LegalizeCommission Implementing Regulation (EU) 2022/1434 of 22 July 2022 granting a Union authorisation for the biocidal product family ‘CMIT-MIT Aqueous 1.5-15’ (Text with EEA relevance)
| Hazard statements | H332: Harmful if inhaled. H314: Causes severe skin burns and eye damage. H317: May cause an allergic skin reaction. H410: Very toxic to aquatic life with long lasting effects. H290: May be corrosive to metals. H302: Harmful if swallowed. EUH071: Corrosive to the respiratory tract. |
|---|---|
| Precautionary statements | P260: Do not breathe fume. P264: Wash skin thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P272: Contaminated work clothing should not be allowed out of the workplace. P273: Avoid release to the environment. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection . P362+P364: Take off contaminated clothing and wash it before reuse. P333+P313: If skin irritation or rash occurs: Get medical advice. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310: Immediately call a POISON CENTER/ doctor . P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P391: Collect spillage. P405: Store locked up. P234: Keep only in original packaging. P301+P312: IF SWALLOWED: Call a POISON CENTER/ doctor if you feel unwell. P406: Store in a corrosion-resistant container with a resistant inner liner. P390: Absorb spillage to prevent material damage. |
4. AUTHORISED USE(S) OF THE META SPC
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria (including Legionella pneumophila) Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data Scientific name: no data Common name: algae Development stage: no data |
| Field(s) of use | outdoor use Preservation of sump water in air conditioning and air washer systems. Air conditioning systems and in air washer systems to preserve the sump water. Air washer systems are used extensively in textile factories and in the tobacco industry to scrub or clean the air and for fine control of temperature and humidity. |
| Application method(s) | Method: Open and closed Systems Detailed description: Automatic and Manual Dosing The biocidal product is typically added in a central chilled water sump which supplies several air washers. The loading process may be conducted either manually or by automation. In the automated process, the biocide is metered directly into the sump from a holding tank or other type of bulk container by a dosimeter (pump). The feeding pipe must dose the biocidal product below the water level in order to limit its evaporation. |
| Application rate(s) and frequency | Application Rate: Curative application: Bacteria, yeasts and fungi. When the system is noticeably fouled, apply 5 to 14,9 mg C(M)IT/MIT (3:1) per Litre of water to be treated, as post treatment after a shock dose of minimum 0,3 ppm of free chlorine. Preventive application: algae When control is obtained, add a continuous or semi continuous feed of 3 to 5 mg C(M)IT/MIT (3:1) per L of water to be treated - Number and timing of application: Curative application: Bacteria, yeasts and fungi When the system is noticeably fouled, apply 5 to 14,9 mg C(M)IT/MIT (3:1) per Litre of water to be treated, as post treatment after a shock dose of minimum 0,3 ppm of free chlorine. Contact time of 1 hour. Preventive application: algae When control is obtained, add a continuous or semi continuous feed of 3 to 5 mg C(M)IT/MIT (3:1) per L of water to be treated. Regardless of the manner of treatment, the total concentration of the active ingredient C(M)IT/MIT (3:1) in the system should not exceed 14,9 mg/L in the sump water. Preliminary steps prior to addition: The biocidal product is automatically dosed to the system. Manual handling is necessary for the loading of the biocidal product into the dosing systems. Application Frequency: Nominally every 2 to 3 days or as needed to obtain control. Repeat until fouling is reduced to an acceptable level for controlling the microbial growth. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— Respect the conditions of use of the product (concentration, contact time, temperature, pH, etc.).
— The CMIT/MIT biocidal products are used after a shock dose of free chlorine in this application as standard industry practice.
— Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
— During mixing and loading and cleaning of the dispensing pumps, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT04: Food and feed area |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data |
| Field(s) of use | indoor use Preservation of fluids in conveyor belts and pasteurisers The biocidal product is used for the preservation of process fluids in pasteurisers and conveyor belts used in food industry. The biocidal product is used in these systems to either control or kill bacteria and fungi. |
| Application method(s) | Method: closed system Detailed description: Automated dosing The biocidal product is dosed automatically in the heat transfer fluid, in a place of good mixing (e.g. collecting sump below the conveyor belt). |
| Application rate(s) and frequency | Application Rate: Curative application: Bacteria, yeasts and fungi When the system is noticeably fouled, apply 10 to 14,9 g C(M)IT/MIT (3:1) per m3 of water to be treated as post treatment after a shock dose of minimum 0,3 ppm of free chlorine Preventive application: Bacteria: When control is obtained, add a continuous or semi continuous feed of 2,5 to 5 g C(M)IT/MIT (3:1) per m3 of water to be treated. - Number and timing of application: Curative application: Bacteria, yeasts and fungi When the system is noticeably fouled, apply 10 to 14,9 g C(M)IT/MIT (3:1) per m3 of water to be treated as post treatment after a shock dose of minimum 0,3 ppm of free chlorine. Contact time of 1 hour. Preventive application: Bacteria: When control is obtained, add a continuous or semi continuous feed of 2,5 to 5 g C(M)IT/MIT (3:1) per m3 of water to be treated. Preliminary steps prior to addition: The biocidal product is automatically dosed to system. Manual handling is necessary for the loading of containers containing the biocidal product into the dosing systems. Application Frequency: Nominally every 2 to 3 days or as needed to obtain control. Repeat until fouling is reduced to an acceptable level for controlling the microbial growth. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— Respect the conditions of use of the product (concentration, contact time, temperature, pH, etc.).
— The CMIT/MIT biocidal products are used after a shock dose of free chlorine in this application as standard industry practice.
— Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
— During mixing and loading and cleaning of the dispensing pumps, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT04: Food and feed area |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data |
| Field(s) of use | indoor use Long term offline preservation of reverse osmosis membranes used in potable water The C(M)IT/MIT (3:1) biocidal product is recommended for controlling biological growth in off-line trains reverse osmosis membranes producing potable water for extended periods of time. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. It is recommended that fouled membranes be cleaned prior to shut-down and preservation. Please refer to RO /NF supplier manual for membrane cleaning and system shutdown procedures. The biocidal product should be dispensed as a tankside additive into the circulating use-dilution of the fluid, using a metering pump or by manual pouring, at a point to assure adequate mixing throughout the system. After complete filling of the trains RO/NF systems with the biocide solution, pumps are stopped (Off line treatment) for extended periods of time. Typically C(M)IT/MIT (3:1) solutions are prepared in the CIP (cleaning in place) tank and added via the dosing system. Dilution with the permeate water or high quality water is recommended for the preparation of the biocide solution. Membranes should be soaked in the biocide solution during the shut-down period. |
| Application rate(s) and frequency | Application Rate: 7,5 -20 g of C(M)IT/MIT (3:1)/ m3 of water - Number and timing of application: 7,5 -20 g of C(M)IT/MIT (3:1)/ m3 of water |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— Respect the conditions of use of the product (concentration, contact time, temperature, pH, etc.).
— Prior to taking the membranes back on-line, flush carefully the elements with permeate water in order to eliminate all the residual biocidal product.
— Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
— During mixing and loading and cleaning of the whole system, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | indoor use outdoor use Preservation of paints and coatings (including electrodeposition) The biocidal product is recommended to control the growth of bacteria and yeasts in coatings applied by an electrodeposition process and associated rinse systems and in water-based paints and coatings in storage containers before use. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. The biocidal product should be dispensed as a tankside additive into the fluid, using a metering pump or by manual pouring, at a point to assure adequate mixing throughout the system. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional paints and general public paints: 7,5-14,9 mg/kg C(M)IT/MIT (3:1) in final product. - Number and timing of application: The biocidal product is added at the time of manufacture, storage or shipment. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional paints and general public paints: 7,5-14,9 mg/kg C(M)IT/MIT (3:1) in final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed to professional users and to the general public.
