Legalize
Legalize / European Union / Implementing Regulation

Commission Implementing Regulation (EU) 2020/683 of 15 April 2020 implementing Regulation (EU) 2018/858 of the European Parliament and of the Council with regards to the administrative requirements for the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles

Type Implementing Regulation
Publication 2020-05-26
Last updated 2024-01-01
State In force
Department European Commission, GROW
Source EUR-Lex
articles 9
Reform history JSON API
  • However, this Annex applies to EU type-approvals granted in accordance with Regulation (EU) 2019/2144 on the basis of requirements laid down in the UN Regulations listed in Annex II to Regulation (EU) 2018/858, in which case the following numbering system shall apply:
  • 4.1. Section 1:Point 2.1 of this Annex shall apply.
  • 4.2. Section 2:The number of Regulation (EU) 2019/2144 (i.e. ‘2019/2144’)
  • 4.3. Section 3:Section 3 shall be composed of the following elements in the following order:
  • (a) the number of the UN Regulation laying down the applicable requirements-, followed by the letter ‘R’;
  • (b) two digits (with leading zeros as applicable) indicating the series of amendments that lay down the applicable requirements (00 for the original version of the UN Regulation);
  • (c) a slash and the number of the supplement to the original version or series of amendments laying down the applicable requirements (with leading zeros as applicable);
  • (d) the implementing stage, if applicable, a slash and one or two character(s).
  • 4.4. Section 4:Point 2.4 of this Annex shall apply.
  • 4.5. Section 5:Point 2.5 of this Annex shall apply.
  • 4.6.Examples of type-approval certificate numbers
  • 4.6.1.Example of a type-approval granted by Germany in accordance with UN Regulation No 13-H (125) of the Economic Commission for Europe of the United Nations (UN/ECE) Uniform provisions concerning the approval of passenger cars with regard to braking, original series of amendments, supplement 16, first approval granted, no extensions:
  • e12019/214413-HR00/160000100
  • 4.6.2.Example of a type-approval granted by Croatia in accordance with UN Regulation No 46 (126) of the Economic Commission for Europe of the United Nations (UNECE) – Uniform provisions concerning the approval of devices for indirect vision and of motor vehicles with regard to the installation of these device, 04 series of amendments, supplement 1, 123rd approval granted, 5th extension:
  • e252019/214446R04/010012305

ANNEX V

EU type-approval mark of components and separate technical units

  • 1.The EU type-approval mark for components and separate technical units referred to in Article 38(2) of Regulation (EU) 2018/858 shall consist of:
  • 1.1.A rectangle surrounding the lower-case letter ‘e’, followed by the distinguishing number of the Member State which has granted the type-approval for the component or separate technical unit:
1 for Germany; 19 for Romania;
2 for France; 20 for Poland;
3 for Italy; 21 for Portugal;
4 for the Netherlands; 23 for Greece;
5 for Sweden; 24 for Ireland;
6 for Belgium; 25 for Croatia;
7 for Hungary; 26 for Slovenia;
8 for the Czech Republic; 27 for Slovakia;
9 for Spain; 29 for Estonia;
11 for the United Kingdom; 32 for Latvia;
12 for Austria; 34 for Bulgaria;
13 for Luxembourg; 36 for Lithuania;
17 for Finland; 49 for Cyprus;
18 for Denmark; 50 for Malta.
  • 1.2.In the vicinity of the rectangle, two digits indicating the series of amendments laying down the requirements with which this component or separate technical units complies, followed by a space and the five-digit number referred to in point 2.4 of Annex IV.
  • 1.3.An additional symbol or symbols located above the rectangle where required by the regulatory act laying down the applicable requirements.
  • 2.The type-approval mark of components or separate technical units shall be indelible and clearly legible.
  • 3.Example of a type-approval mark for a fourth type-approval of a component granted by Belgium. 01 denotes the series of amendments of the Regulation laying down the applicable requirements with which this component complies.
  • 4.This Annex does not apply to type-approvals granted in accordance with the UN Regulations listed in Annex II to Regulation (EU) 2018/858.
  • However, this Annex applies to EU type-approvals of components and separate technical units granted in accordance with Regulation (EU) 2019/2144 on the basis of the requirements laid down in the UN Regulations listed in Annex I to that Regulation, in which case the following shall apply:
  • (a) the distinguishing type-approval marking shall be as prescribed in the applicable UN Regulation;
  • (b) where the applicable UN Regulation requires a circle surrounding the letter ‘E’ to be part of the type-approval mark, a rectangle rather than a circle shall be used. The height of the rectangle shall correspond to at least the prescribed diameter of the circle and its width shall exceed that value. Instead of the upper-case letter ‘E’, the lower-case letter ‘e’ shall be used, followed by the distinguishing number of the Member State which has granted the EU type approval of the component or separate technical unit.
  • Example of a type-approval mark for a type-approval granted by Germany, on the basis of requirements laid down in the UN Regulation 28 (127) of the Economic Commission for Europe of the United Nations (UN/ECE), on uniform provisions concerning the approval of audible warning devices and of motor vehicles with regard to their audible signals, listed in Annex II to Regulation (EU) 2018/858, original series, first approval issued, for a Class II audible warning device incorporating new technologies:

ANNEX VI

TEMPLATE FOR THE TEST RESULT SHEET

TEST RESULTS SHEET

(To be completed by the type-approval authority and attached to the whole-vehicle EU type-approval certificate referred to in Article 28 of Regulation (EU) 2018/858)

Please indicate clearly to which variant and version of the vehicle the test result applies. Each version shall not have more than one test result. In the case of several test results per version indicating the worst test result, a note shall state that for items marked (*) the worst test results are provided.

1. Results of the sound level tests

Please provide the number of the regulatory act laying down the applicable requirements and the number of its latest amendment. Where the regulatory act provides for two or more implementation stages, please also indicate the implementation stage:
Variant/Version of the vehicle: … … …
Moving (dB(A)/E): … … …
Stationary (dB(A)/E): … … …
at (min– 1): … … …

2. Results of the exhaust emission tests

  • 2.1.Emissions from motor vehicles tested under the test procedure for light-duty vehicles
  • Please provide the number of the regulatory act laying down the applicable requirements or, where amended, the number of its latest amendment. Where the regulatory act provides for two or more implementation stages, please also indicate the implementation stage: …
  • Fuel(s) (128)… (diesel, petrol, LPG, NG, Bi-fuel: petrol/NG, LPG, NG/biomethane, Flex-fuel: petrol/ethanol…) (4) (129)
  • 2.1.1.Type 1 test (130) (131), (vehicle emissions in the test cycle after a cold start)

WLTP highest values
Variant/Version of the vehicle: … … …
CO (mg/km) … … …
THC (mg/km) … … …
NMHC (mg/km) … … …
NOx (mg/km) … … …
THC + NOx (mg/km) … … …
Mass of particulate matter (PM) (mg/km) (if applicable) … … …
Number of particles (PN) (#/km) (if applicable) … … …

