LegalizeCommission Implementing Regulation (EU) No 901/2014 of 18 July 2014 implementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles Text with EEA relevance
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| 0. | GENERAL INFORMATION | |
| A. | General information concerning vehicles | |
| 0.1. | L1e — L7e | Make (trade name of manufacturer): … |
| 0.2. | L1e — L7e | Type(17): … |
| 0.2.1 | L1e — L7e | Variant(s)(17): … |
| 0.2.2 | L1e — L7e | Version(s)(17): … |
| 0.2.3. | L1e — L7e | Commercial name(s) (if available): … |
| 0.3. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| 0.4. | L1e — L7e | Company name and address of manufacturer: … |
| 0.4.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.4.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.5. | L1e — L7e | Manufacturer’s statutory plate(s): … |
| 0.5.1. | L1e — L7e | Location of the manufacturer's statutory plate(15)(18): … |
| 0.5.2. | L1e — L7e | Method of attachment: … |
| 0.5.3. | L1e — L7e | Photographs and/or drawings of the statutory plate (completed example with dimensions): … |
| 0.6. | L1e — L7e | Location of the vehicle identification number(15): … |
| 0.6.1. | L1e — L7e | Photographs and/or drawings of the locations of the vehicle identification number (completed example with dimensions): … |
| 0.6.1.1. | L1e — L7e | The serial number of the type begins with: … |
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): … | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| 0.11. | L1e — L7e | Type-approval marks for components and separate technical units(19): … |
| 0.11.1. | L1e — L7e | Method of attachment: … |
| 0.11.2. | L1e — L7e | Photographs and/or drawings of the location of the type-approval mark (completed example with dimensions): … |
| C. | General information regarding conformity of production and access to repair and maintenance information | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 0.13. | Access to repair and maintenance information | |
| 0.13.1. | L1e — L7e | Address of principal website for access to vehicle repair and maintenance information: … |
| 0.13.2. | L1e — L7e | In the case of multi-stage type-approval, address of principal website for access to vehicle repair and maintenance information from manufacturer(s) at previous stage(s): |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.1. | L1e — L7e | Photographs and/or drawings of a representative vehicle: … |
| 1.2. | L1e — L7e | Scale drawing of the whole vehicle: … |
| 1.3. | L1e — L7e | Number of axles and wheels: … |
| 1.3.1. | L1e — L7e | Axles with twinned wheels(23): … |
| 1.3.2. | L1e — L7e | Powered axles(23): … |
| 1.4. | L1e — L7e | Chassis (if any) (overall drawing): … |
| 1.5. | L2e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C | Material used for the bodywork: |
| 1.6. | L1e — L7e | Position and arrangement of the propulsion(s): … |
| 1.7. | L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C | Hand of drive: left/right/centre(4): … |
| 1.7.1. | L1e — L7e | Vehicle is equipped to be driven in right/left-hand traffic and in countries that use metric/metric and imperial units.(4): … |
| 1.8. | Propulsion unit performance | |
| 1.8.1. | L3e, L4e, L5e, L7e-A, L7e-B2 | Declared maximum vehicle speed: … km/h |
| 1.8.2. | L1e, L2e, L6e, L7e-B1, L7e-C | Maximum design vehicle speed (22): … km/h and gear in which it is reached: … |
| 1.8.3. | L1e — L7e | Maximum net power combustion engine: … kW at … min-1 at A/F ratio: … |
| 1.8.4. | L1e — L7e | Maximum net torque combustion engine: … Nm at … min-1 at A/F ratio: … |
| 1.8.5. | L1e — L7e | Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1 |
| 1.8.6. | L1e — L7e | Maximum continuous-rated torque electric motor: … Nm at … min-1 |
| 1.8.7. | L1e — L7e | Maximum continuous total power for propulsion(s): …. kW at …. min-1 at A/F ratio: … |
| 1.8.8. | L1e — L7e | Maximum continuous total torque for propulsion(s): … Nm at … min-1 at A/F ratio: … |
| 1.8.9. | L1e — L7e | Maximum peak power for propulsion(s): … kW at … min-1at A/F ratio: … |
| 2. | MASSES AND DIMENSIONS (in kg and mm.) refer to drawings where applicable | |
| 2.1 | Range of vehicle mass (overall) | |
| 2.1.1. | L1e — L7e | Mass in running order: … kg |
| 2.1.1.1. | L1e — L7e | Distribution of mass in running order between the axles: … kg |
| 2.1.2. | L1e — L7e | Actual mass: … kg |
| 2.1.2.1. | L1e — L7e | Distribution of actual mass between the axles: … kg |
| 2.1.3. | L1e — L7e | Technically permissible maximum laden mass: … kg |
| 2.1.3.1. | L1e — L7e | Technically permissible maximum mass on front axle: … kg |
| 2.1.3.2. | L1e — L7e | Technically permissible maximum mass on rear axle: … kg |
| 2.1.3.3. | L4e | Technically permissible maximum mass on sidecar axle: … kg |
| 2.1.4. | L1e — L7e | Maximum hill-starting ability at the maximum technically permissible mass declared by the manufacturer: … % slope |
| 2.1.5. | L1e — L7e | Maximum pay mass declared by manufacturer: … kg |
| 2.1.6. | L1e — L7e | Safe load carrying capacity of load platform declared by manufacturer: … kg |
| 2.1.7. | L1e — L7e | Technically permissible maximum towable mass in case of (4): Braked: … kg Unbraked: … kg |
| 2.1.7.1 | L1e — L7e | Technically permissible maximum laden mass of the combination: … kg |
| 2.1.7.2. | L1e — L7e | Technically permissible maximum mass at the coupling point: … kg |
| 2.1.8. | L1e — L7e | Mass of the optional equipment: … kg |
| 2.1.9. | L1e — L7e | Mass of the superstructure: … kg |
| 2.1.10. | L1e — L7e | Mass of the propulsion battery: … kg |
| 2.1.11. | L2e, L4e, L5e, L6e, L7e | Mass of the doors: … kg |
| 2.1.12. | L2e-U, L5e-B, L6e-BU, L7e-CU | Mass of the machines or equipment installed on the load platform area: … kg |
| 2.1.13. | L1e — L7e | Mass of the gaseous fuel system as well as storage tanks for gaseous fuel: … kg |
| 2.1.14. | L1e — L7e | Mass of the storage tanks to store compressed air: … kg |
| 2.2. | Range of vehicle dimensions (overall) | |
| 2.2.1. | L1e — L7e | Length: … mm |
| 2.2.2. | L1e — L7e | Width: … mm |
| 2.2.3. | L1e — L7e | Height: … mm |
| 2.2.4. | L1e — L7e | Wheelbase: … mm |
| 2.2.4.1. | L4e | Wheelbase sidecar(28): … mm |
| 2.2.5. | Track width | |
| 2.2.5.1. | L1e — L7e if equipped with twinned wheels L2e, L4e, L5e, L6e, L7e | Track width front: … mm. |
| 2.2.5.2. | L1e — L7e if equipped with twinned wheels | Track width rear: … mm. |
| 2.2.5.3. | L2e, L4e, L5e, L6e, L7e | Track width sidecar: … mm. |
| 2.2.6. | L7e-B | Front overhang: … mm. |
| 2.2.7. | L7e-B | Rear overhang: … mm. |
| 2.2.8. | Load platform dimensions | |
| 2.2.8.1. | L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU | Length of the load platform: … mm. |
| 2.2.8.2. | L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU | Width of load platform: … mm. |
| 2.2.8.3. | L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU | Height of load platform: … mm. |
| 2.2.9. | Centre of gravity | |
| 2.2.9.1. | L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU | Location of the centre of gravity forward of the rear axle Lcg: … mm. |
| 2.2.9.2. | L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU | Location of the centre of gravity above the ground plane Hcg: … mm. |
| 2.2.9.3. | L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU | Location centre of gravity of loaded platform forward of the rear axle LcgLP: … mm. |
| 2.2.10. | Miscellaneous dimensions | |
| 2.2.10.1. | L7e-B2 | Approach angle(11): … degrees. |
| 2.2.10.2. | L7e-B2 | Departure angle(11): … degrees. |
| 2.2.10.3. | L7e-B2 | Ramp angle(11): … degrees. |
| 2.2.10.4. | L7e-B2 | Ground clearance under the front axle(11): … mm. |
| 2.2.10.5. | L7e-B2 | Ground clearance under the rear axle(11): … mm. |
| 2.2.10.6. | L3e-AxE (x=1, 2 or 3), L3e-AxT (x=1, 2 or 3) L7e-B | Ground clearance between the axles(11): … mm. |
| 2.2.10.7. | L7e-B | Wheelbase to ground clearance ratio … [no unit] |
| 2.2.10.8. | L7e-B2 | Static stability coefficient — Kst: … [no unit] |
| 2.2.10.9. | L3e-AxE, L3e-AxT | Seat height: … mm |
| 2.2.10.10. | L3e-AxE, L3e-AxT | Ground clearance: … mm |
| 3. | GENERAL POWERTRAIN CHARACTERISTICS | |
| 3.1 | Manufacturer of the propulsion unit | |
| 3.1.1. | Combustion engine | |
| 3.1.1.1. | L1e — L7e | Manufacturer: … |
| 3.1.1.2. | L1e — L7e | Engine code (as marked on the engine or other means of identification): … |
| 3.1.1.3. | L1e — L7e | Fuel identification marking (if available): … |
| 3.1.2. | Electric motor | |
| 3.1.2.1. | L1e — L7e | Manufacturer: … |
| 3.1.2.2. | L1e — L7e | Electric motor code (as marked on the engine or other means of identification): … |
| 3.1.3. | Hybrid application | |
| 3.1.3.1. | L1e — L7e | Manufacturer: … |
| 3.1.3.2. | L1e — L7e | Application code (as marked on the engine or other means of identification): … |
| 3.1.3.3. | L1e — L7e | Fuel identification marking (if available): … |
| 3.1.3.4. | L1e — L7e | Photographs and/or drawings of the location of the code(s) and/or type-approval numbers (completed example with dimensions)(20): … |
