Council regulation (EEC) No 2229/89 of 18 July 1989 on the application of Decision No 1/89 of the EEC-Malta Association Council amending, as a result of the introduction of the harmonized system, Protocol No 2 concerning the definition of the concept of 'originating products' and methods of administrative cooperation

(1) (2) (3) ex Chapter 50toChapter 55 Woven fabrics: - Incorporating rubber thread Manufacture from single yarn (10) - Other Manufacture from (11): - coir yarn, -natural fibres, -man-made staple fibres not carded or combed or otherwise processed for spinning, -chemical materials or textile pulp, or -paper or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex works price of the product ex Chapter 56 Wadding, felt and non-wovens; special yarns, twine cordage, ropes and cables and articles thereof except for heading Nos 5602, 5604, 5605 and 5606, for which the rules are set out below Manufacture from (12): - coir yarn, - natural fibres, - chemical materials or textile pulp, or -paper-making materials 5602 Felt, whether or not impregnated, coated, covered or laminated: - Needleloom felt Manufacture from (13): - natural fibres, -chemical materials or textile pulp However: -polypropylene filament of heading No 5402, -polypropylene fibres of heading No 5503 or 5506, or -polypropylene filament tow of heading No 5501, of which the denomination in all cases of a single filament or fibre is less than 9 decitex may be used provided that their value does not exceed 40 % of the ex works price of the product - Other Manufacture from (14): - natural fibres, - man-made staple fibres made from casein, or -chemical materials or textile pulp 5604 Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading No 5404 or 5405, impregnated, coated, covered or sheathed with rubber or plastics: -Rubber thread and cord, textile covered Manufacture from rubber thread or cord, not textile covered

(1) (2) (3) ex 5604(cont'd) - Other Manufacture from (15): - natural fibres not carded or combed or otherwise processed for spinning, -chemical materials or textile pulp, or -paper-making materials 5605 Metallized yarn, whether or not gimped, being textile yarn, or strip or the like of heading No 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal Manufacture from (16): -natural fibres, -man-made staple fibres not carded or combed or otherwise processed for spinning, -chemical materials or textile pulp, or -paper-making materials 5606 Gimped yarn, and strip and the like of heading No 5404 or 5405, gimped (other then those of heading No 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn Manufacture from (17): -natural fibres, -man-made staple fibres not carded or combed or otherwise processed for spinning, -chemical materials or textile pulp, or -paper-making materials Chapter 57 Carpets and other textile floor coverings: - Of needleloom felt Manufacture from (18): -natural fibres, or -chemical materials or textile pulp. However: -polypropylene filament of heading No 5402, -polypropylene fibres of heading No 5503 or 5506, or -polypropylene filament tow of heading No 5501 of which the denomination in all cases of a single filament or fibre is less than 9 decitex may be used provided that their value does not exceed 40 % of the ex works price of the product - Of other felt Manufacture from (19): -natural fibres not carded or combed or otherwise processed for spinning, or -chemical materials or textile pulp -Other Manufacture from (20): -coir yarn, -synthetic or artificial filament yarn, -natural fibres, or -man-made staple fibres not carded or combed or otherwise processed for spinning

(1) (2) (3) ex Chapter 58 Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings, embroidery, except for heading Nos 5805 and 5810; the rule for heading No 5810 is set out below: - Combined with rubber thread Manufacture from single yarn (21) - Other Manufacture from (22): -natural fibres, -man-made staple fibres not carded or combed or otherwise processed for spinning, or -chemical materials or textile pulp or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex works price of the product 5810 Embroidery in the piece, in strips or in motifs Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product 5901 Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations Manufacture from yarn 5902 Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon: -Containing not more than 90 % by weight of textile materials Manufacture from yarn - Other Manufacture from chemical materials or textile pulp 5903 Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading No 5902 Manufacture from yarn 5904 Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape Manufacture from yarn (23) 5905 Textile wall coverings: -Impregnated, coated, covered or laminated with rubber, plastics or other materials Manufacture from yarn

(1) (2) (3) ex 5905(cont'd) - Other Manufacture from (24): - coir yarn, -natural fibres, -man-made staple fibres not carded or combed or otherwise processed for spinning, or -chemical materials or textile pulp or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex works price of the product 5906 Rubberized textile fabrics, other than those of heading No 5902: -Knitted or crocheted fabrics Manufacture from (25): -natural fibres, -man-made staple fibres not carded or combed or otherwise processed for spinning, or -chemical materials or textile pulp -Other fabrics made of synthetic filament yarn, containing more than 90 % by weight of textile materials Manufacture from chemical materials - Other Manufacture from yarn 5907 Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio backcloths or the like Manufacture from yarn ex 5908 Incandescent gas mantles, impregnated Manufacture from tubular knitted gas mantle fabric 5909to5911 Textile articles of a kind suitable for industrial use: -Polishing discs or rings other than of felt of heading No 5911 Manufacture from yarn or waste fabrics or rags of heading No 6310 - Other Manufacture from (26): -coir yarn, -natural fibres, -man-made staple fibres not carded or combed or otherwise processed for spinning, or -chemical materials or textile pulp Chapter 60 Knitted or crocheted fabrics Manufacture from (27): - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or -chemical materials or textile pulp (1) (2) (3) ex Chapter 61 Articles of apparel and clothing accessories, knitted or crocheted: - Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form Manufacture from yarn (28) - Other Manufacture from (29): -natural fibres, -man-made staple fibres not carded or combed or otherwise processed for spinning, or -chemical materials or textile pulp ex Chapter 62 Articles of apparel and clothing accessories, not knitted or crocheted, except for heading Nos ex 6202, ex 6204, ex 6206, ex 6209, ex 6210, 6213, 6214, ex 6216 and ex 6217 for which the rules are set out below Manufacture from yarn (30) ex6202ex6204ex6206ex6209andex6217 Women's, girls' and babies' clothing and 'other made-up clothing accessories', embroidered Manufacture from yarn (31) or Manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40 % of the ex works price of the product (32) ex6210ex6216andex6217 Fire-resistant equipment of fabric covered with foil of aluminized polyester Manufacture from yarn (33) or Manufacture from uncoated fabric provided the value of the uncoated fabric used does not exceed 40 % of the ex works price of the product (34) 6213and6214 Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like: -Embroidered Manufacture from unbleached single yarn (35) (36) or Manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40 % of the ex works price of the product (37) - Other Manufacture from unbleached single yarn (38) (39) 6301to6304 Blankets, travelling rugs, bed linen etc.; curtains, etc.; other furnishing articles: - Of felt, of non-wovens Manufacture from (40): - natural fibres, or - chemical materials or textile pulp - Other: - Embroidered Manufacture from unbleached single yarn (41) or Manufacture from unembroidered fabric (other than knitted or crocheted) provided the value of the unembroidered fabric used does not exceed 40 % of the ex works price of the product - Other Manufacture from unbleached single yarn (42) (1) (2) (3) ex 6305 Sacks and bags, of a kind used for the packing of goods Manufacture from (43): - natural fibres, -man-made staple fibres not carded or combed or otherwise processed for spinning, or -chemical materials or textile pulp 6306 Tarpaulins, sails for boats, sailboards or landcraft, awnings, sunblinds, tents and camping goods: -Of non-wovens Manufacture from (44): -natural fibres, or -chemical materials or textile pulp -Other Manufacture from unbleached single yarn ex 6307 Other made-up articles, including dress patterns Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product (45) 6308 Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes or similar textile articles, put up in packings for retail sale Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated provided their total value does not exceed 15 % of the ex works price of the set 6401to6405 Footwear Manufacture from materials of any heading except for assemblies of uppers affixed to inner soles or to other sole components of heading No 6406 6503 Felt hats and other felt headgear, made from the hat bodies, hoods or plateaux of heading No 6501, whether or not lined or trimmed Manufacture from yarn or textile fibres (46) 6505 Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hair-nets of any material, whether or not lined or trimmed Manufacture from yarn or textile fibres (47) 6601 Umbrellas and sun umbrellas (including walking-stick umbrellas, garden umbrellas and similar umbrellas) Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product ex 6803 Articles of slate or of agglomerated slate Manufacture from worked slate ex6812 Articles of asbestos or of mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate Manufacture from fabricated asbestos fibres or from mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate ex6814 Articles of mica; including agglomerated or reconstituted mica on a support of paper, paperboard or other materials Manufacture from worked mica (including agglomerated or reconstituted mica) ex 7006 Glass of heading No 7003, 7004 or 7005, bent, edge-worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials Manufacture from materials of heading No 7001 (1) (2) (3) ex 7007 Safety glass, consisting of toughened (tempered) or laminated glass Manufacture from materials of heading No 7001 7008 Multiple-walled insulating units of glass Manufacture from materials of heading No 7001 7009 Glass mirrors, whether or not framed, including rear-view mirrors Manufacture from materials of heading No 7001 7010 Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass Manufacture in which all the materials used are classified within a heading other than that of the product or Cutting of glassware, provided the value of the uncut glassware does not exceed 50 % of the ex works price of the product 7013 Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading No 7010 or 7018) Manufacture in which all the materials used are classified within a heading other than that of the product and Cutting of glassware, provided the value of the uncut glassware does not exceed 50 % of the ex works price of the product or Hand-decoration (with the exception of silk screen printing) of hand-blown glassware, provided the value of the hand-blown glassware does not exceed 50 % of the ex works price of the product ex 7019 Articles (other than yarn) of glass fibres Manufacture from: - uncoloured slivers, rovings, yarn or chopped strands, or -glass wool ex 7102ex7103andex7104 Worked precious or semi-precious stones (natural, synthetic or reconstructed) Manufacture from unworked precious or semi-precious stones 71067108and7110 Precious metals: -Unwrought Manufacture from materials not classified in heading No 7106, 7108 or 7110 or Electrolytic, thermal or chemical separation of precious metals of heading No 7106, 7108 or 7110 or Alloying of precious metals of heading No 7106, 7108 or 7110 with each other or with base metals -Semi-manufactured or in powder form (All) Manufacture from unwrought precious metals ex 7107ex7109andex7111 Metals clad with precious metals, semi-manufactured Manufacture from metals clad with precious metals, unwrought ex 7116 Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed) Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product