Ambient Temperature Correction Test (ATCT)

ATCT Family Interpolation family —-
… … —-
… … —-

Family correction factors

ATCT Family FCF
… …
… …
  • 2.1.2.Type 2 test (130) (131), (emissions data required at type-approval for roadworthiness purposes)
  • Type 2, low idle test:
Variant/Version of the vehicle: … … …
CO (% vol.) … … …
Engine speed (min–1) … … …
Engine oil temperature (°C) … … …
  • Type 2, high idle test:
Variant/Version of the vehicle: … … …
CO (% vol.) … … …
Lambda Value … … …
Engine speed (min–1) … … …
Engine oil temperature (°C) … … …
  • 2.1.3.Type 3 test (emissions of crankcase gases): …
  • 2.1.4.Type 4 test (evaporative emissions): … g/test
  • 2.1.5.Type 5 test (durability of anti-pollution control devices):
  • — Ageing distance covered (km) (e.g. 160000 km): …
  • — Deterioration factor DF: calculated/fixed (4)
  • — Values: Variant/Version of the vehicle: … … … CO … … … THC … … … NMHC … … … NOx … … … THC + NOx … … … Mass of particulate matter (PM) (if applicable) … … … Number of particles (PN) (if applicable) … … …
  • 2.1.6.Type 6 test (average emissions at low ambient temperatures):
Variant/Version of the vehicle: … … …
CO (g/km) … … …
THC (g/km) … … …
  • 2.1.7.OBD: yes/no (4)
  • 2.2.Emissions from engines tested under the test procedure for heavy-duty vehicles.
  • Please provide the number of the regulatory act laying down the applicable requirements or, where amended, the number of its latest amendment. Where the regulatory act provides for two or more implementation stages, please also indicate the implementation stage: ..................
  • Fuel(s) (128) … (diesel, petrol, LPG, NG, ethanol …)
  • 2.2.1.Results of the ESC test (132) (133) (134)
Variant/Version of the vehicle: … … …
CO (mg/kWh) … … …
THC (mg/kWh) … … …
NOx (mg/kWh) … … …
NH3 (ppm) (132) … … …
PM mass (mg/kWh) … … …
PM number (#/kWh) (132) … … …
  • 2.2.2.Result of the ELR test (132)
Variant/Version of the vehicle: … … …
Smoke value: … m–1 … … …
  • 2.2.3.Result of the ETC test (133) (134),
Variant/Version of the vehicle: … … …
CO (mg/kWh) … … …
THC (mg/kWh) … … …
NMHC (mg/kWh) (132) … … …
CH4 (mg/kWh) (132) … … …
NOx (mg/kWh) … … …
NH3 (ppm) (132) … … …
PM mass (mg/kWh) … … …
PM number (#/kWh) (132) … … …
  • 2.2.4.Idle test (132)
Variant/Version of the vehicle: … … …
CO (% vol.) … … …
Lambda Value (132) … … …
Engine speed (min–1) … … …
Engine oil temperature (K) … … …
  • 2.3.Diesel smoke
  • Please provide the number of the regulatory act laying down the applicable requirements or, where amended, the number of its latest amendment. Where the regulatory act provides for two or more implementation stages, please also indicate the implementation stage: ...............
  • 2.3.1.Results of the test under free acceleration
Variant/Version of the vehicle: … … …
Corrected value of the absorption coefficient (m–1) … … …
Normal engine idling speed … … …
Maximum engine speed … … …
Oil temperature (min./max.) … … …

3. Results of the CO2 emission, fuel/electric energy consumption, and electric range tests

Please provide the number of the regulatory act laying down the applicable requirements or, where amended, the number of its latest amendment.: …

  • 3.1.Internal combustion engines, including not externally chargeable hybrid electric vehicles (NOVC) (132) (135)
Variant/Version of the vehicle: … … …
CO2 mass emission (urban conditions) (g/km) … … …
CO2 mass emission (extra-urban conditions) (g/km) … … …
CO2 mass emission (combined) (g/km) … … …
Fuel consumption (urban conditions) (l/100km) (136) … … …
Fuel consumption (extra-urban conditions) (l/100km) (136) … … …
Fuel consumption (combined) (l/100km) (136) … … …
Interpolation family identifier (137) Variant/versions
--- ---
… …
… …
… …
Results: Interpolation family identifier Interpolation family identifier Interpolation family identifier
--- --- --- ---
Results: VH VM (132) VL (132)
CO2 mass emission LOW phase (g/km) … … …
CO2 mass emission MID phase (g/km) … … …
CO2 mass emission HIGH phase (g/km) … … …
CO2 mass emission EXTRA-HIGH phase (g/km) … … …
CO2 mass emission (combined) (g/km) … … …
Fuel consumption LOW phase (l/100km m3/100km kg/100km) … … …
Fuel consumption MID phase (l/100km m3/100km kg/100km) … … …
Fuel consumption HIGH phase (l/100km m3/100km kg/100km) … … …
Fuel consumption EXTRA-HIGH phase (l/100km m3/100km kg/100km) … … …
Fuel consumption (combined) (l/100km m3/100km kg/100km) … … …
f0 (N) … … …
f1 (N/(km/h)) … … …
f2 (N/(km/h) (2)) … … …
RR (kg/t) … … …
Delta CD * A (for VL if applicable compared to VH) (m2) … … …
Test Mass (kg) … … …
Frontal area (m2) (for road load matrix family vehicles only)
  • Repeat for each interpolation family.
  • 3.2.Externally chargeable hybrid electric vehicles (OVC) (132)
Variant/Version of the vehicle: … … …
CO2 mass emission (Condition A, combined) (g/km) … … …
CO2 mass emission (Condition B, combined) (g/km) … … …
CO2 mass emission (weighted, combined) (g/km) … … …
Fuel consumption (Condition A, combined) (l/100km) (g) … … …
Fuel consumption (Condition B, combined) (l/100km) (g) … … …
Fuel consumption (weighted, combined) (l/100km) (g) … … …
Electric energy consumption (Condition A, combined) (Wh/km) … … …
Electric energy consumption (Condition B, combined) (Wh/km) … … …
Electric energy consumption (weighted and combined) (Wh/km) … … …
Pure electric range (km) … … …
Interpolation family number Variant/versions
--- ---
… …
… …
… …
Results: Interpolation family identifier Interpolation family identifier Interpolation family identifier
--- --- --- ---
Results: VH VM(132) VL(132)
CS CO2 mass emission LOW phase (g/km) … …
CS CO2 mass emission MID phase (g/km) … …
CS CO2 mass emission HIGH phase (g/km) … …
CS CO2 mass emission EXTRA-HIGH phase (g/km) … …
CS CO2 mass emission (combined) (g/km) … …
CD CO2 mass emission (combined) (g/km)
CO2 mass emission (weighted, combined) (g/km)
CS Fuel consumption LOW phase (l/100km) … …
CS Fuel consumption MID phase (l/100km) … …
CS Fuel consumption HIGH phase (l/100km) … …
CS Fuel consumption EXTRA-HIGH phase (l/100km) … …
CS Fuel consumption (combined) (l/100km) … …
CD Fuel consumption (combined) (l/100km) … …
Fuel consumption (weighted, combined) (l/100km) … …
ECAC,weighted … …
EAER (combined) … …
EAERcity … …
AER … …
AERcity … …
f0 (N) … …
f1 (N/(km/h)) … …
f2 (N/(km/h) (2)) … …
RR (kg/t) … …
Delta CD× A (for VL or VM compared to VH) (m2) … …
Test Mass (kg) … …
Frontal area (m2) (for road load matrix family vehicles only)
  • Repeat for each interpolation family.
  • 3.3.Pure electric vehicles (132)
Variant/Version of the vehicle: … … …
Electric energy consumption (Wh/km) … … …
Range (km) … … …
Interpolation family number Variant/versions
--- ---
… …
… …
… …
Results: Interpolation family identifier Interpolation family identifier
--- --- --- ---
Results: VH VL
Electric Consumption (Combined) (Wh/km) … …
Pure Electric Range (Combined) (km) … …
Pure Electric Range (City) (km) … …
f0 (N) … …
f1 (N/(km/h)) … …
f2 (N/(km/h) (2)) … …
RR (kg/t) … …
Delta CD× A (for VL compared to VH) (m2) … …
Test Mass (kg) … …
Frontal area (m2) (for road load matrix family vehicles only)
  • 3.4.Hydrogen fuel cell vehicles (132)
Variant/Version of the vehicle: … … …
Fuel consumption (kg/100km) … … …
Variant/Version: Variant/Version:
--- --- ---
Fuel Consumption (Combined) (kg/100km) … …
f0 (N) … …
f1 (N/(km/h)) … …
f2 (N/(km/h) (2) … …
RR (kg/t) … …
Test Mass (kg) …
  • 3.5.1.Deviation factor (if applicable)
  • Repeat for each interpolation family:
  • Interpolation family identifier (140): …
  • 3.5.2.Verification factor (if applicable)
  • Repeat for each interpolation family:
  • Interpolation family identifier (140)
  • 3.5.3.Internal combustion engines, including not externally chargeable hybrid electric vehicles (NOVC) (141) (135)
Final correlated NEDC values Interpolation family identifier Interpolation family identifier
Final correlated NEDC values VH VL (132)
CO2 mass emission (urban conditions) (g/km)
CO2 mass emission (extra-urban conditions) (g/km)
CO2 mass emission (combined) (g/km)
Fuel consumption (urban conditions) (l/100km) (132)
Fuel consumption (extra-urban conditions) (l/100km) (132)
Fuel consumption (combined) (l/100km) (132)
  • 3.5.4.Externally chargeable hybrid electric vehicles (OVC) (132)
Final correlated NEDC values Interpolation family identifier Interpolation family identifier
Final correlated NEDC values VH VL (132)
CO2 mass emission (weighted, combined) (g/km) … …
Fuel consumption (weighted, combined) (l/100km) (g) … …

