LegalizeCommission Implementing Decision (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (Text with EEA relevance.)
Article 1
The references of the European Assessment Documents for construction products drafted in support of Regulation (EU) No 305/2011 that are listed in Annex to this Decision are hereby published in the Official Journal of the European Union.
Article 2
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX
Reference and title of the European Assessment Document
| 100031-00-1103 | Resettable line-type heat detectors |
| 020002-01-0404 | Balcony and terrace glazing systems without vertical frames (superseding technical specification ‘EAD 020002-00-0404’) |
| 020062-00-1102 | Internal fire resisting and/or smoke control single and double leaf doorsets made of special steel-frame profiles |
| 020094-00-1107 | Battery-powered hold-open systems with optional radio system |
| 020096-00-0405 | Internal doorsets without resistance to fire and smoke control characteristics made of metal profiles |
| 200345-00-0103 | Connectors for tubular sections |
| 280050-00-0605 | Service penetrations for pipes through walls and floors |
| 030016-00-0402 | Corrugated bitumen tiles and sheets |
| 030218-01-0402 | Membranes for use as roof or wall underlays or both (superseding technical specification ‘EAD 030218-00-0402’) |
| 030219-00-0501 | Acoustic spray coating based on a water-based organic binder |
| 030271-00-0605 | Humidity-dependent vapour control layers |
| 030295-00-0605 | Flexible polymer modified mineral thick coatings |
| 030310-00-0605 | Insulating foils as barrier against substances with relevance to indoor air quality |
| 030350-00-0402 | Liquid applied roof waterproofing kits (superseding technical specification ‘ETAG 005’) |
| 030351-00-0402 | Systems of mechanically fastened flexible roof waterproofing sheets (superseding technical specification ‘ETAG 006’) |
| 030352-00-0503 | Liquid applied watertight covering kits for wet room floors and/or walls (superseding technical specification ‘ETAG 022-1’) |
| 030378-00-0605 | Fully bonded, pre-applied flexible sheet for waterproofing |
| 030400-00-0605 | Waterproofing kit based on polymeric membranes for in- and outdoor walls and floors of wet areas and swimming pools |
| 030436-00-0503 | Watertight covering kits based on flexible sheets for wet room floors and/or walls (superseding technical specification ‘ETAG 022-2’) |
| 030437-00-0503 | Watertight covering kits based on inherently watertight boards for wet room floors and/or walls (superseding technical specification ‘ETAG 022-3’) |
| 030588-00-1202 | Three-layer polyethylene-based coating for corrosion protection of steel pipes |
| 030675-00-0107 | Liquid applied bridge deck waterproofing kits |
| 030684-00-0404 | Polyethylene terephthalate-based foils with coating for insulating glass units |
| 030927-00-0404 | Adhesive backed polymeric films for use on glass in buildings |
| 330046-02-0602 | Fastening screws for fastening metal members and sheeting to metal or timber structures (superseding technical specification ‘EAD 330046-01-0602’) |
| 330076-01-0604-v01 | Variant: Metal injection anchors for use in masonry - Anchor groups under fire exposure |
| 330499-02-0601-v01 | Variant: Bonded fasteners and bonded expansion fasteners for use in concrete - Alternative drilling methods, seismic and fire resistance in steel fibre reinforced concrete, variable working life and time-to-failure assessment |
| 332795-01-0601 | Bonded screw fasteners for use in concrete (superseding technical specification ‘EAD 332795-00-0601’) |
| 333530-00-0601 | Stainless-steel point connectors for sandwich walls |
| 350022-02-1107 | Closure systems for conveyor systems (superseding technical specification ‘EAD 350022-01-1107’) |
| 040011-01-1201 | Vacuum insulation panels with factory-applied protection layers’ (superseding technical specification ‘EAD 040011-00-1201’) |
| 040016-01-0404 | Glass fibre mesh for reinforcement of cementitious or cement-based renderings (superseding EAD 040016-00-0404) |
| 040036-00-0501 | Mineral pre-coated ceiling panels |
| 040049-01-0502 | Polyurethane (PU) foam mat or polyester fibre mat to be used for impact sound insulation (superseding technical specification ‘EAD 040049-00-0502’) |
| 040057-01-1201 | Thermal insulation board made of microporous silica (superseding technical specification ‘EAD 040057-00-1201’) |
| 040083-00-0404 | External Thermal Insulation Composite Systems (ETICS) with renderings (superseding technical specification ‘ETAG 004’) |
| 040083-01-0404 | External thermal insulation composite systems with rendering system (superseding technical specification ‘EAD 040083-00-0404’) |
