Legalize
Legalize / European Union / Implementing Regulation

Commission Implementing Regulation (EU) 2020/683 of 15 April 2020 implementing Regulation (EU) 2018/858 of the European Parliament and of the Council with regards to the administrative requirements for the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles

Type Implementing Regulation
Publication 2020-05-26
Last updated 2024-01-01
State In force
Department European Commission, GROW
Source EUR-Lex
articles 9
Reform history JSON API
  • 6.2.4.Air-suspension for non-driving axle(s): yes/no (4)
  • 6.2.4.1.Suspension of non-driving axle(s) equivalent to air-suspension: yes/no (4)
  • 6.6.1.Tyre/wheel combination(s)
  • 6.6.1.1.Axles
  • 6.6.1.1.1.Axle 1: …
6.6.1.1.1.1. Tyre size designation 6.6.1.1.1.2. Load-capacity index 6.6.1.1.1.3. Speed category symbol (80) 6.6.1.1.1.4. Wheel rim size(s) 6.6.1.1.1.5. Wheel off-set(s) 6.6.1.1.1.6. Rolling resistance coefficient (RRC)
  • 6.6.1.1.2.Axle 2: …
6.6.1.1.2.1. Tyre size designation 6.6.1.1.2.2. Load-capacity index 6.6.1.1.2.3. Speed category symbol (80) 6.6.1.1.2.4. Wheel rim size(s) 6.6.1.1.2.5. Wheel off-set(s) 6.6.1.1.2.6. Rolling resistance coefficient (RRC)
  • etc.
  • 6.6.1.2.Spare wheel, if any: …
  • 6.6.2.Upper and lower limit of rolling radii
  • 6.6.2.1.Axle 1: …
  • 6.6.2.2.Axle 2: …
  • etc.
  • 6.7.Tyre pressure monitoring system (TPMS)
  • 6.7.1.Presence: yes/no (4)
7. STEERING
  • 7.2.Transmission and control
  • 7.2.1.Type of steering transmission (specify for front and rear, if applicable): …
  • 7.2.2.Linkage to the wheels (including other than mechanical means; specify for front and rear, if applicable): …
  • 7.2.3.Method of assistance, if any: …
8. BRAKES
  • 8.5.Antilock braking system: yes/no/optional (4)
  • 8.9.Brief description of the braking system, according to paragraph 12 of Annex 2 to UN Regulation No 13: …
9. BODYWORK
  • 9.1.Type of bodywork using the codes defined in Part C of Annex I to Regulation (EU) 2018/858 or in case of a special purpose vehicle the codes defined in point 5 to Part A of that Annex: …
  • 9.17.Statutory plates
  • 9.17.1.Photographs and/or drawings of the locations of the statutory plates and inscriptions and of the vehicle identification number: …
  • 9.17.2.Photographs and/or drawings of the statutory plate and inscriptions (completed example with dimensions): …
  • 9.17.3.Photographs and/or drawings of the vehicle identification number (completed example with dimensions): …
  • 9.17.4.1.The meaning of characters in the vehicle descriptor section (VDS) of the vehicle identification number (VIN) and, if applicable, the vehicle indicator section (VIS) thereof, to comply with the requirements of Section 5.3. of ISO Standard 3779:2009 shall be explained: ...
  • 9.17.4.2.If characters in the vehicle descriptor second section are used to comply with the requirements of section 5.4 of ISO Standard 3779:2009 these characters shall be indicated: …
9.26.   Aerodynamic device or equipment on the front of the vehicle
  • 9.26.1.Vehicle equipped with aerodynamic device or equipment on the front:
  • yes/no (6)
  • 9.26.2.Number of the type-approval certificate of the aerodynamic device or equipment, if available: …
  • Or, if not available provide the information below:
  • 9.26.3.Detailed description (including photographs or drawings) of the aerodynamic device or equipment (NB: taken over from the addendum to the TA certificate)
  • 9.26.3.1.Construction and materials: …
  • 9.26.3.2.Locking and adjustment system: …
  • 9.26.3.3.Attachment and mounting to the vehicle: …
9.27.   Aerodynamic device or equipment on the rear of the vehicle
  • 9.27.1.Vehicle equipped with aerodynamic device or equipment on the rear: yes/no (6)
  • 9.27.2.Number of the type-approval certificate of the aerodynamic device or equipment, if available: …
  • Or, if not available provide the information below:
  • 9.27.3.Detailed description (including photographs or drawings) of the aerodynamic device or equipment (NB: taken over from the addendum to the type-approval certificate)
  • 9.27.3.1.Construction and materials: …
  • 9.27.3.2.Locking and adjustment system: …
  • 9.27.3.3.Attachment and mounting to the vehicle: …
11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-TRAILERS
  • 11.1.Class and type of the coupling device(s) fitted or to be fitted: …
  • 11.5.Number(s) of the type-approval certificate (s): …
12. MISCELLANEOUS
  • 12.7.1.Vehicle equipped with a 24 GHz short-range radar equipment: yes/no (4)
16. ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATION
  • 16.1.Address of principal website for access to vehicle repair and maintenance information: ...

PART II

Matrix showing the combinations of the entries listed in Part I within the versions and variants of the vehicle type

Item No All Version 1 Version 2 Version 3 Version n

Notes:

  • (a)A separate matrix shall be compiled for each variant within the type.
  • (b)Entries for which there are no restrictions on their combination within a variant shall be listed in the column headed ‘all’.
  • (c)The above information may be presented in an alternative layout or merged with the information supplied in Part I.
  • (d)Each variant and each version shall be identified by an alphanumerical code consisting of a combination of letters and numbers, which shall also be indicated in the certificate of conformity (Annex VIII of this Regulation) of the vehicle concerned.
  • (e)Variant(s) which fall(s) under Part III of Annex II to Regulation (EU) 2018/858 shall be identified by a specific alphanumerical code.

PART III

Number(s) of the type-approvals

Supply the information required by the following table in respect of the applicable subjects for this vehicle in Annex II to Regulation (EU) 2018/858. (All relevant approvals for each subject shall be included. However, information in respect of components need not be given here so long as such information is included in the approval certificate relating to the installation prescriptions).

