LegalizeCommission Implementing Regulation (EU) 2024/2651 of 10 October 2024 granting a Union authorisation for the biocidal product family Taski-Room Care-Suma Family based on Lactic Acid in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses Common name: Enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data |
| Field(s) of use | indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). |
| Application method(s) | Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. |
| Application rate(s) and frequency | Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 4% v/v (4 ml product, add water up to 100 ml). Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes |
| Category(ies) of users | professional |
| Pack sizes and packaging material | Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide) |
4.1.1. Use-specific instructions for use
Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.2. Use description
Table 2.
Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport)
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data |
| Field(s) of use | indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). |
| Application method(s) | Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. |
| Application rate(s) and frequency | Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 4% v/v (4 ml product, add water up to 100 ml). Number and timing of application: Contact time: 15 minutes |
| Category(ies) of users | professional |
| Pack sizes and packaging material | Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0.8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5: 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - poylamide). |
4.2.1. Use-specific instructions for use
Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.2.2. Use-specific risk mitigation measures
See general directions for use.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.3. Use description
Table 3.
Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data |
| Field(s) of use | indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). |
| Application method(s) | Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. |
| Application rate(s) and frequency | Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2). Dilute the product to 4% v/v (4 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes |
| Category(ies) of users | professional |
| Pack sizes and packaging material | Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). |
4.3.1. Use-specific instructions for use
Remove gross soiling and pre-clean the surface before applying the product.
Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required.Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.3.2. Use-specific risk mitigation measures
See general directions for use.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.4. Use description
Table 4.
Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area
| Product type | PT03: Veterinary hygiene |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data |
| Field(s) of use | indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area. |
| Application method(s) | Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. |
| Application rate(s) and frequency | Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 6% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2 or 25 ml/m2 for 30 minutes). Dilute the product to 6% v/v (6 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C |
| Category(ies) of users | professional |
| Pack sizes and packaging material | Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). |
4.4.1. Use-specific instructions for use
Remove gross soiling and pre-clean the surface before applying the product.
Dilute the product with potable water to 6,0% (6 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.4.2. Use-specific risk mitigation measures
See general directions for use.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.5. Use description
Table 5.
Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area)
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data |
| Field(s) of use | indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens. |
| Application method(s) | Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. |
| Application rate(s) and frequency | Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 6% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilute the product to 6% v/v (6 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes |
| Category(ies) of users | professional |
| Pack sizes and packaging material | Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20.0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). |
4.5.1. Use-specific instructions for use
Dilute the product with potable water to 6,0% (6 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.5.2. Use-specific risk mitigation measures
See general directions for use.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3
5.1. Instructions for use
Comply with the instructions for use.
Inform the authorisation holder if the treatment is ineffective.
5.2. Risk mitigation measures
Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
Do not breathe vapour.
Avoid contact with eyes and skin.
Avoid splashes and spills during mixing and loading (dilution).
Wash hands after handling.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor.
IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance.
Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance.
5.4. Instructions for safe disposal of the product and its packaging
Dispose of unused product, its packaging and all other waste in accordance with local regulations.
Do not discharge unused product on the ground, into water sources, into pipes nor down the drains.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Store in original container tightly closed. Store protected from light.
Do not store above 40 °C.
Shelf- life: 2 years.
6. OTHER INFORMATION
The full titles of the EN standards referenced in section 5.2 ‘Risk mitigation measures’ are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]).