| 3.2. | Combustion engine | |
| 3.2.1. | Specific engine information | |
| 3.2.1.1. | L1e — L7e | Number of combustion engines: … |
| 3.2.1.2. | L1e — L7e | Working principle: internal combustion engine (ICE)/positive ignition/compression ignition /external combustion engine (ECE)/turbine/compressed air(4): … |
| 3.2.1.3. | L1e — L7e | Cycle: four-stroke/two-stroke/rotary/other(4): … |
| 3.2.1.4. | L1e — L7e | Cylinders |
| 3.2.1.4.1. | L1e — L7e | Number: … |
| 3.2.1.4.2. | L1e — L7e | Arrangement(26): … |
| 3.2.1.4.3. | L1e — L7e | Bore(12): … mm |
| 3.2.1.4.4. | L1e — L7e | Stroke(12): … mm |
| 3.2.1.4.5. | L1e — L7e | Number and configuration of stators in the case of rotary-piston engine: … |
| 3.2.1.4.6. | L1e — L7e | Volume of combustion chambers in the case of rotary-piston engine: … cm3 |
| 3.2.1.4.7. | L1e — L7e | Firing order: … |
| 3.2.1.5. | L1e — L7e | Engine capacity(6): … cm3 |
| 3.2.1.6. | L1e — L7e | Volumetric compression ratio(7): … |
| 3.2.1.7. | L1e — L7e | Number of inlet and exhaust valves |
| * 3.2.1.7.1. | L1e — L7e | Number and minimum cross-sectional areas of inlet and outlet ports: … |
| * 3.2.1.7.2. | L1e — L7e | Valve timing or equivalent data: … |
| * 3.2.1.7.3. | L1e — L7e | Maximum lift of valves, angles of opening and closing, or timing details of alternative distribution systems, in relation to dead centres. For variable timing system, minimum and maximum timing: … |
| * 3.2.1.7.4. | L1e — L7e | Reference and/or setting ranges(4): … |
| 3.2.1.8. | L1e — L7e | Drawings of combustion chamber, cylinder head, piston, piston rings: … |
| 3.2.1.9. | L1e — L7e | Normal warm engine idling speed: … min-1 |
| 3.2.1.10. | L1e — L7e | Stop-start system: yes/no(4) |
| * 3.2.2. | Powertrain/propulsion/drive-train management system | |
| 3.2.2.1. | L1e — L7e | PCUs/ECUs(4) software identification number(s): … and calibration verification number(s): … |
| 3.2.3. | Fuel | |
| 3.2.3.1. | L1e — L7e | Fuel type: (9) |
| 3.2.3.2. | L1e — L7e | Vehicle fuel configuration: mono-fuel/bi- fuel/flex fuel(4) |
| 3.2.3.2.1. | L1e — L7e | Maximum amount of bio-fuel acceptable in fuel: … % by volume |
| 3.2.4. | Fuel pressure delivery and control | |
| 3.2.4.1. | L1e — L7e | Brief description and schematic drawing of low-and/or high-pressure fuelling wet system(s)(4): … |
| 3.2.4.2. | L1e — L7e | Low- and/or high-pressure fuel pump(s): yes/no(4) |
| 3.2.4.2.1. | L1e — L7e | Fuel pump control: mechanical/on/off electric/continuous operation/electronically controlled variable operation(4): … |
| 3.2.4.2.2. | L1e — L7e | For CI combustion engines and dual fuel engines only maximum fuel delivery (4)(7): … g/s or mm3/stroke or cycle at an engine speed of:…min-1 or, alternatively, a characteristic diagram: … (When boost control is supplied, state the characteristic fuel delivery and boost pressure versus engine speed) |
| 3.2.4.3. | L1e — L7e | Common rail: yes/no(4) |
| 3.2.4.4. | L1e — L7e | Fuel distributor/rail/hoses(4): yes/no(4) |
| 3.2.4.5. | L1e — L7e | Fuel pressure and/or fuel flow regulator(s): yes/no(4) |
| 3.2.5. | Fuel mass metering and control | |
| 3.2.5.1. | L1e — L7e | By carburettor(s): yes/no(4) |
| * 3.2.5.1.1. | L1e — L7e | Operating principle and construction: … |
| * 3.2.5.1.2. | L1e — L7e | Maximum fuel-flow rate: … g/s at maximum power and torque: … |
| 3.2.5.1.3. | L1e — L7e | Carburettor(s) settings(7): … |
| * 3.2.5.1.4. | L1e — L7e | Carburettor diffusers: … |
| * 3.2.5.1.5. | L1e — L7e | Carburettor fuel-level in float chamber: … |
| * 3.2.5.1.5.1. | L1e — L7e | Carburettor mass of float: … |
| 3.2.5.1.6. | L1e — L7e | Carburettor cold-starting system: manual/automatic(4): yes/no(4) |
| 3.2.5.1.6.1. | L1e — L7e | Carburettor cold-starting system operating principle(s): … |
| 3.2.5.1.7. | L1e — L7e | Mixture scavenging port: yes/no(4) |
| 3.2.5.1.7.1. | L1e — L7e | Mixture scavenging port dimensions: … |
| 3.2.5.2. | L1e — L7e | By mechanically/hydraulically controlled fuel injection(4): yes/no(4) |
| 3.2.5.2.1. | L1e — L7e | Operation principle: … |
| 3.2.5.2.2. | L1e — L7e | Mechanical/electronic(4) adjustment of maximum fuel mass delivery: yes/no(4) |
| 3.2.5.3. | L1e — L7e | By electronically controlled fuel injection system: yes/no(4) |
| 3.2.5.3.1. | L1e — L7e | Operation principle: port injection/direct injection/pre-chamber/swirl chamber(4): … |
| 3.2.5.3.2. | L1e — L7e | Fuel injector(s): single-/multi-point/direct injection/other (specify) (4): … |
| 3.2.5.3.3. | L1e — L7e | Total and per cylinder amount of fuel injectors: … |
| 3.2.5.4. | L1e — L7e | Air-assisted fuel injector: yes/no(4): … |
| 3.2.5.4.1. | L1e — L7e | Description and operating pressure of air-assist: … |
| 3.2.5.5. | L1e — L7e | Cold start system: yes/no(4) |
| 3.2.5.5.1. | L1e — L7e | Description of cold start system: … |
| 3.2.5.6. | L1e — L7e | Auxiliary starting aid: yes/no(4) |
| 3.2.5.7. | L1e — L7e | CI injection specific: yes/no |
| 3.2.5.7.1. | L1e — L7e | Static injection timing(7): … |
| 3.2.5.7.2. | L1e — L7e | Injection advance curve(7): … |
| 3.2.6. | Gaseous fuelling system and control | |
| 3.2.6.1. | L1e — L7e | Brief description and schematic drawing of gaseous fuelling system(s): … |
| 3.2.6.2. | L1e — L7e | Liquefied petroleum gas (LPG) fuelling system: yes/no(4) |
| 3.2.6.2.1. | L1e — L7e | Type-approval number according to UNECE Regulation No 67 [^E0008]: … |
| 3.2.6.2.2. | L1e — L7e | Electronic engine management control unit for LPG fuelling: yes/no(4) |
| 3.2.6.2.2.1. | L1e — L7e | Emission-related adjustment possibilities: … |
| 3.2.6.2.3. | L1e — L7e | Further documentation: … |
| * 3.2.6.2.3.1 | L1e — L7e | Description of the safeguarding of the catalyst at switch-over from petrol to LPG or back: … |
| 3.2.6.2.3.2 | L1e — L7e | System layout (electrical connections, vacuum connections, compensation hoses, etc.): … |
| 3.2.6.2.4. | L1e — L7e | Drawing of the symbol: … |
| 3.2.6.3. | L1e — L7e | Natural gas (NG) fuelling system: yes/no(4) |
| 3.2.6.3.1. | L1e — L7e | Type-approval number according to UNECE Regulation No 110 [^E0009]: … |
| 3.2.6.3.2. | L1e — L7e | Electronic engine management-control unit for NG fuelling: yes/no(4) |
| 3.2.6.3.2.1. | L1e — L7e | Emission-related adjustment possibilities: … |
| 3.2.6.3.3. | L1e — L7e | Further documentation: … |
| * 3.2.6.3.3.1. | L1e — L7e | Description of the safeguarding of the catalyst at switch-over from petrol to NG or back: … |
| 3.2.6.3.3.2. | L1e — L7e | System layout (electrical connections, vacuum connections compensation hoses, etc.): … |
| 3.2.6.3.4. | L1e — L7e | Drawing of the symbol: … |
| 3.2.6.4. | L1e — L7e | Gaseous fuel: LPG/NG-H/NG-L/NG-HL(4): yes/no(4) |
| 3.2.6.4.1. | L1e — L7e | Pressure regulator(s) or vaporiser/pressure regulator(s)(4) |
| * 3.2.6.4.1.1. | L1e — L7e | Number of pressure reduction stages: … |
| 3.2.6.4.1.2. | L1e — L7e | Pressure in final stage, minimum: … kPa — maximum: … kPa |
| 3.2.6.4.1.3. | L1e — L7e | Number of main adjustment points: … |
| 3.2.6.4.1.4. | L1e — L7e | Number of idle adjustment points: … |
| 3.2.6.4.1.5. | L1e — L7e | Type-approval number: … |
| 3.2.6.4.2. | L1e — L7e | Fuelling system: mixing unit/gas injection/liquid injection/direct injection(4) |
| * 3.2.6.4.2.1. | L1e — L7e | Mixture strength regulation: … |
| 3.2.6.4.2.2. | L1e — L7e | System description and/or diagram and drawings: … |
| 3.2.6.4.2.3. | L1e — L7e | Type-approval number: … |
| 3.2.6.4.3. | L1e — L7e | Mixing unit: yes/no(4) |
| 3.2.6.4.3.1. | L1e — L7e | Number: … |
| 3.2.6.4.3.2. | L1e — L7e | Location: … |
| 3.2.6.4.3.3. | L1e — L7e | Adjustment possibilities: … |
| 3.2.6.4.3.4. | L1e — L7e | Type-approval number: … |
| 3.2.6.4.4. | L1e — L7e | Inlet manifold injection: yes/no(4) |
| 3.2.6.4.4.1. | L1e — L7e | Injection: single-point/multi-point(4) |
| 3.2.6.4.4.2. | L1e — L7e | Injection: continuous/simultaneously timed/sequentially timed(4) |
| 3.2.6.4.5. | L1e — L7e | Injection equipment: yes/no(4) |
| 3.2.6.4.5.1. | L1e — L7e | Adjustment possibilities: … |
| 3.2.6.4.5.2. | L1e — L7e | Type-approval number: … |
| 3.2.6.4.6. | L1e — L7e | Supply pump: yes/no(4) |
| 3.2.6.4.6.1. | L1e — L7e | Type-approval number: … |
| 3.2.6.4.7. | L1e — L7e | Injector(s): … |
| 3.2.6.4.7.1. | L1e — L7e | Type-approval number: … |
| 3.2.6.4.8. | L1e — L7e | Direct/port injection: yes/no(4) |
| 3.2.6.4.9. | L1e — L7e | Injection pump/pressure regulator: yes/no (4) |
| 3.2.6.4.9.1. | L1e — L7e | Type-approval number: … |
| 3.2.6.4.10. | L1e — L7e | Separate electronic control unit (ECU) for gaseous fuelling system: yes/no(4) |
| 3.2.6.4.10.1. | L1e — L7e | Adjustment possibilities: … |
| 3.2.6.4.10.2. | L1e — L7e | Software identification number(s): … |
| 3.2.6.4.10.3. | L1e — L7e | Calibration verification number(s): … |
| 3.2.6.5. | L1e — L7e | NG fuel-specific equipment: … |
| 3.2.6.5.1. | L1e — L7e | Variant 1 (only in the case of approvals of engines for several specific fuel compositions): … |
| 3.2.6.5.2. | L1e — L7e | Fuel composition: |