ex 7117 Imitation jewellery Manufacture in which all the materials used are classified within a heading other than that of the product or Manufacture from base metal parts, not plated or covered with precious metals, provided the value of all the materials used does not exceed 50 % of the ex works price of the product (1) (2) (3) ex 7207 Semi-finished products of iron or non-alloy steel Manufacture from materials of heading No 7201, 7202, 7203, 7204 or 7205 7208to7216 Flat-rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steel Manufacture from ingots or other primary forms of heading No 7206 7217 Wire of iron or non-alloy steel Manufacture from semi-finished materials of heading No 7207 ex72187219to7222 Semi-finished products, flat-rolled products, bars and rods, angles, shapes and sections of stainless steel Manufacture from ingots or other primary forms of heading No 7218 7223 Wire of stainless steel Manufacture from semi-finished materials of heading No 7218 ex72247225to7227 Semi-finished products, flat-rolled products, bars and rods, in irregularly wound coils, of other alloy steel Manufacture from ingots or other primary forms of heading No 7224 7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel Manufacture from ingots or other primary forms of heading No 7206, 7218 or 7224 7229 Wire of other alloy steel Manufacture from semi-finished materials of heading No 7224 ex 7301 Sheet piling Manufacture from materials of heading No 7206 7302 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fishplates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails Manufacture from materials of heading No 7206 73047305and7306 Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel Manufacture from materials of heading No 7206, 7207, 7218 or 7224 7308 Structures (excluding prefabricated buildings of heading No 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel Manufacture in which all the materials used are classified within a heading other than that of the product. However, welded angles, shapes and sections of heading No 7301 may not be used ex 7315 Skid-chains Manufacture in which the value of all the materials of heading No 7315 used does not exceed 50 % of the ex works price of the product ex 7322 Radiators for central heating, not electrically heated Manufacture in which the value of all the materials of heading No 7322 used does not exceed 5 % of the ex works price of the product (1) (2) (3) ex Chapter 74 Copper and articles thereof, except for heading Nos 7401 to 7405; the rule for heading No ex 7403 is set out below Manufacture in which: - all the materials used are classified within a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product ex 7403 Copper alloys, unwrought Manufacture from refined copper, unwrought, or waste and scrap ex Chapter 75 Nickel and articles thereof, except for heading Nos 7501 to 7503; Manufacture in which: -all the materials used are classified within a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product ex Chapter 76 Aluminium and articles thereof, except for heading Nos 7601 and 7602; the rules for heading Nos ex 7601 and ex 7616 are set out below Manufacture in which -all the materials used are classified within a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product ex 7601 -Aluminium alloys Manufacture from aluminium, not alloyed, or waste and scrap -'Super-pure' aluminium (ISO No Al 99.99) Manufacture from aluminium, not alloyed (ISO No Al 99.8) ex 7616 Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium Manufacture in which: -all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used, and -the value of all the materials used does not exceed 50 % of the ex works price of the product ex Chapter 78 Lead and articles thereof, except for heading Nos 7801 and 7802; the rule for heading No 7801 is set out below Manufacture in which: -all the materials used are classified within a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product ex 7801 Unwrought lead: - Refined lead Manufacture from 'bullion' or 'work' lead - Other Manufacture in which all the materials used are classified in a heading other than that of the product. However, waste and scrap of heading No 7802 may not be used (1) (2) (3) ex Chapter 79 Zinc and articles thereof, except for heading Nos 7901 and 7902; the rule for heading No 7901 is set out below Manufacture in which: - all the materials used are classified in a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product 7901 Unwrought zinc Manufacture in which all the materials used are classified in a heading other than that of the product. However, waste and scrap of heading No 7902 may not be used ex Chapter 80 Tin and articles thereof, except for heading Nos 8001, 8002 and 8007; the rule for heading No 8001 is set out below Manufacture in which: -all the materials used are classified in a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product 8001 Unwrought tin Manufacture in which all the materials used are classified in a heading other than that of the product. However, waste and scrap of heading No 8002 may not be used ex Chapter 81 Other base metals, wrought; articles thereof Manufacture in which the value of all the materials classified in the same heading as the products used does not exceed 50 % of the ex works price of the product 8206 Tools of two or more of the heading Nos 8202 to 8205, put up in sets for retail sale Manufacture in which all the materials used are classified in a heading other than heading Nos 8202 to 8205. However, tools of heading Nos 8202 to 8205 may be incorporated into the set provided their value does not exceed 15 % of the ex works price of the set 8207 Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools Manufacture in which: -all the materials used are classified in a heading other than that of the product, and -the value of all the materials used does not exceed 40 % of the ex works price of the product 8208 Knives and cutting blades, for machines or for mechanical appliances Manufacture in which: -all the materials used are classified in a heading other than that of the product, and -the value of all the materials used does not exceed 40 % of the ex works price of the product (1) (2) (3)

