Legalize / European Union / Implementing Regulation

Commission Implementing Regulation (EU) 2020/683 of 15 April 2020 implementing Regulation (EU) 2018/858 of the European Parliament and of the Council with regards to the administrative requirements for the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles

Type Implementing Regulation

Publication 2020-05-26

Last updated 2024-01-01

State In force

Department European Commission, GROW

Source EUR-Lex

articles 9

Reform history JSON API

9.10.7.5.1.Numbers of the component type-approval certificate (s), if available: …

9.10.7.5.2.For materials not approved

9.10.7.5.2.1.Base material(s)/designation: ……/.…..

9.10.7.5.2.2.Composite/single (⁴) material, number of layers (⁴): …

9.10.7.5.2.3.Type of coating (⁴): …

9.10.7.5.2.4.Maximum/minimum thickness: ……/……. Mm

9.10.7.6.Material(s) used for luggage racks

9.10.7.6.1.Number(s) of the component type-approval certificate (s), if available: …

9.10.7.6.2.For materials not approved

9.10.7.6.2.1.Base material(s)/designation: ……/……

9.10.7.6.2.2.Composite/single (⁴) material, number of layers (⁴): …

9.10.7.6.2.3.Type of coating (⁴): …

9.10.7.6.2.4.Maximum/minimum thickness: ……/…… mm

9.10.7.7.Material(s) used for other purposes

9.10.7.7.1.Intended purposes: …

9.10.7.7.2.Number(s) of the component type-approval certificate (s), if available: …

9.10.7.7.3.For materials not approved

9.10.7.7.3.1.Base material(s)/designation: ……/……

9.10.7.7.3.2.Composite/single (⁴) material, number of layers (⁴): …

9.10.7.7.3.3.Type of coating (⁴): …

9.10.7.7.3.4.Maximum/minimum thickness: …./…. Mm

9.10.7.8.Components approved as complete devices (seats, separation walls, luggage racks, etc.)

9.10.7.8.1.Number(s) of the component type-approval certificate (s): …

9.10.7.8.2.For the complete device: seat, separation wall, luggage racks, etc. (⁴)

9.10.8.Gas used as refrigerant in the air-conditioning system: …

9.10.8.1.The air-conditioning system is designed to contain fluorinated greenhouse gases with global warming potential higher than 150: yes/no (⁴)

9.10.8.2.If yes, fill in the following points

9.10.8.2.1.Drawing and brief description of the air-conditioning system, including the reference or part number and material of the leak components;

9.10.8.2.2.Leakage of the air-conditioning system

9.10.8.2.4.Reference or part number and material of the components of the system and information about the test (e.g. test report number, number of the approval certificate, etc.): …

9.10.8.3.Overall leakage in g/year of the entire system: …

9.11. External projections

9.11.1.Photographs of the front, rear and side parts of the vehicle at an angle of 30° to 45° to the vertical longitudinal median plane of the vehicle:

9.11.2.Drawings of the ‘external surface’ to demonstrate compliance with the requirements: …

9.11.3.Drawings of parts of the external surface in accordance with paragraph 6.9.1 to UN Regulation No 26 of the Economic Commission for Europe of the United Nations (UNECE) (⁸⁵): …

9.11.4.Drawing of bumpers: …

9.11.5.Drawing of the floor line: …

9.12. Safety belts and/or other restraint systems

9.12.1.Number and position of safety belts and restraint systems and seats on which they can be used


(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)
		Complete EU type-approval mark	Variant, if applicable	Belt adjustment device for height (indicate yes/no/optional)
First row of seats	L
First row of seats	C
First row of seats	R
Second row of seats (⁸⁶)	L
Second row of seats (⁸⁶)	C
Second row of seats (⁸⁶)	R

9.12.2.Nature and position of supplementary restraint systems (indicate yes/no/optional)


(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)
		Front airbag	Side airbag	Other airbag systems (i.e. knee airbag, etc.)
First row of seats	L
First row of seats	C
First row of seats	R
Second row of seats (⁸⁶)	L
Second row of seats (⁸⁶)	C
Second row of seats (⁸⁶)	R

9.12.3.Number and position of safety belt anchorages and proof of compliance with UN Regulation No 14 (⁸⁷), (i.e. number of the type-approval certificate or test report): …

9.12.4.A brief description of the electrical/electronic components (if any): …

9.12.5.Description of the seat belt reminder system: …

9.13. Safety belt anchorages

9.13.1.Photographs and/or drawings of the bodywork showing the position and dimensions of the actual and the effective anchorages including the R-points: …

9.13.2.Drawings of the belt anchorages and parts of the vehicle structure where they are attached (with the material indication): …

9.13.3.Designation of the types (⁸⁸) of safety belt authorised for fitting to the anchorages with which the vehicle is equipped

			Anchorage location	Anchorage location
			Vehicle structure	Seat structure
First row of seats	First row of seats	First row of seats
Right-hand seat	Lower anchorages	outboard inboard
Right-hand seat	Upper anchorages
Centre seat	Lower anchorages	right left
Centre seat	Upper anchorages
Left-hand seat	Lower anchorages	outboard inboard
Left-hand seat	Upper anchorages
Second row of seats (⁸⁶)	Second row of seats (⁸⁶)	Second row of seats (⁸⁶)
Right-hand seat	Lower anchorages	outboard inboard
Right-hand seat	Upper anchorages
Centre seat	Lower anchorages	right left
Centre seat	Upper anchorages
Left-hand seat	Lower anchorages	outboard inboard
Left-hand seat	Upper anchorages

9.13.4.Description of a particular type of safety belt where an anchorage is located in the seat backrest or incorporates an energy dissipating device: …

9.14. Spaces for mounting front and rear registration plates (give ranges where appropriate, drawings may be used where applicable): …

9.14.1.Height above road surface, lower and upper edges: ...

9.14.2.Lateral location, left and right edges: ...

9.14.3.Number of standard registration plate spaces: ...

9.14.4.Number of optional or alternative registration plate spaces: ...

9.14.5.Dimensions (length × width): …

9.14.5.1.Front registration plate space: ...

9.14.5.2.Rear registration plate space: ...

9.14.5.3.Second rear registration plate space (in case of vehicles of category O2, O3 and O4): ...

9.14.5.4.Optional or alternative registration plate spaces: ...

9.14.6.Inclinations of the plates to the vertical: ...

9.14.7.Angles of visibility from upper, lower, left and right edges: ...

9.15. Rear under-run protection

9.15.0.Presence: yes/no/incomplete (⁴)

9.15.1.Drawing of the vehicle parts relevant to the rear under-run protection, i.e. drawing of the vehicle and/or chassis with position and mounting of the widest rear axle, drawing of the mounting and/or fitting of the rear under-run protection. If the under-run protection is not a special device, the drawing shall clearly show that the required dimensions are met: …

9.15.2.In case of a special device, full description and/or drawing of the rear under-run protection (including mountings and fittings), or, if approved as separate technical unit, number of the type-approval certificate: …

9.16. Wheel guards

9.16.1.Brief description of the vehicle with regard to its wheel guards: …

9.16.2.Detailed drawings of the wheel guards and their position on the vehicle showing the dimensions specified in Implementing Regulation (EU) 2021/535, Annex V, Part 2, Figure 1 and taking account of the extremes of tyre/wheel combinations: …

9.17. Statutory plates

9.17.1.Photographs and/or drawings of the locations of the statutory plates and inscriptions and of the vehicle identification number: …

9.17.2.Photographs and/or drawings of the statutory plate and inscriptions (completed example with dimensions): …

9.17.3.Photographs and/or drawings of the vehicle identification number (completed example with dimensions): …

9.17.4.Manufacturer’s declaration of compliance with the requirements set out in Implementing Regulation (EU) 2021/535, Annex II, Part 2: ...

9.17.4.1.The meaning of characters in the vehicle descriptor section (VDS) of the vehicle identification number (VIN) and, if applicable, the vehicle indicator section (VIS) thereof, to comply with the requirements of Section 5.3. of ISO Standard 3779:2009 shall be explained: ...

