LegalizeCommission Implementing Regulation (EU) No 901/2014 of 18 July 2014 implementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles Text with EEA relevance
x = yes - = no or not separately available o = optional.
d = directly on control, indicator or tell-tale c = in close vicinity.
x = yes - = no or not separately available o = optional.
d = directly on control, indicator or tell-tale c = in close vicinity.
OJ L 72, 14.3.2008, p. 1.
OJ L 120, 7.5.2011, p. 1.
Regulation (EC) No 79/2009 of the European Parliament and of the Council of 14 January 2009 on type-approval of hydrogen-powered motor vehicles, and amending Directive 2007/46/EC (OJ L 35, 4.2.2009, p. 32).
OJ L 120, 7.5.2011, p. 1.
OJ L 72, 14.3.2008, p. 1.
Appendix 1
Model information document relating to EU type-approval of a type of/ a type of a vehicle with regard to(4) a tailpipe pollution-control system
| Item No | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| 0.11. | L1e — L7e | Type-approval marks for components and separate technical units(19): … |
| 0.11.1. | L1e — L7e | Method of attachment: … |
| 0.11.2. | L1e — L7e | Photographs and/or drawings of the location of the type-approval mark (completed example with dimensions): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.8. | Propulsion unit performance | |
| 1.8.1. | L3e, L4e, L5e, L7e-A, L7e-B2 | Declared maximum vehicle speed: … km/h |
| 1.8.2. | L1e, L2e, L6e, L7e-B1, L7e-C | Maximum design vehicle speed (22): … km/h and gear in which it is reached: … |
| 1.8.3. | L1e — L7e | Maximum net power combustion engine: … kW at … min–1at A/F ratio: … |
| 1.8.4. | L1e — L7e | Maximum net torque combustion engine: … Nm at … min–1at A/F ratio: … |
| 1.8.5. | L1e — L7e | Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1 |
| 1.8.6. | L1e — L7e | Maximum continuous-rated torque electric motor: … Nm at … min–1 |
| 1.8.7. | L1e — L7e | Maximum continuous total power for propulsion(s): … kW at … min–1 at A/F ratio: … |
| 1.8.8. | L1e — L7e | Maximum continuous total torque for propulsion(s): … Nm at … min–1 at A/F ratio: … |
| 1.8.9. | L1e — L7e | Maximum peak power for propulsion(s): … kW at … min–1at A/F ratio: … |
| 4. | GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION UNIT PERFORMANCE | |
| 4.1. | Tailpipe emission-control system | |
| 4.1.1. | L1e — L7e | Brief description and schematic drawing of the tailpipe emission-control system and its control: |
| 4.1.2. | Catalytic converter | |
| 4.1.2.1. | L1e — L7e | Configuration, number of catalytic converters and elements (information to be provided for each separate unit): … |
| 4.1.2.2. | L1e — L7e | Drawing with dimensions, shape and volume of the catalytic converter(s): … |
| 4.1.2.3. | L1e — L7e | Catalytic reaction: … |
| * 4.1.2.4. | L1e — L7e | Total charge of precious metals: … |
| * 4.1.2.5. | L1e — L7e | Relative concentration: … |
| * 4.1.2.6. | L1e — L7e | Substrate (structure and material): … |
| * 4.1.2.7. | L1e — L7e | Cell density: … |
| * 4.1.2.8. | L1e — L7e | Casing for the catalytic converter(s): … |
| 4.1.2.9. | L1e — L7e | Location of the catalytic converter(s) (place and reference distance in the exhaust line): … |
| 4.1.2.10. | L1e — L7e | Catalyst heat-shield: yes/no(4) |
| 4.1.2.11. | L1e — L7e | Brief description and schematic drawing of the regeneration system/method of exhaust after-treatment systems and its control system: … |
| 4.1.2.11.1. | L1e — L7e | Normal operating temperature range: … K |
| 4.1.2.11.2. | L1e — L7e | Consumable reagents: yes/no(4) |
| 4.1.2.11.3. | L1e — L7e | Brief description and schematic drawing of the reagent flow (wet) system and its control system: … |
| 4.1.2.11.4. | L1e — L7e | Type and concentration of reagent needed for catalytic action: … |
| 4.1.2.11.5. | L1e — L7e | Normal operational temperature range of reagent: … K |
| 4.1.2.12. | L1e — L7e | Identifying part number: … |
| 4.1.3. | Oxygen sensor(s) | |
| 4.1.3.1. | L1e — L7e | Oxygen sensor component(s) drawing(s): … |
| 4.1.3.2. | L1e — L7e | Drawing of exhaust device with oxygen sensor location(s) (dimensions relative to exhaust valves): … |
| 4.1.3.3. | L1e — L7e | Control range(s): … |
| 4.1.3.4. | L1e — L7e | Identifying part number(s): … |
| 4.1.3.5. | L1e — L7e | Description of oxygen sensor heating system and heating strategy: … |
| 4.1.3.6. | L1e — L7e | Oxygen sensor heat shield(s): yes/no(4) |
| 4.1.4. | Secondary air-injection (air-inject in exhaust) | |
| 4.1.4.1. | L1e — L7e | Brief description and schematic drawing of the secondary air-injection system and its control system: … |
| 4.1.4.2. | L1e — L7e | Configuration (mechanical, pulse air, air pump etc.)(4): … |
| 4.1.4.3. | L1e — L7e | Working principle: … |
| 4.1.5. | External exhaust gas recirculation (EGR) | |
| 4.1.5.1. | L1e — L7e | Brief description and schematic drawing of the EGR system (exhaust flow) and its control system: … |
| 4.1.6. | Particulate filter | |
| 4.1.6.1. | L1e — L7e | PT component drawing with dimensions, shape and capacity of the particulate filter: … |
| 4.1.6.2. | L1e — L7e | Design of the particulate filter: … |
| 4.1.6.3. | L1e — L7e | Brief description and schematic drawing of the particulate filter and its control system: … |
| 4.1.6.4. | L1e — L7e | Location (reference distance in the exhaust line): … |
| 4.1.6.5. | L1e — L7e | Method or system of regeneration, description and drawing: … |
| 4.1.6.6. | L1e — L7e | Identifying part number: … |
| 4.1.7. | Lean NOx trap | |
| 4.1.7.1. | L1e — L7e | Operation principle of lean NOx trap: … |
| 4.1.8. | Additional tailpipe emission-control devices (if any not covered under another heading) | |
| 4.1.8.1. | L1e — L7e | Working principle: … |
| 5. | VEHICLE PROPULSION FAMILY | |
| 5.1. | L1e — L7e | To define the vehicle propulsion family, the manufacturer shall submit the information required for classification criteria set out in point 3 of Annex XI to Commission Delegated Regulation (EU) No 134/2014, if not already provided in the information document. |
Appendix 2
Model information document relating to EU type-approval of a type of/a type of a vehicle with regard to(4) a crankcase and evaporative emissions system