| 040146-00-1201 | Thermal insulation for buildings made of straw bales |
| 040179-00-1201 | Factory-made products of extruded, foamed polyethylene terephthalate for thermal insulation |
| 040369-01-1201 | Insulation made of loose-fill or compound granulated expanded cork or loose-fill granulated natural cork and rubber (superseding technical specification ‘EAD 040369-00-1201’) |
| 040419-00-1201 | Thermal insulation board made of pressed rigid polyurethane foam |
| 040427-00-0404 | Kits for external thermal insulation composite system (ETICS) with mortar as thermal insulation product and renderings or discontinuous claddings as exterior skin |
| 040465-00-0404 | ETICS with renderings on mono-layer or multi-layer wall made of timber |
| 040635-01-1201 | Bound polystyrene bulk material for thermal insulation, sound insulation or both (superseding technical specification ‘EAD 040635-00-1201’) |
| 040685-00-1201 | Factory-made insulation mats made of glass fibres and amorphous silica |
| 040708-00-0402 | Impact sound insulation mat with additional function of rainwater drainage and protection of external waterproofing layers |
| 040729-00-1201 | Thermal insulation made of loose fill mineral wool |
| 040759-00-0404 | External thermal insulation composite system (ETICS) with rendering on boards based on polystyrene cement |
| 040831-00-1201 | Factory-made bonded foam to be used as acoustic and thermal insulation |
| 040868-00-0404 | Rigid polyurethane foam elements for fastening attachment parts to external walls |
| 040914-00-0404 | Veture kits – Prefabricated units for external wall insulation and their fixing devices (superseding technical specification ‘ETAG 017’) |
| 040914-01-0404 | Veture kits – prefabricated units for external wall insulation and their fixing devices (superseding technical specification ‘EAD 040914-00-0404’) |
| 040949-00-1201 | Minerally-bonded boards made of wood chips |
| 041094-00-1201 | Open-cell factory-made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products for building equipment and industrial installations |
| 041125-00-1201 | In-situ loose fill thermal and/or acoustic insulation products made of vegetable fibres to be used in floor constructions without additional load-bearing structures |
| 041369-00-1201 | Insulating boards made of recycled polyurethane to be used as acoustic and thermal insulation |
| 041389-00-1201 | Boards made of agglomerated natural cork for thermal and acoustic insulation |
| 041499-00-1201 | Kit of polyurethane elements for thermal insulation frame around windows made of unplasticized polyvinyl chloride profiles |
| 041559-00-1201 | Thermal insulation and sound absorbing rendering/plastering |
| 041561-00-1201 | In-situ formed thermal insulation made of mineral based foam |
| 041669-00-1201 | Thermal insulation board made of silica- or polyurethane-aerogel on a carrier material |
| 041827-00-0401 | Kits made of insulation boards with protective finishing for inverted roofs |
| 041871-00-1201 | Pre-wall mounting kits for windows and doors |
| 041877-00-0301 | Thermal insulation elements of fibre-reinforced polymer which form a thermal break between structural elements |
| 042051-00-0502 | Natural cork-based mats to be used for thermal and impact sound insulation |
| 042232-00-0503 | Flexible interlayer for the reduction of flanking sound and vibration transmission |
| 042461-00-1201 | Hydrophilic thermal insulation product made of mineral wool for water retention in green roofs and similar applications |
| 050001-01-0301 | Load-bearing thermal insulation elements which form a thermal break between balconies and internal floors (superseding technical specification ‘EAD 050001-00-0301’) |
| 050003-00-0301 | Pot bearings with special internal sealing for increased action effects |
| 050004-01-0301 | Spherical and cylindrical bearings with special sliding material made of ultra-high-molecular-weight polyethylene (superseding technical specification ‘EAD 050004-00-0301’) |
| 050009-01-0301 | Spherical and cylindrical bearings with special sliding material made of fluoropolymer (superseding technical specification ‘EAD 050009-00-0301’) |
| 050019-00-0301 | Dowels for structural joints under static and quasi-static loading (superseding technical specification ETAG 030) |
| 050078-00-0301 | Spherical and cylindrical bearings with special sliding material made of a modified polyamide-polyethylene blend |
| 060009-00-0802 | Kit for system stove - chimney consisting of chimney kit with clay/ceramic flue liner and integrated stove unit |