9.17.4.2.If characters in the vehicle descriptor second section are used to comply with the requirements of section 5.4 of ISO Standard 3779:2009 (i.e. model year) these characters shall be indicated: …

9.17.4.3.Statutory plate for vehicle built-in multi stage: yes/no (⁴)

9.18. Radio interference/electromagnetic compatibility

9.18.1.Description and drawings/photographs of the shapes and constituent materials of the part of the body forming the engine compartment and the part of the passenger compartment nearest to it: …

9.18.2.Drawings or photographs of the position of metal components housed in the engine compartment (e.g. heating appliances, spare wheel, air filter, steering mechanism, etc.): …

9.18.3.Table and drawing of radio-interference control equipment: …

9.18.4.Particulars of the nominal value of the direct current resistance, and, in the case of resistive ignition cables, of their nominal resistance per metre: …

9.19. Lateral protection

9.19.0.Presence: yes/no/incomplete (⁴)

9.19.1.Drawing of the vehicle parts relevant to the lateral protection, i.e. drawing of the vehicle and/or chassis with position and mounting of the axle(s), drawing of the mountings and/or the fittings of lateral protection device(s). If the lateral protection is achieved without lateral protection device(s) the drawing shall clearly show that the required dimensions are met: …

9.19.2.In the case of lateral protection device(s), full description and/or drawing of such device(s) (including mountings and fittings) or its/their number(s) of the component type-approval certificate(s): …

9.20. Spray-suppression system

9.20.0.Presence: yes/no/incomplete (⁴)

9.20.1.Brief description of the vehicle with regard to its spray-suppression system and the constituent components: …

9.20.2.Detailed drawings of the spray suppression system and its position on the vehicle showing the dimensions specified in the figures in the Appendix to Implementing Regulation (EU) 2021/535, Annex VIII, Part 2 and taking account of the extremes of tyre/wheel combinations: ...

9.20.3.Number(s) of the type-approval certificate(s) of spray-suppression device(s), if available: …

9.21. Side-impact resistance

9.21.1.A detailed description, including photographs and/or drawings, of the vehicle with respect to the structure, the dimensions, the lines and the constituent materials of the side walls of the passenger compartment (exterior and interior), including specific details of the protection system, where applicable: …

9.22. Front under-run protection

9.22.0.Presence: yes/no/incomplete (⁴)

9.22.1.Drawing of the vehicle parts relevant to the front under-run protection, i.e. drawing of the vehicle and/or chassis with position and mounting and/or fitting of the front under-run protection. If the under-run protection is no special device, the drawing shall clearly show that the required dimensions are met: …

9.22.2.In the case of special device, full description and/or drawing of the front under-run protection (including mountings and fittings), or, if approved as a separate technical unit, number of the type-approval certificate: …

9.23. Pedestrian protection

9.23.1.A detailed description, including photographs and/or drawings, of the vehicle with respect to the structure, the dimensions, the relevant reference lines and the constituent materials of the frontal part of the vehicle (interior and exterior), including detail of any active protection system installed.

9.24. Frontal protection systems

9.24.1.General arrangement (drawings or photographs) indicating the position and attachment of the frontal protection systems:

9.24.2.Drawings and/or photographs, where relevant, of air intake grilles, radiator grille, decorative trim, badges, emblems and recesses and any other external projections and parts of the exterior surface which can be regarded as critical (e.g. lighting equipment). If the parts listed in the first sentence are not critical, for documentation purposes they may be replaced by photographs, accompanied if necessary by dimensional details and/or text:

9.24.3.Complete details of fittings required and full instructions, including torque requirements, for fitting:

9.24.4.Drawing of bumpers:

9.24.5.Drawing of the floor line at the vehicle front end:

9.25. Aerodynamic device or equipment

9.25.1.Detailed technical description (including photographs and drawings, as well as description of the materials) of the vehicle parts referred to in Implementing Regulation (EU) 2021/535, Annex XIII, Part 2, Section D, point 1.4: ...

9.26. Aerodynamic device or equipment on the front of the vehicle

9.26.1.Vehicle equipped with aerodynamic device or equipment on the front: yes/no (⁴)

9.26.2.Number of the type-approval certificate of the aerodynamic device or equipment, if available: …

Or, if not available provide the information below:

9.26.3.Detailed description (including photographs or drawings) of the aerodynamic device or equipment (NB: taken over from the addendum to the type-approval certificate)

9.26.3.1.Construction and materials: …

9.26.3.2.Locking and adjustment system: …

9.26.3.3.Attachment and mounting to the vehicle: …

9.27. Aerodynamic device or equipment on the rear of the vehicle

9.27.1.Vehicle equipped with aerodynamic device or equipment on the rear: yes/no (⁴)

9.27.2.Number of the type-approval certificate of the aerodynamic device or equipment, if available: …

Or, if not available provide the information below:

9.27.3.Detailed description (including photographs or drawings) of the aerodynamic device or equipment (NB: taken over from the addendum to the TA certificate)

9.27.3.1.Construction and materials: …

9.27.3.2.Locking and adjustment system: …

9.27.3.3.Attachment and mounting to the vehicle: …

10. LIGHTING AND LIGHT SIGNALLING DEVICES

10.1.Table of all devices: number, make, model, type-approval mark, maximum intensity of main-beam headlamps, colour, tell-tale: …

10.1.1.Emergency stop signal (ESS): yes/no (⁴)

10.2.Drawing of the position of lighting and light signalling devices: …

10.3.For every lamp and reflector specified in UN Regulation No 48 (⁹²) of the Economic Commission for Europe of the United Nations (UNECE) supply the following information (in writing and/or by diagram)

10.3.1.Drawing showing the extent of the illuminating surface: …

10.3.2.Method used for the definition of the apparent surface in accordance with paragraph 2.10 of UN Regulation No 48: …

10.3.3.Axis of reference and centre of reference: …

10.3.4.Method of operation of concealable lamps: …

10.3.5.Any specific mounting and wiring provisions: …

10.4.Dipped beam lamps: normal orientation in accordance to paragraph 6.2.6.1 of UN Regulation No 48:

10.4.1.Value of initial adjustment: …

10.4.2.Location of indication: …


10.4.3.	Description/drawing (⁴) and type of headlamp levelling device (e.g. automatic, stepwise manually adjustable, continuously manually adjustable):	Applicable only for vehicles with headlamp levelling device
10.4.4.	Control device:	Applicable only for vehicles with headlamp levelling device
10.4.5.	Reference marks:	Applicable only for vehicles with headlamp levelling device
10.4.6.	Marks assigned for loading conditions:	Applicable only for vehicles with headlamp levelling device

10.5.A brief description of electrical/electronic components other than lamps (if any): …

11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-TRAILERS

11.1.Class and type of the coupling device(s) fitted or to be fitted: …

11.2.Characteristics D, U, S and V of the coupling device(s) fitted or minimal characteristics D, U, S and V of the coupling device(s) to be fitted: …… daN

11.3.Instructions for attachment of the coupling type to the vehicle and photographs or drawings of the fixing points at the vehicle as stated by the manufacturer; additional information, if the use of the coupling type is restricted to certain variants or versions of the vehicle type: …

11.4.Information of the fitting of special towing brackets or mounting plates: …

11.5.Number(s) of the type-approval certificate(s): …

12. MISCELLANEOUS

12.1.Audible warning device(s)

12.1.1.Location, method of affixing, placement and orientation of the device(s), with dimensions: …

12.1.2.Number of device(s): …

12.1.3.Number(s) of the type-approval certificate (s): …

12.1.4.Electrical/pneumatic (⁴) circuit diagram: …

12.1.5.Rated voltage or pressure: …

12.1.6.Drawing of the mounting device: …

12.2.Devices to prevent unauthorised use of the vehicle

12.2.1.Protective device

12.2.1.1.A detailed description of the vehicle type with regard to the arrangement and design of the control or of the unit on which the protective device acts: …

12.2.1.2.Drawings of the protective device and of its mounting on the vehicle: …

12.2.1.3.A technical description of the device: …

12.2.1.4.Details of the lock combinations used: …

12.2.1.5.Vehicle immobiliser

12.2.1.5.1.Number of the type-approval certificate, if available: …

12.2.1.5.2.For immobilisers not yet approved

12.2.1.5.2.1.A detailed technical description of the vehicle immobiliser and of the measures taken against inadvertent activation: …

12.2.1.5.2.2.The system(s) on which the vehicle immobiliser acts: …

12.2.1.5.2.3.Number of effective interchangeable codes, if applicable: …

12.2.2.Alarm system (if any)

12.2.2.1.Number of the type-approval certificate, if available: …

12.2.2.2.For alarm systems not yet approved

12.2.2.2.1.A detailed description of the alarm system and of the vehicle parts related to the alarm system installed: …

12.2.2.2.2.A list of the main components comprising the alarm system: …

12.2.3.A brief description of the electrical/electronic components (if any): …

12.2.4.Alcohol interlock installation facilitation (AIF)

12.2.4.1.Manufacturer’s declaration of compliance, in accordance with Annex I to Delegated Regulation (EU) 2021/1243(¹²³): …

12.2.4.2.Installation document as regards alcohol interlock installation facilitation

12.3.Towing device(s)

12.3.1.Front: Hook/eye/other (⁴)

12.3.2.Rear: Hook/eye/other/none (⁴)

12.3.3.Drawing or photograph of the chassis/area of the vehicle body showing the position, construction and mounting of the towing device(s): …

12.4.Details of any non-engine related devices designed to influence fuel consumption (if not covered by other items): …

12.5.Details of any non-engine related devices designed to reduce noise (if not covered by other items): …

12.6.Speed limitation devices

12.6.1.Manufacturer(s): …

12.6.2.Type(s): …

12.6.3.Number(s) of the type-approval certificate (s), if available: …

12.6.4.Speed or range of speeds at which the speed limitation may be set: …… km/h

12.6.5.Intelligent speed assistance (ISA) system

12.6.5.1.Presence: yes/no (⁴)

12.6.5.2.Speed limit information function (SLIF)

12.6.5.2.1.Detailed description of the SLIF interface: ...