Item Subject Number of the type-approval certificate or of the test report (102) Member State or Contracting Party (103) issuing the type-approval (104) or technical service issuing the test report (102) Extension date Variant(s)/version(s)

Signed (108): …

Position in company: …

Date: …

ANNEX III

TEMPLATES FOR APPROVAL CERTIFICATES

1. General Description

  • 1.1.The approval certificates shall be issued in paper of maximum format A4 (210 × 297 mm), or in PDF-Format.
  • 1.2.All information on the approval certificates shall be provided in ISO 8859 series characters (for approval certificates issued in Bulgarian Language in Cyril characters, for approval certificates issued in Greek Language in Greek characters) and Arabic numerals.
  • 1.3.Model A shall be used for whole vehicle type-approvals.
  • Where this template is used for a national type-approval of vehicles produced in small series in accordance with Article 42(4) of Regulation (EU) 2018/858 it shall bear the heading ‘National small series vehicle type-approval certificate’.
  • 1.4.Model B shall be used for EU system type-approvals.
  • 1.5.Model C shall be used for EU component type-approvals and EU separate technical unit type-approvals.
  • 1.6.Model D shall be used for EU individual vehicle approvals.
  • 1.7.Model E shall be used for national individual vehicle approval.

MODEL A

(to be used for type-approval of a vehicle)

EU VEHICLE TYPE-APPROVAL CERTIFICATE
Identification of type-approval authority

Communication concerning granting/extension/refusal/withdrawal (4) of

  • — EU whole vehicle type-approval in accordance with Regulation (EU) 2018/858 (4)
  • — EU whole vehicle type-approval with exemptions for new technologies or concepts in accordance with Article 39(2) of Regulation (EU) 2018/858 authorised by the Commission in accordance with Article 39(3) thereof (4)
  • — Provisional EU whole vehicle type-approval with exemptions for new technologies or concepts in accordance with Article 39(2) of Regulation (EU) 2018/858 pending on the authorisation by the Commission in accordance with Article 39(4) thereof. The validity of the EU type-approval is thus limited to DD/MM/YYYY (4)
  • — EU type-approval of vehicles produced in small series in accordance with Article 41 of Regulation (EU) 2018/858 (4)
  • — National type-approval of vehicles produced in small series in accordance with Article 42 of Regulation (EU) 2018/858 (4)

of a type of:

  • — Complete vehicle (4)
  • — Completed vehicle (4)
  • — Incomplete vehicle (4)
  • — Vehicle with complete and incomplete variants (4)
  • — Vehicle with completed and incomplete variants (4)

Number of the EU type-approval certificate: …

Reason for extension/refusal/withdrawal (4): …

SECTION I

  • 0.1.Make (trade name of manufacturer): …
  • 0.2.Type: …
  • 0.2.1.Commercial name(s) (105): …
  • 0.3.Means of identification of type, if marked on the vehicle: …
  • 0.3.1.Location of that marking: …
  • 0.4.Category of vehicle (3): …
  • 0.5.Company name and address of manufacturer of the incomplete/complete/completed vehicle (4): …
  • 0.5.1.For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle …
  • 0.8.Name(s) and address(es) of assembly plant(s): …
  • 0.9.Name and address of the manufacturer’s representative (if any): …

SECTION II

  • 1.Technical service responsible for carrying out the tests (106): …
  • 2.Date of test report: …
  • 3.Number of test report: …

The undersigned hereby certifies the accuracy of the manufacturer’s description in the attached information document of the vehicle(s) described above, ((a) sample(s) having been selected by the EU type-approval authority and submitted by the manufacturer as prototype(s) of the vehicle type), and that the attached test results are applicable to the vehicle type.

  • 1.For complete and completed vehicles/variants (4):
  • The vehicle type meets/does not meet (4) the technical requirements of all the relevant regulatory acts referred to in Annex II to Regulation (EU) 2018/858.
  • 2.For incomplete vehicles/variants (4):
  • The vehicle type meets/does not meet (4) the technical requirements of the regulatory acts listed in the table in part 2 of this certificate
(Place) (Signature) (108) (Date)
  • Attachments: Information package.
  • Test results sheet in accordance with the template set out in Annex VI of this Regulation.
  • Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign certificates of conformity and a statement of their position in the company.
  • File containing the information referred to in paragraph 2 of Article 39 of Regulation (EU) 2018/858 (4)

EU VEHICLE TYPE-APPROVAL CERTIFICATE

Part 2

This EU type-approval is, where incomplete and completed vehicles, variants or versions are concerned, based on the approval(s) for incomplete vehicles listed below:

  • Stage 1: Manufacturer of the base vehicle: … Number of the EU type-approval certificate: … Dated: … Applicable to variants or versions (as appropriate): …
  • Stage 2: Manufacturer: … Number of the EU type-approval certificate: … Dated: … Applicable to variants or versions (as appropriate): …
  • Stage 3: Manufacturer: … Number of the EU type-approval certificate: … Dated: … Applicable to variants or versions (as appropriate): …

In the case where the approval includes one or more incomplete variants or versions (as appropriate), list those variants or versions (as appropriate) which are complete or completed.

Complete/completed variant(s): …

List of requirements applicable to the approved incomplete vehicle type, variant or version (as appropriate, taking account of the scope and latest amendment to each of the regulatory acts listed below).

Item Subject Regulatory act reference Last amended Applicable to variant or, if need be, to version

(List only subjects for which an EU type-approval exists.)

In the case of special purpose vehicles, exemptions granted or special provisions applied pursuant to Part III of Annex II to Regulation (EU) 2018/858, exemptions granted pursuant to Article 39 of Regulation (EU) 2018/858, and exemptions granted pursuant to Article 42 of Regulation (EU) 2018/858:

Item Subject Regulatory act reference Kind of approval and nature of exemption Applicable to variant or, if need be, to version

Appendix

List of regulatory acts to which the type of vehicle complies

(to be filled in only in the case of a whole-vehicle type-approval in accordance with Article 22(1)(b) and (c) of Regulation (EU) 2018/858).