— During handling phases of products from Meta SPC 1, 2, 3 and 4 (Mixing and Loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— The maximal concentration of products from Meta SPC 1, 2, 3 and 4 to be added in paints used must be below the threshold value of 15 ppm.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data |
| Field(s) of use | indoor use Preservation of detergents (washing and cleaning fluids) and household products. The biocidal product is recommended for the control of bacteria, yeast and fungi in detergents and cleaning fluids (i.e. hard surface cleaners (all-purpose cleaners), hand dish washing products, fabric softeners, laundry detergents), products used for car care, floor care, waxes, hard surface cleaners, pre-moistened sponges or mops, and the surfactants used in these types of products. |
| Application method(s) | Method: closed system Detailed description: Manual and automated application. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional and general public uses: 6-14,9 mg/kg C(M)IT/MIT (3:1) in final product. - Number and timing of application: The biocidal product is added at single dose at the time of manufacturing, storage or shipment. To ensure uniform distribution, slowly disperse using automated metering or manual addition, into product with agitation. Mix thoroughly until evenly dispersed throughout the product. Institutional and Household products: (detergents, cleaners, softeners, etc.) Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional and general public uses: 6-14,9 mg/kg C(M)IT/MIT (3:1) in final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed to professional users and to the general public.
— During handling phases of products from Meta SPC 1 and 3 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— The maximal concentration of products from Meta SPC 1 and 3 to be added in detergents and household products used must be below the threshold value of 15 ppm.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data |
| Field(s) of use | indoor use Preservation of fluids used in paper, textile and leather production - The biocidal product is used to reduce contamination by bacteria in textile additives (woven and non-woven, natural and synthetic including silicone emulsions) processing chemicals, all chemicals used in the leather process industry and paper additives (e.g. water pigment pastes, starch, natural gums, synthetic and natural latexes, sizing agents, coating binders, retention aids, dyes, fluorescent whitening agents, wet-strength resins) used in paper mills. The biocidal product inhibits the growth microorganisms, which would otherwise lead to odours formation, viscosity alteration, discolouration of product and premature product failure. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: 16 to 30 mg/kg of C(M)IT/MIT (3:1) in final product - Number and timing of application: The biocidal product is added at single dose at time of manufacturing, storage or shipment. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: Curative treatment: 16 to 30 mg/kg of C(M)IT/MIT (3:1) in final product Contact time: 24 hours For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
— During handling phases of products from Meta SPC 1, 2, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— The maximal products concentration used for the preservation of fluids used in paper, textile and leather production being above the threshold value of 15 ppm, exposure has to be limited by use of PPE protecting skin and mucous membranes potentially exposed and application of technical and organisational RMM: — Minimisation of manual phases; — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | indoor use Preservation of glues and adhesives The biocidal product is recommended to control the growth of bacteria and yeasts in water-soluble and water-dispersed synthetic and natural adhesives and tackifiers in storage containers before use |
| Application method(s) | Method: closed system Detailed description: Manual and automated application. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: 8-30 mg/kg C(M)IT/MIT (3:1) in final product. General public uses: 8-14,9 mg/kg C(M)IT/MIT (3:1) in final product. - Number and timing of application: The biocidal product is added at single dose at the time of manufacture, storage or shipment. To ensure uniform distribution, slowly disperse using automated metering or manual addition, into product with agitation. Mix thoroughly until evenly dispersed throughout the product. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: 8-30 mg/kg C(M)IT/MIT (3:1) in final product. General public uses: 8-14,9 mg/kg C(M)IT/MIT (3:1) in final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed to professional users and to the general public. For products distributed to the general public the maximal concentration used must be below the threshold value of 15 ppm.