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): … | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| 0.11. | L1e — L7e | Type-approval marks for components and separate technical units(19): … |
| 0.11.1. | L1e — L7e | Method of attachment: … |
| 0.11.2. | L1e — L7e | Photographs and/or drawings of the location of the type-approval mark (completed example with dimensions): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 4. | GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION UNIT PERFORMANCE | |
| 4.2. | Crankcase emission control system | |
| 4.2.1. | L1e — L7e | Configuration of crank-case gas recycling system (breather system, positive crank-case ventilation system, other)(4) (description and drawings). |
| 4.3. | Evaporative emission control system | |
| 4.3.1. | L1e — L7e | Evaporative emissions control system: yes/no(4) |
| 4.3.2. | L1e — L7e | Drawing of the evaporative control system: … |
| 4.3.3. | L1e — L7e | Drawing of the canister (including dimensions and indicating vent and purge mechanism): … |
| 4.3.4. | L1e — L7e | Working capacity: … g |
| 4.3.5. | L1e — L7e | Adsorption material: … (e.g. charcoal, carbon, synthetic, …) |
| 4.3.6. | L1e — L7e | Housing material: … (e.g. plastic, steel, …) |
| 4.3.7. | L1e — L7e | Schematic drawing of the fuel tank, indicating capacity and material: … |
| 4.3.8. | L1e — L7e | Drawing of the heat-shield between tank and exhaust device: … |
| 5. | VEHICLE PROPULSION FAMILY | |
| 5.1. | L1e — L7e | To define the vehicle propulsion family, the manufacturer shall submit the information required for classification criteria set out in point 3 of Annex XI to Commission Delegated Regulation (EU) No 134/2014, if not already provided in the information document. |
Appendix 3
Model information document relating to EU type-approval of a type of/a type of a vehicle with regard to(4) an on-board diagnostic (OBD) system
| Item No | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| 0.11. | L1e — L7e | Type-approval marks for components and separate technical units(19): … |
| 0.11.1. | L1e — L7e | Method of attachment: … |
| 0.11.2. | L1e — L7e | Photographs and/or drawings of the location of the type-approval mark (completed example with dimensions): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 4. | GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION UNIT PERFORMANCE | |
| 4.0 | General information on environmental and propulsion performance | |
| 4.0.1. | L1e — L7e | Environmental step: Euro (3/4/5/5+) (4) |
| 4.0.2. | L1e — L7e | Fuel consumption (provide details for each reference fuel tested) … l/kg(4)/100 km |
| 4.0.3. | L1e — L7e | CO2 emissions(25): … g/km |
| 4.0.4. | L1e — L7e | Energy consumption(25): … Wh/km |
| 4.0.5. | L1e — L7e | Electric range(25): … km |
| 5. | VEHICLE PROPULSION FAMILY | |
| 5.1. | L1e — L7e | To define the vehicle propulsion family, the manufacturer shall submit the information required for classification criteria set out in point 3 of Annex XI to Commission Delegated Regulation (EU) No 134/2014, if not already provided in the information document. |
| 7. | INFORMATION ON VEHICLE CONSTRUCTION | |
| 7.6. | On-board diagnostics (OBD) functional requirements | |
| 7.6.1 | On-board diagnostics system | |
| 7.6.1.1. | L1e — L7e | Stage I: yes/no(4) and/or |
| 7.6.1.2. | L1e — L7e | Stage II: yes/no(4) |
| 7.6.2. | OBD system general information | |
| 7.6.2.1. | L3e — L7e(10) | Written description and/or drawing of the malfunction indicator (MI): … |
| 7.6.2.2. | L3e — L7e(10) | List and purpose of all components monitored by the OBD system: … |
| 7.6.2.3. | L3e — L7e(10) | Written description (general working principles) for all OBD stage I circuit (open circuit, shorted low and high, rationality) and electronics (PCU/ECU internal and communication) diagnostics: … |
| 7.6.2.4. | L3e — L7e(10) | Written description (general working principles) for all OBD stage I diagnostic functionality triggering any operating mode which significantly reduces engine torque in case of fault detection: … |
| 7.6.2.5. | L3e — L7e(10) | Written description of the communication protocol(s) supported: … |
| 7.6.2.6. | L3e — L7e(10) | Physical location of diagnostic-connector (add drawings and photographs): … |
| 7.6.2.7. | L3e — L7e(10) | Written description in case of voluntary compliance with OBD stage II (general working principles): |
| 7.6.2.7.1. | L3e — L7e(10) | Positive-ignition engines |
| 7.6.2.7.1.1. | L3e — L7e(10) | Catalyst monitoring: … |
| 7.6.2.7.1.2. | L3e — L7e(10) | Misfire detection: … |
| 7.6.2.7.1.3. | L3e — L7e(10) | Oxygen sensor monitoring: … |
| 7.6.2.7.1.4. | L3e — L7e(10) | Other components monitored by the OBD system: … |
| 7.6.2.7.2. | L3e — L7e(10) | Compression-ignition engines |
| 7.6.2.7.2.1. | L3e — L7e(10) | Catalyst monitoring: … |
| 7.6.2.7.2.2. | L3e — L7e(10) | Particulate filter monitoring: … |
| 7.6.2.7.2.3. | L3e — L7e(10) | Electronic fuelling system monitoring: … |
| 7.6.2.7.2.4. | L3e — L7e(10) | deNOx system monitoring: … |
| 7.6.2.7.2.5. | L3e — L7e(10) | Other components monitored by the OBD system: … |
| 7.6.2.7.3 | L3e — L7e(10) | Criteria for MI activation (fixed number of driving cycles or statistical method): … |
| 7.6.2.7.4. | L3e — L7e(10) | List of all OBD output codes and formats used (with explanation of each): … |
| 7.6.3. | OBD compatibility The following additional information shall be provided by the vehicle manufacturer to enable the manufacture of OBD-compatible replacement or service parts, diagnostic tools and test equipment: | |
| 7.6.3.1. | L3e — L7e(10) | A comprehensive document describing all sensed components concerned with the strategy for fault detection and MI activation (fixed number of driving cycles or statistical method). This shall, include a list of relevant secondary sensed parameters for each component monitored by the OBD system. The document shall also list all OBD output codes and formats (with an explanation of each) used in association with individual emission-related powertrain components and individual non-emission-related components, where monitoring the component is used to determine MI activation. This shall contain, in particular, a comprehensive explanation for the data given in service $05 Test ID $ 21 to FF and the data given in service $06: … |
