Council regulation (EEC) No 2229/89 of 18 July 1989 on the application of Decision No 1/89 of the EEC-Malta Association Council amending, as a result of the introduction of the harmonized system, Protocol No 2 concerning the definition of the concept of 'originating products' and methods of administrative cooperation

COUNCIL REGULATION (EEC) No 2229/89 of 18 July 1989 on the application of Decision No 1/89 of the EEC-Malta Association Council amending, as a result of the introduction of the harmonized system, Protocol No 2 concerning the definition of the concept of 'originating products' and methods of administrative cooperation

THE COUNCIL OF THE EUROPEAN COMMUNITIES, Having regard to the Treaty establishing the European Economic Community, and in particular Article 113 thereof, Having regard to the proposal from the Commission, Whereas the Agreement establishing an Association between the European Economic Community and Malta (1) was signed on 5 December 1970;

Whereas, by virtue of Article 25 of the Protocol concerning the definition of the concept of 'originating products' and methods of administrative cooperation, which forms an integral part of the abovementioned Agreement, the EEC-Malta Association Council has adopted Decision No 1/89 amending the said Protocol;

Whereas it is necessary to apply this Decision in the Community, HAS ADOPTED THIS REGULATION:

Article 1

Decision No 1/89 of the EEC-Malta Association Council shall apply in the Community.

The text of the Decision is attached to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Communities.

It shall apply from 1 January 1990. This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 18 July 1989. For the Council The President R. DUMAS (1) OJ No L 61, 14. 3. 1971, p. 2. DECISION No 1/89 OF THE EEC-MALTA ASSOCIATION COUNCIL of 20 March 1989 amending, as a consequence of the introduction of the harmonized system, Protocol No 2 concerning the definition of the concept of 'originating products' and methods of administrative cooperation

THE ASSOCIATION COUNCIL, Having regard to the Agreement creating an Association between the European Economic Community and Malta, signed on 5 December 1970, Having regard to Protocol No 2 concerning the definition of the concept of 'originating products' and methods of administrative cooperation, and in particular Article 25 thereof, Whereas the origin rules contained in Protocol No 2 are based on the use of the Customs Cooperation Council Nomenclature;

whereas the Customs Cooperation Council approved the International Convention on the Harmonized Commodity Description and Coding System (hereinafter referred to as the 'harmonized system') on 14 June 1983;

whereas as from 1 January 1988 the harmonized system was introduced for the purposes of international trade;

whereas it is therefore necessary to adapt the rules of origin contained in Protocol No 2 so that they are based on the use of the harmonized system;

Whereas, in the light of experience, the presentation of the origin rules could be improved by grouping all the exceptions to the basic change of heading rule into one list and by providing detailed guidance on how it should be interpreted, HAS DECIDED AS FOLLOWS:

Article 1

In Article 1 of Protocol No 2, the words 'in List C in Annex IV' are replaced by 'in Annex II'. Article 2

Article 3 of Protocol No 2 is replaced by the following:

'Article 3 1. The expressions "Chapters" and "headings" used in this Protocol shall mean the chapters and the headings (four digit codes) used in the nomenclature which makes up the "harmonized commodity description and coding system" (hereinafter referred to as the "harmonized system" or "HS").The expression "classified" shall refer to the classification of a product or material under a particular heading.

(a) operations to ensure the preservation of merchandise in good condition during transport and storage (ventilation, spreading out, drying, chilling, placing in salt, sulphur dioxide or other aqueous solutions, removal of damaged parts, and like operations);

(b)simple operations consisting of removal of dust, sifting or screening, sorting, classifying, matching (including the making up of sets of articles), washing, painting, cutting up;

(c)i(i) changes of packaging and breaking up and assembly of consignments;

(ii)simple placing in bottles, flasks, bags, cases, boxes, fixing on cards or boards, etc.

, and all other simple packaging operations;

(d)affixing marks, labels or other like distinguish- ing signs on products or their packaging;

(e)simple mixing of products, whether or not of different kinds, where one or more components of the mixture do not meet the conditions laid down in this Protocol to enable them to be considered as originating;

(f)simple assembly of parts of articles to constitute a complete article;

(g)a combination of two or more operations specified in subparagraphs (a) to (f);

(h)slaughter of animals.

' Article 3

Article 4 of Protocol No 2 is replaced by the following:

'Article 41. The term "value" in the List in Annex III shall mean the customs value at the time of the import of the non-originating materials used or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the territory concerned.

Where the value of the originating materials used needs to be established, this paragraph shall be applied mutatis mutandis.

' Article 4

Article 6 of Protocol No 2 is hereby amended as follows:

'4. Sets within the meaning of General Rule 3 of the harmonized system shall be regarded as originating when all component articles are originating products.

Nevertheless, when a set is composed of originating and non-originating articles, the set as a whole shall be regarded as originating provided that the value of the non-originating articles does not exceed 15 % of the ex-works price of the set.

' Article 5

Article 7

This Decision shall apply from 1 January 1990. Done at Brussels, 20 March 1989. For the Association Council The President U. MIFSUD BONNICI Joint Declaration concerning the review of the changes to the origin rules as a result of the introduction of the harmonized system

Where, following the amendments made to the nomenclature, the new rules introduced by Decision No 1/89 alter the substance of any rule existing prior to Decision No 1/89 and it appears that such alteration results in a situation prejudicial to the interest of the sectors concerned, then, if one of the contracting parties so requests in the period up to and including 31 December 1992, an examination shall be made as a matter of urgency by the Association Council, of the need to restore the rule concerned as it was before Decision No 1/89. In any case, the Association Council shall decide to restore, or not to restore, the substance of the rule concerned within a period of three months of the request being made to it by either of the parties to the Agreement.