| Overview methane (CH4): basis: …%mole min. …%mole max. …%mole ethane (C2H6): basis: …%mole min. …%mole max. …%mole propane (C3H8): basis: …%mole min. …%mole max. …%mole butane (C4H10): basis: …%mole min. …%mole max. …%mole C5/C5+: basis: …%mole min. …%mole max. …%mole oxygen (O2): basis: …%mole min. …%mole max. …%mole inert (N2, He, etc.): basis: …%mole min. …%mole max. …%mole | ||
| 3.2.6.5.3. | L1e — L7e | Gaseous fuel injector(s): … |
| 3.2.6.5.4. | L1e — L7e | Variant 2 (only in the case of approvals for several specific fuel compositions): … |
| 3.2.6.6. | L1e — L7e | Hydrogen fuel-specific equipment: yes/no(4) |
| 3.2.6.6.1. | L1e — L7e | EC type-approval number according to Regulation (EC) No 79/2009 of the European Parliament and of the Council [^E0010]: … |
| * 3.2.6.6.2. | L1e — L7e | Further documentation |
| 3.2.6.6.3. | L1e — L7e | System layout (electrical connections, vacuum connections, compensation hoses, etc.): … |
| * 3.2.6.6.4. | L1e — L7e | Description of the safeguarding of the catalyst at switch-over from petrol to hydrogen/H2NG(4) or back: … |
| 3.2.6.6.5. | L1e — L7e | Drawing of the symbol: … |
| 3.2.6.7. | L1e — L7e | H2NG fuelling system: yes/no(4) |
| 3.2.6.7.1. | L1e — L7e | Percentage of hydrogen in the fuel (the maximum specified by the manufacturer): … |
| 3.2.7. | Air-induction system | |
| 3.2.7.1. | L1e — L7e | Brief description and schematic drawing of gaseous intake air-flow and induction system: … |
| 3.2.7.2. | L1e — L7e | Intake manifold description and working principle (e.g. fixed length/variable length/swirl valves)(4) (include detailed drawings and/or photos): … |
| * 3.2.7.2.1. | L1e — L7e | Description and drawings of inlet pipes and their accessories (plenum chamber, heating device with control strategy, additional air intakes, etc.): … |
| 3.2.7.3. | L1e — L7e | Intake air pressure charger: yes/no(4) |
| 3.2.7.3.1. | L1e — L7e | Brief description and schematic drawing of the intake air-pressure charger system: … |
| 3.2.7.3.2. | L1e — L7e | Working and control principles: … |
| 3.2.7.3.3. | L1e — L7e | Type(s) (turbo or supercharger, other)(4): … |
| 3.2.7.3.4. | L1e — L7e | Maximum intake air-charge pressure and flow-rate at maximum torque and power: … kPa and g/s or charge pressure and flow-rate map: … kPa and g/s |
| 3.2.7.4. | L1e — L7e | Waste gate: yes/no(4) |
| 3.2.7.5. | L1e — L7e | Intercooler: yes/no(4) |
| 3.2.7.5.1. | L1e — L7e | Type: air-air/air-water/other(4) |
| * 3.2.7.5.2. | L1e — L7e | Intake depression at rated engine speed and at 100 % load (compression ignition engines only): … kPa |
| 3.2.7.6. | L1e — L7e | Air filter, (drawings, photographs): … |
| 3.2.7.7. | L1e — L7e | Intake air-silencer description (drawings, photographs): … |
| * 3.2.7.7.1. | L1e — L7e | Working principle: … |
| 3.2.8. | Air-mass metering and control | |
| 3.2.8.1. | L1e — L7e | Brief description and schematic drawing of air-mass metering and control system: … |
| 3.2.8.2. | L1e — L7e | Mechanical throttle body: yes/no(4) |
| 3.2.8.3. | L1e — L7e | Electronic throttle control (ETC): yes/no(4) |
| 3.2.8.3.1. | L1e — L7e | Schematic drawing of electronic throttle control: … |
| * 3.2.8.3.1.2. | L1e — L7e | Description of ETC hardware redundancies regarding sensors/actuators/electric power/ground/control electronics: … |
| 3.2.9. | Spark delivery system and control | |
| 3.2.9.1. | L1e — L7e | Brief description and schematic drawing of spark delivery and control system: … |
| 3.2.9.1.1. | L1e — L7e | Working principle: … |
| L1e — L7e | Ignition advance curve or map(7) at wide open throttle: … | |
| 3.2.9.1.3. | L1e — L7e | Static ignition timing (7): … degrees before TDC at maximum torque and power |
| 3.2.9.2. | L1e — L7e | Ion sense capability: yes/no(4) |
| 3.2.9.3. | L1e — L7e | Spark plugs: |
| 3.2.9.3.1. | L1e — L7e | Gap setting: … mm |
| 3.2.9.4. | L1e — L7e | Ignition coil(s): |
| * 3.2.9.4.1. | L1e — L7e | Working principle: … |
| * 3.2.9.4.2. | L1e — L7e | Dwell angle and timing at wide open throttle: … |
| 3.2.10. | Powertrain cooling system and control | |
| 3.2.10.1. | L1e — L7e | Brief description and schematic drawing of powertrain cooling and control system: … |
| 3.2.10.2. | L1e — L7e | Cooling system: liquid: yes/no(4) |
| 3.2.10.2.1. | L1e — L7e | Maximum temperature at outlet: … K |
| 3.2.10.2.2. | L1e — L7e | Nominal setting of the engine temperature control mechanism: … |
| 3.2.10.2.3. | L1e — L7e | Nature of liquid: … |
| 3.2.10.2.4. | L1e — L7e | Circulating pump(s): yes/no(4) |
| 3.2.10.2.4.1. | L1e — L7e | Characteristics: … |
| 3.2.10.2.5. | L1e — L7e | Drive ratio(s): … |
| 3.2.10.2.6. | L1e — L7e | Description of the fan and its drive mechanism: … |
| 3.2.10.3. | L1e — L7e | Air cooling: yes/no(4) |
| 3.2.10.3.1. | L1e — L7e | Reference point: … |
| 3.2.10.3.2. | L1e — L7e | Maximum temperature at reference point: … K |
| 3.2.10.3.3. | L1e — L7e) | Fan: yes/no(4) |
| 3.2.10.3.3.1. | L1e — L7e | Characteristics: … |
| 3.2.10.3.3.2. | L1e — L7e | Drive ratio(s): … |
| 3.2.11. | Powertrain lubrication system and control | |
| 3.2.11.1. | L1e — L7e | Brief description and schematic drawing of powertrain lubrication and control system: … |
| 3.2.11.2. | L1e — L7e | Lubrication system configuration(s) (wet sump, dry sump, other, pump/injection into induction system/mixed with the fuel, etc.)(4): … |
| 3.2.11.3. | L1e — L7e | Location of oil reservoir (if any): … |
| 3.2.11.4. | L1e — L7e | Feed system (pump/injection into induction system/mixed with the fuel, etc.)(4): … |
| 3.2.11.5. | L1e — L7e | Lubricating pump: yes/no(4) … |
| 3.2.11.6. | L1e — L7e | Oil cooler: yes/no(4) |
| 3.2.11.6.1. | L1e — L7e | Drawing … |
| 3.2.11.7. | L1e — L7e | Lubricant(s) characteristics: … |
| 3.2.11.8. | L1e — L7e | Lubricant mixed with the fuel: yes/no(4): … |
| 3.2.11.8.1. | L1e — L7e | Percentage range of lubricant mixed with the fuel: … |
| 3.2.12. | Exhaust system and control | |
| 3.2.12.1. | L1e — L7e | Brief description and schematic drawing of exhaust devices for noise and tailpipe emission control: … |
| 3.2.12.2. | L1e — L7e | Description and drawing of the exhaust manifold: … |
| 3.2.12.3. | L1e — L7e | Description and detailed drawing of the exhaust device: … |
| 3.2.12.4. | L1e — L7e | Maximum permissible exhaust back-pressure at rated engine speed and at 100 % load: … kPa(29) |
| 3.2.12.5. | L1e — L7e | Type, marking of exhaust noise-abatement device(s): … |
| * 3.2.12.6. | L1e — L7e | Noise-reducing measures in the engine compartment and on the engine where relevant for external noise: … |
| 3.2.12.7. | L1e — L7e | Location of the exhaust outlet: … |
| 3.2.12.8. | L1e — L7e | Exhaust noise-abatement device containing fibrous materials: yes/no(4): … |
| 3.2.13. | Other electrical systems and control than those intended for the electrical propulsion | |
| 3.2.13.1. | L1e — L7e | Rated voltage: … V, positive/negative ground(4) |
| 3.2.13.2. | L1e — L7e | Generator: yes/no(4): |
| 3.2.13.2.1. | L1e — L7e | Nominal output: … VA |
| 3.2.13.3. | L1e — L7e | Battery(ies): yes/no(4) |
| 3.2.13.3.1. | L1e — L7e | Capacity and other characteristics (mass,…): … |
| 3.2.13.4. | L1e — L7e | Electric heating systems for the passenger compartment: yes/no(4) |
| 3.3. | Pure electric and hybrid electric propulsion and control | |
| 3.3.1. | L1e — L7e | Electric vehicle configuration: pure electric/hybrid electric/manpower — electric(4): |
| 3.3.2. | L1e — L7e | Brief description and schematic drawing of pure and hybrid electric propulsions and its control system(s): … |
| 3.3.3. | Electric propulsion motor | |
| 3.3.3.1. | L1e — L7e | Number of electric motors for propulsion: … |
| 3.3.3.2. | L1e — L7e | Type (winding, excitation): … |
| 3.3.3.3. | L1e — L7e | Operating voltage: … V |
| 3.3.3.4. | L1e — L7e | 15/30(4) minutes power(27): … kW |
| 3.3.4. | Propulsion batteries | |
| 3.3.4.1. | L1e — L7e | Primary propulsion battery |
| 3.3.4.1.1. | L1e — L7e | Number of cells: … |
| 3.3.4.1.2. | L1e — L7e | Mass: … kg |
| 3.3.4.1.3. | L1e — L7e | Capacity: … Ah (Amp-hours) / … V |
| 3.3.4.1.4. | L1e — L7e | Voltage: … V |
| 3.3.4.1.5. | L1e — L7e | Position in the vehicle: … |
| 3.3.4.2. | L1e — L7e | Secondary propulsion battery |
| 3.3.4.2.1. | L1e — L7e | Number of cells: … |
| 3.3.4.2.2. | L1e — L7e | Mass: … kg |
| 3.3.4.2.3. | L1e — L7e | Capacity: … Ah (Amp-hours) / … V |
| 3.3.4.2.4. | L1e — L7e | Voltage: … V |
| 3.3.4.2.5. | L1e — L7e | Position in the vehicle: … |
| 3.3.5. | Hybrid electric vehicle | |
| 3.3.5.1. | L1e — L7e | Engine or motor combination (number of electric motor(s) and/or combustion engine(s)/other)(4): … |
| 3.3.5.2. | L1e — L7e | Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging: |
| 3.3.5.3. | L1e — L7e | Operating mode switch: with/without(4) |
| 3.3.5.4. | L1e — L7e | Selectable modes: yes/no(4) |
| 3.3.5.5. | L1e — L7e | Pure fuel consuming: yes/no(4) |
| 3.3.5.6. | L1e — L7e | Vehicle propelled with fuel cell: yes/no(4) |
| 3.3.5.7. | L1e — L7e | Hybrid operation modes: yes/no(4) (if yes, short description): … |