4. Results of the tests for vehicles fitted with eco-innovation(s) (141) (135) (142)

Tests conducted as required by UN Regulation No 83 (143) (where applicable)

Variant/Version of the vehicle… Variant/Version of the vehicle… Variant/Version of the vehicle… Variant/Version of the vehicle… Variant/Version of the vehicle… Variant/Version of the vehicle… Variant/Version of the vehicle… Variant/Version of the vehicle…
Decision approving the eco-innovation (144) Code of the eco-innovation (145) Type 1/I cycle (NEDC/WLTP) 1. CO2 emissions of the baseline vehicle (g/km) 2. CO2 emissions of the eco-innovation vehicle (g/km) 3. CO2 emissions of the baseline vehicle under Type 1 test-cycle (146) 4. CO2 emissions of the eco-innovation vehicle under Type 1 test-cycle (147) 5. Usage factor (UF) i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings ((1 – 2) – (3 – 4)) × 5
xxx/201x … … … … … … … …
… … … … … … … … …
… … … … … … … … …
Total CO2 emissions savings on NEDC(g/km) (148) Total CO2 emissions savings on NEDC(g/km) (148) Total CO2 emissions savings on NEDC(g/km) (148) Total CO2 emissions savings on NEDC(g/km) (148) Total CO2 emissions savings on NEDC(g/km) (148) Total CO2 emissions savings on NEDC(g/km) (148) Total CO2 emissions savings on NEDC(g/km) (148) …

Test conducted as required by Annex XXI to Commission Regulation (EU) 2017/1151 (149) (where applicable)

Variant/Version … Variant/Version … Variant/Version … Variant/Version … Variant/Version … Variant/Version … Variant/Version … Variant/Version …
Decision approving the eco-innovation (144) Code of the eco-innovation (145) Type 1/I cycle (NEDC/WLTP) 1. CO2 emissions of the baseline vehicle (g/km) 2. CO2 emissions of the eco-innovation vehicle (g/km) 3. CO2 emissions of the baseline vehicle under Type 1 test-cycle(146) 4. CO2 emissions of the eco-innovation vehicle under Type 1 test-cycle 5. Usage factor (UF) i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings ((1 – 2) – (3 – 4)) × 5
xxx/201x … … … … … … … …
… … … … … … … … …
… … … … … … … … …
Total CO2 emissions savings on WLTP(g/km) (150) Total CO2 emissions savings on WLTP(g/km) (150) Total CO2 emissions savings on WLTP(g/km) (150)
  • 4.1.General code of the eco-innovation(s) (151): …

ANNEX VII

FORMAT OF TEST REPORTS FOR THE TYPE-APPROVAL OF A SYSTEM, COMPONENT OR SEPARATE TECHNICAL UNIT

  • 1.For each of the regulatory acts listed in Part I of Annex II to Regulation (EU) 2018/858, the test report referred to in Article 30(2) of Regulation (EU) 2018/858 shall comply with the Standard EN ISO/IEC 17025:2017 (152). It shall in particular include the information referred to in point 7.8.2 of that standard.
  • 2.The test report shall be issued in one of the official languages of the Union determined by the type-approval authority.
  • 3.The test report shall include at least the following information:
  • (a) the identification of the vehicle, system, component or separate technical unit tested;
  • (b) a detailed description of the, vehicle, system, component or separate technical unit characteristics required by the applicable regulatory act listed in Annex II to Regulation (EU) 2018/858;
  • (c) the results of the measurements required by the applicable regulatory act;
  • (d) with regard to each measurement mentioned in point 3(c), whether the limit or threshold laid down by the applicable regulatory act has been met;
  • (e) when other test methods than those prescribed in the applicable regulatory acts are permitted and used, the report shall include a description of those test methods;
  • (f) pictures taken during testing, the number of which shall be decided by the approval authority. In the case of virtual testing, screen prints or other suitable evidence may replace pictures;
  • (g) overall test conclusions that describes that the system, component or separate technical unit in the test report is in compliance with all the requirements of the applicable regulatory act listed in Annex II to Regulation (EU) 2018/858 and that the tested system, component or separate technical unit was representative in terms of the type to be approved;
  • (h) opinions and interpretations shall be documented properly and marked as such in the test report.
  • 4.Where the manufacturer and the type-approval authority or technical service have reached an agreement on a worst-case configuration, testing of that configuration alone shall be sufficient. The test report shall include the information how the worst-case configuration of the system, component or separate technical unit has been determined.
  • 5.If a format of a test report is provided in the respective Regulatory act listed in Part I of Annex II to Regulation (EU) 2018/858 that model shall be used.

