Legalize
Legalize / European Union / Regulation

Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics (Text with EEA relevance)

Type Regulation
Publication 2008-11-14
Last updated 2024-02-07
State In force
Department Council of the European Union, European Parliament
Source EUR-Lex
articles 12
Reform history JSON API

Heat energy at a useful temperature level, extracted (captured) by means of heat pumps that need electricity or other auxiliary energy to function. This heat energy can be stored in the ambient air, beneath the surface of solid earth or in surface water. Values should be reported using the same methodology as the one used for reporting heat energy captured by heat pumps under Directive 2009/28/EC and Directive (EU) 2018/2001, but all heat pumps must be included regardless of their performance level.

3.6.   Hydrogen

Hydrogen used as a feedstock, a fuel or an energy carrier/storage must be reported. Hydrogen shall be reported, also when auto produced and auto consumed. Hydrogen present in mixtures is not to be reported unless extracted (separated) for energy or non-energy use.

ANNEX B

ANNUAL ENERGY STATISTICS

This annex describes the scope, units, reported period, frequency, deadline and transmission arrangements for the annual collection of energy statistics.

Unless otherwise specified, the following provisions apply to all data collections specified in this annex:

  • (a) Reported period: The reported period of declared data will be a calendar year (1 January to 31 December), starting at reference year 2022.
  • (b) Frequency: Data should be declared on an annual basis.
  • (c) Deadline for transmission of data: Data should be submitted by 31 October of the year following the reported year, unless otherwise specified.
  • (d) Transmission format: The transmission format should conform to the relevant interchange standard specified by Eurostat.
  • (e) Transmission method: Data should be submitted or uploaded by electronic means to Eurostat’s single entry point for data.

Annex A provides explanations of terms not explained in this annex.

1. SOLID FOSSIL FUELS AND MANUFACTURED GASES

1.1.   Applicable energy products

Unless otherwise specified, this data collection applies to all energy products listed in Annex A, Chapter 3.1. COAL (solid fossil fuels and manufactured gases).

1.2.   List of aggregates

The following list of aggregates must be declared for all energy products listed in the previous paragraph unless otherwise specified.

  • 1.2.1.SUPPLY
  • 1.2.1.1.Production
  • 1.2.1.1.1.Underground production
  • Applicable only for anthracite, coking coal, other bituminous coal, sub-bituminous coal and lignite.
  • 1.2.1.1.2.Surface production
  • Applicable only for anthracite, coking coal, other bituminous coal, sub-bituminous coal and lignite.
  • 1.2.1.2.Receipts from other sources
  • This consists of two components:
  • — recovered slurries, middlings and other low-grade coal products, which cannot be classified according to type of coal, including coal recovered from waste piles and other waste receptacles,
  • — receipts from other sources.
  • 1.2.1.3.Receipts from other sources: from oil products
  • Not applicable for anthracite, coking coal, other bituminous coal, sub-bituminous coal, lignite, peat, and oil shale and oil sands.
  • 1.2.1.4.Receipts from other sources: from natural gas
  • Not applicable for anthracite, coking coal, other bituminous coal, sub-bituminous coal, lignite, peat, and oil shale and oil sands.
  • 1.2.1.5.Receipts from other sources: from renewables
  • Not applicable for anthracite, coking coal, other bituminous coal, sub-bituminous coal, lignite, peat, oil shale and oil sands.
  • 1.2.1.6.Imports
  • 1.2.1.7.Exports
  • 1.2.1.8.International Marine Bunkers
  • 1.2.1.9.Stock changes
  • 1.2.2.TRANSFORMATION SECTOR
  • 1.2.2.1.Main activity producer electricity only
  • 1.2.2.2.Main activity producer combined heat and power (CHP) units
  • 1.2.2.3.Main activity producer heat only
  • 1.2.2.4.Autoproducer electricity only
  • 1.2.2.5.Autoproducer combined heat and power (CHP) units
  • 1.2.2.6.Autoproducer heat only
  • 1.2.2.7.Patent fuel plants
  • 1.2.2.8.Coke ovens
  • 1.2.2.9.BKB/PB plants
  • 1.2.2.10.Gas works
  • 1.2.2.11.Blast furnaces
  • 1.2.2.12.Coal liquefaction
  • 1.2.2.13.For blended natural gas
  • 1.2.2.14.Production of hydrogen
  • 1.2.2.15.Not elsewhere specified – Transformation
  • 1.2.3.ENERGY SECTOR
  • 1.2.3.1.Electricity, CHP and heat plants
  • 1.2.3.2.Coal mines
  • 1.2.3.3.Patent fuel plants
  • 1.2.3.4.Coke ovens
  • 1.2.3.5.BKB/PB plants
  • 1.2.3.6.Gas works
  • 1.2.3.7.Blast furnaces
  • 1.2.3.8.Petroleum refineries
  • 1.2.3.9.Coal liquefaction
  • 1.2.3.10.Hydrogen production, liquefaction and gasification
  • 1.2.3.11.Not elsewhere specified – Energy
  • 1.2.4.TRANSMISSION AND DISTRIBUTION LOSSES
  • 1.2.5.NON-ENERGY USE
  • 1.2.5.1.Industry, transformation and energy sectors
  • Non-energy use in all industry, transformation and energy sub-sectors.
  • 1.2.5.1.1.Chemical and petrochemical sector
  • NACE Divisions 20 and 21; non-energy use of coal includes use as feedstocks to produce fertiliser and as feedstocks for other petrochemical products.
  • 1.2.5.2.Transport sector
  • Non-energy use in all transport sub-sectors.
  • 1.2.5.3.Other sectors
  • Non-energy use in Commercial and public services, households, agriculture and Not elsewhere specified – Other.
  • 1.2.6.FINAL ENERGY CONSUMPTION — INDUSTRY SECTOR
  • 1.2.6.1.Iron and steel
  • 1.2.6.2.Chemical and petrochemical
  • 1.2.6.3.Non-ferrous metals
  • 1.2.6.4.Non-metallic minerals
  • 1.2.6.5.Transport equipment
  • 1.2.6.6.Machinery
  • 1.2.6.7.Mining and quarrying
  • 1.2.6.8.Food, beverages and tobacco
  • 1.2.6.9.Pulp, paper and printing
  • 1.2.6.10.Wood and wood products
  • 1.2.6.11.Construction
  • 1.2.6.12.Textile and leather
  • 1.2.6.13.Not elsewhere specified – Industry
  • 1.2.7.FINAL ENERGY CONSUMPTION — TRANSPORT SECTOR
  • 1.2.7.1.Rail
  • 1.2.7.2.Domestic Navigation
  • 1.2.7.3.Not Elsewhere Specified — Transport
  • 1.2.8.FINAL ENERGY CONSUMPTION — OTHER SECTORS
  • 1.2.8.1.Commercial and public services
  • 1.2.8.2.Households
  • 1.2.8.3.Agriculture
  • 1.2.8.4.Forestry
  • 1.2.8.5.Fishing
  • 1.2.8.6.Not elsewhere specified – Other
  • 1.2.9.IMPORTS BY COUNTRY OF ORIGIN AND EXPORTS BY COUNTRY OF DESTINATION
  • Imports by country of origin and exports by country of destination should be reported. Applicable to anthracite, coking coal, other bituminous coal, sub-bituminous coal, lignite, patent fuel, coke oven coke, coal tar, BKB, peat, peat products and oil shale and oil sands.
  • 1.2.10.CALORIFIC VALUES
  • Applicable for anthracite, coking coal, other bituminous coal, sub-bituminous coal, lignite, patent fuel, coke oven coke, gas coke, coal tar, BKB, peat, peat products, oil shale and oil sands.
  • Both gross and net calorific values are to be declared for the following aggregates:
  • 1.2.10.1. Production
  • 1.2.10.2. Imports
  • 1.2.10.3. Exports
  • 1.2.10.4. Used in coke ovens
  • 1.2.10.5. Used in blast furnaces
  • 1.2.10.6. Used in main activity producer electricity only, heat only and CHP units
  • 1.2.10.7. Used in industry
  • 1.2.10.8. For other uses

1.3.   Units of measurement

Reported quantities must be declared in kt (kilo-tonnes), except for manufactured gases (gas works gas, coke oven gas, blast furnace gas, other recovered gases), where the reported quantity must be declared in TJ GCV (tera-joules based on gross calorific values).

Calorific values must be declared in MJ/t (mega-joules per tonne).

1.4.   Derogations and exemptions

Not applicable.

2. NATURAL GAS

2.1.   Applicable energy products

This chapter covers the reporting of natural gas.

2.2.   List of aggregates

The following list of aggregates must be declared for natural gas.