| 3.3.6. | Energy storage device | |
| 3.3.6.1. | L1e — L7e | Description: (battery, capacitor, flywheel/generator)(4) |
| 3.3.6.2. | L1e — L7e | Identification number: … |
| * 3.3.6.3. | L1e — L7e | Kind of electrochemical couple: … |
| 3.3.6.4. | L1e — L7e | Energy (for battery: voltage and capacity Ah in 2h, for capacitor: J,…, for flywheel/generator: J,…,): … |
| 3.3.6.5. | L1e — L7e | Charger: on-board/external/without(4) |
| 3.3.7. | Electric motor (describe each type of electric motor separately) … | |
| 3.3.7.1. | L1e — L7e | Primary use: propulsion motor/generator(4) |
| 3.3.7.2. | L1e — L7e | When used as propulsion motor: single-/multi-motors (number)(4): … |
| 3.3.7.3. | L1e — L7e | Working principle: … |
| 3.3.7.4. | L1e — L7e | Direct current/alternating current/number of phases: … |
| 3.3.7.5. | L1e — L7e | Separate excitation/series/compound(4): |
| 3.3.7.6. | L1e — L7e | Synchronous/asynchronous(4): |
| 3.3.8. | Electric motor control unit | |
| 3.3.8.1. | L1e — L7e | Identification number: … |
| 3.3.9. | Power controller | |
| 3.3.9.1. | L1e — L7e | Identification number: … |
| 3.4. | Other engines, electric motors or combinations (specific information concerning the parts of these motors) | |
| 3.4.1. | Cooling system (temperatures permitted by the manufacturer) | |
| 3.4.1.1. | L1e — L7e | Liquid cooling: … |
| 3.4.1.1.1. | L1e — L7e | Maximum temperature at outlet: … K |
| 3.4.1.2. | L1e — L7e | Air cooling: … |
| 3.4.1.2.1. | L1e — L7e | Reference point: … |
| 3.4.1.2.2. | L1e — L7e | Maximum temperature at reference point: … K |
| 3.4.2. | Lubrication system | |
| 3.4.2.1. | L1e — L7e | Description of lubrication system: … |
| 3.4.2.2. | L1e — L7e | Location of oil reservoir (if any): … |
| 3.4.2.3. | L1e — L7e | Feed system (pump/injection into induction system/mixed with the fuel, etc.)(4): … |
| 3.4.2.4. | L1e — L7e | Lubricant mixed with the fuel: … |
| 3.4.2.4.1. | L1e — L7e | Percentage: … |
| 3.4.2.5. | L1e — L7e | Oil cooler: yes/no(4): … |
| * 3.4.2.5.1. | L1e — L7e | Drawing(s): … |
| 3.5. | Drive-train and control (13) | |
| 3.5.1. | L1e — L7e | Brief description and schematic drawing of the vehicle drive-train and its control system (gear shift control, clutch control or any other element of drive-train): … |
| 3.5.2. | Clutch | |
| 3.5.2.1. | L1e — L7e | Brief description and schematic drawing of the clutch and its control system: … |
| 3.5.3. | Transmission | |
| 3.5.3.1. | L1e — L7e | Brief description and schematic drawing of gear shift system(s) and its control: … |
| 3.5.3.2. | L1e — L7e | Drawing of the transmission: … |
| 3.5.3.3. | L1e — L7e | Type (mechanical, hydraulic, electric, manual/manual automated/automatic/CVT/ other (indicate).)(4): … |
| 3.5.3.4. | L1e — L7e | A brief description of the electrical/electronic components (if any): … |
| 3.5.3.5. | L1e — L7e | Location relative to the engine: … |
| 3.5.3.6. | L1e — L7e | Method of control: … |
| 3.5.4. | L1e — L7e | Gear ratios |
| Overview gear ratios Gear(24) Internal transmission ratios (ratios of engine to transmission output shaft revolutions) Final drive ratio(s) (ratio of transmission output shaft to driven wheel revolutions) Total gear ratios Ratio (engine speed/vehicle speed) for manual transmission only 1 2 3 … Reverse | ||
| 3.5.4.1. | L3e-AxE, L3e-AxT | Final drive ratio: … |
| 3.5.4.2. | L3e-AxE, L3e-AxT | Overall gear ratio in highest gear: … |
| 3.6. | Safe-cornering device | |
| 3.6.1. | L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e | Safe-cornering device (Annex VIII to Regulation (EU) No 168/2013: yes/no(4); differential/other(4) |
| 3.6.2. | L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e | Differential lock: yes/no/optional(4) |
| 3.6.3. | L1e — L7e | Brief description and schematic drawing of the safe-cornering device, the differential lock and their control systems: … |
| 3.7. | Suspension and control | |
| 3.7.1. | L1e — L7e | Brief description and schematic drawing of suspension and its control system: … |
| 3.7.2. | L1e — L7e | Drawing of the suspension arrangements: … |
| 3.7.3. | L1e — L7e | Level adjustment: yes/no/optional(4) |
| 3.7.4. | L1e — L7e | Brief description of the electrical/electronic components: … |
| 3.7.5. | L1e — L7e | Stabilisers: yes/no/optional(4) |
| 3.7.6. | L1e — L7e | Shock absorbers: yes/no/optional(4) |
| 3.8. | Passenger-compartment heating system and air-conditioning | |
| 3.8.1. | Passenger-compartment heating system | |
| 3.8.1.1. | L2e, L5e-B, L6e-B, L7e | An overall drawing of the heating system giving its location on the vehicle (and the arrangement of the sound damping devices (including the position of the heat exchange points)): … |
| 3.8.1.2. | L2e, L5e-B, L6e-B, L7e | An overall drawing of the heat-exchanger used in systems utilising the heat from the exhaust gases, or of the parts where that exchange takes place (in the case of heating systems using the heat provided by the engine cooling air): … |
| 3.8.1.3. | L2e, L5e-B, L6e-B, L7e | A sectional drawing of the heat-exchanger or parts where heat exchange takes place, together with a statement of the wall thickness, of the materials used and the characteristics of their surface: … |
| 3.8.1.4. | L2e, L5e-B, L6e-B, L7e | Specifications regarding the method of manufacture and technical data relating to other major components of the heating system, such as the fan: … |
| 3.8.2. | Air-conditioning | |
| 3.8.2.1. | L2e, L5e-B, L6e-B, L7e | Brief description and schematic drawing of air-conditioning and its control system: … |
| 3.8.2.2. | L2e, L5e-B, L6e-B, L7e | Gas used as refrigerant in the air-conditioning system: … |
| 3.8.2.3. | L2e, L5e-B, L6e-B, L7e | The air-conditioning system is designed to contain fluorinated greenhouse gases with global warming potential higher than 150: yes/no(4). If Yes, fill in the following sections: |
| 3.8.2.3.1. | L2e, L5e-B, L6e-B, L7e | Drawing and brief description of the air-conditioning system, including the reference or part number and material of the leak components: … |
| 3.8.2.3.2. | L2e, L5e-B, L6e-B, L7e | Leakage of the air-conditioning system |
| 3.8.2.3.3. | L2e, L5e-B, L6e-B, L7e | Reference or part number and material of the components of the system and test information (e.g. test report number, Type-approval number, etc.): … |
| 3.8.2.3.4. | L2e, L5e-B, L6e-B, L7e | Overall leakage/year of the entire system: … g/year |
| 3.9. | Cycles designed to pedal | |
| 3.9.1. | L1e | Ratio manpower/electric power: … |
| 3.9.2. | L1e | Maximum assistance factor: … |
| 3.9.3. | L1e | Maximum vehicle speed for which the electric motor gives assistance: … km/h |
| 3.9.4. | L1e | Switch-off distance: … km |
| 4. | GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE | |
| 4.0 | General information on environmental and propulsion performance | |
| 4.0.1. | L1e — L7e | Environmental step: Euro (3/4/5/5+) (4) |
| 4.0.2. | L1e — L7e | Fuel consumption (provide details for each reference fuel tested) … l/kg(4)/100 km |
| 4.0.3. | L1e — L7e | CO2 emissions(25): … g/km |
| 4.0.4. | L1e — L7e | Energy consumption(25): … Wh/km |
| 4.0.5. | L1e — L7e | Electric range(25): … km |
| 4.1. | Tailpipe emission-control system | |
| 4.1.1. | L1e — L7e | Brief description and schematic drawing of the tailpipe emission-control system and its control: … |
| 4.1.2. | Catalytic converter | |
| 4.1.2.1. | L1e — L7e | Configuration, number of catalytic converters and elements (information to be provided for each separate unit): … |
| 4.1.2.2. | L1e — L7e | Drawing with dimensions, shape and volume of the catalytic converter(s): … |
| 4.1.2.3. | L1e — L7e | Catalytic reaction: … |
| * 4.1.2.4. | L1e — L7e | Total charge of precious metals: … |
| * 4.1.2.5. | L1e — L7e | Relative concentration: … |
| * 4.1.2.6. | L1e — L7e | Substrate (structure and material): … |
| * 4.1.2.7. | L1e — L7e | Cell density: … |
| * 4.1.2.8. | L1e — L7e | Casing for the catalytic converter(s): … |
| 4.1.2.9. | L1e — L7e | Location of the catalytic converter(s) (place and reference distance in the exhaust line): … |
| 4.1.2.10. | L1e — L7e | Catalyst heat-shield: yes/no(4) |
| 4.1.2.11. | L1e — L7e | Brief description and schematic drawing of the regeneration system/method of exhaust after-treatment systems and its control system: … |
| * 4.1.2.11.1. | L1e — L7e | Normal operating temperature range: … K |
| 4.1.2.11.2. | L1e — L7e | Consumable reagents: yes/no(4) |
| 4.1.2.11.3. | L1e — L7e | Brief description and schematic drawing of the reagent flow (wet) system and its control system: … |
| 4.1.2.11.4. | L1e — L7e | Type and concentration of reagent needed for catalytic action: … |
| * 4.1.2.11.5. | L1e — L7e | Normal operational temperature range of reagent: … K |
| 4.1.2.11.6. | L1e — L7e | Frequency of reagent refill: continuous/maintenance(4) |
| 4.1.2.12. | L1e — L7e | Identifying part number: … |
| 4.1.3. | Oxygen sensor(s) | |
| 4.1.3.1. | L1e — L7e | Oxygen sensor component(s) drawing(s): … |