ANNEX VIII

CERTIFICATE OF CONFORMITY IN PAPER FORMAT

0. OBJECTIVES

The certificate of conformity shall include:

  • (a) the Vehicle Identification Number;
  • (b) the date of manufacture of the vehicle;
  • (c) the exact technical characteristics of the vehicle as well as its technical performance in concrete terms (It is not permitted to mention any range of value in the various entries, except in cases where this in the nature of the vehicle (e.g. trailers with extendible chassis, tractor unit for semi-trailer with adjustable fifth wheel coupling).

1. GENERAL DESCRIPTION

  • 1.1.The certificate of conformity in paper format shall consist of the following two parts.
  • (a) Part 1, which consists of a statement of compliance by the manufacturer and which is common to all vehicle categories.
  • (b) Part 2, which is a technical description of the main characteristics of the vehicle and which is adapted to each specific vehicle category.
  • 1.2.The certificate of conformity in paper format shall be of maximum format A4 (210 × 297 mm) and conform to the templates set out in the Appendix.
  • 1.3.The technical descriptions indicated in Part 2 of the certificate of conformity in paper format shall be those given in the type-approval documentation of the relevant regulatory acts.
  • 1.4.All information on the certificate of conformity in paper format shall be provided in ISO 8859 series characters (for certificates of conformity in paper format issued in Bulgarian in Cyrillic characters, for certificates of conformity in paper format issued in Greek in Greek characters) and Arabic numerals.

2. SPECIAL PROVISIONS

  • 2.1.Model A of the certificate of conformity in paper format shall be used for complete vehicles
  • 2.2.Model B of the certificate of conformity in paper format shall be used for completed vehicles
  • The additional technical characteristics of the vehicle as well as its technical performance in concrete terms added during the multi-stage type-approval process shall be described briefly.
  • 2.3.Model C of the certificate of conformity shall be used for incomplete vehicles.

3. PAPER AND SECURITY PRINTING FEATURES TO PREVENT FORGERY

To prevent forgery, the certificate of conformity shall be protected by coloured graphics and at least one of the following:

  • (a) a watermark in the form of the registered mark of the manufacturer;
  • (b) another security printing feature (e.g. ultraviolet fluorescent ink, inks with viewing angle-dependent colour, inks with temperature-dependent colour, micro printing, guilloche printing, iridescent printing, laser engraving, custom holograms, variable laser images, optical variable images, physically embossed or engraved manufacturer’s logo, etc.).

Appendix

TEMPLATES FOR THE CERTIFICATE OF CONFORMITY IN PAPER FORMAT

PART I

COMPLETE AND COMPLETED VEHICLES

MODEL A1 —PART 1
COMPLETE VEHICLES
CERTIFICATE OF CONFORMITY

Part 1

The undersigned [… (Full name and position)] hereby certifies that the vehicle:

  • 0.1.Make (Trade name of manufacturer): …
  • 0.2.Type: …
  • — Variant (153): …
  • — Version (153): …
  • 0.2.1.Commercial name(s): …
  • 0.2.2.1.Allowed Parameter Values for multistage type approval to use the base vehicle emission values (insert range where applicable) (1):

Final Vehicle actual mass: …

Final Vehicle technically permissible maximum laden mass (in kg): …

Frontal area for final vehicle (in cm2): …

Rolling resistance (kg/t): …

Cross-sectional area of air entrance of the front grille (in cm2): …

  • 0.2.3.Identifiers (1):
  • 0.2.3.1.Interpolation family’s identifier: …
  • 0.2.3.2.ATCT family’s identifier: …
  • 0.2.3.3.PEMS family’s identifier: …
  • 0.2.3.4.Roadload family’s identifier: …
  • 0.2.3.5.Roadload Matrix family’s identifier (if applicable): …
  • 0.2.3.6.Periodic regeneration family’s identifier: …
  • 0.2.3.7.Evaporative test family’s identifier: …
  • 0.4.Vehicle category: …
  • 0.5.Company name and address of manufacturer: …
  • 0.6.Location and method of attachment of the statutory plates: …
  • Location of the vehicle identification number: …
  • 0.9.Name and address of the manufacturer’s representative (if any): …
  • 0.10.Vehicle identification number: …
  • 0.11.Date of manufacture of the vehicle: …
  • conforms in all respects to the type described in approval (… number of the type-approval certificate, including extension number) granted on (… date of the type-approval) and can be permanently registered in Member States having right/left (154) hand traffic and using metric/imperial (155) units for the speedometer and metric/imperial (155) units for the odometer (if applicable) (156).
(Place) (Date): … (Signature): …
MODEL A2 —PART 1
COMPLETE VEHICLES TYPE-APPROVED IN SMALL SERIES
[Year] [Sequential number]
CERTIFICATE OF CONFORMITY

Part 1

The undersigned [… (Full name and position)] hereby certifies that the vehicle:

  • 0.1.Make (Trade name of manufacturer): …
  • 0.2.Type: …
  • — Variant (153): …
  • — Version (153): …
  • 0.2.1.Commercial name(s): …
  • 0.2.2.1.Allowed Parameter Values for multistage type approval to use the base vehicle emission values (insert range where applicable) (1):

Final Vehicle actual mass: …

Final Vehicle technically permissible maximum laden mass (in kg): …

Frontal area for final vehicle (in cm2): …

Rolling resistance (kg/t): …

Cross-sectional area of air entrance of the front grille (in cm2): …

  • 0.2.3.Identifiers (1):
  • 0.2.3.1.Interpolation family’s identifier: …
  • 0.2.3.2.ATCT family’s identifier: …
  • 0.2.3.3.PEMS family’s identifier: …
  • 0.2.3.4.Roadload family’s identifier: …
  • 0.2.3.5.Roadload Matrix family’s identifier (if applicable): …
  • 0.2.3.6.Periodic regeneration family’s identifier: …
  • 0.2.3.7.Evaporative test family’s identifier: …
  • 0.4.Vehicle category: …
  • 0.5.Company name and address of manufacturer: …
  • 0.6.Location and method of attachment of the statutory plates: …
  • Location of the vehicle identification number: …
  • 0.9.Name and address of the manufacturer’s representative (if any): …
  • 0.10.Vehicle identification number: …
  • 0.11.Date of manufacture of the vehicle: …
  • conforms in all respects to the type described in approval (… number of the type-approval certificate, including extension number) granted on (… date of the type-approval) and can be permanently registered in Member States having right/left (154) hand traffic and using metric/imperial (155) units for the speedometer and metric/imperial (155) units for the odometer (if applicable) (156).
(Place) (Date): … (Signature): …
MODEL B —PART 1
COMPLETED VEHICLES
CERTIFICATE OF CONFORMITY