12.6.5.2.2.Perceived speed limit determination methodology and technology: ...

12.6.5.3.Speed limit warning function (SLWF)

12.6.5.3.1.Detailed description of the SLWF feedback mechanisms: ...

12.6.5.3.2.Detailed description of the SLWF visual warning, if applicable: ...

12.6.5.4.Detailed description of the speed control function (SCF): ...

12.6.5.5.Type-approval number of the ISA system as separate technical unit, if applicable: ...

12.7.Table of installation and use of RF transmitters in the vehicle(s), if applicable: …

Frequency bands (Hz)	Maximum output power (W)	Antenna position at vehicle, specific conditions for installation and/or use

The applicant for type-approval shall also supply, where appropriate:

Appendix 1

A list containing make and type of all electrical and/or electronic components, type approved during this whole vehicle type-approval, concerned by UN Regulation No 10 (⁹³) of the Economic Commission for Europe of the United Nations (UNECE).

Appendix 2

Schematics or drawing of the general arrangement of electrical and/or electronic components, type approved during this whole vehicle type-approval, concerned by UN Regulation No 10 and the general wiring harness arrangement.

Appendix 3

Description of vehicle chosen to represent the type

Body style:

Left- or right-hand drive (⁴)

Wheelbase:

Appendix 4

Relevant test report(s) supplied by the manufacturer or approved/recognised laboratories for the purpose of drawing up the type-approval certificate

12.7.1.Vehicle equipped with a 24 GHz short-range radar equipment: yes/no (⁴)

12.8.eCall system

12.8.1.Presence: yes/no (⁴)

12.8.2.Technical description and drawings of the device or type-approval certificate number(s): …

12.9.Acoustic Vehicle Alerting System (AVAS)

12.9.1.The number of the approval certificate issued on the basis of requirements laid down in UN Regulation No 138 (⁹⁴) of the Economic Commission for Europe of the United Nations (UNECE):

12.9.2.Complete reference to the test results of AVAS sound emission levels, measured in accordance with Regulation (EU) No 540/2014 (⁹⁵) of the European Parliament and of the Council.

12.10.Devices or systems with driver selectable modes which influence CO2 emissions and/or criteria emissions and do not have a predominant mode: yes/no (⁴)

12.10.1.Charge sustaining test (if applicable) (state for each device or system)

12.10.1.1.Best case mode: …

12.10.1.2.Worst case mode: …

12.10.2.Charge depleting test (if applicable) (state for each device or system)

12.10.2.1.Best case mode: …

12.10.2.2.Worst case mode: …

12.10.3.Type 1 test (if applicable) (state for each device or system)

12.10.3.1.Best case mode: …

12.10.3.2.Worst case mode: …

12.11.Driver drowsiness and attention warning (DDAW) system

12.11.1.Presence: yes/no (⁴)

12.11.2.Detailed description of the DDAW system: ...

12.11.3.Detailed description of the visual warning of the DDAW system: ...

12.12.Advanced driver distraction warning (ADDW) system

12.12.1.Presence: yes/no (⁴)

12.12.2.Detailed description of the ADDW system: ...

12.12.3.Detailed description of the technical means of distraction avoidance, if applicable: ...

12.13.Blind spot information system (BSIS)

12.13.1.Presence: yes/no (⁴)

12.13.2.Detailed description of the blind spot information system: ...

12.13.3.Type-approval number of the BSIS approved as separate technical unit, if applicable: ...

12.14.Cyber security

12.14.1.General construction characteristics of the vehicle type, including:

(a) the vehicle systems which are relevant to the cybersecurity of the vehicle type;

(b) the components of those systems that are relevant to cybersecurity;

12.14.2.Schematic representation of the vehicle type: …

12.14.3.The number of the certificate of compliance for cybersecurity management system: ...

12.14.4.Documents for the vehicle type to be approved describing the outcome of its risk assessment and the identified risks: ...

12.14.5.Documents for the vehicle type to be approved describing the mitigations that have been implemented on the systems listed, or to the vehicle type, and how they address the stated risks: ...

12.14.6.Documents for the vehicle type to be approved describing protection of dedicated environments for aftermarket software, services, applications or data: ...

12.14.7.Documents for the vehicle type to be approved describing what tests have been used to verify the cybersecurity of the vehicle type and its systems and the outcome of those tests: ...

12.14.8.Description of the consideration of the supply chain with respect to cybersecurity: ...

12.15.Software update

12.15.1.General construction characteristics of the vehicle type: ...

12.15.2.The number of the Certificate of Compliance for Software Update Management System: ...

12.15.3.Security measures

12.15.3.1.Documents for the vehicle type to be approved describing that the update process will be performed securely: …

12.15.3.2.Documents for the vehicle type to be approved describing that the RXSWINs on a vehicle are protected against unauthorized manipulation: …

12.15.4.Software updates over the air

12.15.4.1.Documents for the vehicle type to be approved describing that the update process will be performed safely: …

12.14.4.2.Description of the means of informing vehicle users about an update before and after its execution: …

12.15.5.Manufacturer’s declaration of compliance with the requirements for Software Update Management System: …

12.16.Event data recorder (EDR)

12.16.1.Presence: yes/no (⁴)

12.16.2.Drawing(s) or photographs showing the location and method of attachment of the EDR in the vehicle: ....

12.16.3.Description of the triggering parameter: ...

12.16.4.Description of any other relevant parameter (storing capacity, resistance to high deceleration and mechanical stress of a severe impact, etc.): ...

12.16.5.The data elements and data format stored in the EDR:

Data element	Recording interval/time (relative to time zero)	Data sample rate (samples per second)	Minimum range	Accuracy	Resolution

12.16.6.Instructions for retrieving data from the EDR: ...

12.16.6.1.Description of the method to report information required under Article 4(3)(b) of Commission Delegated Regulation (EU) 2022/545 ([^E0002]): manual/automated (⁴)

12.16.7.Compliance to UN Regulation No 160 technical requirements:

12.16.7.1.UN Regulation No 160 approval number: …

12.16.8.Type-approval number of the EDR approved as separate technical unit, if applicable (to be completed if approval under UN Regulation No 160 is not obtained and referred to in point 12.16.7.1.): ...

12.17.Driver availability monitoring (DAM) system

12.17.1.Presence: yes/no (⁴)

12.17.2.Methods to detect driver availability: …

12.17.3.Written description and/or drawing of the information given to the driver: …

13. SPECIAL PROVISIONS FOR BUSES AND COACHES

13.1.Class of vehicle: Class I/Class II/Class III/Class A/Class B (⁴)

13.1.1.Number of the type-approval certificate of bodywork approved as a separate technical unit: …

13.1.2.Chassis types where the type-approved bodywork can be installed (manufacturer(s), and types of incomplete vehicle): …

13.2. Area for passengers (m²)

13.2.1.Total (S0): …

13.2.2.Upper deck (S0a) (⁴): …

13.2.3.Lower deck (S0b) (⁴): …

13.2.4.For standing passengers (S1): …

13.3. Number of passengers (seated and standing)

13.3.1.Total (N): …

13.3.2.Upper deck (Na) (⁴): …

13.3.3.Lower deck (Nb) (⁴): …

13.4. Number of passengers seated

13.4.1.Total (A): …

13.4.2.Upper deck (Aa) (⁴): …

13.4.3.Lower deck (Ab) (⁴): …

13.4.4.Number of wheelchair user accessible positions: …

13.5.Number of service doors: …

13.6.Number of emergency exits (doors, windows, escape hatches, intercommunication staircase and half staircase): …

13.6.1.Total: …

13.6.2.Upper deck (⁴): …

13.6.3.Lower deck (⁴): …

13.7.Volume of luggage compartments (m³): …

13.8.Area of luggage transportation on the roof (m²): …

13.9.Technical devices facilitating the access to vehicles (e.g. ramp, lifting platform, kneeling system), if fitted: …