ex 8211 Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading No 8208 Manufacture in which all the materials used are classified in a heading other than that of the product. However, knife blades and handles of base metal may be used 8214 Other articles of cutlery (for example, hair clippers, butcher's or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files) Manufacture in which all the materials used are classified in a heading other than that of the product. However, handles of base metal may be used 8215 Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware Manufacture in which all the materials used are classified in a heading other than that of the product. However, handles of base metal may be used ex 8306 Statuettes and other ornaments, of base metal Manufacture in which all the materials used are classified in a heading other than that of the product. However, the other materials of heading No 8306 may be used provided their value does not exceed 30 % of the ex works price of the product exChapter 84 Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for those falling within the following headings or parts of headings for which the rules are set out below: 8402, 8403, ex 8404, 8406 to 8409, 8411, 8412, ex 8413, ex 8414, 8415, 8418, ex 8419, 8420, 8423, 8425 to 8430, ex 8431, 8439, 8441, 8444 to 8447, ex 8448, 8452, 8456 to 8466, 8469 to 8472, 8480, 8482, 8484 and 8485 Manufacture: - in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 8403andex8404 Central heating boilers, other than those of heading No 8402, and auxiliary plant for central heating boilers Manufacture in which all the materials used are classified in a heading other than heading No 8403 or 8404. However, materials which are classified in heading No 8403 or 8404 may be used provided their value, taken together, does not exceed 5 % of the ex works price of the product 8406 Steam turbines and other vapour turbines Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8407 Spark-ignition reciprocating or rotary internal combustion piston engines Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8408 Compression-ignition internal combustion piston engines (diesel or semi-diesel engines) Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8409 Parts suitable for use solely or principally with the engines of heading No 8407 or 8408 Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8412 Other engines and motors Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8415 Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be seperately regulated Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8418 Refrigerators, freezers and other refrigerating or freezing equipment, electric or other heat pumps other than air conditioning machines of heading No 8415 Manufacture: - in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product, and -where the value of all the non-originating materials used does not exceed the value of the originating materials used ex 8419 Machines for the wood, paper pulp and paper board industries Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex works price of the product 8420 Calendering or other rolling machines, other than for metals or glass, and cylinders therefor Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex works price of the product 8425to8428 Lifting, handling, loading or unloading machinery Manufacture: - in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified in heading No 8431 are only used up to a value of 5 % of the ex works price of the product 8429 Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, temping machines and road rollers: - Road rollers Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product - Other Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the value of the materials classified within heading No 8431 are only used up to a value of 5 % of the ex works price of the product 8430 Other moving, grading, levelling, scraping, excavating, temping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow- blowers Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the value of the materials classified within heading No 8431 are only used up to value of 5 % of the ex works price of the product ex8431 Parts for road rollers Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8439 Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex works price of the product 8441 Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex works price of the product 8444to8447 Machines of these headings for use in the textile industry Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product ex8448 Auxiliary machinery for use with machines for heading Nos 8444 and 8445 Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8452 Sewing machines, other than book sewing machines of heading No 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles: -Sewing machines (lock stitch only) with heads of a weight not exceeding 16 kg without motor or 17 kg with motor Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all of the non-originating materials used in assembling the head (without motor) does not exceed the value of the originating materials used, and -the thread tension, crochet and zigzag mechanisms used are already originating - Other Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8456to8466 Machine-tools and machines and their parts and accessories of heading Nos 8456 to 8466 Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8469to8472 Office machines (for example, typewriters, calculating machines, automatic data-processing machines, duplicating machines, stapling machines) Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8480 Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product 8484 Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8485 Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this chapter Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product exChapter 85 Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers and parts and accessories of such articles; except for those falling within the following headings or parts of headings for which the rules are set out below: 8501, 8502, ex 8518, 8519 to 8529, 8535 to 8537, ex 8541, 8542, 8544 to 8548 Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 8501 Electric