— During handling phases of products from Meta SPC 1, 2, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— For professional users, the maximal products concentration used for the preservation of glues and adhesives being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM: — Minimisation of manual phases; — Use of a dosing device; — Regular cleaning of equipment and work area; — Good standard of general ventilation; — Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data |
| Field(s) of use | indoor use Preservation of polymer latexes The biocidal product is recommended for the control of bacteria, yeast and fungi in the manufacture, storage, and transport of latexes, synthetic polymers including Hydrolysed Poly Acryl Amide (HPAM) and biopolymers (e.g. xanthan, dextran..) natural latexes. |
| Application method(s) | Method: closed system Detailed description: Manual and automated application. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: 14,9 - 50 mg /kg of C(M)IT/MIT (3:1) in final product. - Number and timing of application: The biocidal product is added at single dose at the time of manufacture, storage or shipment. To ensure uniform distribution, slowly disperse using automated metering or manual addition, into product with agitation. Mix thoroughly until evenly dispersed throughout the product. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses 14,9 - 50 mg /kg of C(M)IT/MIT (3:1) in final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
— During handling phases of products from Meta SPC 1, 2, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— The maximal products concentration used for the preservation of polymer lattices being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM: — Minimisation of manual phases; — Use of a dosing device; — Regular cleaning of equipment and work area; — Good standard of general ventilation; — Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | indoor use outdoor use Preservation of biocides and fertilizers The biocidal product is recommended to control the growth of bacteria and yeasts in fertilizers and biocidal products. |
| Application method(s) | Method: - Detailed description: Manual and automated application. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: 10- 30 mg/kg of C(M)IT/MIT (3:1) in final product. - Number and timing of application: The biocidal product is added at single dose at the time of manufacture, storage or shipment. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: 10- 30 mg/kg of C(M)IT/MIT (3:1) in final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
— During handling phases of products from Meta SPC 1 and 3 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— For professional users, the maximal products concentration used for the preservation of biocides and fertilizers being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM: — Minimisation of manual phases; — Use of a dosing device; — Regular cleaning of equipment and work area; — Good standard of general ventilation; — Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data |
| Field(s) of use | indoor use Preservation of mineral slurries The biocidal product is recommended to control the growth of bacteria in aqueous-based inorganic/mineral slurries and inorganic pigments which are formulated into paints, coatings and paper. |
| Application method(s) | Method: closed system Detailed description: Manual and automated application. The biocidal product should be dispensed as a tankside additive into the circulating use-dilution of the fluid, using a metering pump or by manual pouring, at a point to assure adequate mixing throughout the system. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: 10- 30 mg/kg of C(M)IT/MIT (3:1) in final product. - Number and timing of application: The biocidal product is added at single dose at the time of manufacture, storage or shipment. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: 10- 30 mg/kg of C(M)IT/MIT (3:1) in final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
— During handling phases of products from Meta SPC 1, 2, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
The maximal products concentration used for the preservation of mineral slurries being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM:
— Minimisation of manual phases;
— Use of a dosing device;
— Regular cleaning of equipment and work area;
— Good standard of general ventilation;
— Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | indoor use Preservation of building (construction) products (including sealants, caulks, plasters etc.) The biocidal product is recommended to control the growth of bacteria in building (construction) products (sealants, caulks, biopolymers, plasters, fillers, admixtures concrete additives, joints compounds,..). |
| Application method(s) | Method: - Detailed description: Manual and automated dosing. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: Add at typical use rate between 16,2-30 mg C(M)IT/MIT (3:1) per Kg final product to be treated. - Number and timing of application: The biocidal product is added at single dose at the time of manufacture, storage or shipment. Slowly dispense using automated metering or manually. Mix thoroughly until the biocidal product is evenly dispersed. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: Add at typical use rate between 16,2-30 mg C(M)IT/MIT (3:1) per Kg final product to be treated. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
— This use is restricted to the preservation of building material applied indoor only.