13.10.Strength of superstructure

13.10.1.Number of the type-approval certificate, if available: …

13.10.2.For superstructures not yet approved

13.10.2.1.Detailed description of the superstructure of the vehicle type including its dimensions, configuration and constituent materials and its attachment to any chassis frame: …

13.10.2.2.Drawings of the vehicle and those parts of its interior arrangement which have an influence on the strength of the superstructure or on the residual space: …

13.10.2.3.Position of centre of gravity of the vehicle in running order in the longitudinal, transverse and vertical directions: …

13.10.2.4.Maximum distance between the centre lines of the outboard passenger seats: …

13.11.Points of UN Regulation No 66 (⁹⁶) of the Economic Commission for Europe of the United Nations (UN/ECE) to be accomplished and demonstrated for this technical unit: …

13.12.Drawing with dimensions showing the interior arrangement as regards the seating positions, area for standees, wheelchair user(s), luggage compartments including racks and ski-box, if any

14. SPECIAL PROVISIONS FOR VEHICLES INTENDED FOR THE TRANSPORT OF DANGEROUS GOODS

14.1. Electrical equipment according to UN Regulation No 105 (⁹⁷) of the Economic Commission for Europe of the United Nations (UN/ECE)

14.1.1.Protection against overheating of conductors: …

14.1.2.Type of circuit breaker: …

14.1.3.Type and operation of battery master switch: …

14.1.4.Description and location of safety barrier for tachograph: …

14.1.5.Description of permanently energised installations. Indicate the EN standard applied: …

14.1.6.Construction and protection of electrical installation situated to the rear of the driver’s compartment: …

14.2. Prevention of fire risks

14.2.3.Position and heat protection of engine: …

14.2.4.Position and heat protection of the exhaust system: …

14.2.5.Type and design of the endurance braking systems heat protection: …

14.2.6.Type, design and position of combustion heaters: …

15. REUSABILITY, RECYCLABILITY AND RECOVERABILITY

15.1.Version to which the reference vehicle belongs: …

15.2.Mass of the reference vehicle with bodywork or mass of the chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted) without driver: …

15.3.Mass of materials of the reference vehicle: …

15.3.1.Mass of material taken into account at the pre-treatment step (⁹⁸): …

15.3.2.Mass of the material taken into account at the dismantling step (⁹⁸): …

15.3.3.Mass of material taken into account at the non-metallic residue treatment step, considered as recyclable(⁹⁸): …

15.3.4.Mass of material taken into account at the non-metallic residue treatment step, considered as energy recoverable (⁹⁸): …

15.3.5.Materials breakdown (⁹⁸): …

15.3.6.Total mass of materials, which are reusable and/or recyclable: …

15.3.7.Total mass of materials, which are reusable and/or recoverable: …

15.4. Rates

15.4.1.Recyclability rate ‘Rcyc’ (%): …

15.4.2.Recoverability rate ‘Rcov’ (%): …

16. ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATION

16.1.Address of principal website for access to vehicle repair and maintenance information: …

16.1.1.Date from which it is available (no later than 6 months from the date of type-approval): …

16.2.Terms and conditions of access to website: …

16.3.Format of the vehicle repair and maintenance information accessible through website: …

17. AUTOMATED DRIVING SYSTEM (ADS): yes/no (⁴)

17.1.General ADS description: …

17.1.1.Operational Design Domain/Boundary conditions: …

17.1.2.Basic Performance (e.g. Object and Event Detection and Response (OEDR), planning, etc.)): …

17.2.Description of the functions of the ADS:

17.2.1.Main ADS Functions (functional architecture): …

17.2.1.1.Vehicle-internal functions: …

17.2.1.2.Vehicle-external functions (e.g. backend, off-board infrastructure needed, operational measures needed): …

17.3.Overview major components of the ADS

17.3.1.Control units: …

17.3.2.Sensors and installation of the sensors on the vehicle: …

17.3.3.Actuators: …

17.3.4.Maps and positioning: …

17.3.5.Other hardware: …

17.4.ADS layout and schematics

17.4.1.Schematic system layout (e.g. block diagram): …

17.4.2.List and schematic overview of interconnections: …

17.5.Specifications

17.5.1.Specifications in normal operation: …

17.5.2.Specifications in emergency operation: …

17.5.3.Acceptance criteria: …

17.5.4.Demonstration of compliance: …

17.6.Safety concept

17.6.1.Manufacturer statement that the vehicle is free from unreasonable risks: …

17.6.2.Outline of the software architecture (e.g. block diagram): …

17.6.3.Means by which the realization of ADS logic is determined: …

17.6.4.General explanation of the main design provisions built into the ADS so as to generate safe operation under fault conditions, under operational disturbances and the occurrence of conditions that would exceed the ODD: …

17.6.5.General description of failure handling main principles, fall-back level strategy including risk mitigation strategy (minimum risk manoeuvre): …

17.6.6.Conditions for triggering a request to the on-board operator or the remote intervention operator: …

17.6.7.Human machine interaction concept with vehicle occupants, on-board operator and remote intervention operator including protection against simple unauthorized activation/operation and interventions: …

17.7.Verification and validation by the manufacturer of the performance requirements including the OEDR, the HMI, the respect of traffic rules and the conclusion that the system is designed in such a way that it is free from unreasonable risks for the driver, vehicle occupants and other road users: …

17.7.1.Description of the adopted approach: …

17.7.2.Selection of nominal, critical and failure scenarios: …

17.7.3.Description of the used methods and tools (software, laboratory, others) and summary of the credibility assessment: …

17.7.4.Description of the results: …

17.7.5.Uncertainty of the results: …

17.7.6.Interpretation of the results: …

17.7.7.Manufacturer’s declaration:

The manufacturer(s) … affirm(s) that the ADS is free of unreasonable safety risks to the vehicle occupants and other road users.

17.8.ADS data elements

17.8.1.Type of data stored: …

17.8.2.Storage location: …

17.8.3.Recorded occurrences and data elements: …

17.8.4.Means to ensure data security and data protection: …

17.8.5.Means to access the data: …

17.9.Cyber security and software update

17.9.1.Cyber security type-approval number: …

17.9.2.Number of the Certificate of Compliance for cyber security: …

17.9.3.Software update type approval number: …

17.9.4.Number of the Certificate of Compliance for software update: …

17.9.4.1Information on how to read the RxSWIN or software version(s) in case the RxSWIN is not held on the vehicle.

17.9.4.2If applicable, list the relevant parameters that will allow the identification of those vehicles that can be updated with the software represented by the RxSWIN under item 17.9.4.1.

17.10.Operating manual (to be annexed to the information document)

17.10.1.Functional description of the ADS and expected role of the owner, transport service operator, on board operator, remote intervention operator, etc.: …

17.10.2.Technical measures for safe operation (e.g. description of the necessary off board infrastructure, timing, frequency and template of maintenance operations): …

17.10.3.Operational and environment restrictions: …

17.10.4.Operational measures (e.g. if on-board operator or remote intervention operator needed): …

17.10.5.Instructions in case of failures and ADS request (safety measures by vehicle occupants, transport service operator, on board operator and remote intervention operator and public authorities to be taken in the event of malfunctioning of the operation): …

17.11.Means to enable a periodical technical inspection: …

ANNEX II

TEMPLATE FOR AN INFORMATION DOCUMENT FOR THE PURPOSES OF EU WHOLE-VEHICLE STEP-BY-STEP TYPE-APPROVAL

The information documents referred to in Regulation (EU) 2018/858 in respect of a whole-vehicle EU type-approval shall consist only of extracts from, and adhere to the item numbering system of the following list.

Make sure that drawings or pictures show sufficient details distinctly and visibly if printed on size A4.

