Commission Implementing Regulation (EU) 2025/524 of 20 March 2025 granting a Union authorisation for the biocidal product family Sodium hypochlorite Liquid disinfectant biocidal product family in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

Hazard statements	H290: May be corrosive to metals. H315: Causes skin irritation. H319: Causes serious eye irritation. H412: Harmful to aquatic life with long lasting effects.
Precautionary statements	P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.. P302+P352: IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice. P390: Absorb spillage to prevent material damage. P406: Store in a corrosive resistant container with a resistant inner liner. P103: Read carefully and follow all instructions. P332+P313: If skin irritation occurs: Get medical advice. P362+P364: Take off contaminated clothing and wash it before reuse. P310: Immediately call a POISON CENTER. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations.

4. AUTHORISED USE(S) OF THE META SPC

4.1.   Use description

Table 1.

Hard non porous surface disinfection

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other
Field(s) of use	indoor use Indoor (domestic and institutional areas)
Application method(s)	Method: spraying Detailed description: -
Application rate(s) and frequency	Application rate: - Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast and fungi: 5 minutes Room temperature
Category(ies) of users	professional ; general public (non-professional)
Pack sizes and packaging material	500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger

4.1.1.   Use-specific instructions

See general directions for use.

4.1.2.   Use-specific risk mitigation measures

For non-professional users:

• — Product shall be sprayed downward

• — Wash hands after use

• — Avoid contact with skin and eyes

For secondary exposure of general public:

• — It shall be ensured that bystanders and general public do not touch the surface until the surface is rinsed and dry.

4.1.3.   Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

See general directions for use.

4.1.4.   Where specific to the use, the instructions for safe disposal of the product and its packaging

See general directions for use.

4.1.5.   Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use.

4.2.   Use description

Table 2.

Hard non porous surface disinfection

Product type	PT04: Food and feed area
Target organism(s) (including development stage)	Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other
Field(s) of use	indoor use Indoor (domestic and institutional areas)
Application method(s)	Method: spraying Detailed description: -
Application rate(s) and frequency	Application rate: - Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast and fungi: 5 minutes Room temperature
Category(ies) of users	professional
Pack sizes and packaging material	500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger

4.2.1.   Use-specific instructions

See general directions for use.

4.2.2.   Use-specific risk mitigation measures

See general directions for use.

For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. See section 6 for the full reference to this act.

4.2.3.   Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

See general directions for use.

4.2.4.   Where specific to the use, the instructions for safe disposal of the product and its packaging

See general directions for use.

4.2.5.   Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 6

5.1.   Instructions for use

• — Comply with the instruction for use. Respect the conditions of use of the product (concentration, contact time, temperature, etc.).

• — Ensure complete wetting on the surfaces, leave for appropriate contact time.

• — Product to be applied to hard surfaces by spraying. The nozzle of the product should be turned to the ‘ ‘on’ ’ position. Users are advised to spray product 20-25 cm away from surfaces.

• — Rinse treated surfaces after application.

• — Products should not be used in conjunction with acids or ammonia.

• — Inform the registration holder if the treatment is ineffective.

5.2.   Risk mitigation measures

For professional users:

Wear personal protective equipment during application and post-application of the products:

• — chemical resistant gloves classified under EN 374 or equivalent;

• — chemical googles classified under EN 16321 or equivalent;

• — protective coverall in accordance with EN 13034 or equivalent.

(material to be specified by the authorisation holder within the product information)

The full texts of the EN standards are available in Section 6

This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.

5.3.   Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

• — IF ON SKIN: Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation occurs: Get medical advice.

• — IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor.

• — IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor.

• — IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

• — If medical advice is needed, have product container or label at hand.

5.4.   Instructions for safe disposal of the product and its packaging

• — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.

• — Dispose of unused product, its packaging and all other waste, in accordance with local regulations.

5.5.   Conditions of storage and shelf-life of the product under normal conditions of storage

• — Shelf-life: 24 months.

• — Do not store above 30°C.

• — Protect from direct sunlight.

• — Keep out of reach of children and non-target animals/pets.

6. OTHER INFORMATION

The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 16321 - Eye and face protection for occupational use

EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).