  • 2.2.1.SUPPLY
  • Declared quantities for the supply sector must be expressed in both volume and energy units, and must include the gross and net calorific values.
  • 2.2.1.1.Indigenous production
  • Includes offshore production.
  • 2.2.1.1.1.Associated gas
  • Natural gas produced in association with crude oil.
  • 2.2.1.1.2.Non-associated gas
  • Natural gas originating from fields producing hydrocarbons only in gaseous form.
  • 2.2.1.1.3.Colliery gas
  • Methane produced at coal mines or from coal seams, piped to the surface and consumed at collieries or transmitted by pipeline to consumers.
  • 2.2.1.2.Receipts from other sources
  • 2.2.1.2.1.Receipts from other sources: Oil and petroleum products
  • 2.2.1.2.2.Receipts from other sources: Coal
  • 2.2.1.2.3.Receipts from other sources: Renewables
  • 2.2.1.2.4.Receipts from other sources: Hydrogen
  • 2.2.1.3.Imports
  • 2.2.1.4.Exports
  • 2.2.1.5.International marine bunkers
  • 2.2.1.6.Stock changes
  • Opening and closing stock levels should be declared separately, as stocks on national territory and stocks held abroad, respectively. ‘Stock level’ means the quantity of gas available for delivery during any input-output cycle.
  • 2.2.1.7.Inland consumption (Observed)
  • 2.2.1.8.Recoverable gas
  • This refers to recoverable natural gas stored in special storage facilities (depleted gas and/or oil field, aquifer, salt cavity, mixed caverns, or other), as well as stored liquefied natural gas. Cushion gas should be excluded. The requirement of declaring calorific values is not applicable here.
  • 2.2.1.9.Gas vented
  • The volume of gas released into the air on the production site or at the gas processing plant. The requirement of declaring calorific values is not applicable here.
  • 2.2.1.10.Gas Flared
  • The volume of gas burned in flares on the production site or at the gas processing plant. The requirement of declaring calorific values is not applicable here.
  • 2.2.2.TRANSFORMATION SECTOR
  • 2.2.2.1.Main activity producer Electricity Only
  • 2.2.2.2.Autoproducer electricity only
  • 2.2.2.3.Main activity producer CHP units
  • 2.2.2.4.Autoproducer CHP units
  • 2.2.2.5.Main activity producer heat only
  • 2.2.2.6.Autoproducer heat only
  • 2.2.2.7.Gas works
  • 2.2.2.8.Coke ovens
  • 2.2.2.9.Blast furnaces
  • 2.2.2.10.Gas to liquids
  • 2.2.2.11Production of hydrogen
  • 2.2.2.12.Non specified – Transformation
  • 2.2.3.ENERGY SECTOR
  • 2.2.3.1.Coal mines
  • 2.2.3.2.Oil and gas extraction
  • 2.2.3.3.Petroleum refineries
  • 2.2.3.4.Coke ovens
  • 2.2.3.5.Blast furnaces
  • 2.2.3.6.Gas works
  • 2.2.3.7.Electricity, CHP and heat plants
  • 2.2.3.8.Liquefaction (LNG) or gasification (GNG)
  • 2.2.3.9.Gas to liquids
  • 2.2.3.10.Hydrogen production, liquefaction and gasification
  • 2.2.3.11.Not elsewhere specified – Energy
  • 2.2.4.TRANSMISSION LOSSES
  • 2.2.5.DISTRIBUTION LOSSES
  • 2.2.6.TRANSPORT SECTOR
  • Final energy consumption and final non-energy consumption should be declared separately for the following aggregates.
  • 2.2.6.1.Road
  • 2.2.6.2.Pipeline transport
  • 2.2.6.3.Domestic navigation
  • 2.2.6.4.Not elsewhere specified – transport
  • 2.2.7.INDUSTRY SECTOR
  • Final energy consumption and final non-energy consumption should be declared separately for the following aggregates.
  • 2.2.7.1.Iron and steel
  • 2.2.7.2.Chemical and petrochemical
  • 2.2.7.3.Non-ferrous metals
  • 2.2.7.4.Non-metallic minerals
  • 2.2.7.5.Transport equipment
  • 2.2.7.6.Machinery
  • 2.2.7.7.Mining and quarrying
  • 2.2.7.8.Food, beverages and tobacco
  • 2.2.7.9.Pulp, paper and printing
  • 2.2.7.10.Wood and wood products
  • 2.2.7.11.Construction
  • 2.2.7.12.Textile and leather
  • 2.2.7.13.Not elsewhere specified – industry
  • 2.2.8.OTHER SECTORS
  • Final energy consumption and final non-energy consumption should be declared separately for the following aggregates.
  • 2.2.8.1.Commercial and public services
  • 2.2.8.2.Households
  • 2.2.8.3.Agriculture
  • 2.2.8.4.Forestry
  • 2.2.8.5.Fishing
  • 2.2.8.6.Not elsewhere specified – Other
  • 2.2.9.IMPORTS BY COUNTRY OF ORIGIN AND EXPORTS BY COUNTRY OF DESTINATION
  • Both the quantities of total natural gas and of the LNG part of it should be declared, per country of origin for imports and per country of destination for exports.
  • 2.2.10.GAS STORAGE CAPACITIES
  • To be reported separately as gaseous gas storage facilities and LNG terminals (to be further distinguished as LNG import terminals or LNG export terminals).
  • 2.2.10.1.Name
  • Name of the site of the storage facility or the LNG terminal.
  • 2.2.10.2.Type (for the gaseous gas storage facilities only)
  • Type of storage, such as depleted gas field, aquifer, salt cavern, etc.
  • 2.2.10.3.Working capacity
  • For gaseous gas storage facilities: total gas storage capacity, minus the cushion gas. The cushion gas is the total volume of gas required as a permanent inventory to maintain adequate underground storage reservoir pressures and deliverability rates throughout the output cycle.
  • For LNG terminals: total gas storage capacity expressed in gaseous gas equivalent.
  • 2.2.10.4.Peak output
  • Maximum rate at which gas can be withdrawn from the storage concerned; this corresponds to the maximum withdrawal capacity.
  • 2.2.10.5.Regasifying or liquefying capacity (for LNG terminals only)
  • The regasifying capacity must be reported for import terminals and the liquefying capacity must be reported for export terminals.

2.3.   Units of measurement

Quantities of natural gas should be declared as their energy content, i.e. in TJ, based on the gross calorific value. Where physical quantities are required, the unit is in 106 m3 assuming reference gas conditions (15 °C, 101 325 Pa).

Calorific values should be declared in kJ/m3, assuming reference gas conditions (15 °C, 101 325 Pa).

Working capacity should be declared in 106 m3, assuming reference gas conditions (15 °C, 101 325 Pa).

Peak output, regasifying capacity and liquefying capacity should be declared in 106 m3/day, assuming reference gas conditions (15 °C, 101 325 Pa).

3. ELECTRICITY AND HEAT

3.1.   Applicable energy products

This chapter covers heat and electricity.

3.2.   List of aggregates

The following list of aggregates should be declared for heat and electricity unless otherwise specified.