| 060011-00-0802 | Sootfire resistant chimney kits with clay/ceramic flue liner, working under wet conditions and negative/positive pressure (superseding technical specifications ‘060001-00-0802, 060003-00-0802 and 060008-00-0802’) |
| 060012-00-0802 | Kit consisting of chimney flue liner, made of glass fibres, mineral and organic substances, and ancillaries |
| 060012-01-0802 | Kits consisting of chimney flue liner, made of glass fibres, mineral and organic substances, additional components and ancillaries (superseding technical specification ‘EAD 060012-00-0802’) |
| 060013-00-0802 | Kit for system chimneys with outer wall made of concrete and clay/ceramic flue liner in combination with plastic or metal flue liner and additional duct |
| 060014-00-0802 | Construction product for penetration of walls and floors by components for conveying products of combustion |
| 060015-00-0802 | Chimney kits with clay or ceramic flue liner with increased adjacent thermal insulation or outer walls jointed by polyurethane-based adhesive, or combination of both |
| 070001-02-0504 | Gypsum plasterboards, gypsum boards with fibrous reinforcement and expanded glass boards with fibrous reinforcement for sheathing and lining of building elements (superseding technical specification ‘EAD 070001-01-0504’) |
| 080007-00-0101 | Pre-assembled drainage panels made of gabions and geotextile |
| 080009-00-0301 | Geosynthetic cementitious composite mats and barriers |
| 080013-00-0102 | Rectangular geogrid for the stabilization of unbound granular layers under applied load |
| 090010-00-0404 | Bonded glazing kits and bonding sealants |
| 090018-00-0404 | Reduced thermal bridge wall brackets as part of the subframe of ventilated wall cladding systems or other façade systems |
| 090019-01-0404 | Kits for external wall claddings of expanded glass granulates boards, magnesium oxide boards or other mineral boards with rendering applied on site (superseding technical specifications ‘EAD 090019-00-0404’ and ‘EAD 090119-00-0404’) |
| 090034-01-0404 | Kits composed by subframe and fixings for fastening claddings and external wall elements (superseding technical specification ‘EAD 090034-00-0404’) |
| 090040-00-0404 | Cantilevered structural glass railing/balustrade |
| 090062-01-0404 | Kits for external wall claddings mechanically fixed (superseding technical specification ‘EAD 090062-00-0404’) |
| 090062-01-0404-v01 | Variant: Kits for external wall claddings mechanically fixed – Extension of scope |
| 090074-00-0504 | Glass-ceramic panels for external cladding |
| 090078-00-0504 | Ceramic multilayer slabs for wall claddings and floorings |
| 090097-00-0404 | Kits for external wall claddings glued to the subframe |
| 090119-00-0404 | Kits for external wall cladding of mineral boards with renderings applied in situ |
| 090120-00-0404 | Kits for non-load bearing mineral board external wall systems |
| 090120-01-0404 | Kits for non-load-bearing mineral board external wall systems (superseding technical specification ‘EAD 090120-00-0404’) |
| 090125-00-0404 | Kits for external wall claddings with multilayer composite rigid cladding elements |
| 090125-00-0404-v01 | Variant: Kits for external wall claddings with multilayer composite rigid cladding elements – Extension of scope |
| 090142-00-0404 | Full-bodied sintered stone slabs for use in claddings, floorings, pavings, stairs, rainscreens and curtain walling kits |
| 090232-00-0404 | Kits for self-supporting and interconnected ventilated cavity walls |
| 090240-00-0404 | Wood-based composite panel for facades |
| 090262-00-0404 | Lightweight composite panels with expanded polymer or aluminium honeycomb core |
| 100002-00-1106 | Early Suppression, Fast Response (ESFR), K240 to 480, Upright and Pendent Automatic Fire Sprinkler |
| 100005-00-1106 | Rigid seismic sway brace for fire sprinkler pipe work |
| 100012-00-1106 | Flexible sprinkler hose with end fittings |
| 120011-01-0107 | Flexible plug expansion joints for road bridges with flexible filling based on a synthetic polymer as binder (superseding technical specification ‘EAD 120011-00-0107’) |
| 120017-00-0106 | Wood and metal lighting columns |
| 120093-00-0107 | Flexible asphaltic plug expansion joints for road bridges (superseding technical specification ‘ETAG 032-3’) |
| 120109-00-0107 | Nosing expansion joints for road bridges (superseding technical specification ‘ETAG 032-4’) |
| 120110-00-0107 | Mat expansion joints for road bridges (superseding technical specification ‘ETAG 032-5’) |
| 120111-00-0107 | Cantilever expansion joints for road bridges (superseding technical specification ‘ETAG 032-6’) |
| 120112-00-0107 | Supported expansion joints for road bridges (superseding technical specification ‘ETAG 032-7’) |