motors and generators (excluding generating sets) Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within heading No 8503 are only used up to a value of 5 % of the ex works price of the product 8502 Electric generating sets and rotary converters Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within heading No 8501 or 8503, taken together, are only used up to a value of 5 % of the ex works price of the product ex8518 Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; audio-frequency electric amplifiers; electric sound amplifier sets Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all the non-originating materials used does not exceed the value of the originating materials used, and -the value of all the transistors of heading No 8541 used does not exceed 3 % of the ex works price of the product 8519 Turntables (record-decks), record-players, cassette-players and other sound reproducing apparatus, not incorporating a sound recording device Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all the non-originating materials used does not exceed the value of the originating materials used, and -the value of all the transistors of heading No 8541 used does not exceed 3 % of the ex works price of the product 8520 Magnetic tape recorders and other sound recording apparatus, whether or not incorporating a sound reproducing device Manufacture: - in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all the non-originating materials used does not exceed the value of the originating materials used, and, -the value of all the transistors of heading No 8541 used does not exceed 3 % of the ex works price of the product 8521 Video recording or reproducing apparatus Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all the non-originating materials used does not exceed the value of the originating materials used, and -the value of all the transistors of heading No 8541 used does not exceed 3 % of the ex works price of the product 8522 Parts and accessories of apparatus of heading Nos 8519 to 8521 Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8523 Prepared unrecorded media for sound recording or similar recording of other phenomena, other than products of Chapter 37 Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8524 Records, tapes and other recorded media for sound or other similarly recorded phenomena, including matrices and masters for the production of records, but excluding products of Chapter 37: -Matrices and masters for the production of records Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product - Other Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within heading No 8523 are only used up to a value of 5 % of the ex works price of the product 8525 Transmission apparatus for radio-telephony, radio-telegraphy, radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all the non-originating materials used does not exceed the value of the originating materials used, and -the value of all the transistors of heading No 8541 used does not exceed 3 % of the ex works price of the product 8526 Radar apparatus, radio navigational aid apparatus and radio remote control apparatus Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all the non-originating materials used does not exceed the value of the originating materials used, and -the value of all the transistors of heading No 8541 used does not exceed 3 % of the ex works price of the product 8527 Reception apparatus for radio-telephony, radio-telegraphy or radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all the non-originating materials used does not exceed the value of the originating materials used, and -the value of all the transistors of heading No 8541 used does not exceed 3 % of the ex works price of the product 8528 Television receivers (including video monitors and video projectors), whether or not combined, in the same housing, with radio-broadcast receivers or sound or video recording or reproducing apparatus Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all the non-originating materials used does not exceed the value of the originating materials used, and -the value of all the transistors of heading No 8541 used does not exceed 3 % of the ex works price of the product 8529 Parts suitable for use solely or principally with the apparatus of heading Nos 8525 to 8528 -Suitable for use solely or principally with video recording or reproducing apparatus Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product - Other Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where the value of all the non-originating materials used does not exceed the value of the originating materials used, and -the value of all the transistors of heading No 8541 used does not exceed 3 % of the ex works price of the product 8535and8536 Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 5 % of the ex works price of the product 8537 Boards, panels (including numerical control panels), consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading No 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, other than switching apparatus of heading No 8517 Manufacture: - in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 5 % of the ex works price of the product ex8541 Diodes, transistors and similar semi-conductor devices, except wafers not yet cut into chips Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the products are only used up to a value of 5 % of the ex works price of the product 8542 Electronic integrated circuits and microassemblies Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within heading No 8541 or 8542, taken together, are only used up to a value of 5 % of the ex works price of the product 8544 Insulated (including enamelled or anodized) wire, cable (including co-axial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8545 Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8546 Electrical insulators of any material Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8548 Electrical parts of machinery or apparatus, not specified or included elsewhere in this chapter Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8601to8607 Railway or tramway locomotives, rolling-stock and parts thereof Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8608 Railway or