If the substance of the rule concerned is restored, then the parties to the Agreement shall also provide the legal framework necessary to guarantee that any customs duties improperly levied on the products concerned imported after 1 January 1990 can be reimbursed.

ANNEX I

EXPLANATORY NOTES Note 1: Articles 1 and 2 The terms 'the Community' and 'Malta' shall also cover the territorial waters of the Member States of the Community and of Malta respectively.Vessels operating on the high seas, including factory ships, on which fish caught are worked or processed, shall be considered as part of the territory of the State to which they belong provided that they satisfy the conditions set out in Explanatory Note 4. Note 2 - Article 1 The conditions set out in Article 1 relative to the acquisition of originating status must be fulfilled without interruption in the Community or Malta.If originating products exported from the Community or Malta to another country are returned, they must be considered as non-originating unless it can be demonstrated to the satisfaction of the customs authorities that:- the goods returned are the same goods as those exported,and -they have not undergone any operations beyond that necessary to preserve them in good condition while in that country. Note 3 - Article 1 In order to determine whether goods originate in the Community or in Malta it shall not be necessary to establish whether the power and fuel, plant and equipment, and machines and tools used to obtain such goods originate in third countries or not. Note 4 - Article 2 (f) The term 'their vessels' shall apply only to vessels:- which are registered or recorded in a Member State or in Malta,-which sail under the flag of a Member State or of Malta,-at least 50 % of which are owned by nationals of the Member States and Malta or by a company which has its head office in a Member State or in Malta, of which the manager, managers, chairman of the board, and the majority of the members of such board are nationals of the Member States or Malta and of which, in addition, in the case of partnerships or limited companies, at least halt the capital belongs to the Member States or to Malta or to public bodies or nationals of the Member States or of Malta,-of which the captain and officers are all nationals of the Member States or of Malta,-of which at least 75 % of the crew are nationals of the Member States or of Malta. Note 5 - Articles 2 and 3 1. The unit of qualification for the application of the origin rules shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the harmonized system. In the case of sets of products which are classified by virtue of General Rule 3, the unit of qualification shall be determined in respect of each item in the set; this also applies to the sets of heading Nos 6308, 8206 and 9605.Accordingly, it follows that:- when a product composed of a group or assembly of articles is classified under the terms of the harmonized system in a single heading, the whole constitutes the unit of qualification,-when a consignment consists of a number of identical products classified under the same heading of the harmonized system, each products must be taken individually when applying the origin rules.2.Where, under General Rule 5 of the harmonized system, packing is included with the product for classification purposes, it shall be included for purposes of determining origin. Note 6 - Article 3 (1) The Introductory Notes to Annex III shall also apply where appropriate to all products manufactured using non-originating materials even if they are not subject to a specific condition contained in the List in Annex III but are subject instead to the change of heading rule set out in Article 3 (1). Note 7 - Article 4 'Ex-works price' shall mean the price paid to the manufacturer in whose undertaking the last working or processing is carried out, provided the price includes the value of all the products used in manufacture. 'Customs value' shall be understood as meaning the customs value laid down in the Convention concerning the valuation of goods for customs purposes signed in Brussels on 15 December 1950.

ANNEX II

List of products referred to in Article 1 which are temporarily excluded from the scope of this Protocol

HS headingNo Description of product ex 2707 Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250° C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels ex 2709to2715 Mineral oils and products of their distillation; bituminous substances; mineral waxes ex 2901 Acyclic hydrocarbons for use as power or heating fuels ex 2902 Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuels ex 3403 Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, provided they represent less than 70 % by weight ex 3404 Artificial waxes and prepared waxes with a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax ex 3811 Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals

ANNEX III

List of working or processing required to be carried out on non-originating materials in order that the product manufactured can obtain originating status INTRODUCTORY NOTES General Note 1: 1.1. The first two columns in the list describe the product obtained. The first column gives the heading number, or the chapter number, used in the harmonized system and the second column gives the description of goods used in that system for that heading or chapter. For each entry in the first two columns a rule is specified in column 3. Where, in some cases, the entry in the first column is preceded by an 'ex', this signifies that the rule in column 3 applies only to the part of that heading or chapter as described in column 2. 1.2.Where several heading numbers are grouped together in column 1 or a chapter number is given and the description of product in column 2 is therefore given in general terms, the adjacent rule in column 3 applies to all products which, under the harmonized system, are classified in headings of the chapter or in any of the headings grouped together in column 1. 1.3.Where there are different rules in the list applying to different products within a heading, each indent contains the description of that part of the heading covered by the adjacent rule in column 3. Note 2: 2.1.The term 'manufacture' covers any kind of working or processing including 'assembly' or specific operations. However, see Note 3.5 below. 2.2.The term 'material' covers any 'ingredient', 'raw material', 'component' or 'part', etc., used in the manufacture of the product. 2.3.The term 'product' refers to the product being manufactured, even if it is intended for later use in another manufacturing operation. Note 3: 3.1.In the case of any heading not in the list or any part of a heading that is not in the list, the 'change of heading' rule set out in Article 3 (1) applies. If a 'change of heading' condition applies to any entry in the list, then it is contained in the rule in column 3. 3.2.The working or processing required by a rule in column 3 has to be carried out only in relation to the non-originating materials used. The restrictions contained in a rule in column 3 likewise apply only to the non-originating materials used. 3.3.Where a rule states that 'materials of any heading' may be used, materials of the same heading as the product may also be used, subject, however, to any specific limitations which may also be contained in the rule. However, the expression 'manufacture from materials of any heading including other materials of heading No . . .' means that only materials classified in the same heading as the product of a different description than that of the product as given in column 2 of the list may be used. 3.4.If a product, made from non-originating materials which has acquired originating status during manufacture by virtue of the change of heading rule or its own list rule, is used as a material in the process of manufacture of another product, then the rule applicable to the product in which it is incorporated does not apply to it. - For example, an engine of heading No 8407, for which the rule states that the value of the non-originating materials which may be incorporated may not exceed 40 % of the ex works price, is made from 'other alloy steel roughly shaped by forging' of heading No 7224. If this forging has been forged in the country concerned from a non-originating ingot then the forging has already acquired origin by virtue of the rule for heading No ex 7224 in the List. It can then count as originating in the value calculation for the engine regardless of whether it was produced in the same factory or another. The value of the non-originating ingot is thus not taken into account when adding up the value of the non-originating materials used. 3.5.Even if the change of heading rule or the rule contained in the list is satisfied, a product does not have origin if the processing carried out, taken as a whole, is insufficient within the meaning of Article 3 (4). Note 4: 4.1. The rule in the list represents the minimum amount of working or processing required and the carrying out of more working or processing also confers originating status; conversely, the carrying out of less working or processing cannot confer origin. Thus if a rule says that non-originating material at a certain level of manufacture may be used, the use of such material at an earlier stage of manufacture is allowed and the use of such material at a later stage is not. 4.2.When a rule in the list specifies that a product may be manufactured from more than one material, this means that any one or more of the materials may be used. It does not require that all be used. - For example, the rule for fabrics says that natural fibres may be used and that chemical materials, among other materials, may also be used. This does not mean that both have to be used, one can use one or the other or both.If, however, a restriction applies to one material and other restrictions apply to other materials in the same rule, then the restrictions only apply to the materials actually used.-For example, the rule for sewing machines specifies that the thread tension mechanism used has to originate and that the zigzag mechanism used also has to originate; these two restrictions only apply if the mechanisms concerned are actually incorporated into the sewing machine. 4.3.When a rule in the list specifies that a product must be manufactured from a particular material, the condition obviously does not prevent the use of other materials which, because of their inherent nature, cannot satisfy the rule.-For example, the rule for heading No 1904 which specifically excludes the use of cereals or their derivatives does not prevent the use of mineral salts, chemicals and other additives which are not produced from cereals.-For example, in the case of an article made from non-woven materials, if the use of only non-originating yarn is allowed for this class of article, it is not possible to start from non-woven cloth - even if non-wovens cannot normally be made from yarn. In such cases, the starting material would normally be at the stage before yarn - that is the fibre stage.See also Note 7.3 in relation to textiles. 4.4.If in a rule in the list two or more percentages are given for the maximum value of non-originating materials that can be used, then these percentages may not be added together. The maximum value of all the non-originating materials used may never exceed the highest of the percentages given. Furthermore, the individual percentages must not be exceeded in relation to the particular materials they apply to. Textiles Note 5: 5.1.The term 'natural fibres' is used in the list to refer to fibres other than artificial or synthetic fibres and is restricted to the stages before spinning takes place, including waste and unless otherwise specified, the term 'natural fibres' includes fibres that have been carded, combed or otherwise processed but not spun. 5.2.The term 'natural fibres' includes horsehair of heading No 0503, silk of heading Nos 5002 and 5003 as well as the wool fibres, fine or coarse animal hair of heading Nos 5101 to 5105, the cotton fibres of heading Nos 5201 to 5203 and the other vegetable fibres of heading Nos 5301 to 5305. 5.3.The terms 'textile pulp', 'chemical materials' and 'paper making materials' are used in the list to describe the materials not classified in chapters 50 to 63, which can be used to manufacture artificial, synthetic or paper fibres or yarns. 5.4.The term 'man-made staple fibres' is used in the list to refer to synthetic or artificial filament tow, staple fibres or waste, of heading Nos 5501 to 5507. Note 6: 6.1.In the case of the products classified in those headings in the list to which a reference is made in this Introductory Note, the conditions set out in column 3 of the list shall not be applied to any basic textile materials used in their manufacture which, taken together, represent 10 % or less of the total weight of all the basic textile materials used (but see also Notes 6.3 and 6.4 below). 6.2.However, this tolerance may only be applied to mixed products which have been made from two or more basic textile materials, irrespective of their share of the product.The following are the basic textile materials: - silk, - wool, - coarse animal hair, - fine animal hair, - horsehair, - cotton, - paper making materials and paper, - flax, - true hemp, - jute and other textile bast fibres, - sisal and other textile fibres of the genus Agave, - coconut, abaca, ramie and other vegetable textile fibres, - synthetic man-made filaments, - artificial man-made filaments, - synthetic man-made staple fibres, - artificial man-made staple fibres.-For example, a yarn of heading No 5205 made from cotton fibres and synthetic staple fibres is a mixed yarn. Therefore, non-originating materials that do not satisfy the origin rules may be used up to a weight of 10 % of the yarn.-For example, a woollen fabric of heading No 5112 made from woollen yarn and synthetic yarn of staple fibres is a mixed fabric. Therefore, either non-originating synthetic yarn or woollen yarn or a combination thereof that does not satisfy the origin rules may be used up to a weight of 10 % of the fabric.-For example, tufted textile fabric of heading No 5802 made from cotton yarn and cotton fabric is only a mixed product if the cotton fabric is itself a mixed fabric being made from two or more different basic textile materials or if the cotton yarns used are themselves mixtures.-For example, if the tufted textile fabric concerned had been made from cotton yarn and synthetic fabric, then, obviously, two separate basic textile materials would have been used. -For example, a carpet with tufts made both from artificial yarns and tufts made from cotton yarns and with a jute backing is a mixed product because three basic textile materials are used. Thus, any non-originating materials that are used at a later stage of manufacture than the rule allows, may be used, provided their total weight taken together does not exceed 10 % of the weight of the textile materials in the carpet. Thus, the jute backing, the artificial yarns and/or the cotton yarns could be imported at that stage of manufacture, provided the weight conditions are met. 6.3.In the case of fabrics incorporating 'yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped' this tolerance is 20 % in respect of this yarn. 6.4.In the case of fabrics incorporating strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of an adhesive between two films of plastic film, this tolerance is 30 % in respect of this strip. Note 7: 7.1.In the case of those textile products, which are marked in the list by a footnote referring to this Introductory Note, textile trimmings and accessories which do not satisfy the rule set out in the list in column 3 for the made up product concerned may be used provided that their weight does not exceed 10 % of the total weight of all the textile materials incorporated.Textile trimmings and accessories are those classified in Chapters 50 to 63. Linings and interlinings are not to be regarded as trimmings or accessories. 7.2.Any non-textile trimmings and accessories or other materials used which contain textiles do not have to satisfy the conditions set out in column 3 even though they fall outside the scope of Note 4.3. 7.3.In accordance with Note 4.3, any non-originating non-textile trimmings and accessories or other product, which do not contain any textiles, may, anyway, be used freely where they cannot be made from the materials listed in column 3.-For example, if a rule in the list says that for a particular textile item, such as a blouse, yarn must be used this does not prevent the use of metal items, such as buttons, because they cannot be made from textile materials. 7.4.Where a percentage rule applies, the value of trimmings and accessories must be taken into account when calculating the value of the non-originating materials incorporated.