The full title of the legal act mentioned in Section 4.2.2 ‘Use-specific risk mitigation measures’ is:

Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products (OJ L 178, 8.6.2020, p. 7–20).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 6

7.1.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Mould & Mildew Remover 1	Mould & Mildew Remover 1	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0012 1-6	EU-0029289-0012 1-6	EU-0029289-0012 1-6
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				0,94 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	6,83 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	0,2 % (w/w)
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides	Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides	Non-Active substance	Non-Active substance	308062-28-4	308062-28-4	931-292-6	0,14 % (w/w)

7.2.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Mould & Mildew Remover 2	Mould & Mildew Remover 2	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0013 1-6	EU-0029289-0013 1-6	EU-0029289-0013 1-6
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				0,94 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	6,83 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	0,15 % (w/w)
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides	Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides	Non-Active substance	Non-Active substance	308062-28-4	308062-28-4	931-292-6	0,14 % (w/w)

7.3.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Mould & Mildew Remover 3	Mould & Mildew Remover 3	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0014 1-6	EU-0029289-0014 1-6	EU-0029289-0014 1-6
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				0,94 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	6,83 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	0,15 % (w/w)
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides	Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides	Non-Active substance	Non-Active substance	308062-28-4	308062-28-4	931-292-6	0,14 % (w/w)

1. META SPC 7 ADMINISTRATIVE INFORMATION

1.1.   Meta SPC 7 identifier

Identifier	Meta SPC: Meta SPC G

1.2.   Suffix to the authorisation number

Number	1-7

1.3.   Product type(s)

Product type(s)	PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area

2. META SPC 7 COMPOSITION

2.1.   Qualitative and quantitative information on the composition of the meta SPC 7

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance			2,46 - 2,46 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	7681-52-9	231-668-3	17,79 - 17,79 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	1310-73-2	215-185-5	0,2 - 0,2 % (w/w)

2.2.   Type(s) of formulation of the meta SPC 7

Formulation type(s)	Ready to use liquid

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 7

Hazard statements	H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H410: Very toxic to aquatic life with long lasting effects. EUH071: Corrosive to the respiratory tract.
Precautionary statements	P234: Keep only in original packaging. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P406: Store in a corrosive resistant container with a resistant inner liner. P260: Do not breathe vapours. P260: Do not breathe spray. P310: Immediately call a POISON CENTER. P405: Store locked up. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations.

4. AUTHORISED USE(S) OF THE META SPC

4.1.   Use description

Table 1.

Hard non porous surface disinfection

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other Scientific name: Virus Common name: Virus Development stage: Other
Field(s) of use	indoor use Indoor (domestic, institutional and medical areas)
Application method(s)	Method: spraying Detailed description: -
Application rate(s) and frequency	Application rate: - Ready to use product. Number and timing of application: - Bacteria, yeast, fungi and virus: 5 min Room temperature
Category(ies) of users	professional
Pack sizes and packaging material	500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger.

4.1.1.   Use-specific instructions

See general directions for use.

4.1.2.   Use-specific risk mitigation measures

See general directions for use.

PT4: For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. See section 6 for the full reference to this act.

4.1.3.   Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

See general directions for use.

4.1.4.   Where specific to the use, the instructions for safe disposal of the product and its packaging

See general directions for use.

4.1.5.   Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 7

5.1.   Instructions for use

• — Comply with the instruction for use.

• — For healthcare settings: clean carefully the surfaces before application of the product.

• — Respect the conditions of use of the product (concentration, contact time, temperature, etc.).

• — Ensure complete wetting on the surfaces, leave for appropriate contact time.

• — Product to be applied to hard surfaces by spraying. The nozzle of the product should be turned to the ‘ ‘on’ ’ position. Users are advised to spray product 20-25cm away from surfaces, whilst keeping product upright.

• — Rinse treated surfaces after application.

• — Products should not be used in conjunction with acids or ammonia.

• — Inform the registration holder if the treatment is ineffective.

5.2.   Risk mitigation measures

For professional users:

Wear personal protective equipment during application and post-application of the products:

• — chemical resistant gloves classified under EN 374 or equivalent ;

• — chemical goggles classified under EN 16321 or equivalent ;

• — protective coverall in accordance with EN 13034 or equivalent;

(material to be specified by the authorisation holder within the product information)

• — Respiratory protective equipment (only during spraying) in accordance with EN 14387 or equivalent

The full texts of the EN standards are available in Section 6

This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.