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3
7.1. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | ANDY MultiPower Plus Professional | ANDY MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ANDYSAN MultiPower Plus Professional | ANDYSAN MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | CIF MultiPower Plus Professional | CIF MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | DOMESTOS MultiPower Plus Professional | DOMESTOS MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | FLORASZEPT MultiPower Plus Professional | FLORASZEPT MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | GLORIX MultiPower Plus Professional | GLORIX MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | JIF MultiPower Plus Professional | JIF MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KLINEX MultiPower Plus Professional | KLINEX MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | LIFEBUOY MultiPower Plus Professional | LIFEBUOY MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | LYSOFORM MultiPower Plus Professional | LYSOFORM MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Room Care R9.1 Des-Plus | Room Care R9.1 Des-Plus | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SAVO MultiPower Plus Professional | SAVO MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SUPERANDY MultiPower Plus Professional | SUPERANDY MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | VISS MultiPower Plus Professional | VISS MultiPower Plus Professional | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0031644-0007 1-3 | EU-0031644-0007 1-3 | EU-0031644-0007 1-3 | EU-0031644-0007 1-3 | EU-0031644-0007 1-3 |
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| L-(+)-lactic acid | Active substance | Active substance | 79-33-4 | 79-33-4 | 201-196-2 | 8,8 % (w/w) | |
| Methanesulfonic acid | Non-active substance | Non-active substance | 75-75-2 | 75-75-2 | 200-898-6 | 2,56 % (w/w) | |
| Alkyl ether carboxylic acid | Non-active substance | Non-active substance | 53563-70-5 | 53563-70-5 | 4,5 % (w/w) |
7.2. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | Room Care R9 Des-Plus | Room Care R9 Des-Plus | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0031644-0008 1-3 | EU-0031644-0008 1-3 | EU-0031644-0008 1-3 | EU-0031644-0008 1-3 | EU-0031644-0008 1-3 |
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| L-(+)-lactic acid | Active substance | Active substance | 79-33-4 | 79-33-4 | 201-196-2 | 8,8 % (w/w) | |
| Methanesulfonic acid | Non-active substance | Non-active substance | 75-75-2 | 75-75-2 | 200-898-6 | 2,56 % (w/w) | |
| Alkyl ether carboxylic acid | Non-active substance | Non-active substance | 53563-70-5 | 53563-70-5 | 4,5 % (w/w) |
1. META SPC 4 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 4 identifier
| Identifier | Meta SPC: Meta SPC 4 |
1.2. Suffix to the authorisation number
| Number | 1-4 |
1.3. Product type(s)
| Product type(s) | PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
2. META SPC 4 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 4
| Common name | IUPAC name | Function | CAS number | EC number | Content (%) |
|---|---|---|---|---|---|
| L-(+)-lactic acid | Active substance | 79-33-4 | 201-196-2 | 0,352 - 0,352 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 4
| Formulation type(s) | AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4
| Hazard statements | |
| Precautionary statements |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: enveloped viruses Common name: enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data |
| Field(s) of use | indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). |
| Application method(s) | Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. |
| Application rate(s) and frequency | Application Rate: Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). ready to use products Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes |
| Category(ies) of users | professional |
| Pack sizes and packaging material | Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide) |
4.1.1. Use-specific instructions for use
Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in the product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.2. Use description
Table 2.
Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport)
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data |
| Field(s) of use | indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). |
| Application method(s) | Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. |
| Application rate(s) and frequency | Application Rate: Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Ready to use products Number and timing of application: Contact time: 15 minutes |
| Category(ies) of users | professional |
| Pack sizes and packaging material | Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). |
4.2.1. Use-specific instructions for use
Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in the product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.2.2. Use-specific risk mitigation measures
See general directions for use.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.3. Use description
Table 3.
Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data |
| Field(s) of use | indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). |
| Application method(s) | Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. |
| Application rate(s) and frequency | Application Rate: Apply the product by fully wetting all surface (apply approx. 10 sprays /m2 or 13 ml/m2). Ready to use product Number and timing of application: Contact time: 5 minutes |
| Category(ies) of users | professional |
| Pack sizes and packaging material | Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). |
4.3.1. Use-specific instructions for use
Remove gross soiling and pre-clean the surface before applying the product.
Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.3.2. Use-specific risk mitigation measures
See general directions for use.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4
5.1. Instructions for use
Comply with the instructions for use.
Inform the authorisation holder if the treatment is ineffective.
5.2. Risk mitigation measures
Not relevant.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
If medical advice is needed, have product container or label at hand
IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.
IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.
IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.
IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.
5.4. Instructions for safe disposal of the product and its packaging
Dispose of unused product, its packaging and all other waste in accordance with local regulations.