HS Heading No Description of product Working or processing carried out on non-originatingmaterials that confers originating status (1) (2) (3) 0201 Meat of bovine animals, fresh or chilled Manufacture from materials of any heading except meat of bovine animals, frozen of heading No 0202 0202 Meat of bovine animals, frozen Manufacture from materials of any heading except meat of bovine animals, fresh or chilled of heading No 0201 0206 Edible offal of bovine animals, swine, sheep, goats, horses, asses, mules or hinnies, fresh, chilled or frozen Manufacture from materials of any heading except carcases of headings Nos 0201 to 0205 0210 Meat and edible meat offal, salted, in brine, dried or smoked; edible flours and meals of meat or meat offal Manufacture from materials of any heading except meat and offal of heading Nos 0201 to 0206 and 0208 or poultry liver of heading No 0207 0302 to0305 to Fish, other than live fish Manufacture in which all the materials of Chapter 3 used must already be originating (1) (2) (3) ex 0402,0404 to0406 Dairy products Manufacture from materials of any heading except milk or cream of heading No 0401 or 0402 0403 Buttermilk, curdled milk and cream, yogurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit or cocoa Manufacture in which: - all the materials of Chapter 4 used must already be originating, -any fruit juice (except those of pineapple, lime or grapefruit) of heading No 2009 used must be originating, and -the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product 0408 Birds' eggs, not in shell and egg yolks, fresh, dried, cooked, by steaming or by boiling in weter, moulded, frozen or otherwise preserved, whether or not containing added sugar or other sweetening matter Manufacture from materials of any heading except birds' eggs of heading No 0407 ex 0502 Prepared pigs', hogs' or boars' bristles and hair Cleaning, disinfecting, sorting and straightening of bristles and hair ex 0506 Bones and horn-cores unworked Manufacture in which all the materials of Chapter 2 used must already be originating 0710 to0713 Edible vegetables, frozen or dried, provisionally preserved except for heading Nos ex 0710 and ex 0711 Manufacture in which all the vegetable materials used must already be originating ex 0710 Sweet corn (uncooked or cooked by steaming or boiling in water), frozen Manufacture from fresh or chilled sweet corn ex 0711 Sweet corn, provisionally preserved Manufacture from fresh or chilled sweet corn 0811 Fruit and nuts, uncooked or cooked by steaming or boiling in water, frozen, whether or not containing added sugar or other sweetening matter: - Containing added sugar Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the value of the ex-works price of the product - Other Manufacture in which all the fruit or nuts used must already be originating 0812 Fruit and nuts provisionally preserved (for example, by sulphur dioxide gas, in brine, in sulphur water or in other preservative solutions), but unsuitable in that state for immediate consumption Manufacture in which all the fruit or nuts used must already be originating 0813 Fruit, dried, other than that of heading Nos 0801 to 0806; mixtures of nuts or dried fruits of this chapter Manufacture in which all the fruit or nuts used must already be originating 0814 Peel of citrus fruit or melons (including watermelons), fresh, frozen, dried or provisionally preserved in brine, in sulphur water or in other preservative solutions Manufacture in which all the fruit or nuts used must already be originating ex Chapter 11 Products of the milling industry; malt, starches; inulin; whest gluten, except for heading No ex 1106 Manufacture in which all the cereals, edible vegetables, roots and tubers of heading No 0714 or fruit used must already be originating ex 1106 Flour and meal of the dried, shelled leguminous vegetables of heading No 0713 Drying and milling of leguminous vegetables of heading No 0708 1301 Lac; natural gums, resins, gum-resins and balsams Manufacture in which the value of any materials of heading No 1301 used may not exceed 50 % of the ex- works price of the product 1501 Lard; other pig fat and poultry fat, rendered, whether or not pressed or solvent-extracted: - Fats from bones or waste Manufacture from materials of any heading except those of heading Nos 0203, 0206 or 0207 or bones of heading No 0506 - Other Manufacture from meat or edible offal of swine of heading Nos 0203 or 0206 or of meat and edible offal of poultry of heading No 0207 1502 Fats of bovine animals, sheep or goats, raw or rendered, whether or not pressed or solvent-extracted: - Fats from bones or waste Manufacture from materials of any heading except those of heading Nos 0201, 0202, 0204 or 0206 or bones of heading No 0506 - Other Manufacture in which all the animal materials of Chapter 2 used must already be originating 1504 Fats and oils and their fractions, of fish or marine mammals, whether or not refined, but not chemically modified: -Solid fractions of fish oils and fats and oils of marine mammals Manufacture from materials of any heading including other materials of heading No 1504 - Other Manufacture in which all the animal materials of Chapters 2 and 3 used must already be originating ex 1505 Refined lanolin Manufacture from crude wool grease of heading No 1505 1506 Other animal fats and oils and their fractions, whether or not refined, but not chemically modified: - Solid fractions Manufacture from materials of any heading including other materials of heading No 1506 - Other Manufacture in which all the animal materials of Chapter 2 used must already be originating ex1507 to1515 Fixed vegetable oils and their fractions, whether or not refined, but not chemically modified: -Solid fractions, except for that of Jojoba oil Manufacture from other materials of heading Nos 1507 to 1515 ex 1507 to1515(cont'd) -Other, except for: - Lung oil; myrtle wax and Japan wax -Those for technical or industrial uses other than the manufacture of foodstuffs for human Consumption Manufacture in which all the vegetable materials used must already be originating ex 1516 Animal or vegetable fats and oils and their fractions, re-esterified, whether or not refined but not further prepared Manufacture in which all the animal and vegetable materials used must already be originating ex 1517 Edible liquid mixtures of vegetable oils of heading Nos 1507 to 1515 Manufacture in which all the vegetable materials used must already be originating ex 1519 Industrial fatty alcohols having the character of artificial waxes Manufacture from materials of any heading including fatty acids of heading No 1519 1601 Sausages and similar products, of meat, meat offal or blood; food preparations based on these products Manufacture from animals of Chapter 1 1602 Other prepared or preserved meat, meat offal or blood Manufacture from animals of Chapter 1 1603 Extracts and juices of meat, fish or crustaceans, molluscs or other aquatic invertebrates Manufacture from animals of Chapter 1. However, all fish, crustaceans, molluscs or other aquatic invertebrates used must already be originating 1604 Prepared or preserved fish; caviar and caviar substitutes prepared from fish eggs Manufacture in which all the fish or fish eggs used must already be originating 1605 Crustaceans, molluscs and other aquatic invertebrates, prepared or preserved Manufacture in which all the crustaceans, molluscs or other aquatic invertebrates used must already be originating ex 1701 Cane or beet sugar and chemically pure sucrose, in solid form, flavoured or coloured Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product 1702 Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel: -Chemically pure maltose and fructose Manufacture from materials of any heading including other materials of heading No 1702 -Other sugars in solid form, flavoured or coloured Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product - Other Manufacture in which all the materials used must already be originating ex 1703 Molasses resulting from the extraction or refining of sugar, flavoured or coloured Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product 1704 Sugar confectionery (including white chocolate), not containing cocos Manufacture in which all the materials used are classified in a heading other than that of the product, provided the value of any other materials of Chapter 17 used does not exceed 30 % of the ex works price of the product 1806 Chocolate and other food preparations containing cocoa Manufacture in which all the materials used are classified in a heading other than that of the product, provided the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product 1901 Malt extract; food preparations of flour, meal, starch or malt extract, not containing cocoa powder or containing cocoa powder in a proportion by weight of less than 50 %, not elsewhere specified or included; food preparations of goods of heading Nos 0401 to 0404, not containing cocoa powder or containing cocoa powder in a proportion by weight of less than 10 %, not elsewhere specified or included: - Malt extract Manufacture from cereals of Chapter 10 - Other Manufacture in which all the materials used are classified in a heading other than that of the product, provided the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product 1902 Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared Manufacture in which all the cereals (except durum wheat), meat, meat offal, fish, crustaceans or molluscs used must already be originating 1903 Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or in similar forms Manufacture from materials of any heading except potato starch of heading No 1108 1904 Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals, other than maize (corn), in grain form, pre-cooked or otherwise prepared: - Not containing cocoa Manufacture in which: -all the cereals and flour (except maize of the species Zea indurata and durum wheat and their derivatives) used must be wholly obtained, and -the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product - Containing cocoa Manufacture from materials not classified in heading No 1806, provided the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product 1905 Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products Manufacture from materials of any heading, except those of Chapter 11 2001 Vegetables, fruit nuts and other edible parts of plants, prepared or preserved by vinegar or acetic acid Manufacture in which all the fruit, nuts or vegetables used must already be originating 2002 Tomatoes prepared or preserved otherwise than by vinegar or acetic acid Manufacture in which all the tomatoes used must already be originating 2003 Mushrooms and truffles, prepared or preserved otherwise than by vinegar or acetic acid Manufacture in which all the mushrooms or truffles used must already be originating 2004 and2005 Other vegetables prepared or preserved otherwise than by vinegar or acetic acid, frozen or not frozen Manufacture in which all the vegetables used must already be originating 2006 Fruit, nuts, fruit-peel and other parts of plants, preserved by sugar (drained, glacé or crystallized) Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product 2007 Jams, fruit jellies, marmalades, fruit or nut purée and fruit or nut pastes, being cooked preparations, whether or not containing added sugar or other sweetening matter Manufacture in which the value of any materials of Chapter 17 used must not exceed 30 % of the ex works price of the product 2008 Fruit, nuts and other