| 4.1.3.2. | L1e — L7e | Drawing of exhaust device with oxygen sensor location(s) (dimensions relative to exhaust valves): … |
| 4.1.3.3. | L1e — L7e | Control range(s): … |
| 4.1.3.4. | L1e — L7e | Identifying part number(s): … |
| 4.1.3.5. | L1e — L7e | Description of oxygen sensor heating system and heating strategy: … |
| 4.1.3.6. | L1e — L7e | Oxygen sensor heat shield(s): yes/no(4) |
| 4.1.4. | Secondary air-injection (air-inject in exhaust) | |
| 4.1.4.1. | L1e — L7e | Brief description and schematic drawing of the secondary air-injection system and its control system: … |
| 4.1.4.2. | L1e — L7e | Configuration (mechanical, pulse air, air pump etc.)(4): … |
| 4.1.4.3. | L1e — L7e | Working principle: … |
| 4.1.5. | External exhaust gas recirculation (EGR) | |
| 4.1.5.1. | L1e — L7e | Brief description and schematic drawing of the EGR system (exhaust flow) and its control system: … |
| 4.1.5.2. | L1e — L7e | Characteristics: … |
| 4.1.5.3. | L1e — L7e | Water-cooled EGR system: yes/no(4) |
| 4.1.5.4. | L1e — L7e | Air-cooled EGR system: yes/no(4) |
| 4.1.6. | Particulate filter | |
| 4.1.6.1. | L1e — L7e | PT component drawing with dimensions, shape and capacity of the particulate filter: … |
| 4.1.6.2. | L1e — L7e | Design of the particulate filter: … |
| 4.1.6.3. | L1e — L7e | Brief description and schematic drawing of the particulate filter and its control system: … |
| 4.1.6.4. | L1e — L7e | Location (reference distance in the exhaust line): … |
| 4.1.6.5. | L1e — L7e | Method or system of regeneration, description and drawing: … |
| 4.1.6.6. | L1e — L7e | Identifying part number: … |
| 4.1.7. | Lean NOx trap | |
| 4.1.7.1. | L1e — L7e | Operation principle of lean NOx trap: … |
| 4.1.8. | Additional tailpipe emission-control devices (if any not covered under another heading) | |
| 4.1.8.1. | L1e — L7e | Working principle: … |
| 4.2. | Crankcase emission control system | |
| 4.2.1. | L1e — L7e | Configuration of crank-case gas recycling system (breather system, positive crank-case ventilation system, other)(4) (description and drawings). |
| 4.3. | Evaporative emission control system | |
| 4.3.1. | L1e — L7e | Evaporative emissions control system: yes/no(4) |
| 4.3.2. | L1e — L7e | Drawing of the evaporative control system |
| 4.3.3. | L1e — L7e | Drawing of the canister (including dimensions and indicating vent and purge mechanism) |
| 4.3.4. | L1e — L7e | Working capacity: … g |
| 4.3.5. | L1e — L7e | Adsorption material: … (e.g. charcoal, carbon, synthetic, …) |
| 4.3.6. | L1e — L7e | Housing material: … (e.g. plastic, steel, …) |
| 4.3.7. | L1e — L7e | Schematic drawing of the fuel tank, indicating capacity and material: … |
| 4.3.8. | L1e — L7e | Drawing of the heat-shield between tank and exhaust device: … |
| 4.4. | Additional information on environmental and propulsion unit performance | |
| 4.4.1. | L1e — L7e | Description and/or schematic drawings of additional pollution-control devices: … |
| 4.4.2. | L1e — L7e | Location of the coefficient of absorption symbol (compression-ignition engines only): … |
| 4.4.3. | L1e — L7e | Applicable information document set out in respectively UN Regulation No 9, 41 or 63 shall supplement this information document with regard to the sound level. |
| 4.4.4. | L1e — L7e | Applicable information document set out in respectively UN Regulation No 92 shall supplement this information document with regards to the noise-abatement devices installed on the vehicle. |
| 5. | VEHICLE PROPULSION FAMILY | |
| 5.1. | L1e — L7e | To define the vehicle propulsion family, the manufacturer shall submit the information required for classification criteria set out in point 3 of Annex XI to Commission Delegated Regulation (EU) No 134/2014, if not already provided in the information document. |
| 6. | INFORMATION ON FUNCTIONAL SAFETY | |
| 6.1. | Audible warning devices | |
| 6.1.1. | L1e — L7e | Summary description of device(s) used and their purpose: … |
| 6.1.2. | L1e — L7e | Drawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: … |
| 6.1.3. | L1e — L7e | Details of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: … |
| 6.1.4. | L1e — L7e | Electrical/pneumatic circuit diagram: … |
| 6.1.4.1. | L1e — L7e | Voltage: AC/DC(4) |
| 6.1.4.2. | L1e — L7e | Rated voltage or pressure: … |
| 6.1.5. | L1e — L7e | Drawing of the mounting device: … |
| 6.2. | Braking, including anti-lock and combined braking systems | |
| 6.2.1. | L1e — L7e | Characteristics of the brakes, including details and drawings of the drums, discs, hoses, make and type of shoe/pad assemblies and/or linings, effective braking areas, radius of drums, shoes or discs, mass of drums, adjustment devices, relevant parts of the axle(s) and suspension, levers, pedals (4): … |
| 6.2.2. | L1e — L7e | Operating diagram, description and/or drawing of the braking system, including details and drawings of the transmission and controls as well as a brief description of the electrical and/or electronic components used in the braking system(4): |
| 6.2.2.1. | L1e — L7e | Front, rear and sidecar brakes, disc and/or drum(4): |
| 6.2.2.2. | L1e — L7e | Parking braking system: … |
| 6.2.2.3. | L1e — L7e | Any additional braking system: … |
| 6.2.3. | L1e — L7e | Vehicle is equipped to tow a trailer with no brake/overrun brake/electric/pneumatic/hydraulic service brakes: yes/no(4): … |
| 6.2.4. | L1e — L7e | Anti-lock/Combined braking system |
| 6.2.4.1. | L1e — L7e | Anti-lock braking system: yes/no/optional(4) |
| 6.2.4.2. | L1e — L7e | Combined braking system: yes/no/optional(4) |
| 6.2.4.3. | L1e — L7e | Anti-lock and combined braking system: yes/no/optional(4) |
| 6.2.4.4. | L1e — L7e | Schematic drawing(s): … |
| 6.2.5. | L1e — L7e | Hydraulic reservoir(s) (volume and location): … |
| 6.2.6. | L1e — L7e | Particular characteristics of the braking system(s) |
| 6.2.6.1. | L1e — L7e | Brake shoes and/or pads(4): … |
| 6.2.6.2. | L1e — L7e | Linings and/or pads (indicate make, type, grade of material or identification mark): … |
| 6.2.6.3. | L1e — L7e | Brake levers and/or pedals(4): … |
| 6.2.6.4. | L1e — L7e | Other devices (where applicable): drawing and description: … |
| 6.3. | Electrical safety | |
| 6.3.1. | L1e — L7e | Brief description of the power circuit components installation and drawings/photographs showing the location of the power circuit components installation: … |
| 6.3.2. | L1e — L7e | Schematic diagram of all electrical functions included in power circuit: … |
| 6.3.3. | L1e — L7e | Working voltage(s) (V): … |
| 6.3.4. | L1e — L7e | Description of protection against electric-shocks: … |
| 6.3.5. | L1e — L7e | Fuse and/or circuit breaker yes/no/optional(4) |
| 6.3.5.1. | L1e — L7e | Diagram showing the functional range: … |
| 6.3.6. | L1e — L7e | Configuration of power wiring harness: … |
| 6.4. | Front and rear protective structures | |
| 6.4.1. | Front protective structure | |
| 6.4.1.1. | L1e — L7e | Detailed technical description (including photographs or drawings): … |
| 6.4.1.2. | L1e — L7e | Materials used: … |
| 6.4.2. | Rear protective structure | |
| 6.4.2.1. | L1e — L7e | Detailed technical description (including photographs or drawings): … |
| 6.4.2.2. | L1e — L7e | Materials used: … |
| 6.5. | Glazing, windscreen wipers and washers, and defrosting and demisting systems | |
| 6.5.1. | Windscreen | |
| 6.5.1.1. | L2e, L5e, L6e, L7e | Materials used: … |
| 6.5.1.2. | L2e, L5e, L6e, L7e | Method of mounting: … |
| 6.5.1.3. | L2e, L5e, L6e, L7e | Angle of inclination: … |
| 6.5.1.4. | L2e, L5e, L6e, L7e | Windscreen accessories and the position in which they are fitted, together with a brief description of any electrical/electronic components: … |
| 6.5.1.5. | L2e, L5e, L6e, L7e | Drawing of the windscreen with dimensions: … |
| 6.5.2. | Other windows | |
| 6.5.2.1. | L2e, L5e, L6e, L7e | Materials used: … |
| 6.5.2.2 | L2e, L5e, L6e, L7e | A brief description of the electrical/electronic components (if any) of the window lifting mechanism: … |
| 6.5.3. | Opening roof glazing | |
| 6.5.3.1. | L2e, L5e, L6e, L7e | Materials used: … |
| 6.5.4. | Other glass panes | |
| 6.5.4.1. | L2e, L5e, L6e, L7e | Materials used: … |
| 6.6. | Windscreen wiper(s) | |
| 6.6.1. | L2e, L5e, L6e, L7e | Detailed technical description (including photographs or drawings): … |
| 6.7. | Windscreen washer | |
| 6.7.1. | L2e, L5e, L6e, L7e | Detailed technical description (including photographs or drawings): … |
| 6.7.2. | L2e, L5e, L6e, L7e | Capacity of the reservoir: … l |
| 6.8. | Defrosting and demisting | |
| 6.8.1. | L2e, L5e, L6e, L7e | Detailed technical description (including photographs or drawings): … |
| 6.9. | Driver-operated controls including identification of controls, tell-tales and indicators | |
| 6.9.1. | L1e — L7e | Arrangement and identification of controls, tell-tales and indicators: … |
| 6.9.2. | L1e — L7e | Photographs and/or drawings of the arrangement of symbols and controls, tell-tales and indicators: … |