| 120113-00-0107 | Modular expansion joints for road bridges (superseding technical specification ‘ETAG 032-8’) |
| 130006-00-0304 | Glued-in rods for timber connections |
| 130018-00-0303 | Wood-concrete composite slab kits |
| 130031-00-0304 | Metal web beams and columns |
| 130082-00-0603 | Façade fixing system - plastic bracket for fixing timber or wood based elements to the substructure |
| 130089-01-0304 | Structural finger-jointed, wet, cold or wet and cold glued solid timber (superseding technical specification ‘EAD 130089-00-0304’) |
| 130118-01-0603 | Screws and threaded rods for use in timber constructions (superseding EAD 130118-00-0603) |
| 130186-00-0603 | Three-dimensional nailing plates (superseding technical specification ‘ETAG 015’) |
| 130287-00-0603 | Profiled aluminium nail for use in timber structures |
| 130308-00-0304 | Structural composite lumber product: Laminated Strand Lumber (LSL) |
| 130320-00-0304 | Glued laminated timber made of solid hardwood |
| 130321-00-0304 | Strength graded and finger jointed structural boards with closed finger base – softwood |
| 130323-00-0304 | Prefabricated wood slab of milled softwood timber to be used as structural elements in buildings |
| 130336-00-0603 | Point connector – Dovetail made of plywood for cross laminated timber |
| 130337-00-0304 | Glued laminated veneer lumber |
| 130348-00-0304 | Laminated segment timber with rectangular cross section made from radially cut logs |
| 130367-00-0304 | Composite wood-based beams and columns (superseding technical specification ‘ETAG 011’) |
| 130484-00-0304 | Tension proof loaded structural finger jointed solid timber which may be processed to glued laminated timber and glued solid timber |
| 130647-00-0304 | Special block glued laminated timber |
| 130661-00-0304 | Glued laminated timber with full cross section finger joint |
| 130740-00-0304 | Glulam strengthened by laminated veneer lumber, glued laminated veneer lumber made of finger-jointed laminations and block-glued glulam made thereof |
| 130767-00-0603 | Wood-based dowel-type fasteners |
| 140022-00-0304 | Prefabricated wood-based loadbearing stressed skin panels (superseding technical specification ‘ETAG 019’) |
| 150001-01-0301 | Belitic calcium sulphoaluminate and calcium sulphoaluminate based cement (superseding technical specification ‘EAD 150001-00-0301’) |
| 150007-01-0301 | Portland cement with pozzolanic filler for tropical use (superseding technical specification ‘150007-00-0301’) |
| 150009-01-0301 | Blast Furnace Cement CEM III/A with assessment of sulfate resistance (SR) and optional with low effective alkali content (LA) and/or low heat of hydration (LH) (superseding technical specification ‘EAD 150009-00-0301’) |
| 150035-00-0301 | Special cements – Carbonation hardening cements requiring a particular curing process |
| 150036-00-0301 | Fluoraluminate rapid setting cement |
| 150052-00-0301 | White high alumina calcium aluminate cement |
| 150059-00-0301 | Natural binder made from ‘Scaglia Rossa’ marl for construction mixtures |
| 150080-00-0301 | Blended cements with high filler content, ground granulated blast-furnace slag or pozzolanic material or both, and clinker |
| 160011-00-0301 | Kit for reinforced concrete members with high strength reinforcing steel but limited tensile utilisation |
| 160012-01-0301 | Headed reinforcing steel bars (superseding technical specification ‘EAD 160012-00-0301’) |
| 160015-00-0102 | Kits for construction of a rock and soil anchor – Kits with thread bars of steel or prestressing steel |
| 160031-00-0301 | Re-bend connection |
| 160055-00-0301 | Lattice girders for the increase of punching resistance in flat slabs and column |
| 160057-00-0301 | L- or Z-shaped metal sheets for the increase of punching shear resistance of flat slabs or footings and ground slabs |
| 160071-00-0102 | Kit for rock and soil anchors using prestressing steel strand |
| 160086-00-0301 | Kits for the strengthening of concrete elements by externally bonded carbon fibre reinforced polymer strips |
| 160086-01-0301 | Kits for the strengthening of concrete elements by externally bonded and near-surface-mounted carbon fibre-reinforced polymer strips (superseding technical specification ‘EAD 160086-00-0301’) |
| 160088-00-0102 | Kits for construction of a rock and soil nail – Kits with hollow bars for a self-drilling nail – Hollow bars of seamless or welded steel tubes |
| 160124-00-0301 | Non-screwable sleeve for mechanical splices by lateral compression of reinforcing bars |
| 160129-00-0301 | Couplers for mechanical splices of reinforcing steel bars |
| 160129-01-0301 | Couplers for mechanical splices of reinforcing steel bars (superseding technical specification ‘EAD 160129-00-0301’) |