edible parts of plants otherwise prepared or preserved, whether or not containing added sugar or other sweetening matter or spirit, not elsewhere specified or included: -Fruit and nuts cooked otherwise than by steaming or boiling in water, not containing added sugar, frozen Manufacture in which all the fruit and nuts used must already be originating -Nuts, not containing added sugar or spirits Manufacture in which the value of the originating nuts and oil seeds of heading Nos 0801, 0802 and 1202 to 1207 used exceeds 60 % of the ex works price of the product - Other Manufacture in which all the materials used are classified in a heading other than that of the product, provided the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product ex 2009 Fruit juices (including grape must), unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter Manufacture in which all the materials used are classified in a heading other than that of the product, provided the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product ex 2101 Roasted chicory and extracts, essences and concentrates thereof Manufacture in which all the chicory used must already be originating ex 2103 -Sauces and preparations therefor; mixed condiments and mixed seasonings Manufacture in which all the materials used are classified in a heading other than that of the product. However, mustard flour or meal or prepared mustard may be used -Prepared mustard Manufacture from mustard flour or meal ex 2104 -Soups and broths and preparations therefor Manufacture from materials of any heading, except prepared or preserved vegetables of heading Nos 2002 to 2005 -Homogenized composite food preparations The rule for the heading in which the product would be classified in bulk shall apply ex 2106 Sugar syrups, flavoured or coloured Manufacture in which the value of any materials of Chapter 17 used must not exceed 30 % of the ex works price of the product 2201 Waters, including natural or artificial mineral waters and aerated waters, not containing added sugar or other sweetening matter nor flavoured; ice and snow Manufacture in which all the water used must already be originating 2202 Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcohlic beverages, not including fruit or vegetable juices of heading No 2009 Manufacture in which all the materials used are classified in a heading other than that of the product, provided the value of any materials of Chapter 17 used does not exceed 30 % of the ex works price of the product and any fruit juice used (except for pineapple, lime and grapefruit juices) must already be originating ex 2204 Wine of fresh grapes, including fortified wines, and grape must with the addition of alcohol Manufacture from other grape must 2205 ex 2207,ex 2208 andex 2209 The following, containing grape materials: vermouth and other wine of fresh grapes flavoured with plants or aromatic substances; ethyl alcohol and other spirits, denatured or not; spirits, liqueurs and other spirituous beverages; compound alcoholic preparations of a kind used for the manufacture of beverages; vinegar Manufacture from materials of any heading, except grapes or any material derived from grapes ex 2208 Whiskies of an alcoholic strength by volume of less than 50 % vol. Manufacture in which the value of any cereal based spirits used does not exceed 15 % of the ex works price of the product ex 2303 Residues from the manufacture of starch from maize (excluding concentrated steeping liquors), of a protein content, calculated on the dry product, exceeding 40 % by weight Manufacture in which all the maize used must already be originating ex 2306 Oil cake and other solid residues resulting from the extraction of olive oil, containing more than 3 % of olive oil Manufacture in which all the olives used must already be originating 2309 Preparations of a kind used in animal feeding Manufacture in which all the cereals, sugar or molasses, must or milk used must already be originating 2402 Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes Manufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading No 2401 used must already be originating ex 2403 Smoking tobacco Manufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading No 2401 used must already be originating ex 2504 Natural crystalline graphite, with enriched carbon content, purified and ground Enriching of the carbon content, purifying and grinding of crude crystalline graphite ex 2515 Marble, merely cut by sawing or otherwise into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm Cutting, by sawing or otherwise, of marble (even if already sawn) of a thickness exceeding 25 cm ex 2516 Granite porphyry, basalt, sandstone and other monumental and building stones, merely cut by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm Cutting, by sawing or otherwise, of stones (even if already sawn) of a thickness exceeding 25 cm ex 2518 Calcined dolomite Calcination of dolomite not calcined (1) (2) (3) ex 2519 Crushed natural magnesium carbonate (magnesite), in hermetically sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia Manufacture in which all the materials used are classified in a heading other than that of the product. However, natural magnesium carbonate (magnesite) may be used ex 2520 Plasters specially prepared for dentistry Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product ex 2524 Natural asbestos fibres Manufacture from asbestos concentrate ex 2525 Mica powder Grinding of mica or mica waste ex 2530 Earth colours, calcined or powdered Calcination or grinding of earth colours ex 2707 Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250 °C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels These are Annex II products 2709to2715 Mineral oils and products of their distillation; bituminous substances; mineral waxes These are Annex II products ex Chapter 28 Inorganic chemicals; organic or inorganic compounds of precious metals, of rare earth metals, of radioactive elements or of isotopes; except for heading Nos ex 2811 and ex 2833 for which the rules are set out below Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product ex 2811 Sulphur trioxide Manufacture from sulphur dioxide ex 2833 Aluminium sulphate Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product ex Chapter 29 Organic chemicals, except for heading Nos ex 2901, ex 2902, ex 2905, 2915, ex 2932, 2933 and 2934, for which the position is set out below Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product ex 2901 Acyclic hydrocarbons for use as power or heating fuels These are Annex II products ex 2902 Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuels These are Annex II products ex 2905 Metal alcoholates of alcohols of this heading and of ethanol or glycerol Manufacture from materials of any heading, including other materials of heading No 2905. However, metal alcoholates of this heading may be used, provided their value does not exceed 20 % of the ex works price of the product 2915 Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives Manufacture from materials of any heading. However, the value of all the materials of heading Nos 2915 and 2916 used may not exceed 20 % of the ex works price of the product ex 2932 - Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivates Manufacture from materials of any heading. However, the value of all the materials of heading No 2909 used may not exceed 20 % of the ex works price of the product (1) (2) (3) ex 2932(cont'd) - Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivates Manufacture from materials of any heading 2933 Heterocyclic compounds with nitrogen hetero-atom(s) only; nucleic acids and their salts: Manufacture from materials of any heading. However, the value of all the materials of heading Nos 2932 and 2933 used may not exceed 20 % of the ex works price of the product 2934 Other heterocyclic compounds Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product ex Chapter 30 Pharmaceutical products, except for heading Nos 3002, 3003 and 3004, for which the rules are set out below Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product 3002 Human blood; animal blood prepared for therapeutic, prophylactic or diagnostic uses; antisera and other blood fractions; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products: -Products consisting of two or more constituents which have been mixed together for therapeutic or prophylactic uses or unmixed products for these uses, put up in measured doses or in forms or packings for retail sale Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20 % of the ex works price of the product - Other: - Human blood Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20 % of the ex works price of the product - Animal blood prepared for therapeutic or prophylactic uses Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20 % of the ex works price of the product -Blood fractions other than antisera, haemoglobin and serum globulin Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20 % of the ex works price of the product -Haemoglobin, blood globulin and serum globulin Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20 % of the ex works price of the product - Other Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20 % of the ex works price of the product (1) (2) (3) ex 3003and3004 Medicaments (excluding goods of heading Nos 3002, 3005 or 3006) Manufacture in which: - all the materials used are classified within a heading other than that of the product. However, materials of heading No 3003 or 3004 may be used provided their value, taken together, does not exceed 20 % of the ex works price of the product, and - the value of all the materials used does not exceed 50 % of the ex works price of the product ex Chapter 31 Fertilizers except for heading No ex 3105 for which the rule is set out below Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product ex 3105 Mineral or chemical fertilizers containing two or three of the fertilizing elements nitrogen, phosphorus and potassium; other fertilizers; goods of this chapter, in tablets or similar forms or in packages of a gross weight not exceeding 10 kg, except for: - Sodium nitrate- Calcium cyanamide- Potassium sulphate- Magnesium potassium sulphate Manufacture in which: -all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product ex Chapter 32 Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks; except for heading Nos ex 3201 and 3205, for which the rules are set out below Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product ex 3201 Tannins and their salts, ethers, esters and other derivatives Manufacture from tanning extracts of vegetable origin 3205 Colour lakes; preparations as specified in note 3 to this chapter based on colour lakes (1) Manufacture from materials of any heading, except heading Nos 3202 and 3204 provided the value of any materials classified in heading No 3205 does not exceed 20 % of the ex works price of the product ex Chapter 33 Essential oils and resinoids; perfumery, cosmetic or toilet preparations; except for heading No 3301, for which the rule is set out below Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product 3301 Essential oils (terpeneless or not), including concretes and absolutes; resinoids; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils Manufacture from materials of any heading, including materials of a different 'group' (2) within this heading. However, materials of the same group may be used, provided their value does not exceed 20 % of the ex works price of the product