— During handling phases for products from Meta SPC 1, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
For professional users, the maximal products concentration used for the preservation of building products being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM:
— Minimisation of manual phases;
— Regular cleaning of equipment and work area;
— Good standard of general ventilation;
— Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data |
| Field(s) of use | indoor use Preservation of electronic chemicals The biocidal product is used to reduce contamination by bacteria, yeasts and fungi in electronic chemicals as Chemical Mechanical Polishing (CMP) silica slurries. |
| Application method(s) | Method: closed system Detailed description: Manual and automated application. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: Add at typical use rate between 10-30 mg C(M)IT/MIT (3:1) per L final product to be treated. - Number and timing of application: The biocidal product is added at single dose at the time of manufacture, storage or shipment. Slowly dispense using automated metering or manually. Mix thoroughly until the biocidal product is evenly dispersed. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses Curative treatment: 10-30 mg C(M)IT/MIT (3:1) per kg final product to be treated. Contact time: 7 days For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
— During handling phases for products from Meta SPC 3 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— The maximal products concentration used for the preservation of electronic chemicals being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM: — Minimisation of manual phases; — Use of a dosing device; — Regular cleaning of equipment and work area; — Good standard of general ventilation; — Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | indoor use Preservation of inks The biocidal product is recommended to control the growth of bacteria and yeasts in inks and ink components (printing inks lithographic, photographic, ink-jet fluids, water based dampening or fountain solutions inks used for textile printing). The biocidal product inhibits the growth of microorganisms, which would otherwise lead to odour formation, viscosity alteration, product discolouration and premature product failure. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: 6-30 mg C(M)IT/MIT (3:1) /kg final product. General public uses: 6-14,9 mg C(M)IT/MIT (3:1) /kg final product. - Number and timing of application: The biocidal product is added at single dose at time of manufacturing, storage or shipment. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: 6-30 mg C(M)IT/MIT (3:1) /kg final product. General public uses: 6-14,9 mg C(M)IT/MIT (3:1) /kg final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed to professional users and to the general public. For products distributed to the general public the maximal concentration used must be below the threshold value of 15 ppm.
— During handling phases of products from Meta SPC 1, 2, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— For professional users, the maximal products concentration used for the preservation of inks being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM: — Minimisation of manual phases; — Use of a dosing device; — Regular cleaning of equipment and work area; — Good standard of general ventilation; — Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data |
| Field(s) of use | indoor use Preservation of functional fluids (hydraulic fluids, antifreeze, corrosion inhibitors, etc. - excluding fuel additives) The biocidal product is recommended to control the growth of bacteria in functional fluids such as brake and hydraulic fluids, antifreeze additives, corrosion inhibitors, spinning fluids. The biocidal product inhibits the growth microorganisms, which would otherwise lead to odours formation, viscosity alteration, discolouration of product and premature product failure. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: Add at a typical use rate between 6 to 30 mg C(M)IT/MIT (3:1) per kg final product to be treated. - Number and timing of application: The biocidal product is added at single dose at time of manufacturing, storage or shipment. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: Add at a typical use rate between 6 to 30 mg C(M)IT/MIT (3:1) per kg final product to be treated For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
— During handling phases of products from Meta SPC 1, 2, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— The maximal products concentration used for the preservation of functional fluids (hydraulic fluids, antifreeze, corrosion inhibitors, etc…) being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM: — Minimisation of manual phases; — Use of a dosing device; — Regular cleaning of equipment and work area; — Good standard of general ventilation; — Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | indoor use Preservation of laboratory reagents . The biocidal product is recommended to control the growth of bacteria and yeasts in laboratory reagents. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional use: Add at typical use rate of 15,2 mg C(M)IT/MIT (3:1) per kg final product to be treated. - Number and timing of application: The biocidal product is added at single dose at the time of manufacture, storage or shipment. Slowly dispense using automated metering or manually. Mix thoroughly until the biocidal product is evenly dispersed. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional use: Add at typical use rate of 15,2 mg C(M)IT/MIT (3:1) per kg final product to be treated. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 1 L — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
— The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
— During handling phases for products from Meta SPC 1, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
For professional users, the maximal products concentration used for the preservation of laboratory reagents being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM:
— Minimisation of manual phases;
— Use of a dosing device;
— Regular cleaning of equipment and work area;
— Good standard of general ventilation;
— Training and management of staff on good practice.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT06: Preservatives for products during storage |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data |
| Field(s) of use | indoor use Offline preservation of industrial reverse osmosis membranes The biocidal product is recommended to control the growth of bacteria of reverse osmosis and nanofiltration membranes producing industrial water for extended periods of time. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. The biocidal product should be dispensed as a tankside additive into the circulating use-dilution of the fluid, using a metering pump or by manual pouring, at a point to ensure adequate mixing throughout the system. After complete filling of the trains RO/NF systems with the biocide solution, pumps are stopped (Off line treatment) for extended periods of time. Typically C(M)IT/MIT (3:1) solutions are prepared in the CIP (cleaning in place) tank and added via the dosing system. Dilution with permeate water or high quality water is recommended for the preparation of the biocide solution. Membranes should be soaked in the biocide solution during the shut-down period. |
| Application rate(s) and frequency | Application Rate: 7,5–20 g/m3 (ppm w/v) of C(M)IT/MIT (3:1). - Number and timing of application: 7,5–20 g/m3 (ppm w/v) of C(M)IT/MIT (3:1). |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
— The preservative can be added at any stage of the production of the product.