| 7.6.3.2. | L3e — L7e(10) | For vehicle types using a communication link in accordance with ISO 15765-4 ‘Road vehicles, diagnostics on controller area network (CAN) — Part 4: requirements for emissions-related systems’, the manufacturer shall provide a comprehensive explanation for the data given in service $06 Test ID $00 to FF, for each OBD monitor ID supported: … |
| 7.6.3.3. | L3e — L7e(10) | The information required above may be provided in table form as described below. |
| Example OBD fault-code overview list Component Fault code Monitoring strategy Fault detection criteria MI activation criteria Secondary parameters Preconditioning Demonstration test Intake air temperature sensor open circuit P0xxxxzz Comparison with temperature model after cold start > 20 degr difference between measured and modelled intake air temperature 3rd cycle Coolant and intake air temperature sensor signals Two type I cycles Type I | Example OBD fault-code overview list Component Fault code Monitoring strategy Fault detection criteria MI activation criteria Secondary parameters Preconditioning Demonstration test Intake air temperature sensor open circuit P0xxxxzz Comparison with temperature model after cold start > 20 degr difference between measured and modelled intake air temperature 3rd cycle Coolant and intake air temperature sensor signals Two type I cycles Type I | Example OBD fault-code overview list Component Fault code Monitoring strategy Fault detection criteria MI activation criteria Secondary parameters Preconditioning Demonstration test Intake air temperature sensor open circuit P0xxxxzz Comparison with temperature model after cold start > 20 degr difference between measured and modelled intake air temperature 3rd cycle Coolant and intake air temperature sensor signals Two type I cycles Type I |
| 7.6.3.4. | L3e — L7e(10) | Description of ETC diagnostic fault codes: … |
| 7.6.3.5. | L3e — L7e(10) | Description of the default modes in case of an ETC failure which a driver may experience in case of an ETC failure |
| 7.6.4. | Communication protocol information The following information shall be referenced to a specific vehicle make, model and variant, or identified using other workable definitions such as VIN or vehicle and systems identification: | |
| 7.6.4.1. | L3e — L7e(10) | Any protocol information system needed to enable complete diagnostics in addition to the standards prescribed in point 3.8. of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 134/2014, such as additional hardware or software protocol information, parameter identification, transfer functions, ‘keep alive’ requirements, or error conditions; |
| 7.6.4.2. | L3e — L7e(10) | Details of how to obtain and interpret all fault codes not in accordance with the standards prescribed in point 3.1 of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 134/2014; |
| 7.6.4.3. | L3e — L7e(10) | A list of all available live data parameters including scaling and access information; |
| 7.6.4.4. | L3e — L7e(10) | A list of all available functional tests including device activation or control and the means to implement them; |
| 7.6.4.5. | L3e — L7e(10) | Details of how to obtain all component and status information, time stamps, pending DTC and freeze frames; |
| 7.6.4.6. | L3e — L7e(10) | PCU/ECU identification and variant coding; |
| 7.6.4.7. | L3e — L7e(10) | Details of how to reset service lights; |
| 7.6.4.8. | L3e — L7e(10) | Location of diagnostic connector and connector details; |
| 7.6.4.9. | L3e — L7e(10) | Engine code identification. |
| 7.6.5. | Test and diagnosis of OBD monitored components | |
| 7.6.5.1. | L3e — L7e(10) | A description of tests to confirm its functionality, at the component or in the harness: |
Appendix 4
Model information document relating to EU type-approval of a type of/a type of a vehicle with regard to(4) a sound level system
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| 0.11. | L1e — L7e | Type-approval marks for components and separate technical units(19): … |
| 0.11.1. | L1e — L7e | Method of attachment: … |
| 0.11.2. | L1e — L7e | Photographs and/or drawings of the location of the type-approval mark (completed example with dimensions): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.8. | Propulsion unit performance | |
| 1.8.1. | L3e, L4e, L5e, L7e-A, L7e-B2 | Declared maximum vehicle speed: … km/h |
| 1.8.2. | L1e, L2e, L6e, L7e-B1, L7e-C | Maximum design vehicle speed (22): … km/h and gear in which it is reached: … |
| 1.8.3. | L1e — L7e | Maximum net power combustion engine: … kW at … min-1 at A/F ratio: … |
| 1.8.4. | L1e — L7e | Maximum net torque combustion engine: … Nm at … min-1 at A/F ratio: … |
| 1.8.5. | L1e — L7e | Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1 |
| 1.8.6. | L1e — L7e | Maximum continuous-rated torque electric motor: … Nm at … min-1 |
| 1.8.7. | L1e — L7e | Maximum continuous total power for propulsion(s): … kW at … min-1 at A/F ratio: … |
| 1.8.8. | L1e — L7e | Maximum continuous total torque for propulsion(s): … Nm at … min-1 at A/F ratio: … |
| 1.8.9. | L1e — L7e | Maximum peak power for propulsion(s): … kW at … min-1at A/F ratio: … |
| 4. | GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION UNIT PERFORMANCE | |
| 4.0 | General information on environmental and propulsion performance | |
| ————— | ————— | ————— |
| 4.0.6. | Sound level | |
| 4.0.6.1. | L3e | Limit value for Lurban (16): … dB(A) |
| 4.4. | Additional information on environmental and propulsion unit performance | |
| 4.4.3. | L1e — L7e | Applicable information document set out in respectively UN Regulation No 9, 41 or 63 shall supplement this information document with regard to the sound level. |
Appendix 5
Model information document relating to EU type-approval of a type of/a type of a vehicle with regard to(4) a propulsion unit performance system
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): … | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| 0.11. | L1e — L7e | Type-approval marks for components and separate technical units(19): … |