| 6.9.3. | L1e — L7e | Controls, tell-tales and indicators for which, when fitted, identification is mandatory, including the identification symbols to be used for that purpose: |
| 6.9.4. | L1e — L7e | Summary table: the vehicle is equipped with the following driver-operated controls, including indicators and tell-tales(4) Controls, tell-tales and indicators for which, when fitted, identification is mandatory, and symbols to be used for that purpose Symbol No Device Control / indicator available [^E0013] Identified by symbol [^E0013] Where [^E0014] Tell-tale available [^E0013] Identified by symbol [^E0013] Where [^E0014] 1 Master light 2 Dipped-beam head lamps 3 Main-beam head lamps 4 Position (side) lamps 5 Front fog lamps 6 Rear fog lamp 7 Headlamp levelling device 8 Parking lamps 9 Direction indicators 10 Hazard warning 11 Windscreen wiper 12 Windscreen washer 13 Windscreen wiper and washer 14 Headlamp cleaning device 15 Windscreen demisting and defrosting 16 Rear window demisting and defrosting 17 Ventilating fan 18 Diesel pre-heat 19 Choke 20 Brake failure 21 Fuel level 22 Battery charging condition 23 Engine coolant temperature 24 Malfunction indicator light (MI) |
| 6.9.5. | L1e — L7e | Controls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified Symbol No Device Control / indicator available [^E0015] Identified by symbol [^E0015] Where [^E0016] Tell-tale available [^E0015] Identified by symbol [^E0015] Where [^E0016] 1 Parking brake 2 Rear window wiper 3 Rear window washer 4 Rear window wiper and washer 5 Intermittent windscreen wiper 6 Audible warning device (horn) 7 Front hood (bonnet) 8 Rear hood (boot) 9 Seat belt 10 Engine oil pressure 11 Unleaded petrol 12 … 13 … |
| 6.10. | Speedometer and odometer | |
| 6.10.1. | Speedometer | |
| 6.10.1.1. | L1e — L7e | Photographs and/or drawings of the complete system: … |
| 6.10.1.2. | L1e — L7e | Vehicle speed range displayed: … |
| 6.10.1.3. | L1e — L7e | Tolerance of the measuring mechanism of the speedometer: … |
| 6.10.1.4. | L1e — L7e | Technical constant of the speedometer: … |
| 6.10.1.5. | L1e — L7e | Method of operation and description of the drive mechanism: … |
| 6.10.1.6. | L1e — L7e | Overall transmission ratio of the drive mechanism: … |
| 6.10.2. | Odometer | |
| 6.10.2.1. | L1e — L7e | Tolerance of the measuring mechanism of the odometer: … |
| 6.10.2.2. | L1e — L7e | Method of operation and description of the drive mechanism: … |
| 6.11. | Installation of lighting, light-signalling devices, including automatic switching of lighting | |
| 6.11.1. | L1e — L7e | List of all devices (mentioning the number, make(s),type, component type-approval mark(s), the maximum intensity of the main-beam headlamps, colour, the corresponding tell-tale): … |
| 6.11.2. | L1e — L7e | Diagram showing the location of the lighting and light-signalling devices: … |
| 6.11.3. | L1e — L7e | Hazard warning lamps: … |
| 6.11.4. | L1e — L7e | Brief description of the electrical and/or electronic components used in the lighting system and in the light-signalling system: … |
| 6.11.5. | L1e — L7e | For every lamp and reflector, supply the following information (in writing and/or by diagram): |
| 6.11.5.1. | L1e — L7e | Drawing showing the extent of the illuminating surface: … |
| 6.11.5.2. | L1e — L7e | Method used to define the apparent surface in accordance with point 2.10 of UNECE Regulation No 48 (OJ L 323, 6.12.2011, p. 46): … |
| 6.11.5.3. | L1e — L7e | Axis of reference and centre of reference: … |
| 6.11.5.4. | L1e — L7e | Method of operation of concealable lamps: … |
| 6.11.6. | L1e — L7e | Description/drawing and type of headlamp levelling device (e.g. automatic, stepwise manually adjustable, continuously manually adjustable)(4): … |
| 6.11.6.1. | L1e — L7e | Control device: … |
| 6.11.6.2. | L1e — L7e | Reference marks: … |
| 6.11.6.3. | L1e — L7e | Marks assigned for loading conditions: … |
| 6.12. | Rearward visibility | |
| 6.12.1. | Rear-view mirrors (stating for each mirror) | |
| 6.12.1.1. | L1e — L7e | Drawing(s) for the identification of the mirror showing the position of the mirror relative to the vehicle structure: … |
| 6.12.1.2. | L1e — L7e | Details of the method of attachment including that part of the vehicle structure to which it is attached: … |
| 6.12.1.3. | L1e — L7e | A brief description of the electronic components of the adjustment system: … |
| 6.12.2. | L1e — L7e | Devices for indirect vision other than mirrors |
| 6.12.2.1. | L1e — L7e | Description of the device: … |
| 6.12.2.2. | L1e — L7e | In the case of a camera-monitor device, the detection distance (mm), contrast, luminance range, glare correction, display performance (black and white/colour(4)), image repetition frequency, luminance reach of the monitor(4): … |
| 6.12.2.3. | L1e — L7e | Sufficiently detailed drawings to identify the complete device, including installation instructions; the position for the EU type-approval mark has to be indicated on the drawings: … |
| 6.13. | Rollover protective structure (ROPS) | |
| 6.13.1. | L7e-B2 | Detailed technical description, position, fixing, etc. (including photographs or drawings): … |
| 6.13.2. | ROPS by Frame(4) | |
| 6.13.2.1. | L7e-B2 | Internal and external dimensions: … |
| 6.13.2.2. | L7e-B2 | Material(s) and method of construction: … |
| 6.13.3. | ROPS by Cab (4) | |
| 6.13.3.1. | L7e-B2 | Other weather protection arrangements (description): … |
| 6.13.3.2. | L7e-B2 | Internal and external dimensions: … |
| 6.13.4. | ROPS by Roll bar(s) mounted at front/rear(4), fold-down/not fold down (4) | |
| 6.13.4.1. | L7e-B2 | Dimensions: … |
| 6.13.4.2. | L7e-B2 | Material(s) and method of construction: … |
| 6.14. | Safety belts and/or other restraints | |
| 6.14.1. | L2e, L4e, L5e-B, L6e-B, L7e | Number and position of safety belts and restraint systems and seats on which they can be used, please fill out table below: (L = left side, R = right side, C = centre) |
| Safety belt configuration and associated information Complete EU type-approval mark Variant, if applicable Belt adjustment device for height (indicate yes/no/optional) First row of seats Image omitted; see official source L C R Second row of seats Image omitted; see official source L C R L = left, C= centre, R=right | ||
| 6.14.2. | L2e, L4e, L5e-B, L6e-B, L7e | Description of a specific type of belt, with one anchorage attached to the seat back-rest or incorporating an energy-dissipation device: … |
| 6.14.3. | L2e, L4e, L5e-B, L6e-B, L7e | Number and location of the anchorages: … |
| 6.14.4. | L2e, L4e, L5e-B, L6e-B, L7e | Brief description of electrical/electronic components: … |
| 6.15. | Safety belt anchorages | |
| 6.15.1. | L2e, L4e, L5e-B, L6e-B, L7e | Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: … |
| 6.15.2. | L2e, L4e, L5e-B, L6e-B, L7e | Drawings of the anchorages and the parts of the vehicle structure to which they are attached (together with a statement on the nature of the materials used): … |
| 6.15.3. | L2e, L4e, L5e-B, L6e-B, L7e | Designation of the types of belts(14) authorised for attachment to the anchorages on the vehicle: … |
| Safety-belt anchorage configuration and associated information Anchorage location Vehicle structure Seat structure First row of seats Right-hand seat Image omitted; see official source Lower anchorages Upper anchorages Image omitted; see official source outboard inboard Centre seat Image omitted; see official source Lower anchorages Upper anchorages Image omitted; see official source right left Left-hand seat Image omitted; see official source Lower anchorages Upper anchorages Image omitted; see official source outboard inboard Second row of seats Right-hand seat Image omitted; see official source Lower anchorages Upper anchorages Image omitted; see official source outboard inboard Centre seat Image omitted; see official source Lower anchorages Upper anchorages Image omitted; see official source right left Left-hand seat Image omitted; see official source Lower anchorages Upper anchorages Image omitted; see official source outboard inboard | ||
| 6.15.4. | L2e, L4e, L5e-B, L6e-B, L7e | Type-approval mark for each position: … |
| 6.15.5. | L2e, L4e, L5e-B, L6e-B, L7e | Special devices (example: seat-height adjustment, preloading device, etc.): … |
| 6.15.6. | L2e, L4e, L5e-B, L6e-B, L7e | Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: … |
| 6.15.7. | L2e, L4e, L5e-B, L6e-B, L7e | Observation: … |
| 6.16. | Seating positions (saddles and seats) | |
| 6.16.1. | L1e — L7e | Number of seating positions: … |
| 6.16.1.1. | L2e, L5e, L6e, L7e | Location and arrangement(8): … |
| 6.16.2. | L1e — L7e | Seating position configuration: seat/saddle(4) |
| 6.16.3. | L1e — L7e | Description and drawings of: |
| 6.16.3.1. | L1e — L7e | The seats and their anchorages: … |
| 6.16.3.2. | L1e — L7e | The adjustment system: … |
| 6.16.3.3. | L1e — L7e | The displacement and locking systems: … |
| 6.16.3.4. | L1e — L7e | The seat-belt anchorages incorporated in the seat structure: … |
| 6.16.3.5. | L1e — L7e | The parts of the vehicle used as anchorages: … |
