Motor Cycles (Eye Protectors) Regulations (Northern Ireland) 2000

Made: 9th May 2000

Coming into operation: 21st June 2000

The Department of the Environment, in exercise of the powers conferred on it by Articles 29(1) and 110(2) of the Road Traffic (Northern Ireland) Order 1995[^f00001], and of every other power enabling it in that behalf, hereby makes the following Regulations:

Citation, commencement and interpretation

1

• (1) These Regulations may be cited as the Motor Cycles (Eye Protectors) Regulations (Northern Ireland) 2000 and shall come into operation on 21st June 2000.

• (2) In these Regulations—

• “ECE Regulation 22” means Regulation No. 22 set out in Addendum 21 to the UNECE Agreement;

• “ECE Regulation 22.05” means ECE Regulation 22 as amended by the 05 series of amendments and all previous amendments in operation on 14th May 2001;

• “EEA State” means a State which is a contracting party to the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 as adjusted by the Protocol signed at Brussels on 17th March 1993;

• “eye protector” means an appliance designed or adapted for use with any headgear or by being attached to or placed upon the head by a person driving or riding on a motor bicycle and intended for the protection of the eyes;

• “motor bicycle” means a two-wheeled motor cycle, whether or not having a side-car attached, and for the purposes of this definition, where the distance measured between the centre of the area of contact with the road surface of any two wheels of a motor cycle is less than 460 millimetres, those wheels shall be counted as one wheel;

• “the UNECE Agreement” means the Agreement of the United Nations Economic Commission for Europe concluded at Geneva on 20th March 1958 as amended concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or used on wheeled vehicles and the conditions for the reciprocal recognition of approvals granted on the basis of these prescriptions, to which the United Kingdom is a party by virtue of an instrument of accession dated 14th January 1963 deposited with the Secretary General of the United Nations on 15th January 1963.

Prescribed types of authorised eye protector

2

• (1) Subject to paragraph (3), the types of eye protector hereby prescribed as authorised for use by persons driving or riding (otherwise than in a side-car) on a motor bicycle are—

• (a) those which conform—

• (i) to the requirements relating to Grade X in British Standard BS 4110:1979 and are marked with that Grade and the number of that standard,

• (ii) to the requirements relating to Grades XA, YA or ZA in British Standard BS 4110:1979 as amended by Amendment No. 1 (AMD 3368), Amendment No. 2 (AMD 4060) and Amendment No. 3 (AMD 4630) and are marked with the number of that standard and the Grade to which they conform, or

• (iii) to any other standard accepted by an EEA State, which offers in use levels of safety, suitability and fitness for purpose equivalent to those offered by the standards referred to in paragraph (i) or (ii) above, and are marked with a mark to indicate that standard,

and in each case are marked with an approved certification mark of an approved body (whether or not they are required to be so marked by the standard in point);

• (aa) those which conform with ECE Regulation 22.05 including the approval, marking and conformity of production requirements of that Regulation;

• (b) those which comply with the requirements of Council Directive 89/686/EEC[^f00003] of the 21st December 1989 on the approximation of the laws of the Member States relating to personal protective equipment as amended by Council Directives 93/68/EEC[^f00004] of 22nd July 1993, 93/95/EEC[^f00005] of 29th October 1993 and 96/58/EEC[^f00006] of 3rd September 1996; or

• (c) those which were first used before 1st April 1989 and fulfil all of the following requirements—

• (i) they are fitted with lenses that are designed to correct a defect in sight,

• (ii) they transmit 50 per cent or more of the light, and

• (iii) they do not fly into fragments if fractured.

• (2) For the purposes of this regulation—

• (a) an approved certification mark is—

• (i) the certification mark of the British Standards Institution; or

• (ii) a certification mark which indicates that a conformity assessment equivalent to that of the British Standards Institution has been undertaken, and

• (b) an approved body is—

• (i) the British Standards Institution; or

• (ii) any body approved by an EEA State to undertake conformity assessments equivalent to those undertaken by the British Standards Institution.

• (3) The types of eye protector prescribed by paragraph (1) are not prescribed as authorised for use by persons to whom paragraph (4) applies.