| 0.11.1. | L1e — L7e | Method of attachment: … |
| 0.11.2. | L1e — L7e | Photographs and/or drawings of the location of the type-approval mark (completed example with dimensions): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.8. | Propulsion unit performance | |
| 1.8.1. | L3e, L4e, L5e, L7e-A, L7e-B2 | Declared maximum vehicle speed: km/h |
| 1.8.2. | L1e, L2e, L6e, L7e-B1, L7e-C | Maximum design vehicle speed (22): … km/h and gear in which it is reached: … |
| 1.8.3. | L1e — L7e | Maximum net power combustion engine: … kW at … min-1 at A/F ratio: … |
| 1.8.4. | L1e — L7e | Maximum net torque combustion engine: … Nm at … min–1 at A/F ratio: … |
| 1.8.5. | L1e — L7e | Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1 |
| 1.8.6. | L1e — L7e | Maximum continuous-rated torque electric motor: … Nm at … min–1 |
| 1.8.7. | L1e — L7e | Maximum continuous total power for propulsion(s): … kW at … min–1 at A/F ratio: … |
| 1.8.8. | L1e — L7e | Maximum continuous total torque for propulsion(s): … Nm at … min–1 at A/F ratio: … |
| 1.8.9. | L1e — L7e | Maximum peak power for propulsion(s): … kW at …min–1 at A/F ratio: … |
| 3. | GENERAL POWERTRAIN CHARACTERISTICS | |
| 3.3. | Pure electric and hybrid electric propulsion and control | |
| 3.3.3.4. | L1e — L7e | 15/30(4) minutes power(27): … kW |
| 3.9. | Cycles designed to pedal | |
| 3.9.1. | L1e | Ratio manpower/electric power: … |
| 3.9.2. | L1e | Maximum assistance factor: … |
| 3.9.3. | L1e | Maximum vehicle speed for which the electric motor gives assistance: … km/h |
| 3.9.4. | L1e | Switch-off distance: … m |
Appendix 5a
Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a maximum torque and a maximum net power of a propulsion unit system
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | Company name and address of manufacturer: … | |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer's authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the separate technical unit is intended for(21): | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.8. | Propulsion unit performance | |
| 1.8.1. | L3e, L4e, L5e, L7e-A, L7e-B2 | Declared maximum vehicle speed: … km/h |
| 1.8.2. | L1e, L2e, L6e, L7e-B1, L7e-C | Maximum design vehicle speed(22): … km/h and gear in which it is reached: … |
| 1.8.3. | L1e — L7e | Maximum net power combustion engine: … kW at … min-1 at A/F ratio: … |
| 1.8.4. | L1e — L7e | Maximum net torque combustion engine: … Nm at … min-1 at A/F ratio: … |
| 1.8.5. | L1e — L7e | Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1 |
| 1.8.6. | L1e — L7e | Maximum continuous-rated torque electric motor: … Nm at … min-1 |
| 1.8.7. | L1e — L7e | Maximum continuous total power for propulsion(s): … kW at … min-1 at A/F ratio: … |
| 1.8.8. | L1e — L7e | Maximum continuous total torque for propulsion(s): … Nm at … min-1 at A/F ratio: … |
| 1.8.9. | L1e — L7e | Maximum peak power for propulsion(s): … kW at … min-1 at A/F ratio: … |
| 3. | GENERAL POWERTRAIN CHARACTERISTICS | |
| 3.2. | Combustion engine | |
| 3.2.1. | Specific engine information | |
| 3.2.1.1. | L1e — L7e | Number of combustion engines: … |
| 3.2.1.2. | L1e — L7e | Working principle: internal combustion engine (ICE)/positive ignition/compression ignition/external combustion engine (ECE)/turbine/compressed air(4): … |
| 3.2.1.3. | L1e — L7e | Cycle: four-stroke/two-stroke/rotary/other(4): |
| 3.2.1.4. | L1e — L7e | Cylinders |
| 3.2.1.4.1. | L1e — L7e | Number: … |
| 3.2.1.4.2. | L1e — L7e | Arrangement(26): … |
| 3.2.1.4.3. | L1e — L7e | Bore(12): … mm |
| 3.2.1.4.4. | L1e — L7e | Stroke(12): … mm |
| 3.2.1.4.5. | L1e — L7e | Number and configuration of stators in the case of rotary-piston engine: … |
| 3.2.1.4.6. | L1e — L7e | Volume of combustion chambers in the case of rotary-piston engine: … cm3 |
| 3.2.1.4.7. | L1e — L7e | Firing order: … |
| 3.2.1.5. | L1e — L7e | Engine capacity(6): … cm3 |
| 3.2.1.6. | L1e — L7e | Volumetric compression ratio(7): … |
| 3.3. | Pure electric and hybrid electric propulsion and control | |
| 3.3.3.4. | L1e — L7e | 15/30(4) minutes power(27): … kW |
Appendix 6
Model information document relating to EU type-approval of a pollution-control device as a STU
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): … | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.8. | Propulsion unit performance | |
| 1.8.1. | L3e, L4e, L5e, L7e-A, L7e-B2 | Declared maximum vehicle speed: km/h |
| 1.8.2. | L1e, L2e, L6e, L7e-B1, L7e-C | Maximum design vehicle speed (22): … km/h and gear in which it is reached: … |
| 1.8.3. | L1e — L7e | Maximum net power combustion engine: … kW at … min-1 at A/F ratio: … |
| 1.8.4. | L1e — L7e | Maximum net torque combustion engine: … Nm at … min-1 at A/F ratio: … |
| 1.8.5. | L1e — L7e | Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1 |
| 1.8.6. | L1e — L7e | Maximum continuous-rated torque electric motor: … Nm at … min-1 |
| 1.8.7. | L1e — L7e | Maximum continuous total power for propulsion(s): … kW at … min-1 at A/F ratio: … |
| 1.8.8. | L1e — L7e | Maximum continuous total torque for propulsion(s): … Nm at … min-1 at A/F ratio: … |
| 1.8.9. | L1e — L7e | Maximum peak power for propulsion(s): … kW at … min-1 at A/F ratio: … |
| 4. | GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION UNIT PERFORMANCE | |
| 4.0 | General information on environmental and propulsion performance | |
| 4.0.1. | L1e — L7e | Environmental step: Euro (3/4/5/5+) (4) |
| 4.0.2. | L1e — L7e | Fuel consumption (provide details for each reference fuel tested) … l/kg(4)/100 km |
| 4.0.3. | L1e — L7e | CO2 emissions(25): … g/km |
| 4.0.4. | L1e — L7e | Energy consumption(25): … Wh/km |
| 4.0.5. | L1e — L7e | Electric range(25): … km |
| 4.1. | Tailpipe emission-control system | |
| 4.1.1. | L1e — L7e | Brief description and schematic drawing of the tailpipe emission-control system and its control: … |
| 4.1.2. | Catalytic converter | |
| 4.1.2.1. | L1e — L7e | Configuration, number of catalytic converters and elements (information to be provided for each separate unit): … |
| 4.1.2.2. | L1e — L7e | Drawing with dimensions, shape and volume of the catalytic converter(s): … |
| 4.1.2.3. | L1e — L7e | Catalytic reaction: … |