tramway track fixtures and fittings; mechanical (including electromechanical) signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing Manufacture: - in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 8609 Containers (including containers for the transport of fluids) specially designed and equipped for carriage by one or more modes of transport Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product exChapter 87 Vehicles other than railway or tramway rolling-stock and parts and accessories thereof; except for those falling within the following headings or parts of headings for which the rules are set out below: 8709 to 8711, ex 8712, 8715 and 8716 Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 8709 Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 8710 Tanks and other armoured fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles Manufacture: - in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 8711 Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where the value of all the non-originating materials used does not exceed the value of the originating materials used ex8712 Bicycles without ball bearings Manufacture from materials not classified within heading No 8714 8715 Baby carriages and parts thereof Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 8716 Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 8803 Parts of goods of heading No 8801 or 8802 Manufacture in which the value of all the materials of heading No 8803 used does not exceed 5 % of the ex works price of the product 8804 Parachutes (including dirigible parachutes) and rotochutes; parts thereof and accessories thereto: - Rotochutes Manufacture from materials of any heading including other materials of heading No 8804 - Other Manufacture in which the value of all the materials of heading No 8804 used does not exceed 5 % of the ex works price of the product 8805 Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articles Manufacture in which the value of all the materials of heading No 8805 used does not exceed 5 % of the ex works price of the product Chapter 89 Ships, boats and floating structures Manufacture in which all the materials used are classified within a heading other than that of the product. However, hulls of heading No 8906 may not be used exChapter 90 Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for those falling within the following headings or parts of headings for which the rules are set out below: 9001, 9002, 9004, ex 9005, ex 9006, 9007, 9011, ex 9014, 9015 to 9020 and 9024 to 9033 Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 9001 Optical fibres and optical fibre bundles; optical fibre cables other than those of heading No 8544; sheets and plates of polarizing material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9002 Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9004 Spectacles, goggles and the like, corrective, protective or other Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product ex9005 Binoculars, monoculars, other optical telescopes, and mountings therefor, except for astronomical refracting telescopes and mountings therefor Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product, and -where the value of all the non-originating materials used does not exceed the value of the originating materials used ex9006 Photographic(other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than electrically ignited flashbulbs Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product, and -where the value of all the non-originating materials used does not exceed the value of the originating materials used 9007 Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product, and -where the value of all the non-originating materials used does not exceed the value of the originating materials used 9011 Compound optical microscopes, including those for photomicrography, cinephotomicrography or microprojection Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product, and -where the value of all the non-originating materials used does not exceed the value of the originating materials used ex9014 Other navigational instruments and appliances Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9015 Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9016 Balances of a sensitivity of 5 cg or better, with or without weights Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9017 Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers), not specified or included elsewhere in this chapter Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9018 Dentists' chairs incorporating dental appliances or dentists' spittoons Manufacture from materials of any heading, including other materials of heading No 9018 9024 Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics) Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9025 Hydrometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, recording or not, and any combination of these instruments Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9026 Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading No 9014, 9015, 9028 or 9032 Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9027 Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9028 Gas, liquid or electricity supply or production meters, including calibrating meters therefor: - Parts and accessories Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product - Other Manufacture: - in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where the value of all the non-originating materials used does not exceed the value of the originating materials used 9029 Revolution counters, production counters, taximeters, mileometers, pedometers and the like; speed indicators and tachometers, other than those of heading No 9014 or 9015; stroboscopes Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9030 Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading No 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionizing radiations Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9031 Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9032 Automatic regulating or controlling instruments and apparatus Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9033 Parts and accessories (not specified or included