  • 3.2.1.ELECTRICITY AND HEAT PRODUCTION
  • The following specific definitions apply to the electricity and heat aggregates discussed in this chapter:
  • — Gross electricity production: the sum of the electrical energy produced by all the generating sets concerned (including pumped storage) measured at the output terminals of the main generators.
  • — Gross heat production: the total heat produced by the installation, including the heat used by the installation’s auxiliaries that use a hot fluid (space heating, liquid fuel heating etc.) and losses in the installation/network heat exchanges, as well as heat from chemical processes used as a primary energy form.
  • — Net electricity production: the gross electricity production less the electrical energy absorbed by the generating auxiliaries and the losses in the main generator transformers.
  • — Net heat production: the heat supplied to the distribution system as determined based on measurements of the outgoing and return flows.
  • Aggregates 3.2.1.1 to 3.2.1.11 must be declared separately for main activity producers and for autoproducers. Within these two types of plant, both gross and net electricity and heat production must be declared for electricity-only, heat-only and CHP units, separately wherever applicable. For gross electricity produced in CHP units, the subcategory of which in full CHP-mode should be declared. For net heat produced in CHP units, a separate item on auto-consumed heat should be declared.
  • 3.2.1.1.Nuclear
  • 3.2.1.2.Hydro (applicable only for electricity)
  • 3.2.1.3.Geothermal
  • 3.2.1.4.Solar
  • 3.2.1.5.Tide, wave, ocean (applicable only for electricity)
  • 3.2.1.6.Wind (applicable only for electricity)
  • 3.2.1.7.Combustible fuels
  • Fuels capable of igniting or burning, i.e. reacting with oxygen to produce a significant rise in temperature, and combusted directly for the production of electricity and/or heat.
  • 3.2.1.8.Heat pumps (applicable only for heat)
  • 3.2.1.9.Electric boilers (applicable only for heat)
  • 3.2.1.10.Heat from chemical processes
  • Heat originating from processes without input energy, such as a chemical reaction. Excludes waste heat originating from energy-driven processes, which should be reported as heat produced from the corresponding fuel.
  • 3.2.1.11.Other sources
  • 3.2.2.SUPPLY
  • For 3.2.2.1 and 3.2.2.2., quantities declared should be coherent with the values declared for aggregates 3.2.1.1 to 3.2.1.11.
  • 3.2.2.1.Total gross production
  • 3.2.2.2Total net production
  • 3.2.2.3.Imports
  • Amounts of electricity are considered as imported or exported when they have crossed the political boundaries of a country, whether customs clearance has taken place or not. If electricity transits through a country, the amount should be reported as both an import and an export.
  • 3.2.2.4.Exports
  • See explanation under 3.2.2.3. ‘Imports’.
  • 3.2.2.5.International marine bunkers
  • 3.2.2.6.Used for heat pumps (applicable only for electricity)
  • 3.2.2.7.Used for electric boilers (applicable only for electricity)
  • 3.2.2.8.Used for pumped storage – pure pumped storage plants (applicable only for electricity)
  • 3.2.2.9.Used for pumped storage – Mixed hydro plants (applicable only for electricity)
  • 3.2.2.10.Used for electricity production (applicable only for heat)
  • 3.2.2.11.Used for hydrogen production (transformation)
  • 3.2.3.TRANSMISSION LOSSES
  • 3.2.4.DISTRIBUTION LOSSES
  • 3.2.5.FINAL ENERGY CONSUMPTION – TRANSPORT SECTOR
  • Final energy consumption and final non-energy consumption should be declared separately for the following aggregates.
  • 3.2.5.1.Rail
  • 3.2.5.2.Pipeline transport
  • 3.2.5.3.Road
  • 3.2.5.4.Domestic navigation
  • 3.2.5.5.Not elsewhere specified – Transport
  • 3.2.6.FINAL ENERGY CONSUMPTION – OTHER SECTORS
  • 3.2.6.1.Commercial and public services
  • 3.2.6.2.Households
  • 3.2.6.3.Agriculture
  • 3.2.6.4.Forestry
  • 3.2.6.5.Fishing
  • 3.2.6.6.Not elsewhere specified – Other
  • 3.2.7.ENERGY SECTOR
  • Excludes plants’ own use for pumped storage, heat pumps and electric boilers.
  • 3.2.7.1.Coal mines
  • 3.2.7.2.Oil and gas extraction
  • 3.2.7.3.Patent fuel plants
  • 3.2.7.4.Coke ovens
  • 3.2.7.5.BKB/PB plants
  • 3.2.7.6.Gas works
  • 3.2.7.7.Blast furnaces
  • 3.2.7.8.Petroleum refineries
  • 3.2.7.9.Nuclear industry
  • 3.2.7.10.Coal liquefaction plants
  • 3.2.7.11.Liquefaction (LNG)/Regasification (GNG) plants
  • 3.2.7.12.Gasification plants (biogas)
  • 3.2.7.13.Gas to liquids
  • 3.2.7.14.Hydrogen production, liquefaction and gasification of hydrogen.
  • 3.2.7.16.Charcoal production plants
  • 3.2.7.17.Not elsewhere specified – Energy
  • 3.2.8.INDUSTRY SECTOR
  • 3.2.8.1.Iron and steel
  • 3.2.8.2.Chemical and petrochemical
  • 3.2.8.3.Non-ferrous metals
  • 3.2.8.4.Non-metallic minerals
  • 3.2.8.5.Transport equipment
  • 3.2.8.6.Machinery
  • 3.2.8.7.Mining and quarrying
  • 3.2.8.8.Food, beverages and tobacco
  • 3.2.8.9.Pulp, paper and printing
  • 3.2.8.10.Wood and wood products
  • 3.2.8.11.Construction
  • 3.2.8.12.Textile and leather
  • 3.2.8.13.Not elsewhere specified – Industry
  • 3.2.9.IMPORTS AND EXPORTS
  • Imports and exports of quantities of electricity and heat by country of origin and destination, respectively, have to be reported. See explanation under 3.2.2.3. ‘Imports’.
  • 3.2.10.NET PRODUCTION FROM AUTOPRODUCERS
  • For the following plants or activities, net production of electricity and net generation of heat from autoproducers should be declared separately for electricity-only, heat-only and CHP units:
  • 3.2.10.1. Energy sector: Coal mines
  • 3.2.10.2. Energy sector: Oil and gas extraction
  • 3.2.10.3. Energy sector: Patent fuel plants
  • 3.2.10.4. Energy sector: Coke ovens
  • 3.2.10.5. Energy sector: BKB/PB plants
  • 3.2.10.6. Energy sector: Gas works
  • 3.2.10.7. Energy sector: Blast furnaces
  • 3.2.10.8. Energy sector: Petroleum refineries
  • 3.2.10.9. Energy sector: Coal liquefaction plants
  • 3.2.10.10. Energy sector: Liquefaction (LNG)/Regasification plants
  • 3.2.10.11. Energy sector: Gasification plants (biogas)
  • 3.2.10.12. Energy sector: Gas to liquids
  • 3.2.10.13. Energy sector: Charcoal production plants
  • 3.2.10.14. Energy sector: Hydrogen production, liquefaction, gasification.
  • 3.2.10.15. Energy sector: Not elsewhere specified – Energy
  • 3.2.10.16. Industry sector: Iron and steel
  • 3.2.10.17. Industry sector: Chemical and petrochemical
  • 3.2.10.18. Industry sector: Non-ferrous metals
  • 3.2.10.19. Industry sector: Non-metallic minerals
  • 3.2.10.20. Industry sector: Transport equipment
  • 3.2.10.21. Industry sector: Machinery
  • 3.2.10.22. Industry sector: Mining and quarrying
  • 3.2.10.23. Industry sector: Food, beverages and tobacco
  • 3.2.10.24. Industry sector: Pulp, paper and printing
  • 3.2.10.25. Industry sector: Wood and wood products
  • 3.2.10.26. Industry sector: Construction
  • 3.2.10.27. Industry sector: Textile and leather
  • 3.2.10.28. Industry sector: Not elsewhere specified – Industry
  • 3.2.10.29. Transport Sector: Rail
  • 3.2.10.30. Transport Sector: Pipeline transport
  • 3.2.10.31. Transport Sector: Road
  • 3.2.10.32. Transport Sector: Not elsewhere specified – Transport
  • 3.2.10.33. Other sectors: Households
  • 3.2.10.34. Other sectors: Commercial and public services
  • 3.2.10.35. Other sectors: Agriculture/Forestry
  • 3.2.10.36. Other sectors: Fishing
  • 3.2.10.37. Other sectors: Not elsewhere specified – Other
  • 3.2.11.NET PRODUCTION OF ELECTRICITY BY SECTOR
  • Total net production of electricity and the part that is auto-consumed (without splitting between main activity producer and autoproducer) must be declared separately for households, commercial and public services, energy sector, industry sector and other sectors for each of the following groups of fuels:
  • 3.2.11.1. Solar PV
  • 3.2.11.2. Solid, liquid and gaseous biofuels
  • 3.2.11.3. Other renewables
  • 3.2.11.4. Natural gas
  • 3.2.11.5. Other (non-renewables)
  • 3.2.12.GROSS ELECTRICITY AND HEAT PRODUCTION FROM COMBUSTIBLE FUELS
  • The gross electricity produced, the heat sold and the fuel quantities used, including their corresponding total energy from the combustibles listed below, must be declared separately for main activity producers and for autoproducers. For these two types of producer, electricity and heat production must be declared separately wherever applicable for electricity-only, heat-only and CHP units.
  • 3.2.12.1.Anthracite
  • 3.2.12.2.Coking Coal
  • 3.2.12.3.Other bituminous coal
  • 3.2.12.4.Sub-bituminous coal
  • 3.2.12.5.Lignite
  • 3.2.12.6.Peat
  • 3.2.12.7.Patent fuel
  • 3.2.12.8.Coke oven coke
  • 3.2.12.9.Gas coke
  • 3.2.12.10.Coal tar
  • 3.2.12.11.BKB (brown coal briquettes)
  • 3.2.12.12.Gas works gas
  • 3.2.12.13.Coke oven gas
  • 3.2.12.14.Blast furnace gas
  • 3.2.12.15.Other recovered gases
  • 3.2.12.16.Peat products
  • 3.2.12.17.Oil shale and oil sands
  • 3.2.12.18.Crude oil
  • 3.2.12.19.NGL
  • 3.2.12.20.Refinery gas
  • 3.2.12.21.LPG
  • 3.2.12.22.Naphtha
  • 3.2.12.23.Kerosene type jet fuel
  • 3.2.12.24.Other kerosene
  • 3.2.12.25.Gas/Diesel oil
  • 3.2.12.26.Fuel oil
  • 3.2.12.27.Bitumen
  • 3.2.12.28.Petroleum coke
  • 3.2.12.29.Other oil products
  • 3.2.12.30.Natural gas
  • 3.2.12.31.Industrial waste
  • 3.2.12.32.Renewable municipal waste
  • 3.2.12.33.Non-renewable municipal waste
  • 3.2.12.34.Solid biofuels
  • 3.2.12.35.Biogases
  • 3.2.12.36.Biodiesels
  • 3.2.12.37.Biogasolines
  • 3.2.12.38.Other liquid biofuels
  • 3.2.12.39.Hydrogen
  • 3.2.13.NET MAXIMUM ELECTRICAL CAPACITY
  • The capacity should be declared as on 31 December of the relevant reported year and for the fuels indicated below. Includes electrical capacity of both electricity-only and CHP units. The net maximum electrical capacity must be declared for both main activity producers and autoproducers. It is the sum of the net maximum capacities of all stations taken individually over a given period of operation. The period of operation assumed for present purposes is continuous running: in practice 15 hours or more per day. The net maximum capacity is the maximum power assumed to be solely active power that can be supplied, continuously, with the whole plant running, at the point of outlet to the network.
  • 3.2.13.1.Nuclear
  • 3.2.13.2.Pure hydro plants
  • 3.2.13.3.Mixed hydro plants
  • 3.2.13.4.Pure pumped storage plants
  • 3.2.13.5.Geothermal
  • 3.2.13.6.Solar photovoltaic
  • 3.2.13.7.Solar thermal
  • 3.2.13.8.Tide, wave, ocean
  • 3.2.13.9.Wind
  • 3.2.13.10.Combustible fuels
  • 3.2.13.10.1.Type of generation: Steam
  • 3.2.13.10.2.Type of generation: Internal combustion
  • 3.2.13.10.3.Type of generation: Gas turbine
  • 3.2.13.10.4.Type of generation: Combined cycle
  • 3.2.13.10.5.Type of generation: Other
  • 3.2.13.11.Hydrogen fuel cells
  • 3.2.13.12.Other sources
  • 3.2.14.NET MAXIMUM ELECTRICAL CAPACITY OF COMBUSTIBLE FUELS
  • Net maximum electrical capacity of combustible fuels must be declared for both main activity producers and autoproducers, and separately for each type of single-fired or multi-fired plant mentioned below. Multi-fired systems include only units which can burn more than one fuel type on a continuous basis. Stations which have separate units using different fuels should be divided into the appropriate single-fuel categories. Indications on which type of fuel is used as primary and alternate must be added for each category of multi-fired plants.
  • 3.2.14.1.Single-fuel fired (for all categories of primary fuels)
  • 3.2.14.2.Multi-fired solids and liquids
  • 3.2.14.3.Multi-fired solids and natural gas
  • 3.2.14.4.Multi-fired liquids and natural gas
  • 3.2.14.5.Multi-fired solids, liquids and natural gas
  • 3.2.15.NEWLY INSTALLED AND DECOMMISSIONED ELECTRICAL CAPACITY
  • Newly installed capacity is the net maximum electrical capacity of the generation units that become operational in the reference year. Decommissioned capacity is the net maximum electrical capacity that is no longer operational during the reference year.
  • For all fuels indicated under 3.2.13 and 3.2.14, the newly installed and decommissioned capacity should be reported for the reference year.
  • 3.2.16.BATTERIES
  • The storage capacity or energy capacity of a battery is the total quantity of energy that the battery can store. The rated power capacity is the maximum rate of discharge that the battery can achieve, starting from a fully charged state. The information below should be declared for batteries connected to the grid and used as storing/balancing element. Only batteries with a storage capacity equal to or above 1 MWh and only exchanges with the grid need to be declared.
  • 3.2.16.1.Storage capacity of batteries
  • 3.2.16.2.Rated power capacity of batteries
  • 3.2.16.3.Electricity injected in the grid from batteries
  • 3.2.16.4.Electricity used from the grid to charge batteries
  • Each of the elements above should be split in the following size groups of storage capacity:
  • — From 1 MWh to 10 MWh
  • — From more than 10 MWh to 100 MWh
  • — More than 100 MWh.