Item Subject (107) Regulatory act reference (107) As amended by Applicable to variant or, if need be, to version

MODEL B

(to be used for type-approval of a system)

EU TYPE-APPROVAL CERTIFICATE
Identification of type-approval authority

Communication concerning granting/extension/refusal/withdrawal (4) of:

  • — EU system type-approval in accordance with Directive …/…/EC/Regulation (EU) No …/… (4) as last amended by Directive …/…/EC/Regulation (EU) No …/… (4)
  • — EU system type-approval with exemptions for new technologies or concepts in accordance with Article 39(2) of Regulation (EU) 2018/858 authorized by the Commission in accordance with Article 39(3) thereof (4)
  • — Provisional EU system type-approval with exemptions for new technologies or concepts in accordance with Article 39(2) of Regulation (EU) 2018/858 pending on the authorisation by the Commission in accordance with Article 39(4) thereof. The validity of the EU type-approval is thus limited to DD/MM/YYYY (4)

Number of the EU type-approval certificate: …

Reason for extension/refusal/withdrawal (4): …

SECTION I

  • 0.1.Make (trade name of manufacturer): …
  • 0.2.Type: …
  • 0.2.1.Commercial name(s) (if available): …
  • 0.3.Means of identification of type, if marked on the vehicle (2): …
  • 0.3.1.Location of that marking: …
  • 0.4.Category of vehicle (107): …
  • 0.5.Name and address of manufacturer: …
  • 0.8.Name(s) and address(es) of assembly plant(s): …
  • 0.9.Name and address of the manufacturer’s representative (if any): …

SECTION II

  • 1.Additional information (where applicable): see Addendum.
  • 2.Technical service responsible for carrying out the tests: …
  • 3.Date of test report: …
  • 4.Number of test report: …
  • 5.Remarks (if any): see Addendum.
  • 6.Place: …
  • 7.Date: …
  • 8.Signature (108): …
  • Attachments: Information package
  • Test report
  • File containing the information referred to in paragraph 2 of Article 39 of Regulation (EU) 2018/858 (4)

Addendum

to EU type-approval certificate number …

  • 1.Additional information
  • 1.1.[…]:
  • 1.1.1.[…]:

[…]

  • 2.List of the numbers of the type-approval certificates of components and/or separate technical units used for the type-approval of the system with EU type-approval certificate number ….. approved under Directive/Regulation (4): …
  • 2.1.[…]:
  • 3.Remarks
  • 3.1.[…]:

MODEL C

(to be used for type-approval of components or separate technical units)

EU TYPE-APPROVAL CERTIFICATE
Identification of type-approval authority

Communication concerning granting/extension/refusal/withdrawal (4) of:

  • — EU component/separate technical unit(4) type-approval in accordance with Directive …/…/EC/Regulation (EU) No …/… (4)
  • — EU component/separate technical unit (4) type-approval with exemptions for new technologies or concepts in accordance with Article 39(2) of Regulation (EU) 2018/858 authorized by the Commission in accordance with Article 39(3) thereof (4)
  • — Provisional EU component/separate technical unit (4) type-approval with exemptions for new technologies or concepts in accordance with Article 39(2) of Regulation (EU) 2018/858 pending on the authorisation by the Commission in accordance with Article 39(4) thereof. The validity of the EU type-approval is thus limited to DD/MM/YYYY (4)

The number of the EU type-approval certificate: …

Reason for extension/refusal/withdrawal (4): …

SECTION I

  • 0.1.Make (trade name of manufacturer): …
  • 0.2.Type: …
  • 0.3.Means of identification of type, if marked on the component/separate technical unit (2) (4): …
  • 0.3.1.Location of that marking: …
  • 0.5.Name and address of manufacturer: …
  • 0.7.In the case of components and separate technical units, location and method of affixing of the EU approval mark: …
  • 0.8.Name(s) and address(es) of assembly plant(s): …
  • 0.9.Name and address of the manufacturer’s representative (if any): …

SECTION II

  • 1.Additional information (where applicable): see Addendum
  • 2.Technical service responsible for carrying out the tests: …
  • 3.Date of test report: …
  • 4.Number of test report: …
  • 5.Remarks (if any): see Addendum
  • 6.Place: …
  • 7.Date: …
  • 8.Signature (108): …
  • Attachments: Information package.
  • Test report.
  • File containing the information referred to in paragraph 2 of Article 39 of Regulation (EU) 2018/858 (4)

Addendum

to EU type-approval certificate number …

  • 1.Additional information
  • 1.1.[…]:
  • 1.1.1.[…]:

[…]

  • 2.Restriction of use of the device (if any)
  • 2.1.[…]:
  • 3.Remarks
  • 3.1.[…]:

MODEL D

(to be used for EU individual vehicle approval)

EU INDIVIDUAL VEHICLE APPROVAL CERTIFICATE
e(4) Name, address, phone number and email-address of the individual approval authority

Communication concerning granting/refusal/withdrawal (4) of:

  • — EU individual vehicle approval in accordance with Article 44 of Regulation (EU) 2018/858

Number of the EU individual vehicle approval certificate: …

Reason for refusal/withdrawal (4): …

SECTION I

The undersigned [… …name and position] hereby certifies that the vehicle:

  • 0.1.Make (trade name of manufacturer): …
  • 0.2.Type: … Variant: … Version: …
  • 0.2.1.Commercial name: …
  • 0.2.2.For multi-stage approved vehicles, type-approval information of the base/previous stages vehicle (list the information for each stage) (4):
  • Manufacturer: …
  • Make: …
  • Type: … Variant: … Version: …
  • Category of vehicle (3): …
  • Number of the type-approval certificate, including extension number …
  • 0.2.3.Identifiers (where applicable) (1): …
  • 0.2.3.1.Interpolation family’s identifier: …
  • 0.4.Category of vehicle (107): …
  • 0.5.Name and address of the manufacturer: …
  • 0.6.Location and method of attachment of the statutory plates: …
  • Location of the vehicle identification number: …
  • 0.9.Name and address of the manufacturer’s representative (if any):
  • 0.10.Vehicle identification number: …
submitted for approval on […… date of application]
by […… Name and address of the applicant]

For multi-stage approved vehicles: the vehicle has been completed or altered (4) as follows: …

The vehicle complies with:

  • — Appendix 2 to Part I of Annex II to Regulation (EU) 2018/858;
  • — Part III of Annex II to Regulation (EU) 2018/858 EU (special purpose vehicles).

The vehicle can be permanently registered without further approval in Member States having right/left (4) hand traffic and using metric/imperial (4) units for the speedometer.
(Place) (Date) (Signature ( 108 )) (Stamp of the approval authority)
[…] […] […]
  • Attachments: Two photos ( 109 ) of the vehicle
  • (min resolution 640 x 480 pixel, ~7 x 10 cm).
  • In the case of an multi-stage approval, all certificates of conformity in paper format that were delivered at the previous stages.

