Legalize
Legalize / European Union / Implementing Decision

Commission Implementing Decision (EU) 2019/1616 of 27 September 2019 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council

Type Implementing Decision
Publication 2019-09-30
Last updated 2024-04-03
State Repealed
Department European Commission, GROW
Source EUR-Lex
articles 3
Reform history JSON API

Article 1

The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.

Article 2

The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.

Article 3

This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.

ANNEX I

No Reference of the standard
1. EN 1562:2019 Founding — Malleable cast irons
2. EN 1563:2018 Founding — Spheroidal graphite cast irons
3. EN ISO 4126-2:2019 Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices (ISO 4126-2:2018)
4. EN 12516-1:2014+A1:2018 Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells
5. EN 12516-4:2014+A1:2018 Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
6. EN 13136:2013+A1:2018 Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation
————— —————
7a. EN 13445-2:2021 Unfired pressure vessels – Part 2: Materials
————— —————
8a. EN 13445-3:2021 Unfired pressure vessels – Part 3: Design
————— —————
9a. EN 13445-5:2021 Unfired pressure vessels – Part 5: Inspection and testing
————— —————
10a. EN 13445-6:2021 Unfired pressure vessels – Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
————— —————
11a. EN 13480-2:2017 Metallic industrial piping - Part 2: Materials EN 13480-2:2017/A3:2018 EN 13480-2:2017/A1:2018 EN 13480-2:2017/A2:2018 EN 13480-2:2017/A7:2020 EN 13480-2:2017/A8:2021
————— —————
12a. EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing EN 13480-5:2017/A1:2019 EN 13480-5:2017/A2:2021
13. EN ISO 15494:2018 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system (ISO 15494:2015)
14. EN ISO 21028-2:2018 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between – 80 degrees C and – 20 degrees C (ISO 21028-2:2018)
15. EN ISO 4126-1:2013 Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013) EN ISO 4126-1:2013/A2:2019
16. EN 10217-1:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
17. EN 10217-2:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
18. EN 10217-3:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
19. EN 10217-4:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
20. EN 10217-5:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
21. EN 10217-6:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
22. EN 13480-1:2017 Metallic industrial piping – Part 1: General EN 13480-1:2017/A1:2019
23. EN 13480-6:2017 Metallic industrial piping – Part 6: Additional requirements for buried piping EN 13480-6:2017/A1:2019
24. EN ISO 4126-3:2020 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020)
25. EN 12542:2020 LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 - Design and manufacture
26. EN 12735-1:2020 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
27. EN 12953-5:2020 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
28. EN 13175:2019+A1:2020 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
————— —————
29a. EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation EN 13480-3:2017/A3:2020 EN 13480-3:2017/A1:2021 EN 13480-3:2017/A2:2020 EN 13480-3:2017/A4:2021
30. EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
31. EN 14276-2:2020 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
32. EN ISO 15620:2019 Welding - Friction welding of metallic materials (ISO 15620:2019)
33. EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) EN ISO 16135:2006/A1:2019
34. EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) EN ISO 16136:2006/A1:2019
35. EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) EN ISO 16137:2006/A1:2019
36. EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) EN ISO 16138:2006/A1:2019
37. EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) EN ISO 16139:2006/A1:2019
38. EN 16767:2020 Industrial valves - Metallic check valves
39. EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) EN ISO 21787:2006/A1:2019
40. EN 1515-4:2021 Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
41. EN 14222:2021 Stainless steel steam boilers
42. EN 10216-5:2021 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 5: Stainless steel tubes
43. EN 10217-7:2021 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 7: Stainless steel tubes
44. EN 10222-2:2017+A1:2021 Steel forgings for pressure purposes – Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
45. EN 10222-4:2017+A1:2021 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength
46. EN 13445-1:2021 Unfired pressure vessels – Part 1: General
47. EN 13445-4:2021 Unfired pressure vessels – Part 4: Fabrication
48. EN 13445-8:2021 Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
49. EN 13445-10:2021 Unfired pressure vessels – Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
50. EN 17278:2021 Natural gas vehicles – Vehicle fuelling appliances
51. EN 3-8:2021 Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
52. EN ISO 9712:2022 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2021)
53. EN 10253-2:2021 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
54. EN 12516-2:2014+A1:2021 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
55. EN 12952-2:2021 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
56. EN 12952-5:2021 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
57. EN 12952-6:2021 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler
58. EN 12952-10:2021 Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices against excessive pressure
59. EN 13121-1:2021 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria
60. EN 14917:2021 Metal bellows expansion joints for pressure applications
61. EN ISO 21922:2021 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)