— Earliest possible addition is recommended for optimal protection.
— Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
— It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
— The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
Rinse the system with water prior to perform the maintenance of the system.
— During handling phases for products from Meta SPC 1, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT11: Preservatives for liquid-cooling and processing systems |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria (including Legionella pneumophila) Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data |
| Field(s) of use | indoor use outdoor use Preservation of liquids used in closed recirculating cooling systems (Closed re-circulating cooling water systems comprise compressor cooling, air conditioning chilled water, boilers, engine jacket cooling, power supply cooling, and other industrial processes). The biocidal product is used to control the growth of aerobes and anaerobes bacteria, yeast, fungi, and biofilm in the circulating water of closed systems |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. |
| Application rate(s) and frequency | Application Rate: Curative efficacy:- against bacteria (including L. pneumophila) at 5 - 14,9 g C(M)IT/MIT (3:1) / m3 of water. Contact time: 24 hours - against biofilm: 14,9 g C(M)IT/MIT (3:1) / m3 of water. Contact time: 24 hours.- against fungi and yeasts at 1 – 3 g C(M)IT/MIT (3:1) / m3 of water. Contact time: 48 hours. Preventive efficacy:- against bacteria (including L. pneumophila) at 3 – 14,9 g C(M)IT/MIT (3:1) / m3 of water. - against biofilm (including L. pneumophila): 3 g C(M)IT/MIT (3:1) / m3 of water. - Number and timing of application: Curative efficacy: — against bacteria (including L. pneumophila) at 5 - 14,9 g C(M)IT/MIT (3:1) / m3 of water. Contact time: 24 hours — against biofilm: 14,9 g C(M)IT/MIT (3:1) / m3 of water. Contact time: 24 hours — against fungi and yeasts at 1 – 3 g C(M)IT/MIT (3:1) / m3 of water. Contact time: 48 hours Preventive efficacy: against bacteria (including L. pneumophila) at 3 – 14,9 g C(M)IT/MIT (3:1) / m3 of water. against biofilm (including L. pneumophila): 3 g C(M)IT/MIT (3:1) / m3 of water. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
Microbiological tests to prove adequacy of preservation have to be undertaken by the user of C(M)IT/MIT products in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the manufacturer of the preservative product.
— Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
— During handling phases (mixing and loading) and cleaning of the dispensing pumps, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT11: Preservatives for liquid-cooling and processing systems |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria (including Legionella pneumophila) Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data Scientific name: no data Common name: Algae (green algae and cyanobacteria) Development stage: no data |
| Field(s) of use | indoor use outdoor use Preservation of liquids used in small open recirculating cooling systems (blowdown and recirculating flow rates, as well as total volume of water limited to 2 m3/h, and 100 m3/h and 300 m3 respectively) Process and cooling water: Used to control the growth of bacteria, algae, fungi and biofilm |
| Application method(s) | Method: open system Detailed description: Manual and automated dosing. . |
| Application rate(s) and frequency | Application Rate: Curative treatment Against bacteria (including L. pneumophila) at 5 – 14,9 g C(M)IT/MIT (3:1) / m3 of water , - against biofilm (including L. pneumophila) at 1,5 to 14,9 g C(M)IT/MIT (3:1) / m3 of water, - against fungi (including yeast) at 1 – 14,9 g C(M)IT/MIT (3:1) / m3 of water. Preventive treatment: - Against bacteria, green algae and cyanobacteria at 3 g C(M)IT/MIT (3:1) / m3 of water, - against biofilm (including L. pneumophila) at 3 g C(M)IT/MIT (3:1) / m3 of water. - Number and timing of application: Curative treatment: — Against bacteria (including L. pneumophila) at 5 – 14,9 g C(M)IT/MIT (3:1) / m3 of water Contact time: 24 hours — against biofilm (including L. pneumophila) at 1,5 - 14,9 g C(M)IT/MIT (3:1) / m3 of water Contact time: 48 hours. — against fungi and yeast at 1 – 14,9 g C(M)IT/MIT (3:1) / m3 of water Contact time: 48 hours. Preventive treatment: — against bacteria, green algae and cyanobacteria at 3 g C(M)IT/MIT (3:1) / m3 of water. — against biofilm (including L. pneumophila) at 3 g C(M)IT/MIT (3:1) / m3 of water. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
Microbiological tests to prove adequacy of preservation have to be undertaken by the user of C(M)IT/MIT products in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the manufacturer of the preservative product.
— Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
— During handling phases (mixing and loading) and cleaning of the dispensing pumps, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— Cooling fluid must not enter surface water directly. Use product only in premises that are connected to a STP.
— The product can only be used when the cooling towers are equipped with drift eliminators that reduce the drift at least by 99%.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT11: Preservatives for liquid-cooling and processing systems |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria (including Legionella pneumophila) Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data Scientific name: no data Common name: Algae (green algae and cyanobacteria) Development stage: no data |
| Field(s) of use | indoor use outdoor use Preservation of liquids used in non-food pasteurizers and conveyor belts, air washers. |
| Application method(s) | Method: - Detailed description: The biocidal product is dosed automatically in the heat transfer fluid, in a place of good mixing (e.g. collecting sump below the conveyor belt). The feeding pipe is used to dose the biocidal product below the water level in order to limit its evaporation. |
| Application rate(s) and frequency | Application Rate: Curative treatment: -against bacteria (including L. pneumophila): 5 - 14,9 g C(M)IT/MIT (3:1) / m3 of water - against biofilm (including L. pneumophila) at 1,5 - 14,9 g C(M)IT/MIT (3:1) / m3 of water - against fungi and yeast at 1 – 14,9 g C(M)IT/MIT (3:1) / m3 of water. Preventive treatment: Against bacteria, green algae and cyanobacteria at 3 g C(M)IT/MIT (3:1) / m3 of water, against biofilm (including L. pneumophila) at 3 g C(M)IT/MIT (3:1) / m3 of water. - Number and timing of application: Curative treatment: against bacteria (including L. pneumophila): 5 - 14,9 g C(M)IT/MIT (3:1) / m3 of water. Contact time: 24 hours — against biofilm (including L. pneumophila) at 1,5 - 14,9 g C(M)IT/MIT (3:1) / m3 of water Contact time: 48 hours. — against fungi and yeast at 1 – 14,9 g C(M)IT/MIT (3:1) / m3 of water Contact time: 48 hours. Preventive treatment: — Against bacteria, green algae and cyanobacteria at 3 g C(M)IT/MIT (3:1) / m3 of water. — against biofilm (including L. pneumophila) at 3 g C(M)IT/MIT (3:1) / m3 of water. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
Microbiological tests to prove adequacy of preservation have to be undertaken by the user of C(M)IT/MIT products in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the manufacturer of the preservative product.
Air washers: For use only in industrial air-washer systems that maintain effective mist eliminating components.
— Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
— During handling phases (mixing and loading) and cleaning of the dispensing pumps, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT11: Preservatives for liquid-cooling and processing systems |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: fungi Common name: other Development stage: no data |
| Field(s) of use | indoor use outdoor use Preservation of wood treatment solutions for application on wood of classes 1, 2 and 3 only. The biocidal product is used as a preservative for aqueous wood preservative treatment solution during the wet-state process used in timber treatment solutions. |
| Application method(s) | Method: - Detailed description: - |
| Application rate(s) and frequency | Application Rate: Preventive treatment: against fungi: 15 - 50 g C(M)IT/MIT (3:1) / m3 of in use wood preservation solution - Number and timing of application: Preventive treatment: against fungi: 15 - 50 g C(M)IT/MIT (3:1) / m3 of in use wood preservation solution |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
Microbiological tests to prove adequacy of preservation have to be undertaken by the user of C(M)IT/MIT products in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the manufacturer of the preservative product.
— The biocidal product is not intended to function as a wood preservative against wood destroying fungus relative to product type 8.