Part 1

The undersigned [… (Full name and position)] hereby certifies that the vehicle:

  • 0.1.Make (Trade name of the manufacturer): …
  • 0.2.Type: …
  • — Variant (153): …
  • — Version (153): …
  • 0.2.1.Commercial name(s): …
  • 0.2.2.For multi-stage approved vehicles, type-approval information of the base/previous stages vehicle (list the information for each stage):
  • — Type: …
  • — Variant (153): …
  • — Version (153): …
  • Number of the type-approval certificate, including the extension number: …
  • 0.2.2.1.Allowed Parameter Values for multistage type approval to use the base vehicle emission values (insert range where applicable) (1):

Final Vehicle actual mass: …

Final Vehicle technically permissible maximum laden mass (in kg): …

Frontal area for final vehicle (in cm2): …

Rolling resistance (kg/t): …

Cross-sectional area of air entrance of the front grille (in cm2): …

  • 0.2.3.Identifiers (1):
  • 0.2.3.1.Interpolation family’s identifier: …
  • 0.2.3.2.ATCT family’s identifier: …
  • 0.2.3.3.PEMS family’s identifier: …
  • 0.2.3.4.Roadload family’s identifier: …
  • 0.2.3.5.Roadload Matrix family’s identifier (if applicable): …
  • 0.2.3.6.Periodic regeneration family’s identifier: …
  • 0.2.3.7.Evaporative test family’s identifier: …
  • 0.4.Vehicle category: …
  • 0.5.Company name and address of manufacturer: …
  • 0.5.1.For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle…
  • 0.6.Location and method of attachment of the statutory plates: …
  • Location of the vehicle identification number: …
  • 0.9.Name and address of the manufacturer’s representative (if any): …
  • 0.10.Vehicle identification number: …
  • 0.11.Date of manufacture of the vehicle: …
  • (a) has been completed and altered (4) as follows: … and
  • (b) conforms in all respects to the type described in approval (... number of the type-approval certificate, including extension number) granted on (… date of the type-approval) and
  • (c) can be permanently registered in Member States having right/left (154) hand traffic and using metric/imperial (155) units for the speedometer and metric/imperial (155) units for the odometer (if applicable) (156). (Place) (Date): … (Signature): …
  • Attachments:Certificate of conformity delivered at each previous stage.
PART 2
VEHICLE CATEGORY M1

(complete and completed vehicles)

Part 2

General construction characteristics
  • 1.Number of axles: … and wheels (5): …
  • 3.Powered axles (number, position, interconnection): … …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (8)
Main dimensions
  • 4.Wheelbase (157): … mm
  • 4.1.Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
  • 5.Length: … mm
  • 6.Width: … mm
  • 7.Height: … mm
Masses (158)
  • 13.Mass in running order: … kg
  • 13.2.Actual mass of the vehicle: … kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
1. … kg
2. … kg
3. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static vertical mass at the coupling point: … kg
Power plant
  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual-fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …
  • 28.1.Gearbox ratios (to complete for vehicles with manual shift transmissions) (1)
1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear 8th gear …
  • 28.1.1.Final drive ratio (if applicable): …
  • 28.1.2.Final drive ratios (to complete if and where applicable)
1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear 8th gear …
Maximum speed
  • 29.Maximum speed: … km/h
Axles and suspension
  • 30.Axle(s) track:
1. … mm
2. … mm
3. … mm
  • 35.Fitted tyre/wheel combination/energy efficiency class of rolling resistance coefficients (RRC) and tyre category used for CO2 determination (if applicable) (160) (1): …
Brakes
  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)
Bodywork
  • 38.Code for bodywork (113): …
  • 40.Colour of vehicle (114): …
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …
  • 42.1.Seat(s) designated for use only when the vehicle is stationary: …
  • 42.3.Number of wheelchair user accessible position: …
Environmental performances
  • 46.Sound level
  • — Stationary: … dB(A) at engine speed: … min-1
  • — Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro…
  • 47.1.Parameters for emission testing of Vind (1)
  • 47.1.1.Test mass, kg: …
  • 47.1.2.Frontal area, m2 (161): …
  • 47.1.2.1.Projected frontal area of air entrance of the front grille (if applicable), cm2: …
  • 47.1.3.Road load coefficients
  • 47.1.3.0.f0, N: …
  • 47.1.3.1.f1, N/(km/h): …
  • 47.1.3.2.f2, N/(km/h)2: …
  • 47.2.Driving cycle (1)
  • 47.2.1.Driving Cycle class: 1/2/3a/3b (4)
  • 47.2.2.Downscaling factor (fdsc): …
  • 47.2.3.Capped speed: yes/no (4)
  • 48.Exhaust emissions (162) (163) (164):
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 1.2. Test procedure: Type 1 (WLTP highest values) or WHSC (EURO VI) (4)
  • CO: … THC: … NMHC: … NOx: … THC + NOx: … NH3: … Particulates (mass): …
  • Particles (number): …
  • 2.2. test procedure: WHTC (EURO VI)
  • CO: … NOx: … NMHC: … THC: … CH4: … NH3: … Particulates (mass): …Particles (number): …
  • 48.1.Smoke corrected absorption coefficient: … (m–1)
  • 48.2.Declared maximum RDE values (if applicable)
  • Complete RDE trip: NOx: …, Particles (number): …
  • Urban RDE trip: NOx: …, Particles (number): …
  • 49.CO2 emissions/fuel consumption/electric energy consumption (162) (1):
  • 1.All powertrains, except OVC hybrid electric (if applicable)
  • 2.Electric range of pure electric vehicles (if applicable)
  • 3.Vehicle fitted with eco-innovation(s): yes/no (4)
  • 3.1.General code of the eco-innovation(s) (151): …
  • 3.2.Total CO2 emissions savings due to the eco-innovation(s) (150) (repeat for each reference fuel tested):
  • 3.2.2.WLTP savings: … g/km (if applicable)
  • 4.OVC hybrid electric vehicles (if applicable)
  • 5.Electric range of OVC hybrid electric vehicles (if applicable)
Miscellaneous
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks (165): …
  • Additional tyre/wheel combinations: technical parameters (no reference to RR)
  • 54.Vehicle fitted with: TPMS/ELKS/AEBS/ESS/AIF/ISA/DDAW/ADDW/EDR/DAM/ADS/eCall (4) (181)
  • 55.Vehicle certified in accordance with UN Regulation No 155: yes/no (4)
  • 56.Vehicle certified in accordance with UN Regulation No 156: yes/no (4)
PART 2
VEHICLE CATEGORY M2