elsewhere in this chapter) for machines, appliances, instruments or apparatus of Chapter 90 Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product exChapter 91 Clocks and watches and parts thereof; except for those falling under the following headings for which the rules are set out below: 9105, 9109 to 9113 Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product 9105 Other clocks Manufacture: - in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where the value of all the non-originating materials used does not exceed the value of the originating materials used 9109 Clock movements, complete and assembled Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where the value of all the non-originating materials used does not exceed the value of the originating materials used 9110 Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within heading No 9114 are only used up to a value of 5 % of the ex works price of the product 9111 Watch cases and parts thereof Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 9112 Clock cases and cases of a similar type for other goods of this chapter, and parts thereof Manufacture: -in which the value of all the materials used does not exceed 40 % of the ex works price of the product, and -where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 5 % of the ex works price of the product 9113 Watch straps, watch bands and watch bracelets, and parts thereof: -Of base metal, whether or not plated, or clad with precious metal Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product - Other Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product Chapter 92 Musical instruments; parts and accessories of such articles Manufacture in which the value of all the materials used does not exceed 40 % of the ex works price of the product Chapter 93 Arms and ammunitions; parts and accessories thereof Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product ex9401andex9403 Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m² or less Manufacture in which all the materials used are classified within a heading other than that of the product or Manufacture from cotton cloth already made up in a form ready for use of heading No 9401 or 9403, provided: -its value does not exceed 25 % of the ex works price of the product, and -all the other materials used are already originating and are classified within a heading other than heading No 9401 or 9403 9405 Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product 9406 Prefabricated buildings Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product 9503 Other toys; reduced-size ('scale') models and similar recreational models, working or not; puzzles of all kinds Manufacture in which: -all the materials used are classified within a heading other than that of the product, and -provided the value of all the materials used does not exceed 50 % of the ex works price of the product ex 9506 Finished golf club heads Manufacture from roughly shaped blocks 9507 Fishing rods, fish-hooks and other line fishing tackle; fish landing nets, butterfly nets and similar nets; decoy 'birds' (other than those of heading No 9208 or 9705) and similar hunting or shooting requisites Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 5 % of the ex works price of the product ex9601andex9602 Articles of animal, vegetable or mineral carving materials Manufacture from 'worked' carving materials of the same heading ex 9603 Brooms and brushes, (except for besoms and the like and brushes made from marten or squirrel hair), hand-operated mechanical floor sweepers, not motorized, paint pads and rollers, squeegees and mops Manufacture in which the value of all the materials used does not exceed 50 % of the ex works price of the product 9605 Travel sets for personal toilet, sewing or shoe or clothes cleaning Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided their total value does not exceed 15 % of the ex works price of the set 9606 Buttons, press-fasteners, snap-fasteners and press-studs, button moulds and other parts of these articles; button blanks Manufacture in which: - all the materials used are classified within a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product 9608 Ball point pens; felt tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; pen-holders, pencil-holders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading No 9609 Manufacture in which all the materials used are classified within a heading other than that of the product. However, nibs or nib points may be used and the other materials classified within the same heading may also be used provided their value does not exceed 5 % of the ex works price of the product 9612 Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes Manufacture in which - all the materials used are classified within a heading other than that of the product, and -the value of all the materials used does not exceed 50 % of the ex works price of the product ex 9614 Smoking pipes or pipe bowls Manufacture from roughly shaped blocks (1) Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacturing of colouring preparations, provided they are not classified within another heading in Chapter 32. (2)A 'group' is regarded as any part of the heading separated from the rest by a semi-colon. (3) In the case of products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. (4) Until 31 March 1990, assembled suzluki, grey Siberian squirrel and hamster skins of heading No 4302 may be used. (5) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 6. (6) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 6. (7) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 6. (8) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 6.(9) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 6. (10) See Introductory Note 7 for the treatment of textile trimmings and accessories. (11)For special conditions relating to products made of a mixture of textile materials, see Introductory Note 6.(12) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 6. (13) For filter masks, manufacture from undrawn polyester staple fibres is permitted. This special provision shall apply until 31 March 1988. (14)See Introductory Note 7 for the treatment of textile trimmings and accessories.