3.3.   Units of measurement

Electricity should be declared in GWh (giga-watt hours), heat in TJ (tera-joules) and capacity in MW (megawatts). For batteries, storage capacity should be declared in MWh and rated power capacity in MW.

If reporting of other fuels is required, the applicable units are defined in the relevant chapters of this annex.

4. OIL AND PETROLEUM PRODUCTS

4.1.   Applicable energy products

Unless otherwise specified, this data collection applies to all energy products listed in Annex A, Chapter 3.4. OIL (crude oil and petroleum products)

4.2.   List of aggregates

The following list of aggregates should be declared for all energy products listed in the previous paragraph, unless otherwise specified.

4.2.1.   SUPPLY OF CRUDE OIL, NGL, REFINERY FEEDSTOCKS, ADDITIVES AND OTHER HYDROCARBONS

The following aggregates should be declared for crude oil, NGL, refinery feedstocks, additives/oxygenates, biofuels in additives/oxygenates and other hydrocarbons:

  • 4.2.1.1.Indigenous production
  • Not applicable for refinery feedstocks and for biofuels.
  • 4.2.1.2.Receipts from other sources.
  • Not applicable for crude oil, NGL and refinery feedstocks.
  • 4.2.1.2.1.Receipts from other sources: from coal
  • 4.2.1.2.2.Receipts from other sources: from natural gas
  • 4.2.1.2.3.Receipts from other sources: from renewables
  • 4.2.1.2.4.Receipts from other sources: from hydrogen
  • 4.2.1.3.Backflows from petrochemical sector
  • Only applicable for refinery feedstocks.
  • 4.2.1.4.Products transferred
  • Only applicable for refinery feedstocks.
  • 4.2.1.5.Imports
  • Includes quantities of crude oil and products imported or exported under processing agreements (i.e. refining on account). Crude oil and NGLs should be reported as coming from the country of ultimate origin; refinery feedstocks and finished products should be reported as coming from the country of last consignment. Includes any gas liquids (e.g. LPG) extracted during the regasification of imported liquefied natural gas and petroleum products imported or exported directly by the petrochemical industry. Note: all trade of biofuels which have not been blended with transport fuels (i.e. in their pure form) should not be reported here. Re-exports of oil imported for processing within bonded areas should be included as an export of product from the processing country to the final destination.
  • 4.2.1.6.Exports
  • The note for imports (4.2.1.5.) also applies to exports.
  • 4.2.1.7.Direct Use
  • 4.2.1.8.Stock changes
  • 4.2.1.9.Observed refinery intake
  • Amounts measured as input to refineries
  • 4.2.1.10.Refinery losses
  • The difference between refinery intake (observed) and gross refinery output. Losses may occur during the distillation processes due to evaporation. Reported losses are positive. There may be volumetric gains but no gains in mass.
  • 4.2.1.11.Opening total stocks on national territory
  • 4.2.1.12.Closing total stocks on national territory
  • 4.2.1.13.Net calorific value
  • 4.2.1.13.1.Production (not applicable for refinery feedstocks and Biofuels in Additives/Oxygenates)
  • 4.2.1.13.2.Imports (not applicable for biofuels in additives/oxygenates)
  • 4.2.1.13.3.Exports (not applicable for biofuels in additives/oxygenates)
  • 4.2.1.13.4.Overall average
4.2.2.   SUPPLY OF OIL PRODUCTS

The following aggregates apply to finished products (refinery gas, ethane, LPG, naphtha, motor gasoline as well as its part of biogasoline, aviation gasoline, gasoline type jet fuel, kerosene type jet fuel as well as its bio part, other kerosene, gas/diesel oil, low and high sulphur fuel oil, white spirit and SBP, lubricants, bitumen, paraffin waxes, petroleum coke and other products). Crude oil and NGL used for direct burn should be included in deliveries of finished products and interproduct transfers.

  • 4.2.2.1.Primary product receipts
  • 4.2.2.2.Gross refinery output
  • 4.2.2.3.Recycled products
  • 4.2.2.4.Refinery fuel (petroleum refineries)
  • Fuels used for production at refineries of electricity and heat sold should also be included in this category.
  • 4.2.2.4.1.Used in electricity only units/plants
  • 4.2.2.4.2.Used in CHP units
  • 4.2.2.4.3.Used in heat only units/plants
  • 4.2.2.5.Imports
  • The note for imports in Section 4.2.1.5. also applies here.
  • 4.2.2.6.Exports
  • The note for imports in Section 4.2.1.5. also applies here.
  • 4.2.2.7.International marine bunkers
  • 4.2.2.8.Interproduct transfers
  • 4.2.2.9.Products transferred
  • 4.2.2.10.Stock changes
  • 4.2.2.11.Opening stock levels
  • 4.2.2.12.Closing stock levels
  • 4.2.2.13.Stock changes at main activity producers
  • Changes in stocks which are held by public utilities and are not included in stock levels and stock changes reported elsewhere. A stock build is shown as a negative number and a stock draw is shown as a positive number.
  • 4.2.2.14.Average net calorific values
4.2.3.   DELIVERIES TO THE PETROCHEMICAL SECTOR

The observed delivery of finished petroleum products from primary sources (e.g. refineries, blending plants, etc.) to the inland market.

  • 4.2.3.1.Gross deliveries to the petrochemical sector
  • 4.2.3.2.Energy use in the petrochemical sector
  • Quantities of oil used as fuel for petrochemical processes such as steam cracking.
  • 4.2.3.3.Non-energy use in the petrochemical sector
  • Quantities of oil used in the petrochemical sector for the purpose of producing ethylene, propylene, butylene, synthesis gas, aromatics, butadiene and other hydrocarbon-based raw materials in processes such as steam cracking, aromatics plants and steam reforming. Excludes amounts of oil used for fuel purposes.
  • 4.2.3.4.Backflows from petrochemical sector to refineries
4.2.4.   TRANSFORMATION SECTOR

The quantities involved in both energy use and non-energy use must be declared.

  • 4.2.4.1.Main activity producer electricity only
  • 4.2.4.2.Autoproducer electricity only
  • 4.2.4.3.Main activity producer CHP units
  • 4.2.4.4.Autoproducer CHP units
  • 4.2.4.5.Main activity producer heat Only
  • 4.2.4.6.Autoproducer heat only
  • 4.2.4.7.Gas works/Gasification plants
  • 4.2.4.8.Blended natural gas
  • 4.2.4.9.Coke ovens
  • 4.2.4.10.Blast furnaces
  • 4.2.4.11.Petrochemical industry
  • 4.2.4.12.Patent fuel plants
  • 4.2.4.13.Production of hydrogen
  • 4.2.4.14.Not elsewhere specified – Transformation
4.2.5.   ENERGY SECTOR

Both the quantities involved in energy use and non-energy use shall be declared.

  • 4.2.5.1.Coal Mines
  • 4.2.5.2.Oil and Gas Extraction
  • 4.2.5.3.Coke Ovens
  • 4.2.5.4.Blast Furnaces
  • 4.2.5.5.Gas Works
  • 4.2.5.6.Own use Electricity, CHP and heat plants
  • 4.2.5.7.Hydrogen production, liquefaction and gasification.
  • 4.2.5.8.Not Elsewhere Specified – Energy
4.2.6.   TRANSMISSION AND DISTRIBUTION LOSSES

The quantities involved both in energy use and non-energy use must be declared.

4.2.7.   FINAL ENERGY CONSUMPTION – INDUSTRY SECTOR

The quantities involved both in energy use and non-energy use must be declared.

  • 4.2.7.1.Iron and steel
  • 4.2.7.2.Chemical and petrochemical
  • 4.2.7.3.Non-ferrous metals
  • 4.2.7.4.Non-metallic minerals
  • 4.2.7.5.Transport equipment
  • 4.2.7.6.Machinery
  • 4.2.7.7.Mining and quarrying
  • 4.2.7.8.Food, beverages and tobacco
  • 4.2.7.9.Pulp, paper and printing
  • 4.2.7.10.Wood and wood products
  • 4.2.7.11.Construction
  • 4.2.7.12.Textile and leather
  • 4.2.7.13.Not elsewhere specified – Industry
4.2.8.   FINAL ENERGY CONSUMPTION – TRANSPORT SECTOR

The quantities involved in both energy use and non-energy use must be declared.

  • 4.2.8.1.International aviation
  • 4.2.8.2.Domestic aviation
  • 4.2.8.3.Road
  • 4.2.8.4.Rail
  • 4.2.8.5.Domestic navigation
  • 4.2.8.6.Pipeline transport
  • 4.2.8.7.Not elsewhere specified – Transport
4.2.9.   FINAL ENERGY CONSUMPTION – OTHER SECTORS

The quantities involved in both energy use and non-energy use must be declared.

  • 4.2.9.1.Commercial and public services
  • 4.2.9.2.Households
  • 4.2.9.3.Agriculture
  • 4.2.9.4.Forestry
  • 4.2.9.5.Fishing
  • 4.2.9.6.Not elsewhere specified – Other
4.2.10.   IMPORTS BY COUNTRY OF ORIGIN AND EXPORTS BY COUNTRY OF DESTINATION

Imports should be declared by country of origin and exports by country of destination. The note for imports in Section 4.2.1.5 also applies here.

4.2.11.   REFINERY CAPACITY

Report the national total refining capacity and the breakdown of annual capacity by refinery in thousand metric tons per year. The following items should be reported:

  • 4.2.11.1.Name/Location
  • 4.2.11.2.Atmospheric distillation
  • 4.2.11.3.Vacuum distillation
  • 4.2.11.4.Cracking (thermal)
  • 4.2.11.4.1.Of which visbreaking
  • 4.2.11.4.2.Of which coking
  • 4.2.11.5.Cracking (catalytic)
  • 4.2.11.5.1.Of which fluid catalytic cracking (FCC)
  • 4.2.11.5.2.Of which hydro-cracking (HCK)
  • 4.2.11.6.Reforming
  • 4.2.11.7.Desulphurisation
  • 4.2.11.8.Alkylation, polymerisation, isomeration
  • 4.2.11.9.Etherification

4.3.   Units of measurement

Reported quantities must be declared in kt (kilo-tonnes). Calorific values must be declared in MJ/t (mega-joules per tonne).