SECTION II

  • 1.Technical service responsible for carrying out the tests: …
  • 2.Date of test report: …
  • 3.Number of test report: …
Part 2

(Part 2 shall consist of the information in Appendix 1 to this Annex for the vehicle category approved)

MODEL E

(to be used for national individual vehicle approval)

NATIONAL INDIVIDUAL VEHICLE APPROVAL CERTIFICATE
e(4) Name, address, phone number and email-address of the approval authority

Communication concerning granting/refusal/withdrawal (4) of:

  • — National individual vehicle approval in accordance with Article 45 of Regulation (EU) 2018/858

Number of the national individual vehicle approval certificate: …

Reason for refusal/withdrawal (4): …

SECTION I

The undersigned [… name and … position], hereby certifies that the vehicle:

  • 0.1.Make (trade name of manufacturer): …
  • 0.2.Type: … Variant: … Version: …
  • 0.2.1.Commercial name: …
  • 0.2.2.For multi-stage approved vehicles, type-approval information of the base/previous stages vehicle (list the information for each stage) (4):
  • Manufacturer: …
  • Make: …
  • Type: … Variant: … Version: …
  • Category of vehicle (3): …
  • Number of the type-approval certificate, including extension number …
  • 0.2.3.Identifiers (where applicable) (1): …
  • 0.2.3.1.Interpolation family’s identifier: …
  • 0.4.Category of vehicle (3): …
  • 0.5.Name and address of the manufacturer: …
  • 0.6.Location and method of attachment of the statutory plates: …
  • Location of the vehicle identification number: …
  • 0.9.Name and address of the manufacturer’s representative (if any): …
  • 0.10.Vehicle identification number: …
submitted for approval on […… date of application]
by […… Name and address of the applicant]

For multi-stage approved vehicles: the vehicle has been completed or altered (4) as follows: …

The vehicle complies with the regulatory acts listed in Annex II to Regulation (EU) 2018/858, with exemption(s) of the following regulatory acts: ………. The issuing Member State has imposed alternative requirements.

The vehicle can be permanently registered without further approval in (name of the Member State).
(Place) (Signature) (108) (Date)

SECTION II

  • 1.Technical service responsible for carrying out the tests: …
  • 2.Date of test report: …
  • 3.Number of test report: …
  • Attachments: Two photos (109) of the vehicle (optional)
  • (min resolution 640 x 480 pixel, ~7 x 10 cm).
  • In the case of an multi-stage approval, all certificates of conformity in paper format that were delivered at the previous stages.
Part 2

(Part 2 shall consist of the information in Appendix 1 to this Annex for the vehicle category approved)

Appendix 1

Part 2 of the EU individual vehicle approval certificate and of the national individual approval certificate

Category M1

General construction characteristics

  • 1.Number of axles: … and wheels (5): …
  • 3.Powered axles (number, position, interconnection): …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (4) (8)

Main dimensions

  • 4.Wheelbase (111): … mm
  • 4.1.Axle spacing: 1-2: … mm 2-3: … mm 3-4: … mm
  • 5.Length: … mm
  • 6.Width: … mm
  • 7.Height: … mm

Masses

  • 13.2.Actual mass of the vehicle:…kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static vertical mass at the coupling point: … kg

Power plant

  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual Fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …

Maximum speed

  • 29.Maximum speed: … km/h

Axles and suspension

  • 30.Axle(s) track: 1. … mm 2. … mm 3. … mm
  • 35.Fitted tyre/wheel combination/energy efficiency class of rolling resistance coefficients (RRC) and tyre category used for CO2 determination (if applicable) (160) (1): …

Bodywork

  • 38.Code for bodywork (113): …
  • 40.Colour of vehicle (114): …
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …
  • 42.1.Seat(s) designated for use only when the vehicle is stationary: …
  • 42.3.Number of wheelchair user accessible position: …

Environmental performances

  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min-1
  • Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro … or other legislation: …
  • 47.1.1.Test mass, kg: …
  • 48.Exhaust emissions  () () ():
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 48.1.Smoke corrected absorption coefficient: … (m–1)
  • 49.CO2 emissions/fuel consumption/electric energy consumption (162):
  • 1.all power train except pure electric vehicles
NEDC: CO2 emissions Fuel consumption
Combined: … g/km … l/100km/m3/100km (4)
Weighted, combined … g/km … l/100km/m3/100km (4)
  • Deviation factor (if applicable): …
  • Verification factor (if applicable) ‘1’ or ‘0’: …
  • 2.NEDC: pure electric vehicles and OVC hybrid electric vehicles
  • Electric energy consumption (weighted, combined (4)) … Wh/km
  • 3.Vehicle fitted with eco-innovation(s): yes/no (4)
  • 3.1.General code of the eco-innovation(s) (151): …
  • 3.2.Total CO2 emissions savings due to the eco-innovation(s) (68)
  • (repeat for each reference fuel tested):
  • 3.2.1.NEDC savings: … g/km (if applicable)
  • 3.2.2.WLTP savings: … g/km (if applicable)
  • 4.All power trains, except pure electric vehicle, under Commission Regulation (EU) 2017/1151 (117) (if applicable)
WLTP values CO2 emissions Fuel consumption
Combined (4): …g/km …l/100km/m3/100km/kg/100km (4)
Weighted, combined (4) …g/km …l/100km/m3/100km/kg/100km (4)
  • 5.Pure electric vehicles and OVC hybrid electric vehicles, under Regulation (EU) 2017/1151 (if applicable)
  • 5.1.Pure electric vehicles
Electric energy consumption … Wh/km
  • 5.2.OVC hybrid electric vehicles
Electric energy consumption (ECAC,weighted) … Wh/km
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks: …
  • 53.Additional information (mileage (118), …)
Category M2

General construction characteristics

  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: …
  • 2.Steered axles (number, position): …
  • 3.Powered axles (number, position, interconnection): …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (4) (8)

Main dimensions

  • 4.Wheelbase (111): … mm
  • 4.1.Axle spacing: 1-2: … mm 2-3: … mm 3-4: … mm
  • 5.Length: … mm
  • 5.3.Vehicle equipped with aerodynamic device or equipment on the front/rear/not equipped (4)
  • 6.Width: … mm
  • 7.Height: … mm
  • 9.Distance between the front end of the vehicle and the centre of the coupling device: … mm

Masses

  • 13.2.Actual mass of the vehicle: …kg
  • 13.3.Additional mass for alternative propulsion: … kg
  • 14.Mass of the base vehicle in running order: … kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.3.Technically permissible mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 17.Intended registration/in service maximum permissible masses in national/international traffic (4) (166)
  • 17.1.Intended registration/in service maximum permissible laden mass: … kg
  • 17.2.Intended registration/in service maximum permissible laden mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.3.Intended registration/in service maximum permissible laden mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.4.Intended registration/in service maximum permissible mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static vertical mass at the coupling point:… kg

Power plant

  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual Fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …

Maximum speed

  • 29.Maximum speed: … km/h

Axles and suspension

  • 30.Axle(s) track: 1. … mm 2. … mm 3. … mm
  • 33.Drive axle(s) fitted with air suspension or equivalent: yes/no (4)
  • 35.Fitted tyre/wheel combination/energy efficiency class of rolling resistance coefficients (RRC) and tyre category used for CO2 determination (if applicable) (160) (1): …

Brakes

  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)
  • 37.Pressure in feed line for trailer braking system: … kPa

Bodywork

  • 38.Code for bodywork (113): …
  • 39.Class of vehicle: class I/Class II/Class III/Class A/Class B (4)
  • 40.Colour of vehicle (114): …
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …
  • 42.1.Seat(s) designated for use only when the vehicle is stationary: …
  • 42.3.Number of wheelchair user accessible position: …
  • 43.Number of standing places: …

Coupling device

  • 44.Approval number or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …

Environmental performances

  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min–1
  • Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro … or other legislation: …
  • 48.Exhaust emissions  () () ():
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 48.1.Smoke corrected absorption coefficient: … (m–1)
  • 49.CO2 emissions/fuel consumption/electric energy consumption (162):
  • 1.all power train except pure electric vehicles
NEDC: CO2 emissions Fuel consumption
Combined: … g/km … l/100km/m3/100km (4)
Weighted, combined … g/km … l/100km
  • Deviation factor (if applicable): …
  • Verification factor (if applicable) ‘1’ or ‘0’: …
  • 2.NEDC: pure electric vehicles and OVC hybrid electric vehicles
  • Electric energy consumption (weighted, combined (4)) … Wh/km
  • 4.All power trains, except pure electric vehicle, under Regulation (EU) 2017/1151 (if applicable)
WLTP values CO2 emissions Fuel consumption
Combined(4): …g/km …l/100km/m3/100km/kg/100km
Weighted, combined4 … g/km …l/100km/m3/100km/kg/100km (4)
  • 5.Pure electric vehicles and OVC hybrid electric vehicles, under Regulation (EU) 2017/1151 (if applicable)
  • 5.1.Pure electric vehicles
Electric energy consumption … Wh/km
  • 5.2.OVC hybrid electric vehicles
Electric energy consumption (ECAC,weighted) … Wh/km
  • 49.1.Cryptographic hash of the manufacturer’s records file (4) (119): …
  • 49.2.Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
  • 49.3.Vocational vehicle: (yes/no) (4) (72) (170)
  • 49.4.Cryptographic hash of the customer information file: … (4) (120) (170)
  • 49.5.1.Specific CO2 emissions: ... gCO2/pkm (4) (171)
  • 49.6.1.Average occupancy (number of persons): ... (4) (172)
  • 49.7.Vehicle subgroup/group (4) (176): ...
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks: …
  • 53.Additional information (mileage (118), …)
Category M3

General construction characteristics

  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: …
  • 2.Steered axles (number, position): …
  • 3.Powered axles (number, position, interconnection): …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (4) (8)

Main dimensions

  • 4.Wheelbase (111): … mm
  • 4.1.Axle spacing: 1-2: … mm 2-3: … mm 3-4: … mm
  • 5.Length: … mm
  • 5.3.Vehicle equipped with aerodynamic device or equipment on the front/rear/not equipped (4)
  • 6.Width: … mm
  • 7.Height: … mm
  • 9.Distance between the front end of the vehicle and the centre of the coupling device: … mm

Masses

  • 13.2.Actual mass of the vehicle: …kg
  • 13.3.Additional mass for alternative propulsion: … kg
  • 14.Mass of the base vehicle in running order: … kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.3.Technically permissible mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 17.Intended registration/in service maximum permissible masses in national/international traffic (4) (166)
  • 17.1.Intended registration/in service maximum permissible laden mass: … kg
  • 17.2.Intended registration/in service maximum permissible laden mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.3.Intended registration/in service maximum permissible laden mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.4.Intended registration/in service maximum permissible mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static vertical mass at the coupling point:… kg

Power plant

  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual Fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …

Maximum speed

  • 29.Maximum speed: … km/h

Axles and suspension

  • 30.1.Track of each steered axle: … mm
  • 30.2.Track of all other axles: … mm
  • 32.Position of loadable axle(s): …
  • 33.Drive axle(s) fitted with air suspension or equivalent: yes/no (4)
  • 35.Tyre/wheel combination (160): …

Brakes

  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)
  • 37.Pressure in feed line for trailer braking system: … kPa

Bodywork

  • 38.Code for bodywork (113): …
  • 39.Class of vehicle: class I/Class II/Class III/Class A/Class B (4)
  • 40.Colour of vehicle (114): …
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …
  • 42.1.Seat(s) designated for use only when the vehicle is stationary: …
  • 42.3.Number of wheelchair user accessible position: …
  • 43.Number of standing places: …

Coupling device

  • 44.Approval number or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …

Environmental performances

  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min–1
  • Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro … or other legislation: …
  • 48.Exhaust emissions  () () ():
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 48.1.Smoke corrected absorption coefficient: … (m–1)
  • 49.CO2 emissions/fuel consumption/electric energy consumption
  • 49.1.Cryptographic hash of the manufacturer’s records file (4) (119): …
  • 49.2.Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
  • 49.3.Vocational vehicle: (yes/no) (4) (72) (170)
  • 49.4.Cryptographic hash of the customer information file: … (4) (120) (170)
  • 49.5.Specific CO2 emissions: ... gCO2/pkm (4) (171)
  • 49.6.Average occupancy (number of persons): … (4) (172)
  • 49.7.Vehicle subgroup/group (4) (176): …
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks: …
  • 53.Additional information (mileage (118), …)
Category N1

General construction characteristics

  • 1.Number of axles: … and wheels(5): …
  • 1.1.Number and position of axles with twin wheels: …
  • 3.Powered axles (number, position, interconnection): …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (4) (8)

Main dimensions

  • 4.Wheelbase (111): … mm
  • 4.1.Axle spacing: 1-2: … mm 2-3: … mm 3-4: … mm
  • 5.Length: … mm
  • 6.Width: … mm
  • 7.Height: … mm
  • 8.Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
  • 11.Length of the loading area: … mm

Masses

  • 13.2.Actual mass of the vehicle: … kg
  • 14.Mass of the base vehicle in running order: … kg (168)
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.2.Semi-trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static vertical mass at the coupling point: … kg

Power plant

  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC -HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual Fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum net power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …

Maximum speed

  • 29.Maximum speed: … km/h

Axles and suspension

  • 30.Axle(s) track: 1. … mm 2. … mm 3. … mm
  • 35.Fitted tyre/wheel combination/energy efficiency class of rolling resistance coefficients (RRC) and tyre category used for CO2 determination (if applicable) (160) (1): …

Bodywork

  • 38.Code for bodywork (113): …
  • 40.Colour of vehicle (114): …
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …
  • 42.1.Seat(s) designated for use only when the vehicle is stationary: …
  • 42.3.Number of wheelchair user accessible position: …

Coupling device

  • 44.Approval number or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values(4): D: …/V: …/S: …/U: …

Environmental performances

  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min-1
  • Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro … or other legislation: …
  • 47.1.1.WLTP test mass (1)
  • 48.Exhaust emissions  () () ():
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 49.CO2 emissions/fuel consumption/electric energy consumption (1):
  • 1.all power train except pure electric vehicles
NEDC: CO2 emissions Fuel consumption
Combined (4): … g/km …l/100km/m3/100km/kg/100km
Weighted, combined (4) … g/km … l/100km/m3/100km/kg/100km
  • Deviation factor (if applicable): …
  • Verification factor (if applicable) (‘0’ or ‘1’): …
  • 2.NEDC: pure electric vehicles and OVC hybrid electric vehicles
  • Electric energy consumption (weighted, combined) (4)… Wh/km
  • 3.Vehicle fitted with eco-innovation(s): yes/no (4)
  • 3.1.General code of the eco-innovation(s) (151): …
  • 3.2.Total CO2 emissions savings due to the eco-innovation(s) (68)
  • (repeat for each reference fuel tested):
  • 3.2.1.NEDC savings: … g/km (if applicable)
  • 3.2.2.WLTP savings: … g/km (if applicable)
  • 4.All power trains, except pure electric vehicle, under Regulation (EU) 2017/1151
  • (if applicable)
WLTP: CO2 emissions Fuel consumption
Combined (4) … g/km … l/100km/m3/100km/kg/100km (4)
Weighted, combined (4) … g/km … l/100km
  • 5.Pure electric vehicles and OVC hybrid electric vehicles, under Regulation (EU) 2017/1151 (if applicable)
  • 5.1.Pure electric vehicles
  • Electric energy consumption: … Wh/km
  • 5.2.OVC hybrid electric vehicles
  • Electric energy consumption (ECAC,weighted): … Wh/km

Miscellaneous

  • 50.Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (4):
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks: …
  • 53.Additional information (mileage (118), …)
Category N2

General construction characteristics

  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: …
  • 2.Steered axles (number, position): …
  • 3.Powered axles (number, position, interconnection): …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (4) (8)

Main dimensions

  • 4.Wheelbase (111): … mm
  • 4.1.Axle spacing: 1-2: … mm 2-3: … mm 3-4: … mm
  • 5.Length: … mm
  • 5.2.Elongated cab complying with Article 9a of Directive 96/53/EC: yes/no (4)
  • 5.3.vehicle equipped with aerodynamic device or equipment on the front/rear/not equipped (4)
  • 6.Width: … mm
  • 7.Height: … mm
  • 8.Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
  • 9.Distance between the front end of the vehicle and the centre of the coupling device: … mm
  • 11.Length of the loading area: … mm

Masses

  • 13.2.Actual mass of the vehicle: … kg
  • 13.3.Additional mass for alternative propulsion: … kg
  • 14.Mass of the base vehicle in running order: … kg (168)
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.3.Technically permissible mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 17.Intended registration/in service maximum permissible masses in national/international traffic (4) (166)
  • 17.1.Intended registration/in service maximum permissible laden mass: … kg
  • 17.2.Intended registration/in service maximum permissible laden mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.3.Intended registration/in service maximum permissible laden mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.4.Intended registration/in service maximum permissible mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.2.Semi-trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static vertical mass at the coupling point: … kg

Power plant

  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC -HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual Fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum net power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …

Maximum speed

  • 29.Maximum speed: … km/h

Axles and suspension

  • 31.Position of lift axle(s): …
  • 32.Position of loadable axle(s): …
  • 33.Drive axle(s) fitted with air suspension or equivalent: yes/no (4)
  • 35.Fitted tyre/wheel combination/energy efficiency class of rolling resistance coefficients (RRC) and tyre category used for CO2 determination (if applicable) (160) (1): …

Brakes

  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)
  • 37.Pressure in feed line for trailer braking system: … kPa

Bodywork

  • 38.Code for bodywork (113): …
  • 40.Colour of vehicle (114): …
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …

Coupling device

  • 44.Approval number or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …

Environmental performances

  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min-1
  • Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro … or other legislation: …
  • 47.1.1.WLTP test mass (1)
  • 48.Exhaust emissions  () () ():
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 49.CO2 emissions/fuel consumption/electric energy consumption (1):
  • 1.all power train except pure electric vehicles
NEDC: CO2 emissions Fuel consumption
Combined (4): … g/km …l/100km/m3/100km/kg/100km
Weighted, combined (4) … g/km … l/100km/m3/100km/kg/100km
  • Deviation factor (if applicable): …
  • Verification factor (if applicable) (‘0’ or ‘1’): …
  • 2.NEDC: pure electric vehicles and OVC hybrid electric vehicles
  • Electric energy consumption (weighted, combined) (4)… Wh/km
  • 4.All power trains, except pure electric vehicle, under Regulation (EU) 2017/1151 (if applicable)
WLTP: CO2 emissions Fuel consumption
Combined (4) … g/km … l/100km/m3/100km/kg/100km (4)
Weighted, combined (4) … g/km … l/100km
  • 5.Pure electric vehicles and OVC hybrid electric vehicles, under Regulation (EU) 2017/1151 (if applicable)
  • 5.1.Pure electric vehicles
  • Electric energy consumption: … Wh/km
  • 5.2.OVC hybrid electric vehicles
  • Electric energy consumption (ECAC,weighted): … Wh/km
  • 49.1.Cryptographic hash of the manufacturer’s records file (119): ..................................................................................
  • 49.2.Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
  • 49.3.Vocational vehicle: (yes/no) (4) (72) (170)
  • 49.4.Cryptographic hash of the customer information file: ............................................................................ (120) (121)
  • 49.5.Specific CO2 emissions: ... gCO2/tkm (4) (171)
  • 49.6.Average payload value: … t’ (4) (172)
  • 49.7.Vehicle subgroup/group (4) (176): …

Miscellaneous

  • 50.Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (4):
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks: …
  • 53.Additional information (mileage (118), …)
Category N3