| * 4.1.2.4. | L1e — L7e | Total charge of precious metals: … |
| * 4.1.2.5. | L1e — L7e | Relative concentration: … |
| * 4.1.2.6. | L1e — L7e | Substrate (structure and material): … |
| * 4.1.2.7. | L1e — L7e | Cell density: … |
| * 4.1.2.8. | L1e — L7e | Casing for the catalytic converter(s): … |
| 4.1.2.9. | L1e — L7e | Location of the catalytic converter(s) (place and reference distance in the exhaust line): … |
| 4.1.2.10. | L1e — L7e | Catalyst heat-shield: yes/no(4) |
| 4.1.2.11. | L1e — L7e | Brief description and schematic drawing of the regeneration system/method of exhaust after-treatment systems and its control system: … |
| 4.1.2.11.1. | L1e — L7e | Normal operating temperature range: … K |
| 4.1.2.11.2. | L1e — L7e | Consumable reagents: yes/no(4) |
| 4.1.2.11.3. | L1e — L7e | Brief description and schematic drawing of the reagent flow (wet) system and its control system: … |
| 4.1.2.11.4. | L1e — L7e | Type and concentration of reagent needed for catalytic action: … |
| 4.1.2.11.5. | L1e — L7e | Normal operational temperature range of reagent: … K |
| 4.1.2.11.6. | L1e — L7e | Frequency of reagent refill: continuous/maintenance(4) |
| 4.1.2.12. | L1e — L7e | Identifying part number: |
| 4.1.3. | Oxygen sensor(s) | |
| 4.1.3.1. | L1e — L7e | Oxygen sensor component(s) drawing(s): … |
| 4.1.3.2. | L1e — L7e | Drawing of exhaust device with oxygen sensor location(s) (dimensions relative to exhaust valves): … |
| 4.1.3.3. | L1e — L7e | Control range(s): … |
| 4.1.3.4. | L1e — L7e | Identifying part number(s): … |
| 4.1.3.5. | L1e — L7e | Description of oxygen sensor heating system and heating strategy: … |
| 4.1.3.6. | L1e — L7e | Oxygen sensor heat shield(s): yes/no(4) |
| 4.1.4. | Secondary air-injection (air-inject in exhaust) | |
| 4.1.4.1. | L1e — L7e | Brief description and schematic drawing of the secondary air-injection system and its control system: … |
| 4.1.4.2. | L1e — L7e | Configuration (mechanical, pulse air, air pump etc.)(4): … |
| 4.1.4.3. | L1e — L7e | Working principle: … |
| 4.1.5. | External exhaust gas recirculation (EGR) | |
| 4.1.5.1. | L1e — L7e | Brief description and schematic drawing of the EGR system (exhaust flow) and its control system: … |
| 4.1.5.2. | L1e — L7e | Characteristics: … |
| 4.1.6. | Particulate filter | |
| 4.1.6.1. | L1e — L7e | PT component drawing with dimensions, shape and capacity of the particulate filter: … |
| 4.1.6.2. | L1e — L7e | Design of the particulate filter: … |
| 4.1.6.3. | L1e — L7e | Brief description and schematic drawing of the particulate filter and its control system: … |
| 4.1.6.4. | L1e — L7e | Location (reference distance in the exhaust line): … |
| 4.1.6.5. | L1e — L7e | Method or system of regeneration, description and drawing: … |
| 4.1.7. | Lean NOx trap | |
| 4.1.7.1. | L1e — L7e | Operation principle of lean NOx trap: … |
| 4.1.8. | Additional tailpipe emission-control devices (if any not covered under another heading) | |
| 4.1.8.1. | L1e — L7e | Working principle: … |
Appendix 7
Model information document relating to EU type-approval of a noise-abatement device as a STU
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.8. | Propulsion unit performance | |
| 1.8.1. | L3e, L4e, L5e, L7e-A, L7e-B2 | Declared maximum vehicle speed: … km/h |
| 1.8.2. | L1e, L2e, L6e, L7e-B1, L7e-C | Maximum design vehicle speed (22): … km/h and gear in which it is reached: … |
| 1.8.3. | L1e — L7e | Maximum net power combustion engine: … kW at … min-1 at A/F ratio: … |
| 1.8.4. | L1e — L7e | Maximum net torque combustion engine: … Nm at … min-1 at A/F ratio: … |
| 1.8.5. | L1e — L7e | Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1 |
| 1.8.6. | L1e — L7e | Maximum continuous-rated torque electric motor: … Nm at … min-1 |
| 1.8.7. | L1e — L7e | Maximum continuous total power for propulsion(s): … kW at … min-1 at A/F ratio: … |
| 1.8.8. | L1e — L7e | Maximum continuous total torque for propulsion(s): … Nm at … min-1 at A/F ratio: … |
| 1.8.9. | L1e — L7e | Maximum peak power for propulsion(s): … kW at … min-1 at A/F ratio: … |
| 4. | GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION UNIT PERFORMANCE | |
| 4.0 | General information on environmental and propulsion performance | |
| 4.0.1. | L1e — L7e | Environmental step: Euro (3/4/5/5+) (4) |
| 4.0.2. | L1e — L7e | Fuel consumption (provide details for each reference fuel tested) … l/kg(4)/100 km |
| ————— | ————— | ————— |
| 4.0.3. | L1e — L7e | CO2 emissions(25): … g/km |
| 4.0.4. | L1e — L7e | Energy consumption(25): … Wh/km |
| 4.0.5. | L1e — L7e | Electric range(25): … km |
| 4.0.6. | Sound level | |
| 4.0.6.1. | L3e | Limit value for Lurban (16): … dB(A) |
| 4.4. | Additional information on environmental and propulsion unit performance | |
| 4.4.4. | L1e — L7e | Applicable information document set out in respectively UN Regulation No 92 shall supplement this information document with regards to the noise-abatement devices installed on the vehicle. |
Appendix 8
Model information document relating to EU type-approval of an exhaust (pollution-control device and noise-abatement device) as a STU
| (Sub) categories | Detailed information | |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): … | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems. |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.8. | Propulsion unit performance | |
| 1.8.1. | L3e, L4e, L5e, L7e-A, L7e-B2 | Declared maximum vehicle speed: … km/h |
| 1.8.2. | L1e, L2e, L6e, L7e-B1, L7e-C | Maximum design vehicle speed (22): … km/h and gear in which it is reached: … |
| 1.8.3. | L1e — L7e | Maximum net power combustion engine: … kW at … min–1 at A/F ratio: … |
| 1.8.4. | L1e — L7e | Maximum net torque combustion engine: … Nm at … min–1 at A/F ratio: … |
| 1.8.5. | L1e — L7e | Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1 |
| 1.8.6. | L1e — L7e | Maximum continuous-rated torque electric motor: … Nm at … min–1 |
| 1.8.7. | L1e — L7e | Maximum continuous total power for propulsion(s): … kW at … min–1 at A/F ratio: … |
| 1.8.8. | L1e — L7e | Maximum continuous total torque for propulsion(s): … Nm at … min–1 at A/F ratio: … |