4.4.   Exemptions

Cyprus is exempted from reporting the aggregates specified in Section 4.2.9 (Final energy consumption – Other sectors); only the total values should be reported. Cyprus is also exempted from reporting non-energy use under Sections 4.2.4 (Transformation sector), 4.2.5 (Energy sector), 4.2.7 (Industry), 4.2.7.2 (Industry sector – of which chemical and petrochemical), 4.2.8 (Transport) and 4.2.9 (Other sectors).

5. RENEWABLE ENERGY AND ENERGY FROM WASTE

5.1.   Applicable energy products

Unless otherwise specified, this data collection applies to all energy products listed in Annex A, Chapter 3.5. RENEWABLES AND WASTE. Only quantities of fuels used for energy purposes (for example in electricity and heat generation, combustion with energy recovery, in mobile engines in transport and for use in stationary engines) should be reported. Quantities of renewable energy products used to replace fossil fuels for non-energy purposes should be reported in Section 5.2.9, but they should not be included in the rest of sections in this chapter. Renewable products that have not been developed to replace fossil fuels should be excluded from reporting in Section 5.2.9, such as solid biofuels used for furniture, construction and paper/cardboard production, alcohols used in food industry and cotton/natural fibres used in textile industry. Passive thermal energy should be excluded from reporting in Chapter 5 (for example, passive solar thermal heating of buildings).

5.2.   List of aggregates

Unless otherwise specified, the following list of aggregates should be declared for all energy products listed in the previous paragraph. Ambient heat (heat pumps) only needs to be reported for the following sectors: Transformation (only for aggregates related to heat sold), Energy (only total, no subcategories), Industry total (only total, no subcategories), Commercial and public services, Households and Not elsewhere specified – Other. For ambient heat (heat pumps), the subcategories Aerothermal, Geothermal and Hydrothermal should be declared under indigenous production. For each of these three categories, the subcategory Of which from heat pumps with SPF above the threshold should be declared. The SPF (seasonal performance factor) threshold should be in accordance with Directive 2009/28/EC and Directive (EU) 2018/2001 on the promotion of the use of energy from renewable sources.

5.2.1.   GROSS ELECTRICITY AND HEAT PRODUCTION

The definitions offset out in Chapter 3.2.1. apply. The aggregates 5.2.1.1 to 5.2.1.18 must be declared separately for main activity producers and for autoproducers. For these two types of plant, gross electricity and gross heat production must be declared for electricity-only, heat-only and CHP units, separately wherever applicable.

  • 5.2.1.1.Pure hydro plants (applicable only for electricity)
  • 5.2.1.2.Mixed hydro plants (applicable only for electricity)
  • 5.2.1.2.1.Of which pumping (applicable only for electricity)
  • 5.2.1.3.Pure pumped storage plants (applicable only for electricity)
  • 5.2.1.4.Geothermal
  • 5.2.1.5.Solar photovoltaic (applicable only for electricity)
  • The following size subcategories should be declared for solar photovoltaic:
  • 5.2.1.5.1.Less than 30 kW
  • 5.2.1.5.2.From 30 to 1 000 kW
  • 5.2.1.5.3.More than 1 000 kW
  • For 5.2.1.5.1 to 5.2.1.5.3, the subcategories rooftop and off-grid should be declared. The off-grid category is mandatory only if it accounts for 1% or more of the photovoltaic capacity in its respective size category.
  • 5.2.1.6.Solar thermal
  • 5.2.1.7.Tide, wave, ocean (applicable only for electricity)
  • 5.2.1.8.Wind (applicable only for electricity)
  • 5.2.1.9.On-shore wind
  • 5.2.1.10.Offshore wind
  • 5.2.1.11.Renewable municipal waste
  • 5.2.1.12.Non-renewable municipal waste
  • 5.2.1.13.Solid biofuels
  • 5.2.1.14.Biogases
  • 5.2.1.15.Biodiesels
  • 5.2.1.16.Biogasolines
  • 5.2.1.17.Other liquid biofuels
  • 5.2.1.18.Heat pumps (applicable only for heat)
5.2.2.   SUPPLY
  • 5.2.2.1.Production
  • 5.2.2.2.Imports
  • 5.2.2.3.Exports
  • 5.2.2.4.International marine bunkers
  • 5.2.2.5.Stock changes
5.2.3.   TRANSFORMATION SECTOR
  • 5.2.3.1.Main activity producer electricity only
  • 5.2.3.2.Main activity producer combined heat and power (CHP) units
  • 5.2.3.3.Main activity producer heat only
  • 5.2.3.4.Autoproducer electricity only
  • 5.2.3.5.Autoproducer combined heat and power (CHP) units
  • 5.2.3.6.Autoproducer heat only
  • 5.2.3.7.Patent fuel plants
  • 5.2.3.8.BKB/PB plants
  • 5.2.3.9.Blast Furnaces
  • 5.2.3.10.Blended in the gas grid (e.g. Natural gas blending plants)
  • 5.2.3.11.Blended with liquid fossil fuels (e.g. motor gasoline / diesel / kerosene)
  • 5.2.3.12.Charcoal production plants
  • 5.2.4.13.Production of hydrogen
  • 5.2.3.14.Not elsewhere specified – Transformation
5.2.4.   ENERGY SECTOR
  • 5.2.4.1.Gasification plants (biogas)
  • 5.2.4.2.Electricity, CHP and heat plants
  • 5.2.4.3.Coal mines
  • 5.2.4.4.Patent fuel plants
  • 5.2.4.5.Coke ovens
  • 5.2.4.6.Petroleum refineries
  • 5.2.4.7.BKB/PB plants
  • 5.2.4.8.Gas works
  • 5.2.4.9.Blast furnaces
  • 5.2.4.10.Charcoal production plants
  • 5.2.4.11.Hydrogen production, liquefaction and gasification
  • 5.2.4.12.Not elsewhere specified – Energy
5.2.5.   TRANSMISSION AND DISTRIBUTION LOSSES
5.2.6.   FINAL ENERGY CONSUMPTION – INDUSTRY SECTOR
  • 5.2.6.1.Iron and steel
  • 5.2.6.2.Chemical and petrochemical
  • 5.2.6.3.Non-ferrous metals
  • 5.2.6.4.Non-metallic minerals
  • 5.2.6.5.Transport equipment
  • 5.2.6.6.Machinery
  • 5.2.6.7.Mining and quarrying
  • 5.2.6.8.Food, beverages and tobacco
  • 5.2.6.9.Pulp, paper and printing
  • 5.2.6.10.Wood and wood products
  • 5.2.6.11.Construction
  • 5.2.6.12.Textile and leather
  • 5.2.6.13.Not elsewhere specified – Industry
5.2.7.   FINAL ENERGY CONSUMPTION – TRANSPORT SECTOR
  • 5.2.7.1.Rail
  • 5.2.7.2.Road
  • 5.2.7.3.Domestic navigation
  • 5.2.7.4.Domestic aviation
  • 5.2.7.5.International aviation
  • 5.2.7.6.Not elsewhere specified – Transport
5.2.8.   FINAL ENERGY CONSUMPTION – OTHER SECTORS
  • 5.2.8.1.Commercial and public services
  • 5.2.8.2.Households
  • 5.2.8.3.Agriculture
  • 5.2.8.4.Forestry
  • 5.2.8.5.Fishing
  • 5.2.8.6.Not elsewhere specified – Other
5.2.9.   FINAL CONSUMPTION – NON-ENERGY USE

For the following items:

  • 5.2.9.1. Transport sector
  • 5.2.9.2. Industry sector
  • 5.2.9.3. Other sectors

The final consumption – non-energy use should be declared for the following groups of fuels:

  • 5.2.9.4. Solid biofuels
  • 5.2.9.5. Liquid biofuels
  • 5.2.9.6. Biogases

The first reference year to declare the elements in Section 5.2.9 is 2024. Until reference year 2027 only the aggregate total final consumption – non-energy use can be declared instead of items 5.2.9.1 to 5.2.9.3 separately. The quantities reported in 5.2.9 should not be included in 5.2.2 to 5.2.8.

5.2.10.   NET MAXIMUM ELECTRICAL CAPACITY

Capacity should be declared as on 31 December of the relevant reported year. Includes the electrical capacity of both electricity-only and CHP units. The net maximum electrical capacity is the sum of the net maximum capacities of all stations taken individually over a specific period of operation. The period of operation assumed for present purposes is continuous running: in practice 15 hours or more per day. The net maximum capacity is the maximum power assumed to be solely active power that can be supplied, continuously, with the whole plant running, at the point of outlet to the network.

  • 5.2.10.1.Pure hydro plants
  • 5.2.10.2.Mixed hydro plants
  • 5.2.10.3.Pure pumped storage plants
  • 5.2.10.4.Geothermal
  • 5.2.10.5.Solar photovoltaic

The following size subcategories should be declared for solar photovoltaic:

  • 5.2.10.5.1. Less than 30 kW
  • 5.2.10.5.2. Between 30 and 1 000 kW
  • 5.2.10.5.3. More than 1 000 kW

For 5.2.10.5.1 to 5.2.10.5.3, the subcategories rooftop and off-grid should be declared. The off-grid category is mandatory only if it accounts for 1% or more of the capacity in its respective size category.