General construction characteristics

  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: …
  • 2.Steered axles (number, position): …
  • 3.Powered axles (number, position, interconnection): …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (4) (8)

Main dimensions

  • 4.Wheelbase (111): … mm
  • 4.1.Axle spacing: 1-2: … mm 2-3: … mm 3-4: … mm
  • 5.Length: … mm
  • 5.2.Elongated cab complying with Article 9a of Directive 96/53/EC: yes/no (4)
  • 5.3.vehicle equipped with aerodynamic device or equipment on the front/rear/not equipped (4)
  • 6.Width: … mm
  • 7.Height: … mm
  • 8.Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
  • 9.Distance between the front end of the vehicle and the centre of the coupling device: … mm
  • 11.Length of the loading area: … mm

Masses

  • 13.2.Actual mass of the vehicle: … kg
  • 13.3.Additional mass for alternative propulsion: … kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.3.Technically permissible mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 17.Intended registration/in service maximum permissible masses in national traffic (4) (166)
  • 17.1.Intended registration/in service maximum permissible laden mass: … kg
  • 17.2.Intended registration/in service maximum permissible laden mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.3.Intended registration/in service maximum permissible laden mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.4.Intended registration/in service maximum permissible mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.2.Semi-trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static vertical mass at the coupling point: … kg

Power plant

  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC -HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual Fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum net power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …

Maximum speed

  • 29.Maximum speed: … km/h

Axles and suspension

  • 31.Position of lift axle(s): …
  • 32.Position of loadable axle(s): …
  • 33.Drive axle(s) fitted with air suspension or equivalent: yes/no (4)
  • 35.Fitted tyre/wheel combination (160): …

Brakes

  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)
  • 37.Pressure in feed line for trailer braking system: … kPa

Bodywork

  • 38.Code for bodywork (113): …
  • 40.Colour of vehicle (114): …
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …

Coupling device

  • 44.Approval number or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …

Environmental performances

  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min-1
  • Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro … or other legislation: …
  • 48.Exhaust emissions  () () ():
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 49.1.Cryptographic hash of the manufacturer’s records file (119): ..................................................................................
  • 49.2.Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
  • 49.3.Vocational vehicle: (yes/no) (4) (72) (170)
  • 49.4.Cryptographic hash of the customer information file: ............................................................................ (120)
  • 49.5.Specific CO2 emissions: ... gCO2/tkm (4) (171)
  • 49.6.Average payload value: … t’ (4) (172)
  • 49.7.Vehicle subgroup/group (4) (176): …

Miscellaneous

  • 50.Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (4):
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks: …
  • 53.Additional information (mileage (118), …)
Categories O1/O2

General construction characteristics

  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: …

Main dimensions

  • 4.Wheelbase (157) (174): … mm

4.1.   Axle spacing:
0-1: … mm
1-2: … mm
2-3: … mm
3-4: … mm
  • 5.Length: … mm
  • 6.Width: … mm
  • 7.Height: … mm
  • 10.Distance between the centre of the coupling device and the rear end of the vehicle: … mm
  • 11.Length of the loading area: … mm

Masses

  • 13.2.Actual mass of the vehicle: … kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
1. … kg, 2. … kg, 3. … kg etc.
  • 16.3.Technically permissible mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 19.Technically permissible maximum static vertical mass at the coupling point: … kg

Maximum speed

  • 29.Maximum speed: … km/h

Axles and suspension

  • 30.1.Track of each steered axle: … mm
  • 30.2.Track of all other axles: … mm.
  • 33.Drive axle(s) fitted with air suspension or equivalent: yes/no (4)
  • 35.Fitted tyre/wheel combination (160): …

Brakes

  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)

Bodywork

  • 38.Code for bodywork (113): …

Coupling device

  • 44.Approval number or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …

Miscellaneous

  • 50.Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (4):
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks: …
  • 53.Additional information: …
Categories O3/O4

General construction characteristics

  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: …
  • 2.Steered axles (number, position): …

Main dimensions

  • 4.Wheelbase (157) (174): … mm
  • 4.1.Axle spacing:
0-1: … mm
1-2: … mm
2-3: … mm
3-4: … mm
  • 5.Length: … mm
  • 5.3.Vehicle equipped with aerodynamic device or equipment on the rear/not equipped (4)
  • 6.Width: … mm
  • 7.Height: … mm
  • 10.Distance between the centre of the coupling device and the rear end of the vehicle: … mm
  • 11.Length of the loading area: … mm

Masses

  • 13.2.Actual mass of the vehicle: … kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.3.Technically permissible mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 17.Intended registration/in service maximum permissible masses in national traffic (4) (166)
  • 17.1.Intended registration/in service maximum permissible laden mass: … kg
  • 17.2.Intended registration/in service maximum permissible laden mass on each axle:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.3.Intended registration/in service maximum permissible laden mass on each axle group:
1. … kg, 2. … kg, 3. … kg, etc.
  • 17.4.Intended registration/in service maximum permissible mass of the combination: … kg
  • 19.Technically permissible maximum static vertical mass at the coupling point: … kg

Maximum speed

  • 29.Maximum speed: … km/h

Axles and suspension

  • 31.Position of lift axle(s): …
  • 32.Position of loadable axle(s): …
  • 33.Drive axle(s) fitted with air suspension or equivalent: yes/no (4)
  • 35.Fitted tyre/wheel combination (160): …

Brakes

  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)

Bodywork

  • 38.Code for bodywork (113): …

Coupling device

  • 44.Approval number or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …

Environmental performance

  • 49.1.Cryptographic hash of the manufacturer’s records file: … (177)
  • 49.4.Cryptographic hash of the customer information file: … (178)
  • 49.6.Weighted payload value … t (179)
  • 49.7.Vehicle group …(182)
  • 49.9.Cargo volume …m3(183)
  • 49.10.Volume orientation: yes/no (4) (176)
  • 49.11.Efficiency ratios: … (180)
  • 49.11.1.Efficiency ratio – kilometre based:…
  • 49.11.2.Efficiency ratio – ton-kilometre based:…
  • 49.11.3.Efficiency ratio – m3-kilometre based:…

Miscellaneous

  • 50.Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (4):
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks: …
  • 53.Additional information: …