PART I

A. Categories M and N

0. GENERAL

0.1.Make (trade name of manufacturer): …

0.2.Type: …

0.2.1.Commercial name(s) (if available): …

0.2.2.For multi-stage approved vehicles, type-approval information of the base/previous stage vehicle (list the information for each stage). This can be done with a matrix):

Type: …

Variant(s): …

Version(s): …

Number of the type-approval certificate, including extension number: …

0.2.2.1.Allowed Parameter Values for multistage type approval to use the base vehicle emission values (insert range if applicable) (¹)

Final Vehicle mass (in kg): …

Frontal area for final vehicle (in cm²): …

Rolling resistance (kg/t): …

Cross-sectional area of air entrance of the front grille (in cm²): …

0.2.3.Identifiers (¹):

0.2.3.1.Interpolation family’s identifier: …

0.2.3.2.ATCT family’s identifier: …

0.2.3.3.PEMS family’s identifier: …

0.2.3.4.Roadload family’s identifier

0.2.3.4.1.Roadload family of VH: …

0.2.3.4.2.Roadload family of VL: …

0.2.3.4.3.Roadload families applicable in the interpolation family: …

0.2.3.5.Roadload Matrix family’s identifier: …

0.2.3.6.Periodic regeneration family’s identifier: …

0.2.3.7.Evaporative test family’s identifier: …

0.2.3.8.OBD family’s identifier: …

0.2.3.9.Other family’s identifier: …

0.3.Means of identification of type, if marked on the vehicle (²): …

0.3.1.Location of that marking: …

0.4.Category of vehicle (³): …

0.4.1.Classification(s) according to the dangerous goods which the vehicle is intended to transport: …

0.5.Company name and address of manufacturer: …

0.5.1.For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle: …

0.8.Name(s) and address(es) of assembly plant(s): …

0.9.Name and address of the manufacturer’s representative (if any): …

1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

1.1.Photographs and/or drawings of a representative vehicle: …

1.3.Number of axles: … and wheels (⁵): …

1.3.1.Number and position of axles with twin wheels: …

1.3.2.Number and position of steered axles: …

1.3.3.Powered axles (number, position, interconnection): …

1.4.Chassis (if any) (overall drawing – shortest and longest wheelbase): …

1.6.Position and arrangement of the engine: …

1.8.Hand of drive: left/right (⁴)

1.8.1.Vehicle is equipped to be driven in right/left (⁴) hand traffic

1.9.Specify if the towing vehicle is intended to tow semi-trailers or other trailers and, if the trailer is a semi-, drawbar-, centre-axle- or rigid drawbar trailer: …

1.10.Specify if the vehicle is specially designed for the controlled-temperature carriage of goods: …

1.11.Specify if the vehicle is non-automated/automated/fully automated (⁴) (⁸)

2. MASSES AND DIMENSIONS (⁹) (¹⁰) (¹¹)

(in kg and mm) (Refer to drawing where applicable)

2.1.Wheelbase(s) (fully loaded) (¹²):

2.1.1.Two-axle vehicles: …

2.1.2.Vehicles with three or more axles

2.1.2.1.Axle spacing between consecutive axles going from the foremost to the rearmost axle: …

2.1.2.2.Total axle spacing (¹³): …

2.3.1.Track of each steered axle (¹⁷): …

2.3.2.Track of all other axles (¹⁷): …

2.4.Range of vehicle dimensions (overall)

2.4.1.For chassis without bodywork

2.4.1.1.Length (¹⁸): …

2.4.1.1.1.Maximum permissible length: …

2.4.1.1.2.Minimum permissible length: …

2.4.1.2.Width (²⁰): …

2.4.1.2.1.Maximum permissible width: …

2.4.1.2.2.Minimum permissible width: …

2.4.1.3.Height (in running order) (²¹) (for suspensions adjustable for height, indicate normal running position): …

2.4.1.3.1.Maximum permissible height (²²): …

2.4.2.For chassis with bodywork

2.4.2.1.Length (¹⁸): …

2.4.2.1.1.Length of the loading area: …

2.4.2.1.3.Elongated cab complying with Article 9a of Directive 96/53/EC: yes/no (⁴)

2.4.2.2.Width (²⁰): …

2.4.2.2.1.Thickness of the walls (in the case of vehicles designed for controlled-temperature transport of goods): …

2.4.2.3.Height (in running order) (²¹) (for suspensions adjustable for height, indicate normal running position): …

2.5.Minimum mass on the steering axle(s) for incomplete vehicles: …

2.6.Mass in running order (³⁰)

(a) minimum and maximum for each variant: …

(b) mass of each version (a matrix must be provided): …

2.6.1.Distribution of this mass among the axles and, in the case of a semi-trailer a rigid drawbar trailer or a centre-axle trailer, the mass on the coupling:

(a) minimum and maximum for each variant: …

(b) mass of each version (a matrix must be provided): …

2.6.2.Mass of the optional equipment (see definition in Implementing Regulation (EU) 2021/535, Annex XIII, Part 2, Section A, point 1.4.): …

2.6.4.Additional mass for alternative propulsion: …kg

2.6.5.List of equipment to for alternative propulsion (and indication of the mass of the parts):

2.7.Minimum mass of the completed vehicle as stated by the manufacturer, in the case of an incomplete vehicle: …

2.8.Technically permissible maximum laden mass stated by the manufacturer (³²) (³³): …

2.8.1.Distribution of this mass among the axles and, in the case of a semi-trailer or centre-axle trailer, load on the coupling point (³³): …

2.9.Technically permissible maximum mass on each axle: …

2.10.Technically permissible mass on each group of axles: …

2.11.Technically permissible maximum towable mass of the towing vehicle

in case of:

2.11.1.Drawbar trailer: …

2.11.2.Semi-trailer: …

2.11.3.Centre-axle trailer: …

2.11.4.Rigid drawbar trailer: …

2.11.5.Technically permissible maximum laden mass of the combination (³³): …

2.11.6.Maximum mass of unbraked trailer: …

2.12.Technically permissible maximum mass at the coupling point:

2.12.1.of a towing vehicle: …

2.12.2.of a semi-trailer, a centre-axle trailer or a rigid drawbar trailer: …

2.16. Registration/in service maximum permissible masses, vehicle categories M2, M3, N2, N3, O3 and O4 (optional)

2.16.1.Registration/in service maximum permissible laden mass: …

2.16.2.Registration/in service maximum permissible mass on each axle and, in the case of a semi-trailer or centre-axle trailer, intended load on the coupling point stated by the manufacturer if lower than the technically permissible maximum mass on the coupling point: …

2.16.3.Registration/in service maximum permissible mass on each group of axles: …

2.16.4.Registration/in service maximum permissible towable mass: …

2.16.5.Registration/in service maximum permissible mass of the combination: …

2.17. Vehicle submitted to multi-stage type-approval (only in the case of incomplete or completed vehicles of category N1 within the scope of Regulation (EC) No 715/2007 of the European Parliament and of the Council (⁹⁹): yes/no (⁴)

2.17.1.Mass of the base vehicle in running order: … kg.

2.17.2.Default added mass, calculated in accordance with Section 5 of Annex XII to Commission Regulation (EC) No 692/2008 (¹⁰⁰): … kg.

3. PROPULSION ENERGY CONVERTER (³⁸)

3.1.Manufacturer of the propulsion energy converter(s): …

3.1.1.Manufacturer’s code (as marked on the propulsion energy converter or other means of identification): …

3.1.2.Number of the approval certificate (where appropriate), including fuel identification marking: …

(heavy-duty vehicles only)

3.2.Internal combustion engine

3.2.1.1.Working principle: positive ignition/compression ignition/dual- fuel

Cycle: four stroke/two stroke/rotary (⁴)

3.2.1.1.1.Type of dual-fuel engine: Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (⁴) (⁴²)

3.2.1.1.2.Gas Energy Ratio over the hot part of the WHTC test-cycle: … %

3.2.1.2.Number and arrangement of cylinders: …

3.2.1.3.Engine capacity (⁴⁰)^: …… cm³

3.2.1.6.Normal engine idling speed (⁴¹): …… min^-1

3.2.1.6.2.Idle on diesel: yes/no (⁴) (⁴²)

3.2.1.8.Maximum net power (⁴³): … kW at … min^–1 (manufacturer’s declared value)

3.2.1.11.(Euro VI only) Manufacturer references of the Documentation package required by Articles 5, 7 and 9 of Commission Regulation (EU) No 582/2011 enabling the approval authority to evaluate the emission control strategies and the systems on-board the engine to ensure the correct operation of NOx control measures

3.2.2.1.Diesel/Petrol/LPG/NG or Biomethane/Ethanol (E 85)/Biodiesel/Hydrogen (⁴) (⁴⁵)

3.2.2.2.Heavy duty vehicles Diesel/Petrol/LPG/NG-H/NG-L/NG-HL/Ethanol (ED95)/Ethanol (E85)/LNG/LNG20 (⁴) (⁴⁵)

3.2.2.2.1.(Euro VI only) Fuels compatible with use by the engine declared by the manufacturer in accordance with point 1.1.2 of Annex I to Regulation (EU) No 582/2011 (as applicable)

3.2.2.4.Vehicle fuel type: Mono fuel, Bi fuel, Flex fuel, Dual fuel Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (⁴)

3.2.2.5.Maximum amount of biofuel acceptable in fuel (manufacturer’s declared value): …… % by volume

3.2.3.Fuel tank(s)

3.2.3.1.Service fuel tank(s)

3.2.3.1.1.Number and capacity of each tank: …

3.2.3.2.Reserve fuel tank(s)

3.2.3.2.1.Number and capacity of each tank: …

3.2.4.Fuel feed

3.2.4.1.By carburettor(s): yes/no (⁴)

3.2.4.2.By fuel injection (compression ignition or dual-fuel only): yes/no (⁴)