  • 5.2.10.6.Solar thermal
  • 5.2.10.7.Tide, wave, ocean
  • 5.2.10.8.On-shore wind
  • 5.2.10.9.Offshore wind
  • 5.2.10.10.Industrial waste
  • 5.2.10.11.Municipal waste
  • 5.2.10.12.Solid biofuels
  • 5.2.10.13.Biogases
  • 5.2.10.14.Biodiesels
  • 5.2.10.15.Biogasolines
  • 5.2.10.16.Other liquid biofuels
5.2.11.   TECHNICAL CHARACTERISTICS
  • 5.2.11.1.Solar collector surface
  • The total surface area of the installed solar collectors is to be declared. The solar collector surface relates only to solar collectors used for the production of solar thermal heat; solar collector surface used for electricity generation does not have to be reported here (solar PV and concentrated solar power). The surface area of all solar collectors should be included: glazed and unglazed collectors, flat-plate and vacuum tube with a liquid or air as the energy carrier.
  • 5.2.11.2.Production capacity for Biogasoline
  • 5.2.11.3.Production capacity for Biodiesels
  • 5.2.11.4.Production capacity for Bio jet kerosene
  • 5.2.11.5.Production capacity for Other liquid biofuels
  • 5.2.11.6.Average net calorific value for Biogasoline
  • 5.2.11.7.Average net calorific value for Bioethanol
  • 5.2.11.8.Average net calorific value for Biodiesels
  • 5.2.11.9.Average net calorific value for Bio jet kerosene
  • 5.2.11.10.Average net calorific value for Other liquid biofuels
  • 5.2.11.11.Average net calorific value for Charcoal
  • 5.2.11.12.Thermal capacity of heat pumps: Aerothermal
  • 5.2.11.12.1.Thermal capacity of heat pumps: Aerothermal Air-Air
  • 5.2.11.12.2.Thermal capacity of heat pumps: Aerothermal Air-Water
  • 5.2.11.12.3.Thermal capacity of heat pumps: Aerothermal Air-Air (reversible)
  • 5.2.11.12.4.Thermal capacity of heat pumps: Aerothermal Air-Water (reversible)
  • 5.2.11.12.5.Thermal capacity of heat pumps: Aerothermal Exhaust Air-Air
  • 5.2.11.12.6.Thermal capacity of heat pumps: Aerothermal Exhaust Air-Water
  • 5.2.11.13.Thermal capacity of heat pumps: Geothermal energy
  • 5.2.11.13.1.Thermal capacity of heat pumps: Geothermal energy Ground-Air
  • 5.2.11.13.2.Thermal capacity of heat pumps: Geothermal energy Ground-Water
  • 5.2.11.14.Thermal capacity of heat pumps: Hydrothermal heat
  • 5.2.11.14.1.Thermal capacity of heat pumps: Hydrothermal heat Water-Air
  • 5.2.11.14.2.Thermal capacity of heat pumps: Hydrothermal heat Water-Water
  • For all items from 5.2.11.12 to 5.2.11.14.2, the subcategory Of which from heat pumps with SPF above the threshold should be declared. The SPF (seasonal performance factor) threshold should be in accordance with Directives 2009/28/EC and (EU) 2018/2001 on the promotion of the use of energy from renewable sources.
5.2.12.   PRODUCTION OF SOLID BIOFUELS AND BIOGASES

The total production of solid biofuels (excluding charcoal) should be split among the following fuels:

  • 5.2.12.1.Fuelwood, wood residues and by-products
  • 5.2.12.1.1.Wood pellets as part of Fuelwood, wood residues and by-products
  • 5.2.12.2.Black liquor
  • 5.2.12.3.Bagasse
  • 5.2.12.4.Animal waste
  • 5.2.12.5.Other vegetal materials and residues
  • 5.2.12.6.Renewable fraction of industrial waste
  • The total production of biogas should be split among the following production methods:
  • 5.2.12.7.Biogases from anaerobic fermentation: landfill gas
  • 5.2.12.8.Biogases from anaerobic fermentation: sewage sludge gas
  • 5.2.12.9.Biogases from anaerobic fermentation: other biogases from anaerobic fermentation
  • 5.2.12.10.Biogases from thermal processes
5.2.13.   IMPORTS BY COUNTRY OF ORIGIN AND EXPORTS BY COUNTRY OF DESTINATION

Imports should be reported by country of origin and exports by country of destination. Applicable to biogasolines, bioethanol, bio jet kerosene, biodiesels, other liquid biofuels, wood pellets.

5.3.   Units of measurement

Electricity must be declared in GWh (giga-watt hours), heat in TJ (tera-joules) and electrical capacity in MW (megawatts).

Reported quantities must be declared in TJ NCV (tera-joules based on net calorific value), except for charcoal, biogasoline, bioethanol, bio jet kerosenese, biodiesels, and other liquid biofuels which must be declared in kt (kilo-tonnes).

Calorific values must be declared in MJ/t (mega-joules per tonne).

Solar collector surface must be declared in 1 000 m2.

Production capacity must be declared in kt (kilo-tonnes) per year.

6. ANNUAL NUCLEAR STATISTICS

The following data concerning the civil use of nuclear energy must be declared:

6.1.   List of aggregates

6.1.1.   ENRICHMENT CAPACITY

The annual separative work capacity of operational enrichment plants (isotopic separation of uranium).

6.1.2.   PRODUCTION CAPACITY OF FRESH FUEL ELEMENTS

The annual production capacity of fuel fabrication plants. MOX fuel fabrication plants are excluded.

6.1.3.   PRODUCTION CAPACITY OF MOX FUEL FABRICATION PLANTS

The annual production capacity of MOX fuel fabrication plants.

MOX is a fuel that contains a mixture of plutonium and uranium (mixed oxide).

6.1.4.   PRODUCTION OF FRESH FUEL ELEMENTS

Production of finished fresh fuel elements in nuclear fuel fabrication plants. Rods or other partial products are not included. Fabrication plants producing MOX fuel are also excluded.

6.1.5.   PRODUCTION OF MOX FUEL ELEMENTS

Production of finished fresh fuel elements in MOX fuel fabrication plants. Rods or other partial products are not included.

6.1.6.   PRODUCTION OF NUCLEAR HEAT

The total amount of heat generated by nuclear reactors for the production of electricity or for other useful applications of heat.

6.1.7.   ANNUAL AVERAGE BURNUP OF DEFINITIVELY DISCHARGED IRRADIATED FUEL ELEMENTS

Calculated average of the burnup of the fuel elements which have been definitively discharged from nuclear reactors during the reference year concerned. Excludes fuel elements which are temporarily discharged and are likely to be reloaded again later.

6.1.8.   PRODUCTION OF URANIUM AND PLUTONIUM IN REPROCESSING PLANTS

Uranium and plutonium produced in reprocessing plants during the reference year.

6.1.9.   CAPACITY (URANIUM AND PLUTONIUM) OF REPROCESSING PLANTS

Annual reprocessing capacity of uranium and plutonium.

6.2.   Units of measurement

tSWU (tonnes of separative work units) for 6.1.1.

tHM (tonnes of heavy metal) for 6.1.4, 6.1.5., 6.1.8.

tHM (tonnes of heavy metal) per year for 6.1.2., 6.1.3, 6.1.9

TJ (tera-joules) for 6.1.6.

GWd/tHM (gigawatt-day per tonne of heavy metal) for 6.1.7.

7. HYDROGEN

The following data concerning hydrogen must be declared for the first time for reference year 2024:

7.1.   List of aggregates

7.1.1.   SUPPLY
  • 7.1.1.1.Indigenous production
  • 7.1.1.1.1.From natural gas
  • 7.1.1.1.2.From oil and petroleum products
  • 7.1.1.1.3.From solid fuels
  • 7.1.1.1.4.From renewables (including renewable waste)
  • 7.1.1.1.5.From non-renewable waste
  • 7.1.1.1.6.From electrolysis
  • 7.1.1.1.6.1.Of which: electricity from renewables – direct transmission line
  • 7.1.1.1.6.2.Of which: electricity from nuclear – direct transmission line
  • 7.1.1.1.6.3.Of which: electricity from fossil fuels – direct transmission line
  • 7.1.1.1.7.From electricity – Others
  • 7.1.1.1.8.From other sources (Others)
  • 7.1.1.2.Imports
  • 7.1.1.3.Exports
  • 7.1.1.4.Stock changes
  • 7.1.1.5.International marine bunkers
  • 7.1.1.6.International aviation
7.1.2.   TRANSFORMATION SECTOR
  • 7.1.2.1.Main activity producer electricity
  • 7.1.2.2.Autoproducer electricity
  • 7.1.2.3.Main activity producer CHP
  • 7.1.2.4.Autoproducer CHP
  • 7.1.2.5.Main activity producer heat
  • 7.1.2.6.Autoproducer heat
  • 7.1.2.7.Gas works (and other conversion to gases)
  • 7.1.2.8.Petroleum refineries
  • 7.1.2.9.Natural gas blending plans
  • 7.1.2.10.For blending with motor gasoline/diesel/kerosene
  • 7.1.2.11.For blending with renewables
  • 7.1.2.12.Hydrogen blended with renewable fuels
  • 7.1.2.13.Not elsewhere specified (Transformation)
7.1.3.   ENERGY SECTOR
  • 7.1.3.1.Coal mines
  • 7.1.3.2.Oil and gas extraction
  • 7.1.3.3.Petroleum refineries
  • 7.1.3.4.Coke ovens (Energy)
  • 7.1.3.5.Blast furnaces (Energy)
  • 7.1.3.6.Gas works (Energy)
  • 7.1.3.7.Electricity, CHP and heat
  • 7.1.3.8.Hydrogen production, liquefaction and gasification
  • 7.1.3.10.Not elsewhere specified (Energy)
7.1.4.   TRANSMISSION AND DISTRIBUTION LOSSES
7.1.5   FINAL NON- ENERGY CONSUMPTION – INDUSTRY SECTOR
  • 7.1.5.1.Iron and steel
  • 7.1.5.2.Chemical and petrochemical
  • 7.1.5.3.Non-ferrous metals
  • 7.1.5.4.Non-metallic minerals
  • 7.1.5.5.Transport equipment
  • 7.1.5.6.Machinery
  • 7.1.5.7.Mining and quarrying
  • 7.1.5.8.Food, beverages and tobacco
  • 7.1.5.9.Paper, pulp and printing
  • 7.1.5.10.Wood and wood products
  • 7.1.5.11.Construction
  • 7.1.5.12.Textiles and leather
  • 7.1.5.13.Not elsewhere specified (Industry)
  • 7.1.5.14.Other sectors
7.1.6.   FINAL ENERGY CONSUMPTION – INDUSTRY SECTOR
  • 7.1.6.1.Iron and steel
  • 7.1.6.2.Chemical and petrochemical
  • 7.1.6.3.Non-ferrous metals
  • 7.1.6.4.Non-metallic minerals
  • 7.1.6.5.Transport equipment
  • 7.1.6.6.Machinery
  • 7.1.6.7.Mining and quarrying
  • 7.1.6.8.Food, beverages and tobacco
  • 7.1.6.9.Paper, pulp and printing
  • 7.1.6.10.Wood and wood products
  • 7.1.6.11.Construction
  • 7.1.6.12.Textiles and leather
  • 7.1.6.13.Not elsewhere specified (Industry)
7.1.7.   FINAL ENERGY CONSUMPTION – TRANSPORT SECTOR
  • 7.1.7.1.Domestic aviation
  • 7.1.7.2.Road
  • 7.1.7.3.Rail
  • 7.1.7.4.Domestic navigation
  • 7.1.7.5.Pipeline transport
  • 7.1.7.6.Not elsewhere specified (Transport)
7.1.8   FINAL ENERGY CONSUMPTION – OTHER SECTOR
  • 7.1.8.1.Commercial and public services
  • 7.1.8.2.Households
  • 7.1.8.3.Agriculture
  • 7.1.8.4.Forestry
  • 7.1.8.5.Fishing
  • 7.1.8.6.Not elsewhere specified (Other)