For the bystander:

• — Do not be present in the treatment area during application by spraying. If it is necessary to be present, wear same RPE and PPE as the user.

• — For secondary exposure of general public:

• — By-standers shall not be present during application by spraying

• — It shall be ensured that bystanders and general public do not touch the surface until the surface is rinsed and dry.

5.3.   Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

• — IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

• — IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

• — Information to Healthcare personnel/doctor:

• — The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

• — IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

• — IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

• — If symptoms: Call 112/ambulance for medical assistance.

• — If no symptoms: Call a POISON CENTRE or a doctor.

• — Keep the container or label available.

5.4.   Instructions for safe disposal of the product and its packaging

• — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.

• — Dispose of unused product, its packaging and all other waste, in accordance with local regulations.

5.5.   Conditions of storage and shelf-life of the product under normal conditions of storage

• — Shelf-life: 24 months.

• — Do not store above 30°C.

• — Protect from direct sunlight.

6. OTHER INFORMATION

The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 16321 - Eye and face protection for occupational use

EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)

EN 14387 - Respiratory protective devices - Gas filter(s) and combined filter(s)- Requirements, testing, marking

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).

Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products (OJ L 178, 8.6.2020, p. 7–20).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 7

7.1.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Anti-bacterial Mould & Mildew Remover 1	Anti-bacterial Mould & Mildew Remover 1	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0015 1-7	EU-0029289-0015 1-7	EU-0029289-0015 1-7
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				2,46 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	17,79 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	0,2 % (w/w)

7.2.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Anti-bacterial Mould & Mildew Remover 2	Anti-bacterial Mould & Mildew Remover 2	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0016 1-7	EU-0029289-0016 1-7	EU-0029289-0016 1-7
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				2,46 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	17,79 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	0,2 % (w/w)

7.3.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Black Mould Remover 1	Black Mould Remover 1	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0017 1-7	EU-0029289-0017 1-7	EU-0029289-0017 1-7
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				2,46 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	17,79 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	0,2 % (w/w)

1. META SPC 8 ADMINISTRATIVE INFORMATION

1.1.   Meta SPC 8 identifier

Identifier	Meta SPC: Meta SPC H

1.2.   Suffix to the authorisation number

Number	1-8

1.3.   Product type(s)

Product type(s)	PT04: Food and feed area PT02: Disinfectants and algaecides not intended for direct application to humans or animals

2. META SPC 8 COMPOSITION

2.1.   Qualitative and quantitative information on the composition of the meta SPC 8

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance			2,09 - 2,09 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	7681-52-9	231-668-3	15,1 - 15,1 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	1310-73-2	215-185-5	0,1 - 0,1 % (w/w)

2.2.   Type(s) of formulation of the meta SPC 8

Formulation type(s)	Ready to use liquid

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 8

Hazard statements	H290: May be corrosive to metals. H315: Causes skin irritation. H319: Causes serious eye irritation. H412: Harmful to aquatic life with long lasting effects. EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine).
Precautionary statements	P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.. P302+P352: IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice. P390: Absorb spillage to prevent material damage. P406: Store in a corrosive resistant container with a resistant inner liner. P103: Read carefully and follow all instructions. P332+P313: If skin irritation occurs: Get medical advice. P362+P364: Take off contaminated clothing and wash it before reuse. P310: Immediately call a POISON CENTER. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations.

4. AUTHORISED USE(S) OF THE META SPC

4.1.   Use description

Table 1.

Hard non porous surface disinfection

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Virus Common name: Virus Development stage: Virus
Field(s) of use	indoor use Indoor (domestic, institutional and medical areas)
Application method(s)	Method: spraying Detailed description: -
Application rate(s) and frequency	Application rate: - Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast, fungi and virus: 5 min Room temperature
Category(ies) of users	professional ; general public (non-professional)
Pack sizes and packaging material	500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger.

4.1.1.   Use-specific instructions

See general directions for use.

4.1.2.   Use-specific risk mitigation measures

For non-professional users:

• — Product shall be sprayed downward

• — Wash hand after use

• — Avoid contact with skin and eyes

For secondary exposure of general public:

• — It shall be ensured that bystanders and general public do not touch the surface until the surface is rinsed and dry.

4.1.3.   Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

See general directions for use.

4.1.4.   Where specific to the use, the instructions for safe disposal of the product and its packaging

See general directions for use.