3.2.4.2.2.Working principle: direct injection/pre-chamber/swirl chamber (⁴)

3.2.4.3.By fuel injection (positive ignition only): yes/no (⁴)

3.2.7.Cooling system: liquid/air (⁴)

3.2.8.Intake system

3.2.8.1.Pressure charger: yes/no (⁴)

3.2.8.2.Intercooler: yes/no (⁴)

3.2.8.3.3.(Euro VI only) Actual Intake system depression at rated engine speed and at 100 % load on the vehicle: kPa

3.2.9.Exhaust system

3.2.9.2.1.(Euro VI only) Description and/or drawing of the elements of the exhaust system that are not part of the engine system

3.2.9.3.1.(Euro VI only) Actual exhaust back pressure at rated engine speed and at 100 % load on the vehicle (compression-ignition engines only): … kPa

3.2.9.4.Type, marking of exhaust silencer(s): …

Where relevant for exterior noise, reducing measures in the engine compartment and on the engine: …

3.2.9.5.Location of the exhaust outlet: …

3.2.9.7.1.(Euro VI only) Acceptable Exhaust system volume: … dm³

3.2.12.Measures taken against air pollution

3.2.12.1.1.(Euro VI only) Device for recycling crankcase gases: yes/no (⁴¹)

If yes, description and drawings:

If no, compliance with Annex V to Regulation (EU) No 582/2011 required

3.2.12.2.Pollution control devices (if not covered by another heading)

3.2.12.2.1.Catalytic converter

3.2.12.2.2.1.Oxygen sensor: yes/no (⁴)

3.2.12.2.3.Air injection: yes/no (⁴)

3.2.12.2.4.Exhaust gas recirculation (EGR): yes/no (⁴)

3.2.12.2.5.Evaporative emissions control system (petrol and ethanol engines only): yes/no (⁴)

3.2.12.2.6.Particulate trap (PT): yes/no (⁴)

3.2.12.2.6.9.Other systems: yes/no (⁴)

3.2.12.2.6.9.1.Description and operation

3.2.12.2.7.On-board-diagnostic (OBD) system: yes/no (⁴)

3.2.12.2.7.0.1.(Euro VI only) Number of OBD engine families within the engine family

3.2.12.2.7.0.2.(Euro VI only) List of the OBD engine families (when applicable)

3.2.12.2.7.0.3.(Euro VI only) Number of the OBD engine family the parent engine/the engine member belongs to:

3.2.12.2.7.0.4.(Euro VI only) Manufacturer references of the OBD-Documentation required by Article 5(4)(c) and Article 9(4) of Regulation (EU) No 582/2011 and specified in Annex X to that Regulation for the purpose of approving the OBD system

3.2.12.2.7.0.5.(Euro VI only) When appropriate, manufacturer reference of the documentation for installing in a vehicle an OBD equipped engine system

3.2.12.2.7.0.6.(Euro VI only) When appropriate, manufacturer reference of the documentation package related to the installation on the vehicle of the OBD system of an approved engine

3.2.12.2.7.0.7.Written description and/or drawing of the MI (⁴⁶): …

3.2.12.2.7.0.8.Written description and/or drawing of the OBD off-board communication interface (⁴⁶)

3.2.12.2.7.6.5.(Euro VI only) OBD Communication protocol standard (⁴⁷):

3.2.12.2.7.7.(Euro VI only) Manufacturer reference of the OBD related information required by of Article 5(4)(d) and Article 9(4) of Regulation (EU) No 582/2011 for the purpose of complying with the provisions on access to vehicle OBD and vehicle Repair and Maintenance Information, or

3.2.12.2.7.7.1.As an alternative to a manufacturer reference provided in point 3.2.12.2.7.7., reference of the attachment to the information document set out in Appendix 4 of Annex I to Regulation (EU) No 582/2011 contains a table according to the given following example:

Component – Fault code – Monitoring strategy – Fault detection criteria – MI activation criteria – Secondary parameters – Preconditioning – Demonstration test

Catalyst – P0420 – Oxygen sensor 1 and 2 signals – Difference between sensor 1 and sensor 2 signals – 3rd cycle – Engine speed, engine load, A/F mode, catalyst temperature – Two Type 1 cycles – Type 1

3.2.12.2.7.8.(EURO VI only) OBD components on-board the vehicle

3.2.12.2.7.8.1.List of OBD components on-board the vehicle

3.2.12.2.7.8.2.Written description and/or drawing of the MI (⁴⁸)

3.2.12.2.7.8.3.Written description and/or drawing of the OBD off-board communication interface (⁴⁸)

3.2.12.2.8.Other system

3.2.12.2.8.1.(Euro VI only) Systems to ensure the correct operation of NOx control measures

3.2.12.2.8.2.Driver inducement system

3.2.12.2.8.2.1.(Euro VI only) Engine with permanent deactivation of the driver inducement, for use by the rescue services or in vehicles specified in point (d) of Article 2(2) to Regulation (EU) 2018/858: yes/no (⁴)

3.2.12.2.8.2.2.Activation of the creep mode ‘disable after restart’/‘disable after fuelling’/‘disable after parking’ (¹¹)

3.2.12.2.8.3.(Euro VI only) Number of OBD engine families within the engine family considered when ensuring the correct operation of NOx control measures

3.2.12.2.8.4.(Euro VI only) List of the OBD engine families (when applicable)

3.2.12.2.8.5.(Euro VI only) Number of the OBD engine family the parent engine/the engine member belongs to

3.2.12.2.8.6.(Euro VI only) Lowest concentration of the active ingredient present in the reagent that does not activate the warning system (CDmin): (% vol.)

3.2.12.2.8.7.(Euro VI only) When appropriate, manufacturer reference of the Documentation for installing in a vehicle the systems to ensure the correct operation of NOx control measures

3.2.12.2.8.8.(Euro VI only) Components on-board the vehicle of the systems ensuring the correct operation of NOx control measures

3.2.12.2.8.8.1.List of components on-board the vehicle of the systems ensuring the correct operation of NOx control measures

3.2.12.2.8.8.2.When appropriate, manufacturer reference of the documentation package related to the installation on the vehicle of the system ensuring the correct operation of NOx control measures of an approved engine

3.2.12.2.8.8.3.Written description and/or drawing of the warning signal (⁴⁸)

3.2.12.2.9.Torque limiter: yes/no (⁴)

3.2.12.2.10.Periodically regenerating system: (provide the information below for each separate unit)

3.2.12.2.10.1.Method or system of regeneration, description and/or drawing: ….

3.2.12.2.11.1.Type and concentration of reagent needed: …

3.2.13.1.Location of the absorption coefficient symbol (compression ignition engines only): …

3.2.15.LPG fuelling system: yes/no (⁴)

3.2.16.NG fuelling system: yes/no (⁴)

3.2.17.8.1.0.1.(Euro VI only) Self adaptive feature? yes/no (⁴)

3.2.17.8.1.0.2.(Euro VI only) Calibration for a specific gas composition NG-H/NG-L/NG-HL/LNG (⁴)

Transformation for a specific gas composition NG-Ht/NG-Lt/NG-HLt (⁴)

3.3.Electric machine (describe information of each type of electric machine separately)

3.3.1.Type (winding, excitation): …

3.3.1.1.1.Maximum net power (⁴³) … kW

(manufacturer’s declared value)

3.3.1.1.2.Maximum 30 minutes power (⁴³) … kW

(manufacturer’s declared value)

3.3.1.2.Operating voltage: …… V

3.3.2.REESS

3.3.2.4.Position: …

3.4.Combinations of propulsion energy converters

3.4.1.Hybrid electric vehicle: yes/no (⁴)

3.4.2.Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging: (⁴)

3.4.3.1.1.Pure electric: yes/no (⁴)

3.5.9.CO2 emissions and fuel consumption certification (for heavy-duty vehicles, as specified in Article 6 of Commission Regulation (EU) 2017/2400)

3.5.9.1.Simulation tool licence number: …

3.5.9.2.Zero emission heavy-duty vehicle: yes/no (⁴) (⁷²) (¹⁶⁹)

3.5.9.3.Vocational vehicle: yes/no (⁴) (⁷²) (¹⁷⁰)

3.5.10.Declared maximum RDE values (if applicable)

Complete RDE trip: NOx: ..., Particles (number): ...

Urban RDE trip: NOx: ..., Particles (number): ...