| 1.8.9. | L1e — L7e | Maximum peak power for propulsion(s): … kW at … min–1 at A/F ratio: … |
| 4. | GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION UNIT PERFORMANCE | |
| 4.0 | General information on environmental and propulsion performance | |
| 4.0.1. | L1e — L7e | Environmental step: Euro (3/4/5/5+) (4) |
| 4.0.2. | L1e — L7e | Fuel consumption (provide details for each reference fuel tested) … l/kg(4)/100 km |
| ————— | ————— | ————— |
| 4.0.3. | L1e — L7e | CO2 emissions(25): … g/km |
| 4.0.4. | L1e — L7e | Energy consumption(25): … Wh/km |
| 4.0.5. | L1e — L7e | Electric range(25): … km |
| 4.0.6. | Sound level | |
| 4.0.6.1. | L3e | Limit value for Lurban (16): … dB(A) |
| 4.1. | Tailpipe emission-control system | |
| 4.1.1. | L1e — L7e | Brief description and schematic drawing of the tailpipe emission-control system and its control: … |
| 4.1.2. | Catalytic converter | |
| 4.1.2.1. | L1e — L7e | Configuration, number of catalytic converters and elements (information to be provided for each separate unit): … |
| 4.1.2.2. | L1e — L7e | Drawing with dimensions, shape and volume of the catalytic converter(s): … |
| 4.1.2.3. | L1e — L7e | Catalytic reaction: … |
| * 4.1.2.4. | L1e — L7e | Total charge of precious metals: … |
| * 4.1.2.5. | L1e — L7e | Relative concentration: … |
| * 4.1.2.6. | L1e — L7e | Substrate (structure and material): … |
| * 4.1.2.7. | L1e — L7e | Cell density: … |
| * 4.1.2.8. | L1e — L7e | Casing for the catalytic converter(s): … |
| 4.1.2.9. | L1e — L7e | Location of the catalytic converter(s) (place and reference distance in the exhaust line): … |
| 4.1.2.10. | L1e — L7e | Catalyst heat-shield: yes/no(4) |
| 4.1.2.11. | L1e — L7e | Brief description and schematic drawing of the regeneration system/method of exhaust after-treatment systems and its control system: … |
| 4.1.2.11.1. | L1e — L7e | Normal operating temperature range: … K |
| 4.1.2.11.2. | L1e — L7e | Consumable reagents: yes/no(4) |
| 4.1.2.11.3. | L1e — L7e | Brief description and schematic drawing of the reagent flow (wet) system and its control system: … |
| 4.1.2.11.4. | L1e — L7e | Type and concentration of reagent needed for catalytic action: |
| 4.1.2.11.5. | L1e — L7e | Normal operational temperature range of reagent: … K |
| 4.1.2.11.6. | L1e — L7e | Frequency of reagent refill: continuous/maintenance(4) |
| 4.1.2.12. | L1e — L7e | Identifying part number: … |
| 4.1.3. | Oxygen sensor(s) | |
| 4.1.3.1. | L1e — L7e | Oxygen sensor component(s) drawing(s): … |
| 4.1.3.2. | L1e — L7e | Drawing of exhaust device with oxygen sensor location(s) (dimensions relative to exhaust valves): … |
| 4.1.3.3. | L1e — L7e | Control range(s): … |
| 4.1.3.4. | L1e — L7e | Identifying part number(s): … |
| 4.1.3.5. | L1e — L7e | Description of oxygen sensor heating system and heating strategy: … |
| 4.1.3.6. | L1e — L7e | Oxygen sensor heat shield(s): yes/no(4) |
| 4.1.4. | Secondary air-injection (air-inject in exhaust) | |
| 4.1.4.1. | L1e — L7e | Brief description and schematic drawing of the secondary air-injection system and its control system: … |
| 4.1.4.2. | L1e — L7e | Configuration (mechanical, pulse air, air pump etc.)(4): … |
| 4.1.4.3. | L1e — L7e | Working principle: … |
| 4.1.5. | External exhaust gas recirculation (EGR) | |
| 4.1.5.1. | L1e — L7e | Brief description and schematic drawing of the EGR system (exhaust flow) and its control system: … |
| 4.1.5.2. | L1e — L7e | Characteristics: … |
| 4.1.5.3. | L1e — L7e | Water-cooled EGR system: yes/no (4) |
| 4.1.5.4. | L1e — L7e | Air-cooled EGR system: yes/no (4) |
| 4.1.6. | Particulate filter | |
| 4.1.6.1. | L1e — L7e | PT component drawing with dimensions, shape and capacity of the particulate filter: … |
| 4.1.6.2. | L1e — L7e | Design of the particulate filter: … |
| 4.1.6.3. | L1e — L7e | Brief description and schematic drawing of the particulate filter and its control system: … |
| 4.1.6.4. | L1e — L7e | Location (reference distance in the exhaust line): … |
| 4.1.6.5. | L1e — L7e | Method or system of regeneration, description and drawing: … |
| 4.1.7. | Lean NOx trap | |
| 4.1.7.1. | L1e — L7e | Operation principle of lean NOx trap: … |
| 4.1.8. | Additional tailpipe emission-control devices (if any not covered under another heading) | |
| 4.1.8.1. | L1e — L7e | Working principle: |
| 4.4. | Additional information on environmental and propulsion unit performance | |
| 4.4.4. | L1e — L7e | Applicable information document set out in respectively UN Regulation No 92 shall supplement this information document with regards to the noise-abatement devices installed on the vehicle. |
Appendix 8a
Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning devices system
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | Company name and address of manufacturer: … | |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer's authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the separate technical unit is intended for(21): … | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems |
| 6. | INFORMATION ON FUNCTIONAL SAFETY | |
| 6.1. | Audible warning devices | |
| 6.1.1. | L1e — L7e | Summary description of device(s) used and their purpose: … |
| 6.1.2. | L1e — L7e | Drawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: … |
| 6.1.3. | L1e — L7e | Details of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: … |
| 6.1.4. | L1e — L7e | Electrical/pneumatic circuit diagram: … |
| 6.1.4.1. | L1e — L7e | Voltage: AC/DC(4) |
| 6.1.4.2. | L1e — L7e | Rated voltage or pressure: … |
| 6.1.5. | L1e — L7e | Drawing of the mounting device: … |
Appendix 9
Model information document relating to EU type-approval of a type of a type of a vehicle with regard to(4) a braking system
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | L1e — L7e | Company name and address of manufacturer: … |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer’s authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the system/separate technical unit is intended for(21): | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| 0.11. | L1e — L7e | Type-approval marks for components and separate technical units(19): … |
| 0.11.1. | L1e — L7e | Method of attachment: … |