| 6.16.4. | L2e, L4e, L5e-B, L6e-B, L7e | Coordinates or drawing of the R-point(s) of all seating positions: … |
| 6.16.4.1. | L2e, L4e, L5e-B, L6e-B, L7e | Driver’s seat: … |
| 6.16.4.2. | L2e, L4e, L5e-B, L6e-B, L7e | All other seating positions: … |
| 6.16.5. | L1e — L7e | Design torso angle: … |
| 6.16.5.1. | L1e — L7e | Driver’s seat: … |
| 6.16.5.2. | L1e — L7e | All other seating positions: … |
| 6.16.6. | L1e — L7e | Range of seat adjustment: … |
| 6.16.6.1. | L1e — L7e | Driver’s seat: … |
| 6.16.6.2. | L1e — L7e | All other seating positions: … |
| 6.17. | Steer-ability, cornering properties and turn-ability | |
| 6.17.1. | L1e — L7e | Schematic diagram of steered axle(s) showing steering geometry: … |
| 6.17.2. | Transmission and control of steering | |
| 6.17.2.1. | L1e — L7e | Configuration of steering transmission (specify for front and rear): … |
| 6.17.2.2. | L1e — L7e | Linkage to wheels (including other than mechanical means; specify for front and rear): … |
| 6.17.2.2.1. | L1e — L7e | A brief description of the electrical/electronic components: … |
| 6.17.2.3. | L1e — L7e | Diagram of the steering transmission: … |
| 6.17.2.4. | L2e, L5e, L6e, L7e | Schematic diagram(s) of the steering control(s): … |
| 6.17.2.5. | L2e, L5e, L6e, L7e | Range and method of adjustment of the steering control(s): … |
| 6.17.2.6. | L2e, L5e, L6e, L7e | Method of assistance: … |
| 6.17.3. | Maximum steering angle of the wheels | |
| 6.17.3.1. | L1e — L7e | To the right: … degrees; number of turns of the steering wheel (or equivalent data): … |
| 6.17.3.2. | L1e — L7e | To the left: … degrees; number of turns of the steering wheel (or equivalent data): … |
| 6.18. | Tyres/wheels combination | |
| 6.18.1. | Tyres: | |
| 6.18.1.1. | Size designation | |
| 6.18.1.1.1. | L1e — L7e | Axle 1: … |
| 6.18.1.1.2. | L1e — L7e | Axle 2: … |
| 6.18.1.1.3. | L4e | Sidecar wheel: … |
| 6.18.1.2. | L1e — L7e | Minimum load-capacity index: … with the maximum load on each tyre: … kg |
| 6.18.1.3. | L1e — L7e | Minimum-speed category symbol compatible with the theoretical maximum design vehicle speed: … |
| 6.18.1.4. | L1e — L7e | Tyre pressure(s) as recommended by the vehicle manufacturer: … kPa |
| 6.18.2. | Wheels: | |
| 6.18.2.1. | L1e — L7e | Rim size(s): … |
| 6.18.2.2. | L1e — L7e | Categories of use compatible with the vehicle: … |
| 6.18.2.3. | L1e — L7e | Nominal rolling circumference: … |
| 6.19. | Vehicle maximum speed limitation plate and its location on the vehicle | |
| 6.19.1. | L7e-B1 and L7e-B2 | Maximum speed limitation plate (indicate the reflecting material used; drawings and photos may be used as appropriate): … |
| 6.19.2. | L7e-B1 and L7e-B2 | Location of maximum speed limitation plate (indicate variants where necessary; drawings and photos may be used as appropriate): … |
| 6.19.3. | L7e-B1 and L7e-B2 | Height above road surface, upper edge: … mm |
| 6.19.4. | L7e-B1 and L7e-B2 | Height above road surface, lower edge: … mm |
| 6.19.5. | L7e-B1 and L7e-B2 | Distance of the centre line from the longitudinal median plane of the vehicle: … mm |
| 6.19.6. | L7e-B1 and L7e-B2 | Distance from the left vehicle edge: … mm |
| 6.20. | Vehicle occupant protection, including interior fittings and vehicle doors | |
| 6.20.1. | Bodywork | |
| 6.20.1.1. | L2e, L5e-B, L6e-B, L7e | Materials used and methods of construction: … |
| 6.20.2. | Occupant doors, latches and hinges | |
| 6.20.2.1. | L2e, L5e, L6e, L7e | Number of doors, and its configuration, dimensions and maximum angle of opening(5): … |
| 6.20.2.2. | L2e, L5e, L6e, L7e | Drawing of latches and hinges and of their position in the doors: … |
| 6.20.2.3. | L2e, L5e, L6e, L7e | Technical description of latches and hinges: … |
| 6.20.2.4. | L2e, L5e, L6e, L7e | Details, including dimensions, of entrances, steps and necessary handles where applicable: … |
| 6.20.3. | Interior protection for occupants | |
| 6.20.3.1. | L2e, L5e, L6e, L7e | Photographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: … |
| 6.20.4. | Head restraints | |
| 6.20.4.1. | L2e, L5e, L6e, L7e | Head restraints: integrated/detachable/separate(4) |
| 6.20.4.2. | L2e, L5e, L6e, L7e | Detailed description of the head restraint, specifying in particular the nature of the padding material or materials and, where applicable, the position and specifications of the braces and anchorage pieces for the type of seat for which approval is sought: … |
| 6.20.4.3. | L2e, L5e, L6e, L7e | In the case of a ‘separate’ head restraint |
| 6.20.4.3.1. | L2e, L5e, L6e, L7e | Detailed description of the structural zone to which the head restraint is intended to be fixed: … |
| 6.20.4.3.2. | L2e, L5e, L6e, L7e | Scale drawings of the significant parts of the structure and the head restraint: … |
| 6.21. | Maximum continuous total power and/or maximum vehicle speed limitation by design | |
| 6.21.1. | Propulsion and/or drive-train output governors | |
| 6.21.1.1. | L1e — L7e | Number (minimum two, exemption L3e-A3 and L4e-A3): |
| 6.21.1.2. | L1e — L7e | How is the redundancy of governors ensured?: … |
| 6.21.1.3. | L1e — L7e | Nominal cut-off point no 1: … |
| 6.21.1.3.1. | L1e — L7e | Engine/motor/drive-train rotation speed at which cut-off starts under load: … min-1 |
| 6.21.1.3.2. | L1e — L7e | Maximum rotation speed at the minimum engine load: … min-1 |
| 6.21.1.4. | L1e — L7e | Nominal cut-off point no 2: … |
| 6.21.1.4.1 | L1e — L7e | Engine/motor/drive-train rotation speed at which cut-off starts under load(4): … min-1 |
| 6.21.1.4.2. | L1e — L7e | Maximum rotation speed at the minimum engine load: … min-1 |
| 6.21.1.5. | L1e — L7e | The stated purpose of governor(s): maximum design vehicle speed limitation/maximum power limitation/engine over-speed protection(4): … |
| 7. | INFORMATION ON VEHICLE CONSTRUCTION | |
| 7.1. | Coupling devices and attachments | |
| 7.1.1. | L1e — L7e | L-category vehicle equipped with coupling device: yes/no/optional(4) |
| 7.1.2. | L1e — L7e | Guidelines and information for consumers in all EU languages regarding the impact on the driveability of using a trailer with an L-category vehicle included in the owner's manual: yes/no(4) |
| 7.1.3. | L1e — L7e | For coupling-device approved as separate technical unit: installation and operating instructions added to documentation: yes/no(4) |
| 7.1.4. | L1e — L7e | Photographs and/or drawings showing the position and the construction of the coupling-devices: … |
| 7.1.5. | L1e — L7e | Instructions for attaching the coupling-type to the vehicle and photographs or drawings of the fixing points on the vehicle as stated by the manufacturer; additional information, if the use of the coupling-type is restricted to certain variants or versions of the vehicle type: … |
| 7.1.6. | L1e — L7e | Attachment points for a secondary coupling and/or breakaway cable (drawings and pictures may be used as appropriate): yes/no(4) |
| 7.2. | Devices to prevent unauthorised use | |
| 7.2.1. | Protective device | |
| 7.2.1.1. | L1e — L7e | Summary description of protective device(s) used: … |
| 7.2.2. | Vehicle immobiliser | |
| 7.2.2.1. | L1e — L7e | Technical description of the vehicle immobiliser and of the measures taken against inadvertent activation: … |
| 7.2.3. | Alarm system | |
| 7.2.3.1. | L1e — L7e | Description of the alarm system and of the vehicle parts involved in its installation: … |
| 7.2.3.2. | L1e — L7e | List of the main components comprising the alarm system: … |
| 7.3. | Electromagnetic compatibility (EMC) | |
| 7.3.1. | L1e — L7e | Requirements under UNECE Regulation No 10 (OJ L 254, 20.9.2012, p. 1) are met with relevant documentation included in the information document: yes/no(4) |
| 7.3.2. | L1e — L7e | Table or drawing of radio-interference control equipment: … |
| 7.3.3. | L1e — L7e | Particulars of the nominal value of the direct-current resistance, and, in the case of resistive ignition cables, of their nominal resistance per metre: … |
| 7.4. | External projections | |
| 7.4.1. | L1e — L7evehicles with bodywork | General arrangement (drawing or photographs accompanied if necessary by dimensional details and/or text) indicating the position of the attached sections and views, of any parts of the exterior surface which can be regarded as critical for external projections, for example, and where relevant: bumpers, floor line, door and window pillars, air-intake grilles, radiator grille, windscreen wipers, rain gutter channels, handles, slide rails, flaps, door hinges and locks, hooks, eyes, winches, decorative trim, badges, emblems and recesses and any other parts of the exterior surface which can be regarded as critical (e.g. lighting equipment): … |
| 7.5. | Fuel storage | |
| 7.5.1. | Fuel tank(s) | |
| 7.5.1.1. | Main fuel tank(s) | |
| 7.5.1.1.1. | L1e — L7e | Maximum capacity: … |
| 7.5.1.1.2. | L1e — L7e | Materials used: … |
| 7.5.1.1.3. | L1e — L7e | Fuel tank inlet: restricted orifice/label(4) … |
| 7.5.1.2. | Reserve fuel tank(s) | |