(1) (2) (3) ex Chapter 34 Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, 'dental waxes' and dental preparations with a basis of plaster; except for heading Nos ex 3403 and 3404, for which the position is set out below Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product ex 3403 Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, provided they represent less than 70 % by weight These are Annex II products ex 3404 Artificial waxes and prepared waxes: - With a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax These are Annex II products - Other Manufacture from materials of any heading, except: - hydrogenated oils having the character of waxes of heading No 1516 -fatty acids not chemically defined or industrial fatty alcohols having the character of waxes of heading No 1519 -materials of heading No 3404. However, these materials may be used provided their value does not exceed 20 % of the ex works price of the product ex Chapter 35 Albuminoidal substances; modified starches; glues; enzymes; except for heading Nos 3505 and ex 3507 for which the rules are set out below Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product 3505 Dextrins and other modified starches (for example, pregelatinized or esterified starches); glues based on starches, or on dextrins or other modified starches: - Starch ethers and esters Manufacture from materials of any heading, including other materials of heading No 3505 - Other Manufacture from materials of any heading, except those of heading No 1108 ex 3507 Prepared enzymes not elsewhere specified or included Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product Chapter 36 Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product ex Chapter 37 Photographic or cinematographic goods; except for heading Nos 3701, 3702 and 3704 for which the rules are set out below Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product (1) (2) (3) ex 3701 Photographic plates and film in the flat, sensitized, unexposed, of any material other than paper, paperboard or textiles; instant print film in the flat, sensitized, unexposed, whether or not in packs Manufacture in which all the materials used are classified in a heading other than heading No 3702 3702 Photographic film in rolls, sensitized, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitized, unexposed Manufacture in which all the materials used are classified within a heading other than heading No 3701 or 3702 3704 Photographic plates, film, paper, paperboard and textiles, exposed but not developed Manufacture in which all the materials used are classified within a heading other than heading Nos 3701 to 3704 ex Chapter 38 Miscellaneous chemical products; except for heading Nos ex 3801, ex 3803, ex 3805, ex 3806, ex 3807, 3808 to 3814, 3818 to 3820, 3822 and 3823 for which the rules are set out below: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product ex 3801 - Colloidal graphite in suspension in oil and semicolloidal graphite; carbonaceous pastes for electrodes Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product -Graphite in paste form, being a mixture of more than 30 % by weight of graphite with mineral oils Manufacture from materials of any heading. However, the value of the materials of heading No 3403 used must not exceed 20 % of the ex works price of the product ex 3803 Refined tall oil Refining of crude tall oil ex 3805 Spirits of sulphate turpentine, purified Purification by distillation or refining of raw spirits of sulphate turpentine ex 3806 Ester gums Manufacture from resin acids ex 3807 Wood pitch (wood tar pitch) Distillation of wood tar 3808to38143818to38203822and Miscellaneous chemical products: -Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals, of heading No 3811 These are Annex II products 3823 -The following of heading No 3823: - Prepared binders for foundry moulds or cores based on natural resinous products -Naphthenic acids, their water insoluble salts and their esters -Sorbitol other than that of heading No 2905 -Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts -Ion exchangers -Getters for vacuum tubes -Alkaline iron oxide for the purification of gas Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex works price of the product (1) (2) (3) ex 3808to38143818to38203822and3823(cont'd) - - Ammoniacal gas liquors and spent oxide produced in coal gas purification -Sulphonaphthenic acids, their water insoluble salts and their esters -Fusel oil and Dippel's oil -Mixtures of salts having different anions -Copying pastes with a basis of gelatin, whether or not on a paper or textile backing -Other Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product 3901to3915 Plastics in primary forms, waste, parings and scrap, of plastic: - Addition homopolymerization products Manufacture in which: -the value of all the materials used does not exceed 50 % of the ex works price of the product, and -the value of any materials of Chapter 39 used does not exceed 20 % of the ex works price of the product (3) - Other Manufacturing in which the value of the materials of Chapter 39 used does not exceed 20 % of the ex works price of the product (4) 3916to3921 Semi-manufactures of plastics: - Flat products, further worked than only surface-worked or cut into forms other than rectangles; other products, further worked than only surface-worked Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex works price of the product - Other: -Addition homopolymerization products Manufacture in which: -the value of all the materials used does not exceed 50 % of the ex works price of the product, and -the value of any materials of Chapter 39 used does not exceed 20 % of the ex works price of the product (5) -Other Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex works price of the product (6) 3922to3926 Articles of plastic Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product ex 4001 Laminated slabs of crepe rubber for shoes Lamination of sheets of natural rubber 4005 Compounded rubber, unvulcanized, in primary forms or in plates, sheets or strip Manufacture in which the value of all the materials used, except natural rubber, does not exceed 50 % of the ex works price of the product 4012 Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, interchangeable tyre treads and tyre flaps of rubber Manufacture from materials of any heading, except those of heading Nos 4011 or 4012 ex 4017 Articles of hard rubber Manufacture from hard rubber