4.1.5.   Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use.

4.2.   Use description

Table 2.

Hard non porous surface disinfection

Product type	PT04: Food and feed area
Target organism(s) (including development stage)	Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Virus Common name: Virus Development stage: Virus
Field(s) of use	indoor use Indoor (domestic, institutional and medical areas)
Application method(s)	Method: spraying Detailed description: -
Application rate(s) and frequency	Application rate: - Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast, fungi and virus: 5 min Room temperature
Category(ies) of users	professional
Pack sizes and packaging material	500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger.

4.2.1.   Use-specific instructions

See general directions for use.

4.2.2.   Use-specific risk mitigation measures

See general directions for use.

For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. See section 6 for the full reference to this act.

4.2.3.   Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

See general directions for use.

4.2.4.   Where specific to the use, the instructions for safe disposal of the product and its packaging

See general directions for use.

4.2.5.   Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 8

5.1.   Instructions for use

• — Comply with the instruction for use.

• — For healthcare settings: clean carefully the surfaces before application of the product.

• — Respect the conditions of use of the product (concentration, contact time, temperature, etc.).

• — Ensure complete wetting on the surfaces, leave for appropriate contact time.

• — Product is to be applied by spraying. The nozzle of the product should be turned to the ‘on’ position. Users are advised to spray product 20-25cm away from surfaces.

• — Rinse treated surfaces after application.

• — Products should not be used in conjunction with acids or ammonia.

• — Inform the registration holder if the treatment is ineffective.

5.2.   Risk mitigation measures

For professional users:

Wear personal protective equipment during application and post-application of the products:

• — chemical resistant gloves classified under EN 374 or equivalent ;

• — chemical goggles classified under EN 16321 or equivalent ;

• — protective coverall in accordance with EN 13034 or equivalent;

(material to be specified by the authorisation holder within the product information)

The full texts of the EN standards are available in Section 6

This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.

5.3.   Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

• — IF ON SKIN: Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation occurs: Get medical advice.

• — IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor.

• — IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor.

• — IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

• — If medical advice is needed, have product container or label at hand.

5.4.   Instructions for safe disposal of the product and its packaging

• — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.

• — Dispose of unused product, its packaging and all other waste, in accordance with local regulations.

5.5.   Conditions of storage and shelf-life of the product under normal conditions of storage

• — Shelf-life: 24 months.

• — Do not store above 30°C.

• — Protect from direct sunlight.

• — Keep out of reach of children and non-target animals/pets.

6. OTHER INFORMATION

The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 16321 - Eye and face protection for occupational use

EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).

The full title of the legal act mentioned in Section 4.2.2 ‘Use-specific risk mitigation measures’ is:

Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products (OJ L 178, 8.6.2020, p. 7–20).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 8

7.1.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Black Mould remover 2	Black Mould remover 2	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0018 1-8	EU-0029289-0018 1-8	EU-0029289-0018 1-8
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				2,09 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	15,1 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	0,1 % (w/w)

7.2.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Bleach & Hygiene	Bleach & Hygiene	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0019 1-8	EU-0029289-0019 1-8	EU-0029289-0019 1-8
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				2,09 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	15,1 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	0,1 % (w/w)

7.3.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Anti-bacterial Mould & Mildew Remover 3	Anti-bacterial Mould & Mildew Remover 3	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0020 1-8	EU-0029289-0020 1-8	EU-0029289-0020 1-8
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				2,09 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	15,1 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	0,1 % (w/w)

1. META SPC 9 ADMINISTRATIVE INFORMATION

1.1.   Meta SPC 9 identifier

Identifier	Meta SPC: Meta SPC I

1.2.   Suffix to the authorisation number

Number	1-9

1.3.   Product type(s)

Product type(s)	PT02: Disinfectants and algaecides not intended for direct application to humans or animals

2. META SPC 9 COMPOSITION

2.1.   Qualitative and quantitative information on the composition of the meta SPC 9

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance			5,81 - 5,81 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	7681-52-9	231-668-3	42,07 - 42,07 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	1310-73-2	215-185-5	1 - 2 % (w/w)

2.2.   Type(s) of formulation of the meta SPC 9

Formulation type(s)	Ready to use liquid

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 9

Hazard statements	H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H410: Very toxic to aquatic life with long lasting effects. EUH031: Contact with acids liberates toxic gas. EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine).
Precautionary statements	P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P391: Collect spillage. P406: Store in a corrosive resistant container with a resistant inner liner. P103: Read carefully and follow all instructions. P260: Do not breathe vapours. P260: Do not breathe spray. P310: Immediately call a POISON CENTER. P405: Store locked up. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations.