| 160202-00-0301 | Stud connectors for anchoring in reinforced concrete members as well as for connecting steel members with reinforced concrete members |
| 160208-00-0301 | S-shaped double headed reinforcement elements for the increase of punching shear resistance of footings and ground slabs |
| 170005-00-0305 | Re-cycled clay masonry units |
| 170006-00-0305 | Aggregate concrete masonry units with specific moisture conversion factor Fm |
| 170010-00-0305 | Polystyrene concrete masonry units and wall kits made from the units |
| 170011-00-0305 | Insulating building element for masonry walls |
| 170012-00-0404 | Building blocks made from bricks and cellular glass core |
| 170018-00-0305 | Thermally-insulating and loadbearing units made of cellular glass |
| 170051-00-0305 | Compressed solid earth blocks with or without lime or cement and wall kits made of these blocks and natural hydraulic lime mortar |
| 180002-00-0706 | Opening and perimeter barriers for flood protection of a building or other structure |
| 180017-00-0704 | Chambers and end caps for surface stormwater detention or retention systems |
| 180020-00-0704 | Waterless odour trap for floor drains |
| 180023-00-0704 | Vertical centrifugal storm water flow regulator |
| 180025-00-0704 | Prefabricated wastewater treatment plants for at least 51 up to 500 PT |
| 180026-00-0704 | Vacuum valves for the use in sewage systems |
| 180037-00-0706 | Backwater valve kits made of plastics for insertion in gravity drainage systems |
| 180040-00-0704 | Sewage separators inside buildings |
| 180041-00-0704 | Retrofit kits for small wastewater treatment plants |
| 190010-00-0502 | Underlays made of granulated polyurethane-foam with or without granulated cork |
| 190013-00-0502 | Thermal and sound insulating dry screed systems with prefabricated flooring elements |
| 190014-00-0503 | Composite floor coverings for use in external and in internal areas |
| 190019-00-0502 | Cement-based floor screeds for internal and external applications |
| 190021-00-0502 | Recycled plastic self-blocking paving units |
| 190022-00-0503 | Jointless, ecological flowing screed made of renewable and sustainable raw materials |
| 190026-00-0502 | Resilient floorings made of ethylene propylene diene-(monomer) and rubber granules |
| 200006-00-0302 | Cable nets with fastening components |
| 200019-01-0102 | Hexagonal woven mesh gabions, mattresses and sack gabions (superseding technical specification ‘EAD 200019-00-0102’) |
| 200050-02-0102 | Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh metallic pre-coated with or without additional organic coating (superseding EAD 200050-01-0102) |
| 200077-00-0103 | Kits for construction of a micropile – Kits with thread bars |
| 200102-00-0302 | Column shoes for structural connections of reinforced concrete columns |
| 200112-00-0301 | Steel spring elements |
| 200116-00-0302 | Structural hollow sections of weathering steel |
| 200126-00-0302 | Corrosion protection systems with tapes wrapped for metallic load-bearing components |
| 200171-00-0103 | Welded gabion kits for use in building foundations |
| 200188-00-1202 | Anti-corrosion paint for steel |
| 200207-00-0302 | Load-bearing external wall and partition wall kit |
| 200379-00-0602 | Fiber ropes with end connectors |
| 210005-00-0505 | Internal partition kits for use as non-loadbearing walls (superseding technical specification ‘ETAG 003’) |
| 210046-00-1201 | Thin metal composite sheet |
| 210046-01-1201 | Thin metal composite sheets (superseding technical specification ‘EAD 210046-00-1201’) |
| 210058-00-0504 | Wood based composite panels for indoor wall or ceiling design or both |
| 210058-00-0504-v01 | Variant: Assessment of components for wood-based composite panels not produced by the manufacturers themselves |
| 210080-00-0505 | Non-load-bearing polyvinyl chloride panels for internal and external walls |
| 210132-00-0504 | Fibreboards for non-structural indoor uses made of recycled cellulosic fibres from industrial cellulosic residues |
| 210134-00-1202 | Soundproofing boards/dry screed and load bearing strips made of corrugated cardboard filled with quartz sand |
| 210138-00-0504 | Boards made from recycled beverage cartons for use in construction |
| 210161-00-0501 | Kits for anti-falling debris ceiling protection composed of welded steel wire mesh and washers |
| 210195-00-0404 | Ultra-thin natural stone veneer sheets for internal and external wall finishes and roof coverings |
| 220009-00-0401 | Kits for green roofs |
| 220010-01-0402 | Flat plastic roofing sheets made of recycled plastic for self-supporting and/or fully supported discontinuous roofing and/or external cladding (superseding EAD 220010-00-0402) |