Do not discharge unused product on the ground, into water sources, into pipes nor down the drains.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Store in original container tightly closed. Store protected from light.
Do not store above 40 °C.
Shelf- life: 2 years.
6. OTHER INFORMATION
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4
7.1. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | Room Care R9 RTU | Room Care R9 RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Room Care R9.1 Des | Room Care R9.1 Des | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0031644-0009 1-4 | EU-0031644-0009 1-4 | EU-0031644-0009 1-4 | EU-0031644-0009 1-4 | EU-0031644-0009 1-4 |
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| L-(+)-lactic acid | Active substance | Active substance | 79-33-4 | 79-33-4 | 201-196-2 | 0,352 % (w/w) |
7.2. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | Taski Sani 4 in 1 Plus Spray | Taski Sani 4 in 1 Plus Spray | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0031644-0010 1-4 | EU-0031644-0010 1-4 | EU-0031644-0010 1-4 | EU-0031644-0010 1-4 | EU-0031644-0010 1-4 |
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| L-(+)-lactic acid | Active substance | Active substance | 79-33-4 | 79-33-4 | 201-196-2 | 0,352 % (w/w) |
7.3. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | ANDY MultiPower Professional | ANDY MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ANDYSAN MultiPower Professional | ANDYSAN MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | CIF MultiPower Professional | CIF MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Cif 4in1 Cleaner Disinfectant | Cif 4in1 Cleaner Disinfectant | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | DOMESTOS MultiPower Professional | DOMESTOS MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Domestos 4in1 Cleaner Disinfectant | Domestos 4in1 Cleaner Disinfectant | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | FLORASZEPT MultiPower Professional | FLORASZEPT MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | GLORIX MultiPower Professional | GLORIX MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Glorix 4in1 Cleaner Disinfectant | Glorix 4in1 Cleaner Disinfectant | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | JIF MultiPower Professional | JIF MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KLINEX MultiPower Professional | KLINEX MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Klinex 4in1 Cleaner Disinfectant | Klinex 4in1 Cleaner Disinfectant | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | LIFEBUOY MultiPower Professional | LIFEBUOY MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | LYSOFORM MultiPower Professional | LYSOFORM MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Lysoform 4in1 Cleaner Disinfectant | Lysoform 4in1 Cleaner Disinfectant | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Metro Prof. 4 in 1 Plus RTU | Metro Prof. 4 in 1 Plus RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | OPTIMAX 4 in 1 Plus RTU | OPTIMAX 4 in 1 Plus RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SAVO MultiPower Professional | SAVO MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Suma San 4in1 D10.7 Spray | Suma San 4in1 D10.7 Spray | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SUPERANDY MultiPower Professional | SUPERANDY MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Taski Sani 4 in 1 Plus RTU | Taski Sani 4 in 1 Plus RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | VISS MultiPower Professional | VISS MultiPower Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Viss 4in1 Cleaner Disinfectant | Viss 4in1 Cleaner Disinfectant | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | We Clean 4 in 1 Plus RTU | We Clean 4 in 1 Plus RTU | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0031644-0011 1-4 | EU-0031644-0011 1-4 | EU-0031644-0011 1-4 | EU-0031644-0011 1-4 | EU-0031644-0011 1-4 |
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| L-(+)-lactic acid | Active substance | Active substance | 79-33-4 | 79-33-4 | 201-196-2 | 0,352 % (w/w) |
7.4. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | ANDY MultiPower FREE Professional | ANDY MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ANDY MultiPower ZERO Professional | ANDY MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ANDYSAN MultiPower FREE Professional | ANDYSAN MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ANDYSAN MultiPower ZERO Professional | ANDYSAN MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | CIF MultiPower FREE Professional | CIF MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | CIF MultiPower ZERO Professional | CIF MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Divosan Freed RTU | Divosan Freed RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | DOMESTOS MultiPower FREE Professional | DOMESTOS MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | DOMESTOS MultiPower ZERO Professional | DOMESTOS MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | FLORASZEPT MultiPower FREE Professional | FLORASZEPT MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | FLORASZEPT MultiPower ZERO Professional | FLORASZEPT MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | GLORIX MultiPower FREE Professional | GLORIX MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | GLORIX MultiPower ZERO Professional | GLORIX MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | JIF MultiPower FREE Professional | JIF MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | JIF MultiPower ZERO Professional | JIF MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KLINEX MultiPower FREE Professional | KLINEX MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KLINEX MultiPower ZERO Professional | KLINEX MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | LIFEBUOY MultiPower FREE Professional | LIFEBUOY MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | LIFEBUOY MultiPower ZERO Professional | LIFEBUOY MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | LYSOFORM MultiPower FREE Professional | LYSOFORM MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | LYSOFORM MultiPower ZERO Professional | LYSOFORM MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SAVO MultiPower FREE Professional | SAVO MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SAVO MultiPower ZERO Professional | SAVO MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SUPERANDY MultiPower FREE Professional | SUPERANDY MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SUPERANDY MultiPower ZERO Professional | SUPERANDY MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Sanitizer A-RTU | Sure Sanitizer A-RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Sanitizer Spray | Sure Sanitizer Spray | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | TASKI Sani 4 in 1 FREE | TASKI Sani 4 in 1 FREE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | TASKI Sani 4 in 1 ZERO | TASKI Sani 4 in 1 ZERO | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | VISS MultiPower FREE Professional | VISS MultiPower FREE Professional | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | VISS MultiPower ZERO Professional | VISS MultiPower ZERO Professional | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0031644-0012 1-4 | EU-0031644-0012 1-4 | EU-0031644-0012 1-4 | EU-0031644-0012 1-4 | EU-0031644-0012 1-4 |
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| L-(+)-lactic acid | Active substance | Active substance | 79-33-4 | 79-33-4 | 201-196-2 | 0,352 % (w/w) |
7.5. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Sanitizer B-RTU | Sure Sanitizer B-RTU | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0031644-0013 1-4 | EU-0031644-0013 1-4 | EU-0031644-0013 1-4 | EU-0031644-0013 1-4 | EU-0031644-0013 1-4 |
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| L-(+)-lactic acid | Active substance | Active substance | 79-33-4 | 79-33-4 | 201-196-2 | 0,352 % (w/w) |
7.6. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Sanitizer C-RTU | Sure Sanitizer C-RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Sanitizer 4in1 Spray | Sure Sanitizer 4in1 Spray | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Sanitizer 4in1 Fresh Spray | Sure Sanitizer 4in1 Fresh Spray | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0031644-0014 1-4 | EU-0031644-0014 1-4 | EU-0031644-0014 1-4 | EU-0031644-0014 1-4 | EU-0031644-0014 1-4 |
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| L-(+)-lactic acid | Active substance | Active substance | 79-33-4 | 79-33-4 | 201-196-2 | 0,352 % (w/w) |
7.7. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Freshener RTU | Sure Freshener RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Freshener 7X RTU | Sure Freshener 7X RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Sanitiser RTU | Sure Sanitiser RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sure Sanitiser 2X RTU | Sure Sanitiser 2X RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | TASKI Sani 4 in 1 Freshener | TASKI Sani 4 in 1 Freshener | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Taski Sani 4 in 1 Freshener | Taski Sani 4 in 1 Freshener | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Zenith Freshener RTU | Zenith Freshener RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Zenith Freshener 7X RTU | Zenith Freshener 7X RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Zenith Sanitiser RTU | Zenith Sanitiser RTU | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Zenith Sanitiser 2X RTU | Zenith Sanitiser 2X RTU | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0031644-0015 1-4 | EU-0031644-0015 1-4 | EU-0031644-0015 1-4 | EU-0031644-0015 1-4 | EU-0031644-0015 1-4 |
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| L-(+)-lactic acid | Active substance | Active substance | 79-33-4 | 79-33-4 | 201-196-2 | 0,352 % (w/w) |
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.