Classified in Chapter 68

9880 69 00 to 9889 69 14 Classified in Chapter 69

9880 70 00 to 9889 70 20 Classified in Chapter 70

9880 72 00 to 9889 72 29 Classified in Chapter 72 (excluding goods listed in Annex I to the Treaty establishing the European Coal and Steel Community (ECSC))

9880 73 00 to 9889 73 26 Classified in Chapter 73 (excluding goods listed in Annex I to the Treaty establishing the European Coal and Steel Community (ECSC))

9880 76 00 to 9889 76 16 Classified in Chapter 76

9880 82 00 to 9889 82 15 Classified in Chapter 82

9880 84 00 to 9889 84 85 Classified in Chapter 84

9880 85 00 to 9889 85 48 Classified in Chapter 85

9880 86 00 to 9889 86 09 Classified in Chapter 86

9880 87 00 to 9889 87 16 Classified in Chapter 87

9880 90 00 to 9889 90 33 Classified in Chapter 90

9880 94 00 to 9889 94 06 Classified in Chapter 94

9880 99 00 to 9889 99 00 Not included in the chapters within which they fall

ANNEX

HEADINGS OR SUBHEADINGS OF WHICH ONLY PART IS COVERED BY A GATT CONCESSION OR IN WHICH DIFFERENT CONCESSIONS HAVE BEEN GRANTED

CN code Description of goods Rate of duty conventional %