Commission Delegated Regulation (EU) 2017/1576 of 26 June 2017 amending Regulation (EU) No 540/2014 of the European Parliament and of the Council as regards the Acoustic Vehicle Alerting System requirements for vehicle EU-type approval (Text with EEA relevance. )

Type Delegated Regulation
Publication 2017-09-19
State In force
Text As published
Department European Commission, GROW
Source EUR-Lex
articles 2

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

Reform history JSON API
19.9.2017 EN Official Journal of the European Union L 239/3

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 540/2014 of the European Parliament and of the Council of 16 April 2014 on the sound level of motor vehicles and of replacement silencing systems, and amending Directive 2007/46/EC and repealing Directive 70/157/EEC [^ntr1-L_2017239EN.01000301-E0001], and in particular the second paragraph of Article 8 and Article 9 thereof,

Whereas:

HAS ADOPTED THIS REGULATION:

Article 1

Amendments to Regulation (EU) No 540/2014

Regulation (EU) No 540/2014 is amended as follows:

‘12.8.   AVAS

12.8.1. Approval number of a type of vehicle with regard to its sound emission pursuant to UNECE Regulation No 138 (1)

or

12.8.2. Complete reference to the test results of AVAS sound emission levels, measured in accordance with Regulation (EU) No 540/2014 (1)’;
  • (b) in Appendix 2, the Addendum is amended as follows:
  • (i) point 3 is replaced by the following:
  • ‘3. AVAS fitted: yes/no (1)’;
  • ‘4. Remarks…’;

Article 2

Entry into force

This Regulation shall enter into force on the third day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 26 June 2017.

For the Commission

The President

Jean-Claude JUNCKER

[^ntr1-L_2017239EN.01000301-E0001]: OJ L 158, 27.5.2014, p. 131.

[^ntr2-L_2017239EN.01000301-E0002]: Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (OJ L 263, 9.10.2007, p. 1).

ANNEX

‘ANNEX VIII

MEASURES CONCERNING THE ACOUSTIC VEHICLE ALERTING SYSTEM (AVAS)

SECTION I

This Annex sets out measures concerning the Acoustic Vehicle Alerting System (AVAS) for hybrid electric and pure electric vehicles.

I.1.   Notwithstanding points 2(a) and (b), the provisions of section II shall apply to an AVAS installed:

I.2.   The provisions of section III shall apply to an AVAS installed:

SECTION II

II.1.   System performance

If AVAS is installed on a vehicle, it shall comply with the requirements referred to in points II.2 and II.3.

II.2.   Operation conditions

The AVAS shall automatically generate a sound in the minimum range of vehicle speed from start up to approximately 20 km/h and during reversing. Where the vehicle is equipped with an internal combustion engine that is in operation within the vehicle speed range defined above, the AVAS shall not generate a sound.

For vehicles having a reversing sound warning device, it is not necessary for the AVAS to generate a sound whilst reversing.

The AVAS shall be fitted with a switch which is easily accessible by the vehicle driver in order to allow engaging and disengaging. Upon restarting the vehicle, AVAS shall default to the switched on position.

The AVAS sound level may be attenuated during periods of vehicle operation.

II.3.   Sound type and volume

SECTION III

III.1.   System performance

The AVAS shall comply with the requirements set out in points III.2 to III.6.

III.2.   Operation conditions

The AVAS shall automatically generate a sound in the minimum range of vehicle speed from start up to approximately 20 km/h and during reversing. Where the vehicle is equipped with an internal combustion engine that is in operation within that vehicle speed range, the AVAS shall not generate a sound.

Vehicles having overall sound levels complying with the requirements in paragraph 6.2.8 of UNECE Regulation No 138 [^ntr1-L_2017239EN.01000502-E0001] with a margin of +3 dB(A), are not required to be equipped with AVAS. The requirements laid down in paragraph 6.2.8 of UNECE Regulation No 138 for one-third octave bands and the requirements laid down in paragraph 6.2.3 of UNECE Regulation No 138 for the frequency shift as defined in paragraph 2.4 of the same UNECE Regulation (“frequency shift”) shall not apply to those vehicles.

For vehicles having a reversing sound warning device, it is not necessary for the AVAS to generate a sound whilst reversing, on condition that the reversing sound of the warning device complies with the requirements laid down in the second subparagraph of paragraph 6.2 and in paragraph 6.2.2 of UNECE Regulation No 138.

The sound generated by the vehicle type submitted for approval shall be measured in accordance with the methods set out in Annex 3 and subparagraphs 6.2.1.3 and 6.2.2.2 of UNECE Regulation No 138.

The AVAS may be fitted with a mechanism to enable the driver to halt the operation of an AVAS (“pause function”), which is easily accessible by the vehicle driver in order to allow engaging and disengaging. Where a pause function is fitted, the AVAS shall default to the switched on position upon restarting of the vehicle.

In addition, the pause function shall comply with the requirements laid down in paragraph 6.2.6 of UNECE Regulation No 138.

The AVAS sound level may be attenuated during periods of vehicle operation. In those cases, the AVAS sound level shall comply with the requirements laid down in paragraph 6.2.8 of UNECE Regulation No 138.

III.3.   Sound type and volume

The following rules shall apply:

III.4.   Test track requirements

Until 30 June 2019, the standard ISO 10844:1994 may be applied as an alternative to the standard ISO 10844:2014 to check compliance of the test track as described in Annex 3, paragraph 2.1.2, of UNECE Regulation No 138.

III.5.   Type-approval certificate

The vehicle manufacturer shall provide, as an attachment to the EU type-approval certificate, any of the following documents:

III.6.   Markings

Each component of the AVAS shall bear the following markings:

The markings shall be indelible and clearly legible.

’

[^ntr1-L_2017239EN.01000502-E0001]: OJ L 9, 13.1.2017, p. 33.

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.