| 220020-00-0402 | Low bitumen mass shingles, laminated or not, with mineral or synthetic reinforcement |
| 220020-01-0402 | Low-bitumen-mass shingles, laminated or not, with mineral or synthetic reinforcement (superseding technical specification ‘EAD 220020-00-0402’) |
| 220034-00-0607 | Roof tile coupling system |
| 220062-00-0401 | Rooflight with bonded or mechanically fastened cover glass |
| 220078-00-0401 | Kits for green roofs with green roofing elements made of plastic and its fixing devices |
| 220089-00-0401 | Self-supporting translucent roof kits with covering made of plastic sheets (superseding technical specification ‘ETAG 010’) |
| 220089-00-0401-v01 | Self-supporting translucent roof and wall kits with covering made of plastic sheets, including opaque sheets |
| 220106-00-0402 | Thin steel roof and wall cladding panels |
| 220116-00-0401 | Fixed fire-resistant roof window |
| 220119-00-0402 | Self-supporting multi-layer waterproofing and insulating system for pitched roofs |
| 220122-00-0401 | Ceiling windows and ceiling daylighting devices |
| 220150-00-0401 | Roof window with integrated balcony element |
| 220163-00-0401 | Flashings for daylight devices |
| 220169-00-0402 | Fastening screws with welded or cold-formed set screws |
| 220183-00-0402 | Fixing clips and sliding clips for double standing seam roof |
| 230011-00-0106-v01 | Variant: Road marking products – Extension of scope |
| 230064-00-0106 | Road markings – retro-reflective elements |
| 230145-00-0105 | Compound for bitumen and bituminous mixtures made of crumb rubber powder |
| 230145-00-0105-v01 | Variant: Compound for bitumen and bituminous mixtures based on crumb rubber powder – Extension of scope |
| 230158-00-0101 | Stone wool elements used for large-scale water storage in civil works |
| 230172-00-0102 | Polymeric additives for hydraulically bound layers in road construction |
| 230328-00-0108 | Rubber modified bitumen binders |
| 240002-00-0108 | Processed bottom ashes from municipal solid waste incinerators as aggregates for unbound materials for use in road construction |
| 250005-00-0606 | Adhesives for wall claddings |
| 260010-00-0301 | Fibres for concrete – steel fibres recovered from end-of-life tyres |
| 260014-00-0301 | Calcined layer silicate based type II addition |
| 260017-00-0301 | Elastic micro hollow spheres as concrete admixture |
| 260020-00-0301 | Calcium carbonate fine as active addition with catalytic binding performance for concrete |
| 260023-00-0301 | Carbon, glass, basalt and aramid fibre reinforced polymer bars as reinforcement of structural elements |
| 260024-00-0301 | Polymer macro fibres reinforced with alkali resistant glass fibre for the use in concrete |
| 260026-00-0301 | Waterproofing admixture for concrete |
| 260048-00-0301 | Calcium carbonate filler aggregate with additional characteristics |
| 260054-00-0301 | Shrinkage reducing admixture for concrete |
| 260055-00-0301 | Non-metallic expansive mixture based on calcium oxide for concrete |
| 260057-00-0303 | Inorganic fibre grids for reinforcement of cement-, anhydrite- or resin-based screeds |
| 260067-00-0301 | Polymer macro fibres reinforced with basalt fibre for the use in concrete |
| 260100-00-0301 | Cathodic corrosion protection systems made of thermally sprayed zinc anodes combined with polymeric coatings |
| 280004-00-0702 | Flanged balancing valves |
| 280005-00-0702 | Thermostatic radiator valves |
| 280009-00-0802 | Plastics piping kits for the transport system of hot and cold water, made of polyethylene of raised temperature resistance (PE-RT) |
| 280016-00-0602 | Products for installation systems for supporting technical building equipment |
| 280017-00-0109 | Rotationally moulded bunded storage tank made of polyethylene |
| 300002-00-1202 | Glass panels, tiles and mosaic |
| 300008-00-0404 | Thermally curved annealed glass and laminated safety glass made of thermally curved annealed glass |
| 300007-00-0404 | Special mirrors |
| 300010-00-0505 | Special drawn sheet glass |
| 300021-00-0404 | Vacuum insulating glass units |
| 300031-00-0404 | Pressure-equalizing insulating glass units |
| 320014-00-0605 | Joint sealing profile made of ethylene propylene diene monomer for the sealing of joints in tubbing constructions |
| 330008-03-0601 | Anchor channels (superseding technical specification ‘EAD 330008-02-0601’) |
| 330008-04-0601 | Anchor channels (superseding technical specification ‘EAD 330008-03-0601’) |
| 330008-04-0601-v01 | Variant: Anchor channels under fatigue cyclic shear with different lower load level |
| 330008-04-0601-v02 | Variant: Anchor channels for controlled impact screwdrivers |