3.6.5.Lubricant temperature

Minimum: …… K

Maximum: …… K

4. TRANSMISSION(⁷⁶)

4.2.Type (mechanical, hydraulic, electric, etc.): …

4.5.Gearbox

4.5.1.Type: Manual/Automatic/CVT(continuously variable transmission)/Fixed ratio/Automised/Other/Wheel hub (⁴)

4.6.Gear ratios

Gear	Internal gearbox ratios (ratios of engine to gearbox output shaft revolutions)	Final drive ratio(s) (ratio of gearbox output shaft to driven wheel revolutions)	Total gear ratios
Maximum for CVT
1
2
3
…
Minimum for CVT Reverse

4.7.Maximum vehicle design speed (in km/h) (⁷⁷): …

4.9.Tachograph: yes/no (⁴)

4.9.1.Approval mark: …

4.11.Gear shift indicator (GSI)

4.11.1.Acoustic indication available yes/no (⁴)

If yes, description of sound and sound level at the driver’s ear in dB(A). (Acoustic indication always switchable on/off)

4.11.2.Information as referred to in Implementing Regulation (EU) 2021/535, Annex IX, Part 2, point 7.6. (manufacturer’s declared value):

5. AXLES

5.1.Description of each axle: …

5.2.Make: …

5.3.Type: …

5.4.Position of retractable axle(s): …

5.5.Position of loadable axle(s): …

6. SUSPENSION

6.2.Type and design of the suspension of each axle or group of axles or wheel: …

6.2.1.Level adjustment: yes/no/optional (⁴)

6.2.3.Air-suspension for driving axle(s): yes/no (⁴)

6.2.3.1.Suspension of driving axle equivalent to air-suspension: yes/no (⁴)

6.2.4.Air-suspension for non-driving axle(s): yes/no (⁴)

6.2.4.1.Suspension of non-driving axle(s) equivalent to air-suspension: yes/no (⁴)

6.6.1.Tyre/wheel combination(s)

6.6.1.1.Axles

6.6.1.1.1.Axle 1: …

6.6.1.1.1.1. Tyre size designation	6.6.1.1.1.2. Load-capacity index	6.6.1.1.1.3. Speed category symbol(⁸⁰)	6.6.1.1.1.4. Wheel rim size(s)	6.6.1.1.1.5. Wheel off-set(s)	6.6.1.1.1.6. Rolling resistance coefficient (RRC)

6.6.1.1.2.Axle 2: …

6.6.1.1.2.1. Tyre size designation	6.6.1.1.2.2. Load-capacity index	6.6.1.1.2.3. Speed category symbol(⁸⁰)	6.6.1.1.2.4. Wheel rim size(s)	6.6.1.1.2.5. Wheel off-set(s)	6.6.1.1.2.6. Rolling resistance coefficient (RRC)

etc.

6.6.1.2.Spare wheel, if any: …

6.6.2.Upper and lower limits of rolling radii

6.6.2.1.Axle 1: …

6.6.2.2.Axle 2: …

etc.

6.7.Tyre pressure monitoring system (TPMS)

6.7.1.Presence: yes/no (⁴)

7. STEERING

7.2.Transmission and control

7.2.1.Type of steering transmission (specify for front and rear, if applicable): …

7.2.2.Linkage to wheels (including other than mechanical means; specify for front and rear, if applicable): …

7.2.3.Method of assistance, if any: …

7.4.Emergency lane-keeping system (ELKS)

7.4.1.Presence: yes/no (⁴)

7.5.Lane Departure Warning System (LDWS)

7.5.1.Presence: yes/no (⁴)

7.6.Corrective Directional Control Function (CDCF)

7.6.1.Presence: yes/no (⁴)

8. BRAKES

8.5.Anti-lock braking system: yes/no/optional (⁴)

8.9.Brief description of the braking system according to paragraph 12 of Annex 2 to UN Regulation No 13: …

8.11.Particulars of the type(s) of endurance braking system(s): …

8.12.Advanced emergency braking system (AEBS)

8.12.1.Presence: yes/no (⁴)

9. BODYWORK

9.1.Type of bodywork using the codes defined in Part C of Annex I to Regulation (EU) 2018/858 or in case of a special purpose vehicle the codes defined in point 5 to Part A of that Annex: …

9.3.Occupant doors, latches and hinges

9.3.1.Door configuration and number of doors: …

9.9.Devices for indirect vision

9.9.1.Rear-view mirrors, stating, for each rear-view mirror:

9.9.1.1.Make: …

9.9.1.2.Type-approval mark: …

9.9.1.3.Variant: …

9.9.1.6.Optional equipment which may affect the rearward field of vision: …

9.9.2.Devices for indirect vision other than mirrors: …

9.9.2.1.Type and description of the device: …

9.10.Interior arrangement

9.10.3.Seats

9.10.3.1.Number of seating positions (⁸³): …

9.10.3.1.1.Location and arrangement: …

9.10.3.2.Seat(s) designated for use only when the vehicle is stationary: …

9.10.8.Gas used as refrigerant in the air-conditioning system: …

9.10.8.1.The air-conditioning system is designed to contain fluorinated greenhouse gases with a global warming potential higher than 150: yes/no (⁴)

9.12.2.Nature and position of supplementary restraint systems (indicate yes/no/optional):


(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)	(L = left-hand side, R = right-hand side, C = centre)
		Front airbag	Side airbag	Belt pre-loading device
First row of seats	L
First row of seats	C
First row of seats	R
Second row of seats(⁸⁶)	L
Second row of seats(⁸⁶)	C
Second row of seats(⁸⁶)	R

9.17.Statutory plates

9.17.1.Photographs and/or drawings of the locations of the statutory plates and inscriptions and of the vehicle identification number: …

9.17.2.Photographs and/or drawings of the statutory plate and inscriptions (completed example with dimensions): …

9.17.3.Photographs and/or drawings of the vehicle identification number (completed example with dimensions): …

9.17.4.1.The meaning of characters in the vehicle descriptor section (VDS) of the vehicle identification number (VIN) and, if applicable, the vehicle indicator section (VIS) thereof, to comply with the requirements of Section 5.3. of ISO Standard 3779:2009 shall be explained: …

9.17.4.2.If characters in the vehicle descriptor second section are used to comply with the requirements of section 5.4 of ISO Standard 3779:2009 these characters shall be indicated: …

9.22.Front under-run protection

9.22.0.Presence: yes/no/incomplete (⁴)

9.23.Pedestrian protection

9.23.1.A detailed description, including photographs and/or drawings, of the vehicle with respect to the structure, the dimensions, the relevant reference lines and the constituent materials of the frontal part of the vehicle (interior and exterior), including detail of any active protection system installed

9.24.Frontal protection systems

9.24.1.General arrangement (drawings or photographs) indicating the position and attachment of the frontal protection systems:

9.24.3.Complete details of fittings required and full instructions, including torque requirements, for fitting:

11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-TRAILERS

11.1.Class and type of the coupling device(s) fitted or to be fitted: …

11.3.Instructions for attachment of the coupling type to the vehicle and photographs or drawings of the fixing points at the vehicle as stated by the manufacturer; additional information, if the use of the coupling type is restricted to certain variants or versions of the vehicle type: …

11.4.Information of the fitting of special towing brackets or mounting plates: …

11.5.Number(s) of the type-approval certificate(s): …

12. MISCELLANEOUS

12.2.4.Alcohol interlock installation facilitation (AIF)

12.2.4.1.Manufacturer’s declaration of compliance, in accordance with Annex I to Commission Delegated Regulation (EU) 2021/1243(¹²³): …

12.6.5.Intelligent speed assistance system (ISA)

12.6.5.1.Presence: yes/no (⁴)

12.7.1.Vehicle equipped with a 24 GHz short-range radar equipment: yes/no (⁴)

12.8.eCall system

12.8.1.Presence: yes/no (⁴)

12.9.Acoustic Vehicle Alerting System (AVAS)

12.9.1.The number of the approval certificate issued on the basis of requirements laid down in UN Regulation No 138 of the Economic Commission for Europe of the United Nations (UNECE):

12.9.2.Complete reference to the test results of AVAS sound emission levels, measured in accordance with Regulation (EU) No 540/2014 of the European Parliament and of the Council.