4. AUTHORISED USE(S) OF THE META SPC

4.1.   Use description

Table 1.

Toilet bowl disinfection

Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use	-
Target organism(s) (including development stage)	Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: other
Field(s) of use	indoor use Indoor (domestic, institutional and medical areas)
Application method(s)	Method: pouring Detailed description: -
Application rate(s) and frequency	Application rate: 80 ml/toilet bowl Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast and fungi: 15 minutes Room temperature
Category(ies) of users	professional ; general public (non-professional)
Pack sizes and packaging material	500 mL, 680 mL, 700 mL, 750 mL opaque HDPE bottles. Plastic (polypropylene) cap. Plastic insert plug and bent bottle neck (LDPP). CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users.

4.1.1.   Use-specific instructions

See general directions for use.

4.1.2.   Use-specific risk mitigation measures

See general directions for use.

4.1.3.   Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

See general directions for use.

4.1.4.   Where specific to the use, the instructions for safe disposal of the product and its packaging

See general directions for use.

4.1.5.   Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See general directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 9

5.1.   Instructions for use

• — Comply with the instruction for use.

• — For healthcare settings: clean carefully the surfaces before application of the product.

• — Respect the conditions of use of the product (concentration, contact time, temperature, etc.).

• — Squeeze and apply slowly all around the inside of the bowl, allowing enough liquid to cover the bowl completely.

• — The recommended dose is approximately 80 mL.

• — Products should not be used in conjunction with acids or ammonia.

• — No other cleaning agents should be used in conjunction with the product.

• — Inform the registration holder if the treatment is ineffective.

5.2.   Risk mitigation measures

For professional users:

Wear personal protective equipment during application of the products:

• — chemical resistant gloves classified under EN 374 or equivalent;

• — chemical goggles classified under EN 16321 or equivalent ;

• — protective coverall in accordance with EN 13034 or equivalent;

(material to be specified by the authorisation holder within the product information)

The full texts of the EN standards are available in Section 6.

This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.

For non-professional users:

• — Do not touch the product during application

• — Wash hands after use

• — Avoid contact with skin and eyes

• — Avoid splashes during application

5.3.   Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

• — IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

• — IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

• — Information to Healthcare personnel/doctor:

• — The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

• — IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

• — IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

• — If symptoms: Call 112/ambulance for medical assistance.

• — If no symptoms: Call a POISON CENTRE or a doctor.

• — If medical advice is needed, have product container or label at hand.

5.4.   Instructions for safe disposal of the product and its packaging

• — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.

• — Dispose of unused product, its packaging and all other waste, in accordance with local regulations.

5.5.   Conditions of storage and shelf-life of the product under normal conditions of storage

• — Shelf-life: 24 months.

• — Do not store above 30°C.

• — Protect from direct sunlight.

• — Keep out of reach of children and non-target animals/pets.

6. OTHER INFORMATION

The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 16321 - Eye and face protection for occupational use

EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 9

7.1.   Trade name(s), authorisation number and specific composition of each individual product

Trade name(s)	Trade name(s)	Trade name(s)	Toilet Bowl Bleach	Toilet Bowl Bleach	Market area: EU	Market area: EU	Market area: EU
Authorisation number	Authorisation number	Authorisation number			EU-0029289-0021 1-9	EU-0029289-0021 1-9	EU-0029289-0021 1-9
Common name	IUPAC name	Function	Function	CAS number	CAS number	EC number	Content (%)
Active chlorine released from sodium hypochlorite		active substance	active substance				5,81 % (w/w)
Sodium hypochlorite	Sodium hypochlorite	releaser	releaser	7681-52-9	7681-52-9	231-668-3	42,07 % (w/w)
Sodium hydroxide	Sodium hydroxide	Non-Active substance	Non-Active substance	1310-73-2	1310-73-2	215-185-5	2 % (w/w)

ELI: http://data.europa.eu/eli/reg_impl/2025/524/oj

ISSN 1977-0677 (electronic edition)