(complete and completed vehicles)

Part 2

General construction characteristics
  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: … 2. Steered axles (number, position): …
  • 3.Powered axles (number, position, interconnection): … …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (8)
Main dimensions
  • 4.Wheelbase (157): … mm
  • 4.1.Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
  • 5.Length: … mm
  • 5.2.Elongated Cabs complying with Article 9a of Directive 96/53/EC: yes/no (4)
  • 5.3.Vehicle equipped with aerodynamic device or equipment on the front/rear/not equipped (4)
  • 6.Width: … mm
  • 7.Height: … mm
  • 9.Distance between the front end of the vehicle and the centre of the coupling device: … mm
  • 12.Rear overhang: … mm
Masses (158)
  • 13.Mass in running order: … kg
  • 13.1.Distribution of this mass amongst the axles:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 13.2.Actual mass of the vehicle: … kg
  • 13.3.Additional mass for alternative propulsion: … kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 16.3.Technically permissible mass on each axle group:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 17.Intended registration/in service maximum permissible masses in national/international traffic (4) (166)
  • 17.1.Intended registration/in service maximum permissible laden mass: … kg
  • 17.2.Intended registration/in service maximum permissible laden mass on each axle:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 17.3.Intended registration/in service maximum permissible laden mass on each axle group:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 17.4.Intended registration/in service maximum permissible mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static mass at the coupling point: … kg
Power plant
  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual-fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …
  • 28.1. Gearbox ratios (to complete for vehicles with manual shift transmissions) (1)
1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear 8th gear …
  • 28.1.1.Final drive ratio (if applicable): …
  • 28.1.2.Final drive ratios (to complete if and where applicable)
1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear 8th gear …
Maximum speed
  • 29.Maximum speed: … km/h
Axles and suspension
  • 30.Axle(s) track:
    1. … mm
    1. … mm
    1. … mm etc.
  • 33.Drive axle(s) fitted with air suspension or equivalent: yes/no (4)
  • 35.Fitted tyre/wheel combination/energy efficiency class of rolling resistance coefficients (RRC) and tyre category used for CO2 determination (if applicable) (160) (1): …
Brakes
  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)
  • 37.Pressure in feed line for trailer braking system: … kPa
Bodywork
  • 38.Code for bodywork (113): …
  • 39.Class of vehicle: class I/Class II/Class III/Class A/Class B (4)
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …
  • 42.1.Seat(s) designated for use only when the vehicle is stationary: …
  • 42.3.Number of wheelchair user accessible position: …
  • 43.Number of standing places: …
Coupling device
  • 44.Number of the approval certificate or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …
Environmental performances
  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min–1
  • Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro …
  • 47.1.Parameters for emission testing of Vind (1)
  • 47.1.1.Test mass, kg: …
  • 47.1.2.Frontal area, m2 (161): …
  • 47.1.2.1.Projected frontal area of air entrance of the front grille (if applicable), cm2: …
  • 47.1.3.Road load coefficients
  • 47.1.3.0.f0, N:
  • 47.1.3.1.f1, N/(km/h):
  • 47.1.3.2.f2, N/(km/h)2: …
  • 47.2.Driving cycle (1)
  • 47.2.1.Driving Cycle class: 1/2/3a/3b
  • 47.2.2.Downscaling factor (fdsc): …
  • 47.2.3.Capped speed: yes/no (4)
  • 48.Exhaust emissions (162) (163) (164):
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 1.2. Test procedure: Type 1 (WLTP highest values) or WHSC (EURO VI) (4)
  • CO: … THC: … NMHC: … NOx: … THC + NOx: … NH3: … Particulates (mass): …
  • Particles (number): …
  • 2.2. test procedure: WHTC (EURO VI)
  • CO: … NOx: … NMHC: … THC: … CH4: … NH3: … Particulates (mass): … Particles (number): …
  • 48.1.Smoke corrected absorption coefficient: … (m–1)
  • 48.2.Declared maximum RDE values (if applicable)
  • Complete RDE trip: NOx: …, Particles (number): …
  • Urban RDE trip: NOx: …, Particles (number): …
  • 49.CO2 emissions/fuel consumption/electric energy consumption (162) (1):
  • 1.All powertrains, except OVC hybrid electric (if applicable)
  • 2.Electric range of pure electric vehicles (if applicable)
  • 4.OVC hybrid electric vehicles (if applicable)
  • 5.Electric range of OVC hybrid electric vehicles (if applicable)
  • 49.1.Cryptographic hash of the manufacturer’s records file (4) (119): …
  • 49.2.Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
  • 49.3.Vocational vehicle: (yes/no) (4) (72) (170)
  • 49.4.Cryptographic hash of the customer information file: … (4) (120) (170)
  • 49.5.1.Specific CO2 emissions: ... gCO2/pkm (4) (171)
  • 49.6.Average occupancy (number of persons): … (4) (172)
  • 49.7.Vehicle subgroup/group (4) (176): …
Miscellaneous
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks (165): …
  • 54.Vehicle fitted with: TPMS/AEBS/ESS/AIF/ISA/DDAW/ADDW/BSIS/EDR/DAM/ADS/Platooning (4) (181)
  • 55.Vehicle certified in accordance with UN Regulation No 155: yes/no (4)
  • 56.Vehicle certified in accordance with UN Regulation No 156: yes/no (4)
PART 2
VEHICLE CATEGORY M3

(complete and completed vehicles)