12.11.Driver drowsiness and attention warning (DDAW) system

12.11.1.Presence: yes/no (⁴)

12.12.Advanced driver distraction warning (ADDW) system

12.12.1.Presence: yes/no (⁴)

12.13.Blind spot information system (BSIS)

12.13.1.Presence: yes/no (⁴)

12.16.Event data recorder (EDR)

12.16.1.Presence: yes/no (⁴)

12.17.Driver availability monitoring (DAM) system

12.17.1.Presence: yes/no (⁴)

13. SPECIAL PROVISIONS FOR BUSES AND COACHES

13.1.Class of vehicle: Class I/Class II/Class III/Class A/Class B (⁴)

13.1.2.Chassis types where the type-approved bodywork can be installed (manufacturer(s), and type of incomplete vehicle(s): …

13.3.Number of passengers (seated and standing)

13.3.1.Total (N): …

13.3.2.Upper deck (Na) (⁴): …

13.3.3.Lower deck (Nb) (⁴): …

13.4.Number of passengers (seated)

13.4.1.Total (A): …

13.4.2.Upper deck (Aa) (⁴): …

13.4.3.Lower deck (Ab) (⁴): …

13.4.4.Number of wheelchair user accessible position: …

16. ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATION

16.1.Address of principal website for access to vehicle repair and maintenance information: …

17. AUTOMATED DRIVING SYSTEM (ADS): yes/no (⁴)

B. Category O

0. GENERAL

0.1.Make (trade name of manufacturer): …

0.2.Type: …

0.2.1.Commercial name(s) (if available): …

0.3.Means of identification of type, if marked on the vehicle (²): …

0.3.1.Location of that marking: …

0.4.Category of vehicle (³): …

0.4.1.Classification(s) according to the dangerous goods which the vehicle is intended to transport: …

0.5.Company name and address of manufacturer: …

0.8.Name(s) and address(es) of assembly plant(s): …

0.9.Name and address of the manufacturer’s representative (if any): …

1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

1.1.Photographs and/or drawings of a representative vehicle: …

1.3.Number of axles: … and wheels (⁵): …

1.3.1.Number and position of axles with twin wheels: …

1.3.2.Number and position of steered axles: …

1.4.Chassis (if any) (overall drawing): …

1.9.Specify if the towing vehicle is intended to tow semi-trailers or other trailers and, if the trailer is a semi-, drawbar-, centre-axle- or rigid drawbar trailer: …

1.10.Specify if the vehicle is specially designed for the controlled-temperature carriage of goods: …

2. MASSES AND DIMENSIONS (⁹) (¹⁰) (¹¹)

(in kg and mm) (Refer to drawing where applicable)

2.1.Wheelbase(s) (fully loaded) (¹²):

2.1.1.Two-axle vehicles: …

2.1.2.Vehicles with three or more axles

2.1.2.1.Axle spacing between consecutive axles going from the foremost to the rearmost axle: …

2.1.2.2.Total axle spacing (¹³): …

2.3.1.Track of each steered axle (¹⁷): …

2.3.2.Track of all other axles (¹⁷): …

2.4.Range of vehicle dimensions (overall)

2.4.1.For chassis without bodywork

2.4.1.1.Length (¹⁸): …

2.4.1.1.1.Maximum permissible length: …

2.4.1.1.2.Minimum permissible length: …

2.4.1.1.3.In the case of trailers, maximum permissible drawbar length (¹⁹): …

2.4.1.2.Width (²⁰): …

2.4.1.2.1.Maximum permissible width: …

2.4.1.2.2.Minimum permissible width: …

2.4.2.For chassis with bodywork

2.4.2.1.Length (¹⁸): …

2.4.2.1.1.Length of the loading area: …

2.4.2.1.2.In the case of trailers, maximum permissible drawbar length (¹⁹): …

2.4.2.2.Width (²⁰): …

2.4.2.2.1.Thickness of the walls (in the case of vehicles designed for controlled-temperature transport of goods): …

2.4.2.3.Height (in running order) (²¹) (for suspension adjustable for height, indicate normal running position): …

2.6.Mass in running order (³⁰)

(a) minimum and maximum for each variant: …

(b) mass of each version (a matrix must be provided): …

2.6.1.Distribution of this mass among the axles and, in the case of a semi-trailer a rigid drawbar trailer or a centre-axle trailer, the mass on the coupling: …

(a) minimum and maximum for each variant: …

(b) mass of each version (a matrix must be provided): …

2.6.2.Mass of the optional equipment (see definition in Implementing Regulation (EU) 2021/535, Annex XIII, Part 2, Section A, point 1.4.): …

2.7.Minimum mass of the completed vehicle as stated by the manufacturer, in the case of an incomplete vehicle: …

2.8.Technically permissible maximum laden mass stated by the manufacturer (³²) (³³): …

2.8.1.Distribution of this mass among the axles, and in the case of a semi-trailer or centre-axle trailer, load on the coupling point (³³): …

2.9.Technically permissible maximum mass on each axle: …

2.10.Technically permissible mass on each group of axles: …

2.12.Technically permissible maximum mass at the coupling point:

2.12.2.Of a semi-trailer, a centre-axle trailer or a rigid drawbar trailer: …

2.16.Registration/in service maximum permissible masses (optional)

2.16.1.Registration/in service maximum permissible laden mass: …

2.16.2.Registration/in service maximum permissible mass on each axle and, in the case of a semi-trailer or centre-axle trailer, intended load on the coupling point stated by the manufacturer if lower than the technically permissible maximum mass on the coupling point: …

2.16.3.Registration/in service maximum permissible mass on each group of axles: …

2.16.4.Intended registration/in service maximum permissible towable mass (several entries possible for each technical configuration (¹⁰¹)): …

3.5.11.Environmental performance assessment (of heavy-duty trailers, as specified in Article 3 of Implementing Regulation (EU) 2022/1362

3.5.11.1.Simulation tool licence number: …

3.5.11.2.Volume oriented heavy goods vehicle: yes/no (⁴) (¹⁷⁶)

4. TRANSMISSION

4.7.Maximum vehicle design speed (in km/h) (⁷⁷): …

5. AXLES

5.1.Description of each axle: …

5.2.Make: …

5.3.Type: …

5.4.Position of retractable axle(s): …

5.5.Position of loadable axle(s): …

6. SUSPENSION

6.2.Type and design of the suspension of each axle or wheel: …

6.2.1.Level adjustment: yes/no/optional (⁴)

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.

9.11. External projections

9.12. Safety belts and/or other restraint systems

9.13. Safety belt anchorages

9.14. Spaces for mounting front and rear registration plates (give ranges where appropriate, drawings may be used where applicable): …

9.15. Rear under-run protection

9.16. Wheel guards

9.17. Statutory plates

9.18. Radio interference/electromagnetic compatibility

9.19. Lateral protection

9.20. Spray-suppression system

9.21. Side-impact resistance

9.22. Front under-run protection

9.23. Pedestrian protection

9.24. Frontal protection systems

9.25. Aerodynamic device or equipment

9.26. Aerodynamic device or equipment on the front of the vehicle

9.27. Aerodynamic device or equipment on the rear of the vehicle

10. LIGHTING AND LIGHT SIGNALLING DEVICES

11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-TRAILERS

12. MISCELLANEOUS

Appendix 1

Appendix 2

Appendix 3

Appendix 4

13. SPECIAL PROVISIONS FOR BUSES AND COACHES

13.2. Area for passengers (m2)

13.3. Number of passengers (seated and standing)

13.4. Number of passengers seated

14. SPECIAL PROVISIONS FOR VEHICLES INTENDED FOR THE TRANSPORT OF DANGEROUS GOODS

14.1. Electrical equipment according to UN Regulation No 105 (97) of the Economic Commission for Europe of the United Nations (UN/ECE)

14.2. Prevention of fire risks

15. REUSABILITY, RECYCLABILITY AND RECOVERABILITY

15.4. Rates

16. ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATION

17. AUTOMATED DRIVING SYSTEM (ADS): yes/no (4)

ANNEX II

PART I

A. Categories M and N

0. GENERAL

1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

2. MASSES AND DIMENSIONS (9) (10) (11)

2.16. Registration/in service maximum permissible masses, vehicle categories M2, M3, N2, N3, O3 and O4 (optional)

3. PROPULSION ENERGY CONVERTER (38)

4. TRANSMISSION(76)

5. AXLES

6. SUSPENSION

7. STEERING

8. BRAKES

9. BODYWORK

11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-TRAILERS

12. MISCELLANEOUS

13. SPECIAL PROVISIONS FOR BUSES AND COACHES

16. ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATION

17. AUTOMATED DRIVING SYSTEM (ADS): yes/no (4)

B. Category O

0. GENERAL

1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

2. MASSES AND DIMENSIONS (9) (10) (11)

4. TRANSMISSION

5. AXLES

6. SUSPENSION

13.2. Area for passengers (m²)

14.1. Electrical equipment according to UN Regulation No 105 (⁹⁷) of the Economic Commission for Europe of the United Nations (UN/ECE)

17. AUTOMATED DRIVING SYSTEM (ADS): yes/no (⁴)

2. MASSES AND DIMENSIONS (⁹) (¹⁰) (¹¹)

3. PROPULSION ENERGY CONVERTER (³⁸)

4. TRANSMISSION(⁷⁶)

17. AUTOMATED DRIVING SYSTEM (ADS): yes/no (⁴)

2. MASSES AND DIMENSIONS (⁹) (¹⁰) (¹¹)