7.2.   Production capacity

Hydrogen production capacity on 31 December of the reference year must be declared with the same level of details as for production (items 7.1.1.1 to 7.1.1.1.8).

7.3.   Units of measurement

Quantities must be declared in TJ (NCV) and production capacity in TJ (NCV) per year.

8. DETAILED STATISTICS ON FINAL ENERGY CONSUMPTION

The following disaggregated data concerning final energy consumption must be declared.

8.1.   List of aggregates

8.1.1.   INDUSTRY SECTOR

To be reported as per the definitions provided in Section 2.6.1 of Annex A.

  • 8.1.1.1.Mining and quarrying
  • 8.1.1.1.1.Mining of metal ores
  • 8.1.1.1.2.Other mining and quarrying
  • 8.1.1.1.3.Mining support service activities
  • 8.1.1.2.Food, beverages and tobacco
  • 8.1.1.2.1.Manufacture of food products
  • 8.1.1.2.2.Manufacture of beverages
  • 8.1.1.2.3.Manufacture of tobacco products
  • 8.1.1.3.Textile and leather
  • 8.1.1.4.Wood and wood products
  • 8.1.1.5.Pulp, paper and printing
  • 8.1.1.5.1.Manufacture of paper and paper products
  • 8.1.1.5.1.1.Manufacture of pulp
  • 8.1.1.5.1.2.Other paper and paper products
  • 8.1.1.5.2Printing and reproduction of recorded media
  • 8.1.1.6.Chemical and petrochemical
  • 8.1.1.6.1.Manufacture of chemicals and chemical products
  • 8.1.1.6.2.Manufacture of basic pharmaceutical products and pharmaceutical preparations
  • 8.1.1.7.Non-metallic minerals
  • 8.1.1.7.1.Manufacture of glass and glass products
  • 8.1.1.7.2.Manufacture of cement, lime and plaster (incl. Clinker)
  • 8.1.1.7.3.Other non-metallic mineral products
  • 8.1.1.8.Iron and steel [Manufacture of basic metals A]
  • 8.1.1.9.Non-ferrous metals industries [Manufacture of basic metals B]
  • 8.1.1.9.1.Aluminium production
  • 8.1.1.9.2.Other non-ferrous metals industries
  • 8.1.1.10.Machinery
  • 8.1.1.10.1.Manufacture of fabricated metal products, except machinery and equipment
  • 8.1.1.10.2.Manufacture of computer, electronic and optical products
  • 8.1.1.10.3.Manufacture of electrical equipment
  • 8.1.1.10.4.Manufacture of machinery and equipment n.e.c.
  • 8.1.1.11.Transport equipment
  • 8.1.1.12.Not elsewhere specified – Industry
  • 8.1.1.12.1.Manufacture of rubber and plastic products
  • 8.1.1.12.2.Manufacture of furniture
  • 8.1.1.12.3.Other manufacturing
8.1.2.   TRANSPORT SECTOR

To be reported as per the definitions provided in Section 2.6.2 of Annex A.

  • 8.1.2.1.Rail
  • 8.1.2.1.1.High-speed rail
  • 8.1.2.1.2.Conventional rail
  • 8.1.2.1.2.1.Passenger transport by conventional rail
  • 8.1.2.1.2.2.Freight transport by conventional rail
  • 8.1.2.1.3.Metro and tram
  • 8.1.2.2.Road
  • 8.1.2.2.1.Heavy-duty vehicles carrying freight
  • 8.1.2.2.2.Collective transport
  • 8.1.2.2.3.Cars and vans
  • 8.1.2.2.4.Other road transport
8.1.3.   COMMERCIAL AND PUBLIC SERVICES SECTOR

To be reported as per the definitions provided in Section 2.6.3.1 of Annex A.

  • 8.1.3.1.Repair and installation of machinery and equipment
  • 8.1.3.2.Water supply; sewerage, waste management and remediation activities
  • 8.1.3.3.Wholesale and retail trade; repair of motor vehicles and motorcycles
  • 8.1.3.3.1.Wholesale trade
  • 8.1.3.3.2.Retail trade
  • 8.1.3.4Warehousing and support activities for transportation
  • 8.1.3.5.Postal and courier activities
  • 8.1.3.6.Accommodation and food service activities
  • 8.1.3.6.1.Accommodation
  • 8.1.3.6.2.Food service activities
  • 8.1.3.7.Information and communication
  • 8.1.3.8.Financial and insurance activities and real estate activities
  • 8.1.3.9.Administrative and support service activities
  • 8.1.3.10.Public administration and defence; compulsory social security
  • 8.1.3.11.Education
  • 8.1.3.12.Human health and social work activities
  • 8.1.3.12.1.Hospital activities
  • 8.1.3.13.Arts, entertainment and recreation
  • 8.1.3.13.1Sports activities
  • 8.1.3.14Activities of extra-territorial organisations and bodies
  • 8.1.3.15.Professional, scientific and technical activities and other services
  • 8.1.3.16Data centres.
  • Only data centres hosted by reporting units (regardless of their NACE code) with a total power capacity of 1 MW or more need to be declared. The first mandatory reporting for this item is reference year 2024.
8.1.4.   HOUSEHOLDS SECTOR

To be reported as per the definitions provided in Section 2.6.3.2 of Annex A.

  • 8.1.4.1.Households: Space heating
  • 8.1.4.2.Households: Space cooling
  • 8.1.4.3.Households: Water heating
  • 8.1.4.4.Households: Cooking
  • 8.1.4.5.Households: Lighting and appliances
  • Only concerns electricity
  • 8.1.4.6.Households: Other end uses

8.2.   Applicable energy products

Unless otherwise specified, this data collection applies to all energy products listed in Annex A.

Eurostat will specify the actual list of energy products for which data covered by point 7 of Annex B should be reported in the reporting template, as a subset of those listed in point 3 of Annex A.

8.3.   Units of measurement

Quantities of solid fossil fuels must be declared in kt (kilo-tonnes).

Quantities of crude oil and petroleum products must be declared in kt (kilo-tonnes).

Quantities of natural gas and manufactured gases (gas works gas, coke oven gas, blast furnace gas, other recovered gases) must be declared by energy content, in TJ GCV (tera-joules based on gross calorific values).

Electricity must be declared in GWh (giga-watt hours).

Quantities of heat must be declared in TJ (tera-joules based on net calorific values).

Quantities of renewables and waste must be declared in TJ NCV (tera-joules based on net calorific value), except for charcoal, biogasoline, bioethanol, bio jet kerosenese, biodiesels, and other liquid biofuels, which must be declared in kt (kilo-tonnes).

Calorific values for solid fossil fuels, crude oil and petroleum products and renewables and waste must be declared in MJ/t (mega-joules per tonne).

Calorific values for natural gas and manufactured gases must be declared in kJ/m3, assuming reference gas conditions (15 °C, 101 325 Pa).

For other energy products for which reporting is required, the applicable units are defined in the relevant chapters of this annex.

8.4.   Deadline for transmission of data:

Data should be submitted by 31 March of the second year following the reported year.

8.5.   Exemptions

Cyprus is exempted from reporting the disaggregated final energy consumption of crude oil and petroleum products (as defined in Section 3.4 of Annex A) for all aggregates covered by Section 8.1.4 of this annex (Households).

9. PRELIMINARY ANNUAL DATA

9.1.   Applicable energy products

This data collection applies to all products described in sections 1.1., 2.1., 3.1., 4.1. and 5.1. of this Annex.

9.2.   List of aggregates

The following list of aggregates must be declared:

  • 9.2.1. For solid fossil fuels and manufactured gases: 1.2.1.1., 1.2.1.2., 1.2.1.6., 1.2.1.7., 1.2.1.8., 1.2.1.9. as defined in Chapter 1 of this annex.
  • 9.2.2. For natural gas: 2.2.1.1., 2.2.1.2., 2.2.1.3., 2.2.1.4., 2.2.1.5., 2.2.1.6., 2.2.9. as defined in Chapter 2 of this annex.
  • 9.2.3. For electricity and heat: gross production by product for all individual products, own use, total of transmission and distribution losses (3.2.3. and 3.2.4.) and 3.2.2.3., 3.2.2.4, 3.2.2.5, 3.2.2.6., 3.2.2.7., 3.2.2.8., 3.2.2.9. as defined in Chapter 3 of this annex.
  • 9.2.4. For oil and petroleum products: 4.2.1.1., 4.2.1.2., 4.2.1.3., 4.2.1.4., 4.2.1.5., 4.2.1.6., 4.2.1.7., 4.2.1.8., 4.2.1.9., 4.2.1.10., 4.2.2.1., 4.2.2.2., 4.2.2.3., 4.2.2.4., 4.2.2.5., 4.2.2.6., 4.2.2.7., 4.2.2.8., 4.2.2.9., 4.2.2.10. as defined in Chapter 4 of this annex.
  • 9.2.5. For renewable energy and energy from waste: 5.2.2.1., 5.2.2.2., 5.2.2.3., 5.2.2.4., 5.2.10.1., 5.2.10.2., 5.2.10.3., 5.2.10.8., 5.2.10.9. as defined in Chapter 5 of this annex.