(1) (2) (3) ex 4102 Raw skins of sheep or lambs, without wool on Removal of wool from sheep or lamb skins, with wool on 4104to4107 Leather, without hair or wool other than leather of heading No 4108 or 4109 Retanning of pre-tanned leatherorManufacture in which all the materials used are classified in a heading other than that of the product 4109 Patent leather and patent laminated leather; metallized leather Manufacture from leather of heading Nos 4104 to 4107 provided its value does not exceed 50 % of the ex works price of the product ex 4302 Tanned or dressed furskins, assembled: - Plates, crosses and similar forms Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins - Other Manufacture from non-assembled, tanned or dressed furskins (7) 4303 Articles of apparel, clothing accessories and other articles of furskin Manufacture from non-assembled, tanned or dressed furskins, of heading No 4302 (8) ex 4403 Wood roughly squared Manufacture from wood in the rough, whether or not stripped of its bark or merely roughed down ex 4407 Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or finger-jointed Planing, sanding or finger-jointing ex 4408 Veneer sheets and sheets for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled, of a thickness not exceeding 6 mm, planed, sanded or finger-jointed Splicing, planing, sanding or finger-jointing ex 4409 - Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges or faces, sanded or finger-jointed Sanding or finger-jointing - Beadings and mouldings Beading or moulding ex4410toex4413 Beadings and mouldings, including moulded skirting and other moulded boards Beading or moulding ex4415 Packing cases, boxes, crates, drums and similar packings, of wood Manufacture from boards not cut to size ex4416 Casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood Manufacture from riven staves, not further worked than sawn on the two principal surfaces ex 4418 - Builders' joinery and carpentry of wood Manufacture in which all the materials used are classified within a heading other than that of the product. However, cellular wood panels, shingles and shales may be used -Beadings and mouldings Beading or moulding ex 4421 Match splints; wooden pegs or pins for footwear Manufacture from wood of any heading except drawn wood of heading No 4409