Part 2

General construction characteristics
  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: … 2. Steered axles (number, position): …
  • 3.Powered axles (number, position, interconnection): … …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (8)
Main dimensions
  • 4.Wheelbase (157): … mm
  • 4.1.Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
  • 5.Length: … mm
  • 5.2.Elongated Cabs complying with Article 9a of Directive 96/53/EC: yes/no (4)
  • 5.3.Vehicle equipped with aerodynamic device or equipment on the front/rear/not equipped (4)
  • 6.Width: … mm
  • 7.Height: … mm
  • 9.Distance between the front end of the vehicle and the centre of the coupling device: … mm
  • 12.Rear overhang: … mm
Masses (158)
  • 13.Mass in running order: … kg
  • 13.1.Distribution of this mass amongst the axles:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 13.2.Actual mass of the vehicle: … kg
  • 13.3.Additional mass for alternative propulsion: … kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 16.3.Technically permissible mass on each axle group:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 17.Intended registration/in service maximum permissible masses in national/international traffic (4) (166)
  • 17.1.Intended registration/in service maximum permissible laden mass: … kg
  • 17.1.Intended registration/in service maximum permissible laden mass: … kg
  • 17.2.Intended registration/in service maximum permissible laden mass on each axle:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 17.3.Intended registration/in service maximum permissible laden mass on each axle group:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 17.4.Intended registration/in service maximum permissible mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static mass at the coupling point: … kg
Power plant
  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual-fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …
Maximum speed
  • 29.Maximum speed: … km/h
Axles and suspension
  • 30.Axle(s) track:
    1. … mm
    1. … mm
    1. … mm etc.
  • 32.Position of loadable axle(s): …
  • 33.Drive axle(s) fitted with air suspension or equivalent: yes/no (4)
  • 35.Tyre/wheel combination (160): …
Brakes
  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)
  • 37.Pressure in feed line for trailer braking system: … kPa
Bodywork
  • 38.Code for bodywork (113): …
  • 39.Class of vehicle: class I/Class II/Class III/Class A/Class B (4)
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …
  • 42.1.Seat(s) designated for use only when the vehicle is stationary: …
  • 42.2.Number of passenger seating positions: … (lower deck) … (upper deck) (including the driver) (167)
  • 42.3.Number of wheelchair user accessible position: …
  • 43.Number of standing places: …
Coupling device
  • 44.Number of the approval certificate or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …
  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min–1
  • Drive-by: … dB(A
  • 47.Exhaust emission level (116): Euro …
  • 48.Exhaust emissions (162) (163) (164):
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 1.2. test procedure: WHSC (EURO VI)
  • CO: … THC: … NMHC: … NOx: … THC + NOx: … NH3: … Particulates (mass): … Particles (number): …
  • 2.2 test procedure: WHTC (EURO VI)
  • CO: … NOx: … NMHC: … THC: … CH4: … NH3: … Particulates (mass): … Particles (number): …
  • 48.1.Smoke corrected absorption coefficient: … (m–1)
  • 49.CO2 emissions/fuel consumption/electric energy consumption (4)
  • 49.1.Cryptographic hash of the manufacturer’s records file (4) (119): …
  • 49.2.Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
  • 49.3.Vocational vehicle: (yes/no) (4) (72) (170)
  • 49.4.Cryptographic hash of the customer information file: … (4) (120) (170)
  • 49.5.1.Specific CO2 emissions: ... gCO2/pkm (4) (171)
  • 49.6.1.Average occupancy (number of persons): … (4) (172)
  • 49.7.Vehicle subgroup/group (4) (176): …
Miscellaneous
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks (165): …
  • 54.Vehicle fitted with: TPMS/ESS/AIF/AEBS/ISA/DDAW/ADDW/BSIS/EDR/DAM/ADS/Platooning (4) (181)
  • 55.Vehicle certified in accordance with UN Regulation No 155: yes/no (4)
  • 56.Vehicle certified in accordance with UN Regulation No 156: yes/no (4)
PART 2
VEHICLE CATEGORY N1

(complete and completed vehicles)

Part 2

General construction characteristics
  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: …
  • 3.Powered axles (number, position, interconnection): … …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (8)
Main dimensions
  • 4.Wheelbase (157): … mm
  • 4.1.Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
  • 5.Length: … mm
  • 6.Width: … mm
  • 7.Height: … mm.
  • 8.Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
  • 9.Distance between the front end of the vehicle and the centre of the coupling device: … mm
  • 11.Length of the loading area: … mm
Masses158
  • 13.Mass in running order: … kg
  • 13.1.Distribution of this mass amongst the axles:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 13.2.Actual mass of the vehicle: … kg
  • 14.Mass of the base vehicle in running order: … kg (4) (168)
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.2.Semi-trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static mass at the coupling point: … kg
Power plant
  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual-fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …
  • 28.1.Gearbox ratios (to complete for vehicles with manual shift transmissions) (1)
1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear 8th gear …
  • 28.1.1.Final drive ratio (if applicable): …
  • 28.1.2.Final drive ratios (to complete if and where applicable)
1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear 8th gear …
Maximum speed
  • 29.Maximum speed: … km/h
Axles and suspension
  • 30.Axle(s) track:
    1. … mm
    1. … mm
    1. … mm
  • 35.Fitted tyre/wheel combination/energy efficiency class of rolling resistance coefficients (RRC) and tyre category used for CO2 determination (if applicable) (160) (1): …
Brakes
  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)
  • 37.Pressure in feed line for trailer braking system: … kPa
  • 38.Code for bodywork (113): …
  • 40.Colour of vehicle (114): …
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …
Coupling device
  • 44.Number of the approval certificate or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …
Environmental performances
  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min–1
  • Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro …
  • 47.1.Parameters for emission testing of Vind (1)
  • 47.1.1.Test mass, kg: …
  • 47.1.2.Frontal area, m2 (161): …
  • 47.1.2.1.Projected frontal area of air entrance of the front grille (if applicable), cm2: …
  • 47.1.3.Road load coefficients
  • 47.1.3.0.f0, N: …
  • 47.1.3.1.f1, N/(km/h): …
  • 47.1.3.2.f2, N/(km/h)2: …
  • 47.2.Driving cycle (1)
  • 47.2.1.Driving Cycle class: 1/2/3a/3b (4)
  • 47.2.2.Downscaling factor (fdsc): …
  • 47.2.3.Capped speed: yes/no (4)
  • 48.Exhaust emissions (162) (163) (164):
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 1.2. Test procedure: Type 1 (WLTP highest values) or WHSC (EURO VI) (4)
  • CO: … THC: … NMHC: … NOx: … THC + NOx: … NH3: … Particulates (mass): … Particles (number): …
  • 2.2. test procedure: WHTC (EURO VI)
  • CO: … NOx: … NMHC: … THC: … CH4: … NH3: … Particulates (mass): … Particles (number): …
  • 48.1.Smoke corrected absorption coefficient: … (m–1)
  • 48.2.Declared maximum RDE values (if applicable)
  • Complete RDE trip: NOx: …, Particles (number): …
  • Urban RDE trip: NOx: …, Particles (number): …
  • 49.CO2 emissions/fuel consumption/electric energy consumption (162) (1):
  • 1.All powertrains, except OVC hybrid electric (if applicable)
  • 2.Electric range of pure electric vehicles (if applicable)
  • 3.Vehicle fitted with eco-innovation(s): yes/no (4)
  • 3.1.General code of the eco-innovation(s) (151)
  • 3.2.Total CO2 emissions saving due to the eco-innovation(s) (68) (repeat for each reference fuel tested):
  • 3.2.2.WLTP savings:… g/km (if applicable)
  • 4.OVC hybrid electric vehicles (if applicable)
  • 5.Electric range of OVC hybrid electric vehicles (if applicable)
Miscellaneous
  • 50.Type-approved in accordance with the design requirements for transporting dangerous goods of UN Regulation No 105 of the Economic Commission for Europe of the United Nations: yes/class(es): …/no (4):
  • 51.For special purpose vehicles: designation in accordance with point 5 of Part A of Annex I to Regulation (EU) 2018/858 of the European Parliament and of the Council: …
  • 52.Remarks (165): …
  • List of tyres: technical parameters (no reference to RR)
  • 54.Vehicle fitted with: TPMS/ELKS/AEBS/ESS/AIF/ISA/DDAW/ADDW/EDR/DAM/ADS/eCall (4) (181)
  • 55.Vehicle certified in accordance with UN Regulation No 155: yes/no (4)
  • 56.Vehicle certified in accordance with UN Regulation No 156: yes/no (4)
PART 2
VEHICLE CATEGORY N2