| 0.11.2. | L1e — L7e | Photographs and/or drawings of the location of the type-approval mark (completed example with dimensions): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.8. | Propulsion unit performance | |
| 1.8.1. | L3e, L4e, L5e, L7e-A, L7e-B2 | Declared maximum vehicle speed: … km/h |
| 1.8.2. | L1e, L2e, L6e, L7e-B1, L7e-C | Maximum design vehicle speed (22): … km/h and gear in which it is reached: … |
| 1.8.3. | L1e — L7e | Maximum net power combustion engine: … kW at … min-1 at A/F ratio: … |
| 1.8.4. | L1e — L7e | Maximum net torque combustion engine: … Nm at … min-1 at A/F ratio: … |
| 1.8.5. | L1e — L7e | Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1 |
| 1.8.6. | L1e — L7e | Maximum continuous-rated torque electric motor: … Nm at … min-1 |
| 1.8.7. | L1e — L7e | Maximum continuous total power for propulsion(s): … kW at … min-1 at A/F ratio: … |
| 1.8.8. | L1e — L7e | Maximum continuous total torque for propulsion(s): … Nm at … min-1 at A/F ratio: … |
| 1.8.9. | L1e — L7e | Maximum peak power for propulsion(s): … kW at … min-1 at A/F ratio: … |
| 2. | MASSES AND DIMENSIONS | |
| (in kg and mm.) Refer to drawings where applicable | ||
| 2.1 | Range of vehicle mass (overall) | |
| 2.1.1. | L1e — L7e | Mass in running order: … kg |
| 2.1.1.1. | L1e — L7e | Distribution of mass in running order between the axles: … kg |
| 2.1.3. | L1e — L7e | Technically permissible maximum laden mass: … kg |
| 2.1.3.1. | L1e — L7e | Technically permissible maximum mass on front axle: … kg |
| 2.1.3.2. | L1e — L7e | Technically permissible maximum mass on rear axle: … kg |
| 2.1.3.3. | L4e | Technically permissible maximum mass on sidecar axle: … kg |
| 6. | INFORMATION ON FUNCTIONAL SAFETY | |
| 6.2. | Braking, including anti-lock and combined braking systems | |
| 6.2.1. | L1e — L7e | Characteristics of the brakes, including details and drawings of the drums, discs, hoses, make and type of shoe/pad assemblies and/or linings, effective braking areas, radius of drums, shoes or discs, mass of drums, adjustment devices, relevant parts of the axle(s) and suspension, levers, pedals (4): … |
| 6.2.2. | L1e — L7e | Operating diagram, description and/or drawing of the braking system, including details and drawings of the transmission and controls as well as a brief description of the electrical and/or electronic components used in the braking system(4): |
| 6.2.2.1. | L1e — L7e | Front, rear and sidecar brakes, disc and/or drum(4): |
| 6.2.2.2. | L1e — L7e | Parking braking system: … |
| 6.2.2.3. | L1e — L7e | Any additional braking system: … |
| 6.2.3. | L1e — L7e | Vehicle is equipped to tow a trailer with no brake/overrun brake/electric/pneumatic/hydraulic service brakes: yes/no(4): … |
| 6.2.4. | L1e — L7e | Anti-lock/Combined braking system |
| 6.2.4.1. | L1e — L7e | Anti-lock braking system: yes/no/optional(4) |
| 6.2.4.2. | L1e — L7e | Combined braking system: yes/no/optional(4) |
| 6.2.4.3. | L1e — L7e | Anti-lock and combined braking system: yes/no/optional(4) |
| 6.2.4.4. | L1e — L7e | Schematic drawing(s): … |
| 6.2.5. | L1e — L7e | Hydraulic reservoir(s): … |
| 6.2.6. | L1e — L7e | Particular characteristics of the braking system(s): … |
| 6.2.6.1. | L1e — L7e | Brake shoes and/or pads(4): … |
| 6.2.6.2. | L1e — L7e | Linings and/or pads (indicate make, type, grade of material or identification mark): … |
| 6.2.6.3. | L1e — L7e | Brake levers and/or pedals(4): … |
| 6.2.6.4. | L1e — L7e | Other devices (where applicable): drawing and description: … |
Appendix 9a
Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of glazing, windscreen wipers and defrosting and demisting devices system
| Item No. | (Sub) categories | Detailed information |
|---|---|---|
| B. | General information concerning systems, components or separate technical units | |
| 0.7. | L1e — L7e | Make(s) (trade name(s) of manufacturer): … |
| 0.8. | L1e — L7e | Type: … |
| 0.8.1. | L1e — L7e | Commercial name(s) (if available): … |
| 0.8.2. | L1e — L7e | Type-approval number(s) (if available): … |
| 0.8.3. | L1e — L7e | Type-approval(s) issued on (date, if available): … |
| 0.9. | Company name and address of manufacturer: … | |
| 0.9.1. | L1e — L7e | Name(s) and address(es) of assembly plants: … |
| 0.9.2. | L1e — L7e | Name and address of manufacturer's authorised representative, if any: … |
| 0.10. | Vehicle(s) for which the separate technical unit is intended for(21): | |
| 0.10.1. | L1e — L7e | Type(17): … |
| 0.10.2. | L1e — L7e | Variant(17): … |
| 0.10.3. | L1e — L7e | Version(17): … |
| 0.10.4. | L1e — L7e | Commercial name(s) (if available): … |
| 0.10.5. | L1e — L7e | Category, subcategory and sub-subcategory of vehicle(2): … |
| C. | General information concerning vehicle, systems, components or separate technical units | |
| 0.12. | Conformity of production | |
| 0.12.1. | L1e — L7e | Description of overall quality-assurance management systems |
| 1. | GENERAL CONSTRUCTION CHARACTERISTICS | |
| 1.7. | L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C | Hand of drive: left/right/centre(4): … |
| 1.7.1. | L1e — L7e | Vehicle is equipped to be driven in right/left-hand traffic and in countries that use metric/metric and imperial units(4): … |
| 3. | GENERAL POWERTRAIN CHARACTERISTICS | |
| 3.1 | Manufacturer of the propulsion unit | |
| 3.1.1. | Combustion engine | |
| 3.1.1.1. | L1e — L7e | Manufacturer: … |
| 3.1.1.2. | L1e — L7e | Engine code (as marked on the engine or other means of identification): … |
| 3.1.2. | Electric motor | |
| 3.1.2.1. | L1e — L7e | Manufacturer: … |
| 3.1.2.2. | L1e — L7e | Electric motor code (as marked on the engine or other means of identification): … |
| 3.1.3. | Hybrid application | |
| 3.1.3.1. | L1e — L7e | Manufacturer: … |
| 3.1.3.2. | L1e — L7e | Application code (as marked on the engine or other means of identification): … |
| 3.2. | Combustion engine | |
| 3.2.1. | Specific engine information | |
| 3.2.1.2. | L1e — L7e | Working principle: internal combustion engine (ICE)/positive ignition/compression ignition/external combustion engine (ECE)/turbine/compressed air(4): … |
| 3.2.1.3. | L1e — L7e | Cycle: four-stroke/two-stroke/rotary/other(4): … |