— During handling phases (mixing and loading) and cleaning phases, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— The product shall not be used in a wood treatment solution to be applied to wood which may come in direct contact with food, feeding stuff and livestock animals
— The product can be used to preserve wood treatment solutions for the treatment of wood in use classes 1, 2 and 3 only.
— The product can be used in a wood treatment solution where the industrial application processes of wood treatment can be carried out within a contained area situated on impermeable hard standing with bunding to prevent run-off and a recovery system in place (e.g. sump).
— The product can be used in wood treatment solutions for the preservation of freshly treated timber, which after treatment is stored under shelter or on impermeable hard standing, or both, to prevent direct losses to soil, sewer or water. Any losses of wood treatment solution shall be collected for reuse or disposal.
— The product can be used only in wood treatment solutions for industrial application if these cannot be released to soil, ground- and surface water or any kind of sewer and the wood treatment solutions and/or the product are collected and reused or disposed of as hazardous waste.
— The biocidal product can be used only in wood treatment solutions used for the treatment of objects or materials which are stored until completely dried on impermeable ground and under roof, to avoid leakage into the soil.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT11: Preservatives for liquid-cooling and processing systems |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data |
| Field(s) of use | indoor use Preservation of recirculating fluids used in textile, fiber processing, leather processing, photo-processing and fountain solution systems C(M)IT/MIT (3:1) biocidal products are used for the preservation of textile and spinning fluids, photo processing solutions, leather process (e.g. washing and soaking treatment stages) and printing fountain solutions to control the integrity of recirculating fluid by reducing microbial contamination in the bulk solution. |
| Application method(s) | Method: - Detailed description: Manual and automated dosing.The preservation of all end-products is performed in most cases highly automated by industrial usersThe biocidal product is added to the central sump, basin or recirculating lines in an area with adequate mixing. |
| Application rate(s) and frequency | Application Rate: Curative treatment: Against bacteria at 16-30 mg C(M)IT/MIT (3:1) per L of fluid - Number and timing of application: Curative treatment: Against bacteria at 16-30 mg C(M)IT/MIT (3:1) per L of fluid Contact time 5 days |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
Microbiological tests to prove adequacy of preservation have to be undertaken by the user of C(M)IT/MIT products in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the manufacturer of the preservative product.
— Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
— During handling phases (mixing and loading) and cleaning of the dispensing pumps, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM: — Minimisation of manual phases (process automation); — Use of a dosing device; — Regular cleaning of equipment and work area; — Avoidance of contact with contaminated tools and objects; — Good standard of general ventilation; — Training and management of staff on good practice.
— PPE is as follows: — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information); — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information); — Eye protection; — Substance/task appropriate respirator if ventilation is inadequate.
— Liquids used in textile and fiber processing fluids must not enter surface water directly. Use product only in premises that are connected to a STP.
— Recirculating liquids in photoprocessing systems and fountain solution systems must not enter surface water directly. Use product only in premises that are connected to a STP.
See general directions for use.
See general directions for use.
See general directions for use.
| Product type | PT11: Preservatives for liquid-cooling and processing systems |
|---|---|
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | indoor use Preservation of re-circulating liquids used in paint spray booths and electrodeposition coating systems. The biocidal product is used for preservation of fluids in pre- treatment processes (Cleaning treatment for grease removal and soil, degreasing Phosphating process, Rinse off tanks) paint spray booths and electrodeposition coating systems (e.g. cataphoretic baths) applied in Car Refinishing and Original equipment Car Manufacturing to control the integrity of recirculating fluid by reducing microbial contamination from bacteria and fungi in the bulk solution. |
| Application method(s) | Method: - Detailed description: - |
| Application rate(s) and frequency | Application Rate: Preventive treatment: 7,5 to 30 mg C(M)IT/MIT (3:1) per Kg final product. - Number and timing of application: Preventive treatment: 7,5 to 30 mg C(M)IT/MIT (3:1) per Kg final product. The biocidal product is added at the time of manufacture, storage or shipment. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
Microbiological tests to prove adequacy of preservation have to be undertaken by the user of C(M)IT/MIT products in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the manufacturer of the preservative product.
— Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.