| 330012-01-0601 | Cast-in anchors with internal threaded socket (superseding technical specification ‘EAD 330012-00-0601’) |
| 330076-01-0604 | Metal injection anchors for use in masonry (superseding technical specification ‘EAD 330076-00-0604’) |
| 330083-03-0601 | Power-actuated fastener in concrete for redundant non-structural applications (superseding technical specification ‘EAD 330083-02-0601’) |
| 330083-04-0601 | Power-actuated fastenings in concrete for redundant non-structural applications (superseding technical specification ‘EAD 330083-03-0601’) |
| 330083-04-0601-v01 | Variant: Seismic performance for the connection of interior non-load-bearing drywall partition walls metal stud to concrete using multiple power actuated fasteners |
| 330087-01-0601 | Systems for post-installed rebar connections with mortar (superseding technical specification ‘EAD 330087-00-0601’) |
| 330196-01-0604-v01 | Screwed-in plastic anchors for fixing of external thermal insulation composite systems with renderings or insulation products on bottom side of ceilings |
| 330232-01-0601 | Mechanical fasteners for use in concrete (superseding technical specification ‘EAD 330232-00-0601’) |
| 330232-01-0601 -v01 | Torque-controlled expansion fasteners for use in concrete with variable working life up to 50 years |
| 330232-02-0601 | Mechanical fasteners for use in concrete (superseding technical specification ‘EAD 330232-01-0601’) |
| 330250-00-0601 | Post-installed fasteners in concrete under fatigue cyclic loading |
| 330250-01-0601 | Post–installed fasteners in concrete under fatigue cyclic loading (superseding technical specification ‘EAD 330250-00-0601’) |
| 330284-00-0604 | Plastic anchors for redundant non-structural systems in concrete and masonry (superseding technical specification ETAG 020) |
| 330284-00-0604-v01 | Variant: Plastic anchors for redundant non-structural systems for use in concrete and masonry under fire exposure |
| 330284-00-0604-v02 | Variant: Plastic anchors for redundant non-structural systems in concrete and masonry, and for fixing façade claddings through angle brackets under seismic actions in concrete and masonry |
| 330387-00-0601 | Glass fibre-reinforced plastic connectors for use in sandwich and element walls made of concrete |
| 330424-00-0604 | Screw anchors for autoclaved aerated concrete and lightweight aggregate concrete |
| 330460-00-0604 | Screw anchors for use in masonry |
| 330499-01-0601 | Bonded fasteners for use in concrete (superseding technical specification ‘ETAG 001-5’ and EAD 330499-00-0601) |
| 330499-02-0601 | Bonded fastener and bonded expansion fasteners for use in concrete (superseding technical specification ‘EAD 330499-01-0601’) |
| 330667-01-0602 | Mounting channels (superseding technical specification ‘EAD 330667-00-0602’) |
| 330924-01-0601 | Cast-in anchor bolts (superseding technical specification ‘EAD 330924-00-0601’) |
| 330924-01-0601-v01 | Variant: Cast-in anchor bolts under fatigue or seismic actions |
| 330965-01-0601 | Powder-actuated fastener for the fixing of ETICS in concrete (superseding technical specification ‘EAD 330965-00-0601’) |
| 331433-00-0601 | Injected anchor for thermal insulation boards |
| 331531-00-0602 | High-strength structural bolting assemblies for hydraulically operated, friction-less and torsion-free tightening |
| 331565-00-0602 | Wedge lock washers for structural bolting assemblies |
| 331668-00-0601 | Glass, basalt, aramid, carbon, PBO (polyparaphenylene benzobisoxazole) and steel rovings for fibre-reinforced anchor spikes |
| 331846-00-0603 | Anchor devices for fastening personal fall protection systems to timber substructures |
| 331846-01-0603 | Anchor devices for fastening personal fall protection systems to timber substructures (superseding technical specification ‘EAD 331846-00-0603’) |
| 331924-00-0602 | Decking fixing assemblies |
| 331985-00-0604 | Distance-fixing systems for use in concrete and masonry |
| 332001-00-0602 | Clamping system for connection of precast concrete members |
| 332001-01-0602 | Clamping kits for connection of precast concrete members (superseding technical specification ‘EAD 332001-00-0602’) |
| 332229-00-0602 | Stainless steel point fastener for glass claddings |
| 332277-00-0601 | Fastener for push-pull props for precast wall/column elements |
| 332347-00-0601 | Connector for strengthening of existing concrete structures by concrete overlay |
| 332347-00-0601-v01 | Connector for strengthening of existing concrete structures by concrete overlay: behaviour under seismic action |
| 332402-00-0601 | Post-installed reinforcing bar (rebar) connections with improved bond-splitting behaviour |