| 3.2.1.4. | L1e — L7e | Cylinders |
| 3.2.1.4.1. | L1e — L7e | Number: … |
| 3.2.1.4.2. | L1e — L7e | Arrangement(26): … |
| 3.2.1.5. | L1e — L7e | Engine capacity(6): … cm3 |
| 3.2.1.9. | L1e — L7e | Normal warm engine idling speed: … min-1 |
| 3.2.3. | Fuel | |
| 3.2.3.1. | L1e — L7e | Fuel type: (9) |
| 3.2.3.2. | L1e — L7e | Vehicle fuel configuration: mono-fuel/bi- fuel/flex fuel(4) |
| 3.2.10. | Powertrain cooling system and control | |
| 3.2.10.2. | L1e — L7e | Cooling system: liquid: yes/no(4) |
| 3.2.10.2.2. | L1e — L7e | Nominal setting of the engine temperature control mechanism: … |
| 3.2.10.2.3. | L1e — L7e | Nature of liquid: … |
| 3.2.10.2.4. | L1e — L7e | Circulating pump(s): yes/no(4) |
| 3.2.10.2.4.1. | L1e — L7e | Characteristics: … |
| 3.2.10.2.5. | L1e — L7e | Drive ratio(s): … |
| 3.2.10.2.6. | L1e — L7e | Description of the fan and its drive mechanism: … |
| 3.2.10.3. | L1e — L7e | Air cooling: yes/no(4) |
| 3.2.10.3.3. | L1e — L7e) | Fan: yes/no(4) |
| 3.2.10.3.3.1. | L1e — L7e | Characteristics: … |
| 3.2.13. | Other electrical systems and control than those intended for the electrical propulsion | |
| 3.2.13.1. | L1e — L7e | Rated voltage: … V, positive/negative ground(4) |
| 3.2.13.2. | L1e — L7e | Generator: yes/no(4): |
| 3.2.13.2.1. | L1e — L7e | Nominal output: … VA |
| 3.3. | Pure electric and hybrid electric propulsion and control | |
| 3.3.3. | Electric propulsion motor | |
| 3.3.3.2. | L1e — L7e | Type (winding, excitation): … |
| 3.3.3.3. | L1e — L7e | Operating voltage: … V |
| 3.3.4. | Propulsion batteries | |
| 3.3.4.1. | L1e — L7e | Primary propulsion battery |
| 3.3.4.1.1. | L1e — L7e | Number of cells: … |
| 3.3.4.1.2. | L1e — L7e | Mass: …kg |
| 3.3.4.1.3. | L1e — L7e | Capacity: … Ah (Amp-hours) / … V |
| 3.3.4.1.5. | L1e — L7e | Position in the vehicle: … |
| 3.3.4.2. | L1e — L7e | Secondary propulsion battery |
| 3.3.4.2.1. | L1e — L7e | Number of cells: … |
| 3.3.4.2.2. | L1e — L7e | Mass: … kg |
| 3.3.4.2.3. | L1e — L7e | Capacity: … Ah (Amp-hours) / … V |
| 3.3.4.2.5. | L1e — L7e | Position in the vehicle: … |
| 3.3.5. | Hybrid electric vehicle | |
| 3.3.5.1. | L1e — L7e | Engine or motor combination (number of electric motor(s) and/or combustion engine(s)/other)(4): … |
| 3.3.5.2. | L1e — L7e | Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging: |
| 3.3.5.3. | L1e — L7e | Operating mode switch: with/without(4) |
| 3.3.5.4. | L1e — L7e | Selectable modes: yes/no(4) |
| 3.3.5.5. | L1e — L7e | Pure fuel consuming: yes/no(4) |
| 3.3.5.6. | L1e — L7e | Vehicle propelled with fuel cell: yes/no(4) |
| 3.3.5.7. | L1e — L7e | Hybrid operation modes: yes/no(4) (if yes, short description): … |
| 3.3.6. | Energy storage device | |
| 3.3.6.1. | L1e — L7e | Description: (battery, capacitor, flywheel/generator)(4) |
| 3.3.6.2. | L1e — L7e | Identification number: … |
| * 3.3.6.3. | L1e — L7e | Kind of electrochemical couple: … |
| 3.3.6.4. | L1e — L7e | Energy (for battery: voltage and capacity Ah in 2h, for capacitor: J,…, for flywheel/generator: J,…,): … |
| 3.3.6.5. | L1e — L7e | Charger: on-board/external/without(4) |
| 3.4. | Other engines, electric motors or combinations (specific information concerning the parts of these motors) | |
| 3.4.1. | Cooling system (temperatures permitted by the manufacturer) | |
| 3.4.1.1. | L1e — L7e | Liquid cooling: … |
| 3.4.1.1.1. | L1e — L7e | Maximum temperature at outlet: … K |
| 3.4.1.2. | L1e — L7e | Air cooling: … |
| 3.4.1.2.1. | L1e — L7e | Reference point: … |
| 3.4.1.2.2. | L1e — L7e | Maximum temperature at reference point: … K |
| 6. | INFORMATION ON FUNCTIONAL SAFETY | |
| 6.5. | Glazing, windscreen wipers and washers, and defrosting and demisting systems | |
| 6.5.1. | Windscreen | |
| 6.5.1.1. | L2e, L5e, L6e, L7e | Materials used: … |
| 6.5.1.2. | L2e, L5e, L6e, L7e | Method of mounting: … |
| 6.5.1.3. | L2e, L5e, L6e, L7e | Angle of inclination: … |
| 6.5.1.4. | L2e, L5e, L6e, L7e | Windscreen accessories and the position in which they are fitted, together with a brief description of any electrical/electronic components: … |
| 6.5.1.5. | L2e, L5e, L6e, L7e | Drawing of the windscreen with dimensions: … |
| 6.5.2. | Other windows | |
| 6.5.2.1. | L2e, L5e, L6e, L7e | Materials used: … |
| 6.5.2.2 | L2e, L5e, L6e, L7e | A brief description of the electrical/electronic components (if any) of the window lifting mechanism: … |
| 6.5.3. | Opening roof glazing | |
| 6.5.3.1. | L2e, L5e, L6e, L7e | Materials used: … |
| 6.5.4. | Other glass panes | |
| 6.5.4.1. | L2e, L5e, L6e, L7e | Materials used: … |
| 6.6. | Windscreen wiper(s) | |
| 6.6.1. | L2e, L5e, L6e, L7e | Detailed technical description (including photographs or drawings): … |
| 6.7. | Windscreen washer | |
| 6.7.1. | L2e, L5e, L6e, L7e | Detailed technical description (including photographs or drawings): … |
| 6.7.2. | L2e, L5e, L6e, L7e | Capacity of the reservoir: …l |
| 6.8. | Defrosting and demisting | |
| 6.8.1. | L2e, L5e, L6e, L7e | Detailed technical description (including photographs or drawings): … |
| 6.16. | Seating positions (saddles and seats) | |
| 6.16.1. | L1e — L7e | Number of seating positions: … |
| 6.16.1.1. | L2e, L5e, L6e, L7e | Location and arrangement(8): … |
| 6.16.4. | L2e, L4e, L5e-B, L6e-B, L7e | Coordinates or drawing of the R-point(s) of all seating positions: … |
| 6.16.4.1. | L2e, L4e, L5e-B, L6e-B, L7e | Driver's seat: … |
| 6.16.5. | L1e — L7e | Design torso angle: … |
| 6.16.5.1. | L1e — L7e | Driver's seat: … |
| 6.20. | Vehicle occupant protection, including interior fittings and vehicle doors | |
| 6.20.1. | Bodywork | |
| 6.20.1.1. | L2e, L5e-B, L6e-B, L7e | Materials used and methods of construction: … |
| 6.20.2. | Occupant doors, latches and hinges | |
| 6.20.2.1. | L2e, L5e, L6e, L7e | Number of doors, and its configuration, dimensions and maximum angle of opening(5): … |
| 6.20.3. | Interior protection for occupants) | |
| 6.20.3.1. | L2e, L5e, L6e, L7e | Photographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: … |
Appendix 9b
Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an identification of controls, te ll-tales and indicators system
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.