ANNEX IV

APPROVAL CERTIFICATE NUMBERING SYSTEM

  • 1.Approval certificates shall be numbered in accordance with the method set out in this Annex.
  • 2.The number of the approval certificate for whole-vehicle type-approvals shall consist of four sections and the number of the approval certificate for type-approvals of systems, components, and separate technical units shall consist of five sections, as detailed below. In both cases, the sections shall be separated by an asterisk (‘*’).
  • 2.1 Section 1:(applicable to all approvals): The lower-case letter ‘e’ is followed by the distinguishing number of the Member State issuing the approval:
1 for Germany; 19 for Romania;
2 for France; 20 for Poland;
3 for Italy; 21 for Portugal;
4 for the Netherlands; 23 for Greece;
5 for Sweden; 24 for Ireland;
6 for Belgium; 25 for Croatia;
7 for Hungary; 26 for Slovenia;
8 for the Czech Republic; 27 for Slovakia;
9 for Spain; 29 for Estonia;
11 for the United Kingdom; 32 for Latvia;
12 for Austria; 34 for Bulgaria;
13 for Luxembourg; 36 for Lithuania;
17 for Finland; 49 for Cyprus;
18 for Denmark; 50 for Malta.
  • 2.2 Section 2:(only for an EU type-approval of a system, component or separate technical unit) The number of the Regulation of the European Parliament and of the Council, Directive of the European Parliament and of the Council, Commission Delegated Regulation or Commission Implementing Regulation laying down the applicable requirements. For an EU type-approval of a system, component or separate technical unit, one of the following shall be indicated, as applicable:
  • (a) the number of the applicable Commission Delegated Regulation supplementing Regulation (EU) 2018/858;
  • (b) the number of the Regulation of the European Parliament and of the Council laying down the applicable requirements;
  • (c) the number of the Commission Regulation adopted pursuant to Regulation (EU) 2019/2144 and laying down the applicable requirements. For the purposes of point (c), where a (base) Regulation contains separate annexes with requirements and technical prescriptions to be applied for different subject matters covering vehicle systems, components and separate technical units, the reference in Section 2 shall be followed by a roman numeral denoting the Annex number to that Regulation.
  • 2.3 Section 3:(applicable to all approvals): Either the number of the Regulation of the European Parliament and of the Council, Directive of the European Parliament and of the Council, Commission Delegated Regulation or Commission Implementing Regulation laying down the applicable requirements, or, where amended, of the latest Regulation/Directive amending that Regulation/Directive.
  • For an EU whole-vehicle type-approval in accordance with Regulation (EU) 2018/858, ‘2018/858’ shall be indicated. However:
  • (a) in the case of an EU type-approval of vehicles produced in small series in accordance with Article 41 of Regulation (EU) 2018/858, the letters ‘KS’ in capitals shall replace the first two digits of that Regulation’s number (i.e. ‘KS18/858’);
  • (b) in the case of a national type-approval of vehicles produced in small series in accordance with Article 42 of Regulation (EU) 2018/858, the letters ‘NKS’ in capitals shall replace the first two digits of that Regulation’s number (i.e. ‘NKS18/858’);
  • (c) in the case of an EU individual vehicle approval in accordance with Article 44 of Regulation (EU) 2018/858, the letters ‘IV’ in capitals shall replace the first two digits of that Regulation’s number (i.e. ‘IV18/858’);
  • (d) in the case of a national individual vehicle approval in accordance with Article 45 of Regulation (EU) 2018/858, the letters ‘NIV’ in capitals shall replace the first two digits of that Regulation’s number (i.e. ‘NIV18/858’).
  • Where a Directive or Regulation laying down the applicable requirements, or its amendment, contains different technical prescriptions to be applied from specific dates, section 3 shall be followed by one or more alphabetical characters, as prescribed in the applicable Directive or Regulation to identify against which requirements the approval was granted. Where different vehicle categories are concerned, the character may also refer to a specific vehicle category.
  • 2.4 Section 4:(applicable to all approvals): A five-digit sequential number (with leading zeros as applicable) for an EU whole-vehicle type-approval, EU type-approval of vehicles produced in small series, national type-approval of vehicles produces in small series, a system, component or separate technical unit. The sequence shall start from 00001 for each Regulation that is indicated in section 2 for a type-approval of a system, component or separate technical unit, or in section 3 for a whole-vehicle type-approval.
  • In the case of an EU individual vehicle approval or a national individual vehicle approval, section 4 shall consist of 6 alphanumerical digits. The Member States shall determine the detailed rules for the sequence of the numbers.
  • 2.5 Section 5:(not for EU individual vehicle approvals and national individual vehicle approvals): A two-digit sequential number (with leading zeros if applicable) to denote an extension in accordance with Article 34 of Regulation (EU) 2018/858. The sequence shall start from 00 for each new type-approval certificate. On the vehicle’s statutory plate(s) only, Section 5 shall be omitted.
  • 3.Examples of approval certificate numbers
  • 3.1.Examples of a third type-approval of a system, component or a separate technical unit (with no extension) granted by France:
  • (a) in accordance with Regulation (EC) No 715/2007, and Regulation (EU) 2017/1151 as amended by Regulation (EU) 2018/1832 (Regulation with different application dates through the alphabetical characters reflecting the different vehicle categories in accordance with that Regulation or its amendments): e2715/20072018/1832DG0000300
  • (b) in accordance with Regulation (EC) No 595/2009, and Regulation (EU) No 582/2011 as amended by Regulation (EU) 2018/932 (Regulation with different application dates): e2595/20092018/932D0000300
  • (c) in accordance with Annex XI to Implementing Regulation (EU) 2021/535 (14): e22021/535/XI2021/5350000300
  • (d) in accordance with Implementing Regulation (EU) 2021/646 (122): e22021/6462021/6460000300
  • 3.2.Example of a second extension to the fourth EU whole-vehicle type-approval granted by Ireland in accordance with Regulation (EU) 2018/858:
  • e242018/85800004*02
  • 3.3.Example of an EU type-approval of vehicles produced in small series granted by Luxembourg in accordance with Regulation (EU) 2018/858:
  • e13KS18/85800001*00
  • 3.4.Example of a national type-approval of vehicles produced in small series granted by the Netherlands in accordance with Regulation (EU) 2018/858:
  • e4NKS18/85800001*00
  • 3.5.Example of an EU individual vehicle approval granted by Austria in accordance with Regulation (EU) 2018/858:
  • e12IV18/858ST0001
  • 3.6.Example of a national individual vehicle approval granted by Austria in accordance with Regulation (EU) 2018/858:
  • e12NIV18/858W00001
  • 4.This Annex does not apply to type-approvals granted in accordance with the UN Regulations listed in Annex II to Regulation (EU) 2018/858, as the relevant numbering system is provided for in the respective UN Regulations.

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.