| 332589-00-0601 | Wire loop system for the connection of precast and in-situ concrete elements |
| 332589-01-0601 | Wire loop system for the connection of precast and in-situ concrete elements (superseding technical specification ‘EAD 332589-00-0601’) |
| 332699-00-0601 | Kits for connection of precast concrete façade elements to concrete structures based on anchor channels |
| 332700-00-0601 | Concrete screws for fastening sandwich panels |
| 332707-00-0602 | Support fixing assemblies |
| 332795-00-0601 | Bonded screw fasteners for use in concrete |
| 333037-00-0602 | Threaded studs for connection of materials to structural steel and aluminium members |
| 333220-00-0601 | Pre-installed anchor for fastening concrete façade elements |
| 333256-00-0603 | Fasteners for fixing external thermal insulation composite systems on timber constructions |
| 333915-00-0601 | Point fastening kits for roof panels |
| 334812-00-0602 | Anchor devices for fastening personal fall protection systems to steel or aluminium trapezoidal sheeting substructures |
| 340024-00-0103 | Permanent insulating shuttering kits for whole buildings |
| 340109-00-0106 | Flexible avalanche protection kit |
| 340179-00-0203 | Structural panelled building kit |
| 340225-00-1109 | Plastic chamber systems for underground network access applications installed below manhole tops |
| 340275-00-0104 | Externally-bonded composite systems with inorganic matrix for strengthening of concrete and masonry structures |
| 340282-00-0303 | Load-bearing sandwich panels with foam or polymeric core and skins of structural cement bonded particle boards |
| 340287-00-0203 | Reinforced high density EPS structural panel system for building units |
| 340292-00-0303 | Earthquake-resistant kits composed of steel-concrete composite beams, columns and beam-column joints |
| 340297-00-0203 | Dry masonry construction system with vertical elements |
| 340308-00-0203 | Timber building kits (superseding technical specification ‘ETAG 007’) |
| 340309-00-0305 | Non load-bearing permanent shuttering kits/systems based on hollow blocks or panels of insulating materials and sometimes concrete (superseding technical specification ‘ETAG 009’) |
| 340309-00-0305-v01 | Variant: Non-load-bearing permanent shuttering kits or systems based on hollow blocks or panels of insulating materials and sometimes concrete: hollow blocks resistant to seismic actions |
| 340351-00-0104 | Fibre-reinforced polymer kits made of a pultruded carbon fibre laminate and an epoxy adhesive |
| 340352-00-0104 | Fibre-reinforced polymer kits made of a carbon or glass fabric and an epoxy resin |
| 340376-00-0111 | Prefabricated soil and water barrier systems made of polyvinyl chloride |
| 340383-00-0203 | Modular pre-fabricated cemetery construction structure |
| 340392-00-0104 | CRM (Composite Reinforced Mortar) Systems for strengthening concrete and masonry structures |
| 340451-00-0104 | Kits made of alkali-resistant glass fibre mesh, connectors and mortar for strengthening of masonry and reinforced concrete elements by external bonding |
| 340452-00-0204 | Building kit based on massive panels with metal frame structure |
| 340452-00-0204-v01 | Variant: Building kits based on massive panels with metal frame structure - Extension of scope |
| 340503-00-1106 | Prefabricated fire-resistant building units |
| 340549-00-0204 | Structural steel composite wall panels for building systems |
| 340556-00-0506 | Attic stair kits |
| 340739-00-0106 | High load-bearing and low load-bearing single anchor earth retaining structures made of steel |
| 350003-01-1109 | Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of steel sheet with an intumescent coating or lining) and accessories (superseding technical specification ‘EAD 350003-00-1109’) |
| 350454-00-1104-v01 | Combined penetration seals for fire dampers |
| 350865-00-1106 | Fire retardant products (superseding technical specification ‘ETAG 028’) |
| 351141-00-1104 | Fire-resistant reactive air transfer grilles |
| 351281-00-1104 | Caps with intumescent inlay for recessed luminaires in fire-resistant suspended ceilings |
| 360001-01-0803 | Ventilation system made of mineral wool with facings on outside and inside (superseding technical specification ‘EAD 360001-00-0803’) |
| 360001-02-0803 | Ventilation systems made of mineral wool with facings on outside and inside (superseding technical specification ‘EAD 360001-01-0803’) |
| 360027-00-0101 | Drainage system used in underground rock caverns |
| 360032-00-0803 | Liner, made of glass fibres, mineral and organic substances used for relining of ducts for ventilation purposes |
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.