(complete and completed vehicles)

Part 2

General construction characteristics
  • 1.Number of axles: … and wheels (5): …
  • 1.1.Number and position of axles with twin wheels: …2. Steered axles (number, position): …
  • 3.Powered axles (number, position, interconnection): …
  • 3.1.Specify if the vehicle is non-automated/automated/fully automated (8)
Main dimensions
  • 4.Wheelbase (157): … mm
  • 4.1.Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
  • 5.Length: … mm
  • 5.2.Elongated Cabs complying with Article 9a of Directive 96/53/EC: yes/no (4)
  • 5.3.Vehicle equipped with aerodynamic device or equipment on the front/rear/not equipped (4)
  • 6.Width: … mm
  • 7.Height (1): … mm
  • 8.Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
  • 9.Distance between the front end of the vehicle and the centre of the coupling device: … mm
  • 11.Length of the loading area: … mm
  • 12.Rear overhang: … mm
Masses (158)
  • 13.Mass in running order: … kg
  • 13.1.Distribution of this mass amongst the axles:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 13.2.Actual mass of the vehicle: … kg
  • 13.3.Additional mass for alternative propulsion: … kg
  • 16.Technically permissible maximum masses
  • 16.1.Technically permissible maximum laden mass: … kg
  • 16.2.Technically permissible mass on each axle:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 16.3.Technically permissible mass on each axle group:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 16.4.Technically permissible maximum mass of the combination: … kg
  • 17.Intended registration/in service maximum permissible masses in national/international traffic (4) (166)
  • 17.1.Intended registration/in service maximum permissible laden mass: … kg
  • 17.2.Intended registration/in service maximum permissible laden mass on each axle:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 17.3.Intended registration/in service maximum permissible laden mass on each axle group:
    1. … kg
    1. … kg
    1. … kg, etc.
  • 17.4.Intended registration/in service maximum permissible mass of the combination: … kg
  • 18.Technically permissible maximum towable mass in case of:
  • 18.1.Drawbar trailer: … kg
  • 18.2.Semi-trailer: … kg
  • 18.3.Centre-axle trailer: … kg
  • 18.3.1.Rigid drawbar trailer: … kg
  • 18.4.Unbraked trailer: … kg
  • 19.Technically permissible maximum static mass at the coupling point: … kg
Power plant
  • 20.Manufacturer of the engine: …
  • 21.Engine code as marked on the engine: …
  • 22.Working principle: …
  • 23.Pure electric: yes/no (4)
  • 23.1.Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
  • 24.Number and arrangement of cylinders: …
  • 25.Engine capacity: … cm3
  • 26.Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
  • 26.1.Mono fuel/Bi fuel/Flex fuel/Dual-fuel (4)
  • 26.2.(Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
  • 27.Maximum power
  • 27.1.Maximum net power (159): … kW at … min–1 (internal combustion engine) (4)
  • 27.3.Maximum net power: … kW (electric motor) (4) (112)
  • 27.4.Maximum 30 minutes power: … kW (electric motor) (4) (112)
  • 28.Gearbox (type): …
  • 28.1.Gearbox ratios (to complete for vehicles with manual shift transmissions) (1)
1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear 8th gear …
  • 28.1.1.Final drive ratio (if applicable): …
  • 28.1.2.Final drive ratios (to complete if and where applicable)
1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear 8th gear …
Maximum speed
  • 29.Maximum speed: … km/h
Axles and suspension
  • 31.Position of lift axle(s): …
  • 32.Position of loadable axle(s): …
  • 33.Drive axle(s) fitted with air suspension or equivalent: yes/no (4)
  • 35.Fitted tyre/wheel combination/energy efficiency class of rolling resistance coefficients (RRC) and tyre category used for CO2 determination (if applicable) (160) (1): …
Brakes
  • 36.Trailer brake connections mechanical/electric/pneumatic/hydraulic (4)
  • 37.Pressure in feed line for trailer braking system: … kPa
Bodywork
  • 38.Code for bodywork (113): …
  • 41.Number and configuration of doors: …
  • 42.Number of seating positions (including the driver) (115): …
Coupling device
  • 44.Number of the approval certificate or approval mark of coupling device (if fitted): …
  • 45.1.Characteristics values (4): D: …/V: …/S: …/U: …
Environmental performances
  • 46.Sound level
  • Stationary: … dB(A) at engine speed: … min–1
  • Drive-by: … dB(A)
  • 47.Exhaust emission level (116): Euro …
  • 47.1.Parameters for emission testing of Vind (1)
  • 47.1.1.Test mass, kg: …
  • 47.1.2.Frontal area, m2 (161): …
  • 47.1.2.1.Projected frontal area of air entrance of the front grille (if applicable), cm2: …
  • 47.1.3.Road load coefficients
  • 47.1.3.0.f0, N: …
  • 47.1.3.1.f1, N/(km/h): …
  • 47.1.3.2.f2, N/(km/h)2: …
  • 47.2.Driving cycle (1)
  • 47.2.1.Driving Cycle class: 1/2/3a/3b (4)
  • 47.2.2.Downscaling factor (fdsc): …
  • 47.2.3.Capped speed: yes/no (4)
  • 48.Exhaust emissions (162) (163) (164):
  • Number of the base regulatory act and latest amending regulatory act applicable: …
  • 1.2. Test procedure: Type 1 (WLTP highest values) or WHSC (EURO VI) (4)
  • CO: … THC: … NMHC: … NOx: … THC + NOx: … NH3: … Particulates (mass): … Particles (number): …
  • 2.2. test procedure: WHTC (EURO VI)
  • CO: … NOx: … NMHC: … THC: … CH4: … NH3: … Particulates (mass): … Particles (number): …
  • 48.1.Smoke corrected absorption coefficient: … (m–1)
  • 48.2.Declared maximum RDE values (if applicable)
  • Complete RDE trip: NOx: …, Particles (number): …
  • Urban RDE trip: NOx: …, Particles (number): …
    1. CO2 emissions/fuel consumption/electric energy consumption (162) (169) (1):
  • 1.All powertrains, except OVC hybrid electric (if applicable)
  • 2.Electric range of pure electric vehicles (if applicable)
  • 4.OVC hybrid electric vehicles (if applicable)
  • 5.Electric range of OVC hybrid electric vehicles (if applicable)
  • 49.1.Cryptographic hash of the manufacturer’s records file (119): ........................................................................
  • 49.2.Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
  • 49.3.Vocational vehicle: (yes/no) (4) (72) (170)
  • 49.4.Cryptographic hash of the customer information file: .................................................................. (120) (170)
  • 49.5.Specific CO2 emissions: ... gCO2/tkm (171)
  • 49.6.Average payload value: ................ t’ (172)
  • 49.7.Vehicle subgroup/group (4) (176): …
Miscellaneous

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.