| 7.5.1.2.1. | L1e — L7e | Maximum capacity: … |
| 7.5.1.2.2. | L1e — L7e | Materials used: … |
| 7.5.1.2.3. | L1e — L7e | Fuel tank inlet: restricted orifice/label(4) … |
| 7.5.1.3. | L1e — L7e | Drawing and technical description of the tank(s) with connections and lines of the breathing and venting system, locks, valves, fastening devices: … |
| 7.5.1.4. | L1e — L7e | Drawing clearly showing the position of the tank(s) in the vehicle: … |
| 7.5.1.5. | L1e — L7e | Drawing of the heat shield between tank and exhaust device: … |
| 7.5.2. | Compressed natural gas (CNG) container(s) | |
| 7.5.2.1. | L1e — L7e | Applicable information document set out in UNECE regulation No 110 [^E0011] as prescribed for vehicle category M1 shall supplement this information document with regards to the CNG tanks installed on the vehicle. |
| 7.5.3. | L1e — L7e | Liquefied petroleum gas (LPG)container(s) |
| 7.5.3.1. | L1e — L7e | Applicable information document set out in UNECE regulation No 67 [^E0012] as prescribed for vehicle category M1 shall supplement this information document with regards to the LPG tanks installed on the vehicle. |
| 7.6. | On-board diagnostics (OBD) functional requirements | |
| 7.6.1 | On-board diagnostics system | |
| 7.6.1.1. | L1e — L7e | Stage I: yes/no(4) and/or |
| 7.6.1.2. | L1e — L7e | Stage II: yes/no(4) |
| 7.6.2. | OBD system general information | |
| 7.6.2.1. | L3e—L7e(10) | Written description and/or drawing of the malfunction indicator (MI): … |
| 7.6.2.2. | L3e—L7e(10) | List and purpose of all components monitored by the OBD system: … |
| 7.6.2.3. | L3e— L7e(10) | Written description (general working principles) for all OBD stage I circuit (open circuit, shorted low and high, rationality) and electronics (PCU/ECU internal and communication) diagnostics: … |
| 7.6.2.4. | L3e—L7e(10) | Written description (general working principles) for all OBD stage I diagnostic functionality triggering any operating mode which significantly reduces engine torque in case of fault detection: … |
| 7.6.2.5. | L3e— L7e(10) | Written description of the communication protocol(s) supported: … |
| 7.6.2.6. | L3e—L7e(10) | Physical location of diagnostic-connector (add drawings and photographs): … |
| 7.6.2.7. | L3e— L7e(10) | Written description in case of voluntary compliance with OBD stage II (general working principles): |
| 7.6.2.7.1. | L3e — L7e(10) | Positive-ignition engines |
| 7.6.2.7.1.1. | L3e — L7e(10) | Catalyst monitoring: … |
| 7.6.2.7.1.2. | L3e — L7e(10) | Misfire detection: … |
| 7.6.2.7.1.3. | L3e — L7e(10) | Oxygen sensor monitoring: … |
| 7.6.2.7.1.4. | L3e — L7e(10) | Other components monitored by the OBD system: … |
| 7.6.2.7.2. | L3e — L7e(10) | Compression-ignition engines |
| 7.6.2.7.2.1. | L3e — L7e(10) | Catalyst monitoring: … |
| 7.6.2.7.2.2. | L3e — L7e(10) | Particulate filter monitoring: … |
| 7.6.2.7.2.3. | L3e — L7e(10) | Electronic fuelling system monitoring: … |
| 7.6.2.7.2.4. | L3e — L7e(10) | deNOx system monitoring: … |
| 7.6.2.7.2.5. | L3e — L7e(10) | Other components monitored by the OBD system: … |
| 7.6.2.7.3 | L3e — L7e(10) | Criteria for MI activation (fixed number of driving cycles or statistical method): … |
| 7.6.2.7.4. | L3e — L7e(10) | List of all OBD output codes and formats used (with explanation of each): … |
| 7.6.3. | OBD compatibility The following additional information shall be provided by the vehicle manufacturer to enable the manufacture of OBD-compatible replacement or service parts, diagnostic tools and test equipment: | |
| 7.6.3.1. | L3e — L7e(10) | A comprehensive document describing all sensed components concerned with the strategy for fault detection and MI activation (fixed number of driving cycles or statistical method). This shall, include a list of relevant secondary sensed parameters for each component monitored by the OBD system. The document shall also list all OBD output codes and formats (with an explanation of each) used in association with individual emission-related powertrain components and individual non-emission-related components, where monitoring the component is used to determine MI activation. This shall contain, in particular, a comprehensive explanation for the data given in service $05 Test ID $ 21 to FF and the data given in service $06: … |
| 7.6.3.2. | L3e — L7e(10) | For vehicle types using a communication link in accordance with ISO 15765-4 ‘Road vehicles, diagnostics on controller area network (CAN) — Part 4: requirements for emissions-related systems’, the manufacturer shall provide a comprehensive explanation for the data given in service $06 Test ID $00 to FF, for each OBD monitor ID supported: … |
| 7.6.3.3. | L3e — L7e(10) | The information required above may be provided in table form as described below. |
| Example OBD fault-code overview list Component Fault code Monitoring strategy Fault detection criteria MI activation criteria Secondary parameters Preconditioning Demonstration test Intake air temperature sensor open circuit P0xxxxzz Comparison with temperature model after cold start > 20 degr difference between measured and modelled intake air temperature 3rd cycle Coolant and intake air temperature sensor signals Two type I cycles Type I | Example OBD fault-code overview list Component Fault code Monitoring strategy Fault detection criteria MI activation criteria Secondary parameters Preconditioning Demonstration test Intake air temperature sensor open circuit P0xxxxzz Comparison with temperature model after cold start > 20 degr difference between measured and modelled intake air temperature 3rd cycle Coolant and intake air temperature sensor signals Two type I cycles Type I | |
| 7.6.3.4. | L3e — L7e(10) | Description of ETC diagnostic fault codes: … |
| 7.6.3.5. | L3e — L7e(10) | Description of the default modes which a driver may experience in case of an ETC failure |
| 7.6.4. | Communication protocol information The following information shall be referenced to a specific vehicle make, model and variant, or identified using other workable definitions such as VIN or vehicle and systems identification: | |
| 7.6.4.1. | L3e — L7e(10) | Any protocol information system needed to enable complete diagnostics in addition to the standards prescribed in point 3.8. of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 44/2014, such as additional hardware or software protocol information, parameter identification, transfer functions, ‘keep alive’ requirements, or error conditions; |
| 7.6.4.2. | L3e — L7e(10) | Details of how to obtain and interpret all fault codes not in accordance with the standards prescribed in point 3.11. of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 44/2014 |
| 7.6.4.3. | L3e — L7e(10) | A list of all available live data parameters including scaling and access information; |
| 7.6.4.4. | L3e — L7e(10) | A list of all available functional tests including device activation or control and the means to implement them; |
| 7.6.4.5. | L3e — L7e(10) | Details of how to obtain all component and status information, time stamps, pending DTC and freeze frames; |
| 7.6.4.6. | L3e — L7e(10) | PCU/ECU identification and variant coding; |
| 7.6.4.7. | L3e — L7e(10) | Details of how to reset service lights; |
| 7.6.4.8. | L3e — L7e(10) | Location of diagnostic connector and connector details; |
| 7.6.4.9. | L3e — L7e(10) | Engine code identification. |
| 7.6.5. | Test and diagnosis of OBD monitored components | |
| 7.6.5.1. | L3e — L7e(10) | A description of tests to confirm its functionality, at the component or in the harness: |
| 7.7. | Passenger handholds and footrests | |
| 7.7.1. | Handholds | |
| 7.7.1.1. | L1e — L7e | Configuration: strap and/or handle(4) |
| 7.7.1.3. | L1e — L7e | Photographs and/or drawings showing the location and the construction: |
| 7.7.2. | Footrests | |
| 7.7.2.1. | L1e — L7e | Photographs and/or drawings showing the location and the construction: |
| 7.8. | Registration plate space | |
| 7.8.1. | L1e — L7e | Location of rear registration plate (indicate variants where necessary; drawings may be used as appropriate): … |
| 7.8.1.1. | L1e — L7e | Height above road surface, upper edge: … mm |
| 7.8.1.2. | L1e — L7e | Height above road surface, lower edge: … mm |
| 7.8.1.3. | L1e — L7e | Distance of the centre line from the longitudinal median plane of the vehicle: … mm |
| 7.8.1.4. | L1e — L7e | Dimensions (length x width): … mm x … mm |
| 7.8.1.5. | L1e — L7e | Inclination of the plane to the vertical: … degr. |
| 7.8.1.6. | L1e — L7e | Angle of visibility in the horizontal plane: … degr |
| 7.9. | Stands | |
| 7.9.1. | L1e, L3e | Configuration: central and/or side(4): … |
| 7.9.2. | L1e, L3e | Construction material used: … |
| 7.9.3. | L1e, L3e | Photographs and drawings showing the location of the stand(s) in relation to the structure of the vehicle: … |
| 7.9.4. | L1e, L3e | Description of the method to prevent contact of the stand with the ground when the vehicle is being propelled: … |
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.