9.3.   Units of measurement

Quantities must be declared in units defined in Sections 1.3., 2.3., 3.3., 4.3. and 5.3. of this annex.

9.4.   Deadline for transmission of data

Data should be submitted by 31 May of the year following the reported year.

ANNEX C

MONTHLY ENERGY STATISTICS

This annex describes the scope, units, reported period, frequency, deadline and transmission arrangements for the monthly collection of energy statistics.

Annex A provides explanations of terms not explained in this annex.

The following provisions apply to all data collections specified in this Annex:

  • (a) Reported period: The reported period of declared data will be one calendar month.
  • (b) Frequency: Data should be declared on a monthly basis.
  • (c) Transmission format: The transmission format should conform to the relevant interchange standard specified by Eurostat.
  • (d) Transmission method: Data should be submitted or uploaded by electronic means to the Eurostat’s single entry point for data.

1. SOLID FUELS

1.1.   Applicable energy products

This chapter covers the reporting of:

  • 1.1.1.Hard coal
  • 1.1.2.Brown coal
  • 1.1.3.Peat
  • 1.1.4.Oil shale and oil sands
  • 1.1.5.Coke oven coke

1.2.   List of aggregates

  • 1.2.1.The following aggregates must be declared for hard coal:
  • 1.2.1.1.Production
  • 1.2.1.2.Recovered products
  • 1.2.1.3.Imports
  • 1.2.1.4.Imports from outside EU
  • 1.2.1.5.Exports
  • 1.2.1.6.Opening total stocks on national territory
  • These are the quantities held by mines, importers and consumers who import directly.
  • 1.2.1.7.Closing total stocks on national territory
  • These are the quantities held by mines, importers and consumers who import directly.
  • 1.2.1.8.Deliveries to main activity producers
  • 1.2.1.9.Deliveries to coke ovens
  • Excludes hard coal consumed as energy for support operations to coke ovens, to be reported in ‘Deliveries to total industry’.
  • 1.2.1.10.Deliveries to total industry
  • Includes hard coal delivered to the transformation sector (except hard coal reported in ‘Deliveries to main activity producers’ and ‘Deliveries to coke ovens’), the energy sector, and final energy consumption of hard coal in the industry sector.
  • 1.2.1.10.1Deliveries to iron and steel industry
  • Includes hard coal entering blast furnaces as defined in Annex A, Article 2.2.11, and the final energy consumption of hard coal in the Iron and steel sector as defined in Annex A, Article 2.6.1.8.
  • Excludes hard coal consumed as energy for support operations at blast furnaces, to be reported in ‘Deliveries to total industry’.
  • 1.2.1.11.Other deliveries (services, households, etc.).
  • The amount of hard coal delivered to sectors not specifically mentioned.
  • 1.2.2.The following aggregates must be declared for brown coal, peat and oil shale and oil sands:
  • 1.2.2.1.Production
  • 1.2.2.2.Imports
  • 1.2.2.3.Exports
  • 1.2.2.4.Opening total stocks on national territory
  • These are the quantities held by mines, importers and consumers who import directly.
  • 1.2.2.5.Closing total stocks on national territory
  • These are the quantities held by mines, importers and consumers who import directly.
  • 1.2.2.6.For peat, stock changes can be declared instead of opening and closing total stocks.
  • 1.2.2.7.Deliveries to main activity producers
  • 1.2.3.The following aggregates must be declared for coke oven coke:
  • 1.2.3.1.Production
  • 1.2.3.2.Imports
  • 1.2.3.3.Imports from outside the EU
  • 1.2.3.4.Exports
  • 1.2.3.5.Opening total stocks on national territory
  • These are the quantities held by producers, importers and consumers who import directly.
  • 1.2.3.6.Closing total stocks on national territory
  • These are the quantities held by producers, importers and consumers who import directly.
  • 1.2.3.7.Deliveries to iron and steel industry
  • Includes coke oven coke entering blast furnaces as defined in Annex A, Article 2.2.11, and the final energy consumption of coke oven coke in the Iron and steel sector as defined in Annex A, Article 2.6.1.8.
  • Excludes coke oven coke consumed as energy for support operations at blast furnaces.

1.3.   Units of measurement

Reported quantities must be declared in kt (kilo-tonnes).

1.4.   Deadline for transmission of data

Within two calendar months following the reported month.

2. ELECTRICITY

2.1.   Applicable energy products

This chapter covers the reporting of electricity.

2.2.   List of aggregates

The following aggregates must be declared for electricity:

  • 2.2.1.Net electricity production from nuclear plants
  • 2.2.2.Net electricity production from conventional thermal power generation using coal
  • 2.2.3.Net electricity production from conventional thermal power generation using oil
  • 2.2.4.Net electricity production from conventional thermal power generation using gas
  • 2.2.5.Net electricity production from conventional thermal power generation using combustible renewables (such as solid biofuels, biogases, liquid biofuels, renewable municipal waste)
  • 2.2.6.Net electricity production from conventional thermal power generation using other non-renewable combustible fuels (such as non-renewable industrial and non-renewable municipal waste)
  • 2.2.7.Net electricity production from pure hydro plants
  • 2.2.8.Net electricity production from mixed hydro plants
  • 2.2.9.Net electricity production from pure pumped storage hydro plants
  • 2.2.10.Net electricity production from wind installations on shore
  • 2.2.11.Net electricity production from wind installations off shore
  • 2.2.12.Net electricity production from solar PV installations
  • 2.2.13.Net electricity production from solar thermal installations
  • 2.2.14.Net electricity production from geothermal power generation
  • 2.2.15.Net electricity production from other renewable sources (such as tide, wave, ocean and other non-combustible renewable sources)
  • 2.2.16.Net electricity production from non-specified origin
  • 2.2.17.Imports
  • 2.2.17.1.Of which from the EU
  • 2.2.18.Exports
  • 2.2.18.1.Of which to the EU
  • 2.2.19.Electricity used for pumped storage

2.3.   Units of measurement

Reported quantities must be declared in GWh (giga-watt hours).

2.4.   Deadline for transmission of data

Within two calendar months following the reported month.

3. OIL AND PETROLEUM PRODUCTS

3.1.   Applicable energy products

Unless otherwise specified, this data collection applies to all energy products listed in Annex A, Chapter 3.4. OIL (crude oil and petroleum products).

The ‘Other products’ category includes both the quantities that correspond to the definition in Annex A Chapter 3.4 and the quantities of white spirit and SBP, lubricants, bitumen and paraffin waxes; these products should not be declared separately.

3.2.   List of aggregates

The following aggregates must be declared for all energy products listed in the previous paragraph unless otherwise specified.

3.2.1.   SUPPLY OF CRUDE OIL, NGL, REFINERY FEEDSTOCKS, ADDITIVES AND OTHER HYDROCARBONS

Note for additives and biofuels: include here not only already blended volumes, but also all quantities destined for blending.

The following aggregates must be declared for crude oil, NGL, refinery feedstocks, additives/oxygenates, biofuels and other hydrocarbons:

  • 3.2.1.1.Indigenous Production (not applicable for refinery feedstocks and biofuels).
  • 3.2.1.2.Receipts from other sources (not applicable for crude oil, NGL, refinery feedstocks)
  • 3.2.1.3.Backflows
  • Finished or semi-finished products final consumers return to refineries for processing, blending or sale. They are usually by-products of petrochemical manufacturing. Only applicable for refinery feedstocks.
  • 3.2.1.4.Products transferred
  • Imported petroleum products that are reclassified as feedstocks for further processing in the refinery, without delivery to final consumers. Only applicable for refinery feedstocks.
  • 3.2.1.5.Imports
  • 3.2.1.6.Exports
  • Note for import and exports: Includes quantities of crude oil and products imported or exported under processing agreements (i.e. refining on account). Crude oil and NGLs should be reported as coming from the country of ultimate origin; refinery feedstocks and finished products should be reported as coming from the country of last consignment. Includes any gas liquids (e.g. LPG) extracted during the regasification of imported liquefied natural gas and petroleum products imported or exported directly by the petrochemical industry.
  • 3.2.1.7.Direct use
  • 3.2.1.8.Stock changes
  • A stock build is shown as a positive number and a stock draw is shown as a negative number.
  • 3.2.1.9.Observed refinery intake
  • This is defined as the total amount of oil (including Other hydrocarbons and Additives) observed to have entered the refinery process (input to refineries).
  • 3.2.1.10.Refinery losses
  • The difference between observed refinery intake and gross refinery output. Losses may occur during distillation processes due to evaporation. Reported losses are positive. There may be volumetric gains but no gains in mass.
3.2.2.   SUPPLY OF FINISHED PRODUCTS

The following aggregates must be declared for Crude oil, NGL, Refinery gas, Ethane, LPG, Naphtha, Biogasoline, Non-biogasoline, Aviation gasoline, Gasoline type jet fuel, Bio jet kerosene, Non-bio jet Kerosene, Other kerosene, Biodiesels, Non-bio gas/diesel oil, LSFO, HSFO, Petroleum coke, and Other products:

  • 3.2.2.1.Primary product receipts
  • 3.2.2.2.Gross refinery output (not applicable for crude oil and NGL)
  • 3.2.2.3.Recycled products (not applicable for crude oil and NGL)
  • 3.2.2.4.Refinery Fuel (not applicable for crude oil and NGL)
  • Annex A Chapter 2.3. Energy sector – Petroleum refineries; Includes fuels used at the refineries for the production of electricity and heat sold.
  • 3.2.2.5.Imports (not applicable for crude oil, NGL and refinery gas)
  • 3.2.2.6.Exports (not applicable for crude oil, NGL and refinery gas)

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.