ANNEX II

No Reference of the standard Date of withdrawal
1. EN 13445-2:2014 Unfired pressure vessels — Part 2: Materials EN 13445-2:2014/A1:2016 EN 13445-2:2014/A2:2018 30 September 2019
2. EN 13445-3:2014 Unfired pressure vessels — Part 3: Design EN 13445-3:2014/A1:2015 EN 13445-3:2014/A2:2016 EN 13445-3:2014/A3:2017 EN 13445-3:2014/A4:2018 30 September 2019
3. EN 13445-5:2014 Unfired pressure vessels — Part 5: Inspection and testing 30 September 2019
4. EN 13445-6:2014 Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron 30 September 2019
5. EN 13480-2:2017 Metallic industrial piping — Part 2: Materials 30 September 2019
6. EN 13480-5:2017 Metallic industrial piping — Part 5: Inspection and testing 30 September 2019
7. EN 1252-2:2001 Cryogenic vessels — Materials — Part 2: Toughness requirements for temperatures between – 80 °C and – 20 °C 30 March 2020
8. EN 1562:2012 Founding — Malleable cast irons 30 March 2020
9. EN 1563:2011 Founding — Spheroidal graphite cast irons 30 March 2020
10. EN 12516-1:2014 Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells 30 March 2020
11. EN 12516-4:2014 Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel 30 March 2020
12. EN 13136:2013 Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation 30 March 2020
13. EN 10217-1:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature properties EN 10217-1:2002/A1:2005 20 April 2021
14. EN 10217-2:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties EN 10217-2:2002/A1:2005 20 April 2021
15. EN 10217-3:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubes EN 10217-3:2002/A1:2005 20 April 2021
16. EN 10217-4:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties EN 10217-4:2002/A1:2005 20 April 2021
17. EN 10217-5:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties EN 10217-5:2002/A1:2005 20 April 2021
18. EN 10217-6:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties EN 10217-6:2002/A1:2005 20 April 2021
19. EN 13480-1:2017 Metallic industrial piping – Part 1: General 20 April 2020
20. EN 13480-6:2017 Metallic industrial piping – Part 6: Additional requirements for buried piping 20 April 2020
21. EN ISO 4126-1:2013 Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013) 20 April 2020
22. EN 12542:2010 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 - Design and manufacture 10 August 2022
23. EN 12735-1:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems 10 August 2022
24. EN 12953-5:2002 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler 10 August 2022
25. EN 13175:2014 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings 10 August 2022
26. EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation 10 August 2022
27. EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements 10 August 2022
28. EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements 10 August 2022
29. EN 16767:2016 Industrial valves - Steel and cast iron check valves 10 August 2022
30. EN ISO 15620:2000 Welding - Friction welding of metallic materials (ISO 15620:2000) 10 August 2022
31. EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) 10 August 2022
32. EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) 10 August 2022
33. EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) 10 August 2022
34. EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) 10 August 2022
35. EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) 10 August 2022
36. EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) 10 August 2022
37. EN ISO 4126-3:2006 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) 10 August 2022
38. EN 1515-4:2009 Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC 12 April 2023
39. EN 14222:2003 Stainless steel shell boilers 12 April 2023
40. EN 10216-5:2013 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 5: Stainless steel tubes 21 June 2023
41. EN 10217-7:2014 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 7: Stainless steel tubes 21 June 2023
42. EN 10222-2:2017 Steel forgings for pressure purposes – Part 2: Ferritic and martensitic steels with specified elevated temperatures properties 21 June 2023
43. EN 10222-4:2017 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength 21 June 2023
44. EN 13445-1:2014 Unfired pressure vessels – Part 1: General EN 13445-1:2014/A1:2014 21 June 2023
45. EN 13445-4:2014 Unfired pressure vessels – Part 4: Fabrication 21 June 2023
46. EN 13445-8:2014 Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys EN 13445-8:2014/A1:2014 21 June 2023
47. EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements 3.4.2024
48. EN 12284:2003 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking 3.4.2024
49. EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells 3.4.2024
50. EN 12952-10:2002 Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure 3.4.2024
51. EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories 3.4.2024
52. EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler 3.4.2024
53. EN 12952-6:2011 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler 3.4.2024
54. EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions 3.4.2024
55. EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications 3.4.2024
56. EN 3-8:2006 Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar EN 3-8:2006/AC:2007 3.4.2024
57. EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) 3.4.2024

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.