• (4) This paragraph applies to any person driving or riding on a motor bicycle if—

• (a) it is a mowing machine;

• (b) it is for the time being propelled by a person on foot;

• (c) it is a vehicle brought temporarily into Northern Ireland by a person resident outside the United Kingdom which has not remained in the United Kingdom for a period of more than one year from the date it was last brought into the United Kingdom; or

• (d) that person is in the armed forces of the Crown, is on duty and is wearing an eye protector supplied to him as part of his service equipment.

Signed

Sealed with the Official Seal of the Department of the Environment on 9th May 2000.

F. Dillon — A senior officer of the — Department of the Environment

Explanatory note

(This note is not part of the Regulations.)

These Regulations prescribe certain types of eye protectors as authorised for use by persons driving or riding on a motor bicycle. The eye protectors are so prescribed by reference to—

• (a) conformity with certain grades within certain British Standards;

• (b) conformity with any other standard accepted by a European Economic Area (“EEA”) State which offers in use equivalent levels of safety, suitability and fitness for purpose;

• (c) conformity with the requirements of Council Directive 89/686/EEC as amended by Council Directives 93/68/EEC, 93/95/EEC and 96/58/EEC (the relevant technical specification either being the harmonised European Standard (EN 1938:1998 Personal eye protection – Goggles for motorcycle and moped users), or a technical specification verified as meeting the requirements of the Directive by a body approved to do so under the Directive); or

• (d) in relation to eye protectors first used before 1st April 1989 conformity with the requirements specified in regulation 2(1)(c).

In the context of (b) “equivalent levels” means levels which are the same or greater in respect of the factors specified.

An eye protector that conforms to the prescribed British standard or any other standard accepted by an EEA State must be marked with the relevant standard with which it conforms and an approved certification mark of an approved body.

The types of eye protector specified in paragraph (1) of regulation 2 are not prescribed for use by persons falling within paragraph (4) and no type is prescribed for these persons.

These Regulations have been notified to the European Commission pursuant to European Parliament and Council Directive 98/34/EC of 22nd June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations (O.J. 1998 No. L204, p. 37). The requirements set out in sub-paragraph (1)(b) of regulation 2 apply only to motorcyclists' goggles. The Personal Protective Equipment (EC Directive) Regulations 1992 (S.I. 1992/3139, as amended by S.I. 1993/3074, S.I. 1994/2326 and S.I. 1996/3039) have the effect of requiring all motorcyclists' goggles which are placed on the market to meet these requirements.

The requirements for every person driving or riding (otherwise than in a side-car) on a motor bicycle on a road to wear protective headgear are contained in the Motor Cycles (Protective Helmets) Regulations (Northern Ireland) 1999 (S.R. 1999 No. 170).

The British Standards and amendments may be obtained from any outlet operated by the British Standards Institution (BSI) or by post from BSI at 389 Chiswick High Road, London W4 4AL (Telephone number: 0208 996 9000).

Copies of the Council Directives referred to in these Regulations and this Explanatory Note can be obtained from The Stationery Office Bookshop, 16 Arthur Street, Belfast BT1 4GD.

Footnotes

[^f00001]: S.I. 1995/2994 (N.I. 18); see Article 2(2) for the definition of “the Department”

[^f00003]: O.J. No. L399, 30.12.89, p. 18

[^f00004]: O.J. No. L220, 30.8.93, p. 1

[^f00005]: O.J. No. L276, 9.11.93, p. 11

[^f00006]: O.J. No. L236, 18.9.96, p. 44

Editorial notes

[^key-6eec5317036386e9b57d05fbcc2b90a1]: Reg. 1 in operation at 21.6.2000, see reg. 1(1)

[^key-beb13c55490d5d748c6a07f611849936]: Reg. 2 in operation at 21.6.2000, see reg. 1(1)

[^key-11a3a04579c31f04b4f4d834c53ddaba]: Reg. 1(2) substituted (14.5.2001) by Motor Cycles (Eye Protectors) (Amendment) Regulations (Northern Ireland) 2001 (S.R. 2001/146), regs. 1, 2(2)

[^key-f8e00b98acb9f74c7f4b1af2590d3f83]: Reg. 2(1)(aa) inserted (14.5.2001) by Motor Cycles (Eye Protectors) (Amendment) Regulations (Northern Ireland) 2001 (S.R. 2001/146), regs. 1, 2(3)