(1) (2) (3) ex 4503 Articles of natural cork Manufacture from cork of heading No 4501 ex 4811 Paper and paperboard, ruled, lined or squared only Manufacture from paper-making materials of Chapter 47 4816 Carbon paper, self-copy paper and other copying or transfer papers (other than those of heading No 4809), duplicator stencils and offset plates, of paper, whether or not put up in boxes Manufacture from paper-making materials of Chapter 47 4817 Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery Manufacture in which: - all the materials used are classified within a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product ex 4818 Toilet paper Manufacture from paper-making materials of Chapter 47 ex 4819 Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres Manufacture in which: -all the materials used are classified within a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product ex 4820 Letter pads Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product ex 4823 Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape Manufacture from paper-making materials of Chapter 47 4909 Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings Manufacture from materials not classified within heading No 4909 or 4911 4910 Calendars of any kind, printed, including calendar blocks: - Calenders of the 'perpetual' type or with replaceable blocks mounted on bases other than paper or paperboard Manufacture in which: -all the materials used are classified within a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product - Other Manufacture from materials not classified within heading No 4909 or 4911 ex 5003 Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock), carded or combed Carding or combing of silk waste 5501to5507 Man-made staple fibres Manufacture from chemical materials or textile pulp exChapter 50toChapter 55 Yarn, monofilament and thread Manufacture from (9): - natural fibres not carded or combed or otherwise processed for spinning, -chemical materials or textile pulp, or -paper-making materials